稀土锰氧化物La0.7Ca0.3Mn1-xCuxO3低场磁电阻及电传输特性研究

采用溶胶-凝胶法制备了系列多晶CMR材料La0.7Ca0.3Mn1-xCuxO3（x=0%,1%,5%,10%,15%,20%）。在77-350 K温度范围内测量了样品的电阻率及磁电阻大小。实验结果发现：系列样品TC随掺杂量增加而递减;系列样品的电阻率峰及磁电阻峰在整个测温范围内随掺杂量的增加均依次被展宽直至消失,当掺杂量为x≥10%时,电阻率随温度的变化在整个测温范围内呈现绝缘相行为;同时还发现,掺杂量为x≥10%时,样品的磁电阻在整个测温区内基本表现为隧穿磁电阻。基于我们采用蒙特卡罗模拟方法提出的逾渗模型及隧穿磁电阻模型,对样品的磁电阻行为进行了很好的解释。对系列样品的ρ-T曲线进行lnρ-T^-（1/4）系拟合,发现掺杂量为x=10%样品在整个温区内的lnρ-T^-（1/4）系基本呈线性。     

La_(0.67)Sr_(0.33)Fe_xMn_(1-x)O_3制备和奇特磁电阻效应

系列陶瓷氧化物La0.67Sr0.33FexMn1-xO3（0.055x0.33）通过共沉淀法工艺合成获得.经X射线衍射分析表明，所得氧化物均为单相，属三方结构.在零场和外加磁场下的四极法电阻测试结果表明：所有样品都具有较大的磁电阻效应，当x<0.13时，样品的电阻率-温度曲线中均出现电阻率峰（电阻率出现从半导体性向金属性的转变），该电阻率峰处的温度（Tp）随x的增大而向低温区移动，磁电阻效应是负值;x＝0.23时，样品已呈半导体性，磁电阻效应仍是负值;然而x＝0.33时，样品虽也表现为半导体性，但其中的磁电阻效应出现奇特的正负交替转换.     

La-(Ca,Ba)-Mn-O材料磁电阻特性

用固相反应法制备了La2/3(CaxBa1-x)1/3MnO3(x=0.00, 0.40, 0.45, 0.55, 0.60, 1.00) 6种多晶CMR材料, 测量了材料在77～350 K范围内零磁场和0.4 T外磁场下的电阻率.在不同的温度区域呈现不同的电阻率以及磁电阻随温度的变化行为, 说明存在不同的磁电阻效应的机制.证实了高温下的电阻率峰为I-M转变.研究发现掺杂量x=0.55, 0.60两种材料在室温有较大的磁电阻, 表明掺杂量大小影响材料特性.     

IrO_2掺杂对La_(0.7)Ca_(0.2)Sr_(0.1)MnO_3室温磁电阻效应的增强

将IrO2掺杂到固相反应法制备的La0.7Ca0.2Sr0.1MnO3(LCSMO)微粉中,制备了(1-x)La0.7Ca0.2Sr0.1MnO3+xIrO2(LCSMO/IrO2)复合体系。通过X射线衍射(XRD)、振动样品磁强计(VSM)以及直流四探针法测试,对复合材料的结构及性能进行了研究。结果发现,在复合体系中,一部分Ir4+离子取代了B位的Mn4+离子,另一部分以IrO2氧化物的形式存在于颗粒的边界处。随着IrO2掺杂量的增加,样品的比饱和磁化强度(σs)快速下降,而居里温度(TC)先下降后上升,电阻率也发生显著变化。与此同时,IrO2的掺杂使样品的低场磁电阻效应(LFMR)和高场磁电阻效应(HFMR)都有所增强,在H=3 kOe,T=307 K,x=5%的样品磁电阻达到11.65%;同样对于x=5%的样品,在H=2 T,T=295 K,磁电阻达到28%,室温磁电阻得到显著增强,这可能与本征磁电阻效应的特点及材料的TC和相变温度接近室温有关,另外掺杂物本身的特性对磁电阻的增强也有一定的影响。     

金属间化合物Y(Fe_(1-x)Co_x)_(11.3)Nb_(0.7)的磁性能机制研究

通过X射线衍射和磁性测量方法研究了金属间化合物Y(Fe1 -xCox) 1 1 .3 Nb0 .7(x =0 ,0 0 5 ,0 10 ,0 2 0 )的结构与磁性能。粉末样品的X射线衍射和热磁曲线测量表明 ,所有Y(Fe1 -xCox) 1 1 .3Nb0 .7(x =0 ,0 0 5 ,0 10 ,0 2 0 )化合物具有ThMn1 2 型结构 ,具有良好的单相性。Co替代Fe引起居里温度显著提高和晶格常数的单调减小 ,室温下的饱和磁化强度Ms 随Co含量的增加在x =0 1～ 0 2之间呈现极大值 ,各向异性场Ba 随x的增加 ,先增加而后减小     

重掺杂Sm时La（0．6-x）SmxSr0．33MnO3的磁电性质

通过测量样品的磁化强度-温度（M-T）曲线、磁化强度-磁场强度（M-T）曲线、电阻率-温度（ρ-T）曲线及磁电阻（magnetoresistance）-温度（MR-T）曲线，研究了Sm重掺杂（x=0．40，0．50，0．60）对La（0．6-x）SmxSr0．33MnO3磁电性质的影响。发现随着Sm掺杂量增加，样品从长程铁磁有序向自旋团簇玻璃态和反铁磁状态转变；x=0．60时的输运性质在其磁背景下发生异常；掺杂引起的磁结构变化和额外磁性耦合将导致庞磁电阻效应。低温金属型导电的输运机制主要是电子．磁子相互作用，     

钙钛矿锰氧化物(La_(1-x)Gd_x)_(0.5)Sr_(0.5)MnO_3的磁电阻效应

采用传统的高温固相法制备了多晶样品(La1-xGdx)0.5Sr0.5MnO3(x=0,0.1,0.2,0.3,0.4),利用X射线衍射仪(XRD)、超导量子磁强计(SQUID)、标准四端引线法分别对样品结构、磁性、电性以及磁电阻效应进行了研究。研究表明:Gd的少量替代并没有引起结构变化;随着Gd含量的增加,所有样品的居里温度TC和金属-绝缘体转变温度Tp都降低了;在TC附近发现了磁电阻效应,同时在低温下发现了更大的磁电阻;并且Gd的少量替代可使磁电阻MR增大。     

(1-x)La_(0.67)Ca_(0.33)MnO_3/xCuO复合体系与La_(0.67)Ca_(0.33)Mn_(1-x)Cu_xO_3电输运行为比较

用不同实验方法制备了名义组分为(1-x)La_(0.67)Ca_(0.33)MnO_3/xCuO(LCMO/CuO)和La_(0.67)Ca_(0.33)Mn_(1-x)Cu_xO_3(LCMCO)两组样品,在宽的温度范围内研究了样品的电输运行为随Cu含量x的变化关系,发现这两组样品表现出不同的行为.对于LCMCO,随x的增加,金属-绝缘体转变温度T_p迅速降低,当x=5.5%,样品表现出绝缘体导电行为;而LCMO/CuO复合样品,当x≤6%时,随x增加,Tp逐渐下降,x≥6%时,T_p不再继续降低,所有样品几乎表现出相同的电输运行为.另外,这两组样品均表现出较好的低场磁电阻效应(LFMR),在0.3 T下样品的最大磁电阻分别达到了～76%和88%.基于样品结构以及制备过程的分析,我们认为LFMR效应的增强主要是因为颗粒边界上形成的Cu相关自旋无序层引起的.     

类钙钛矿化合物(La0.8-xCexSr0.2)0.97MnO3的电磁性能研究

探索性地研究了由内含不同程度CeO2的廉价原料--La2O3制备的, 名义成分为 （ La0.8-xCex Sr0.2）0.97MnO3 （x=0～0.26） 类钙钛矿锰氧化物的相结构、电磁性能, 及其作为固体氧化物燃料电池（SOFC）空气极材料的可能性. 实验显示, 样品中除了磁性的钙钛矿相外, 均出现了非磁性的Mn3O4相和不同程度的CeO2相;随着制备样品的原材料La2O3纯度的不同, 样品的电阻率、磁电阻比等电磁特性也随之发生明显的变化;样品在1 T磁场下的室温磁电阻比的范围可达-3%～-14%;对x=0, 0.037, 0.26的样品, 其电导率在600 K以上高温区均表现出较好的温度稳定性, 表明其作为SOFC空气极材料的可行性.     

稀土空位庞磁电阻材料La(1-x)2/3Ca1/3MnO3的结构变化和输运性质

利用标准的固相反应法制备了La（1-x）2/3Ca（1/3）MnO3（x〈0.1）系列具有稀土La空位的庞磁电阻锰氧化物多晶样品.X射线粉末衍射（XRD）测量分析表明所有的样品均为单相,单胞具有正交对称性（Pnma）.分析了不同浓度的La空位对磁电输运性质的影响： 随着空位浓度的增大,绝缘体-金属的转变温度（TMI）几乎不变（约为267 K）,这表明少量的稀土空位不会破坏双交换作用;但当La空位浓度x〉0.04时,零场电阻率增大,但磁电阻（MR）值减小;在x=0.04时MR值在转变温度TMI处达到最大值约为220%（8 T）.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.