导电自修复材料的研究进展

导电高分子材料因具备良好的导电性、质轻和易加工特性而被广泛应用于航空、生物医学设备、化学生物传感器和能源等领域。然而,导电高分子材料在使用过程中不可避免地会产生微裂纹,从而破坏导电通路并使整个电子设备瘫痪。受生物体启发,设计和构筑具备自修复功能的导电高分子材料是研究的热点。本文介绍了导电自修复材料的最新研究动态,综述了自修复机理和材料的制备方法及应用前景,最后简要分析导电自修复材料目前存在的主要问题并展望其发展方向。     

导电聚合物的纳米结构及其在生物医学领域的应用

由于表面效应、小尺寸效应和量子效应,使纳米结构的导电聚合物材料与传统聚合物材料相比,显示出更优越的性能。基于神经组织对电场和电刺激敏感性,使得导电聚合物纳米材料在生物医学应用方面很有前景。本文综述了纳米结构的导电聚合物的合成方法,及其在生物医学领域的应用。合成方法主要关注于硬模板法、软模板法和无模板自组装法,以及这些方法中导电聚合物纳米结构的形成机理。总结了具有纳米结构的导电聚合物,如纳米颗粒、纳米纤维和纳米管等作为神经电极涂层材料和生物传感器等方面的应用。     

高分子导电水凝胶的制备及在柔性可穿戴电子设备中的应用

水凝胶是具有高含水量、可变形性和良好生物相容性的材料,其中导电水凝胶具有良好的导电性、可调节的机械性及自黏附性等特征,逐渐成为制备柔性可穿戴电子设备的最佳候选材料。近年来,具有生物相容性、机械柔韧性和抗疲劳性的导电水凝胶得到广泛研究,能够实现多种生理信号和物理信号的监测及传输,促进了柔性可穿戴电子设备的发展。柔性可穿戴电子设备逐渐成为人机交互技术和人工智能领域的主要研究方向。导电水凝胶通过使用导电聚合物、导电填料、自由离子及其混合物来合成,根据导电机理,所制备的导电水凝胶可分为电子导电水凝胶、离子导电水凝胶和混合电子-离子导电水凝胶。本文讨论了导电水凝胶的制备方法,总结了导电水凝胶在可拉伸性、导电性、生物相容性和自修复性等功能方面的研究进展及其在柔性可穿戴电子设备中的应用,期望导电水凝胶可以取得更好的发展。     

自修复高分子材料近五年的研究进展

自修复材料的概念源于对生物体自愈合现象的仿生研究,该类材料在受到损伤时可进行自修复并恢复一定程度的力学等性能。对高分子材料而言,其受机械力损伤后一般发生大分子链均裂或异裂而使材料产生微裂纹,此类微裂纹很难探测,而微裂纹的产生往往会引起高分子材料失效,因此快速修复微裂纹对诸多工程领域的高分子材料来讲尤为重要。本文从外源型及本征型自修复高分子材料两个方面,综述了近五年自修复高分子材料的研究进展,并对其今后发展进行了展望。     

一维纳米纤维构筑的导电聚合物三维结构及其可控的浸润性

微/纳米结构的导电聚合物由于具有高导电性、易合成以及优异的环境稳定性从而在许多先进的研究领域备受关注,并有望在分子导线、化学和生物传感器、发光器件等领域获得广泛应用。 特别是,复杂的三维自组装结构在获得高性能和功能化的材料方面提供了巨大的潜在应用价值。本文主要介绍了我们利用胶束的软模板和自组装驱动力的协同效应,实现由一维纳米结构组装的三维微米结构导电聚合物方面的研究进展。该制备技巧在于低表面自由能的含氟有机酸具有软模板、掺杂剂、自组装驱动力,以及诱导超疏水性的多重作用实现导电聚合物三维结构的组装和多功能化。介绍了利用环境湿度调整分子的自组装驱动力,实现导电聚合物由一维纳米结构向三维微米结构的组装。此外,还介绍了利用导电聚合物可逆的化学掺杂/脱掺杂机制,实现导电聚合物表面浸润性的可逆转化。最后介绍了在液/液/固三相体系中,通过外加电场刺激,可实现油滴在导电聚合物表面的浸润性和黏附力的控制。     

纳米碳材料在可穿戴柔性导电材料中的应用研究进展

可穿戴设备的兴起使得对柔性器件的需求日益提高,柔性导电材料作为可穿戴器件的重要组成部分而成为研究的热点。传统的电极材料主要是金属,因金属材料本身不具有柔性,一般通过降低金属层厚度以及设计波纹结构等策略实现其在柔性器件中的应用,其加工程序复杂,成本较高。以碳纳米管和石墨烯为代表的纳米碳材料兼具良好的柔性和优异的导电性,且具有化学稳定、热稳定、光学透明性等优点,在柔性导电材料领域展现了极大的应用潜力。本文简要综述了近年来纳米碳材料在柔性导电材料领域的研究进展,首先介绍了碳纳米管基柔性导电材料,分别包括基于碳纳米管水平阵列、碳纳米管垂直阵列、碳纳米管薄膜、碳纳米管纤维的柔性导电材料;继而介绍了石墨烯基柔性导电材料,包括基于剥离法制备的石墨烯和化学气相沉积法制备的石墨烯以及石墨烯纤维基柔性导电材料;并简述了碳纳米管/石墨烯复合柔性导电材料;最后论述了纳米碳材料基柔性导电材料所面临的挑战并展望了其未来发展方向。     

PTh / ZnO复合纳米粉的固相合成及其光谱特性

0引言导电聚合物/无机物纳米复合材料具有纳米材料和导电聚合物的共同特性,因此在电催化、二次充电电池材料、超级电容器材料等方面具有良好的应用前景[1]。聚噻吩(PTh)以及取代聚噻吩是导电聚合物领域中较早发现的具有环境稳定性和可加工性的材料之一。近年来,有关聚噻吩/无机物纳米复合材料的制备及其光电性能的研究倍受关注,Gebeyehu等[2]用PTh敏化纳米晶TiO2光伏电池,发现其光伏效率明显优于固态光伏电池;Jayant等[3]研究了PTh中的羧基基团的影响以及在纳米晶TiO2     

导电聚合物的电化学制备及其应用研究进展

导电聚合物由于具有结构特殊、环境稳定性好、成本低廉等优点而成为科学领域中极具应用前景的新型材料。本文综述了采用电化学聚合方法制备导电聚合物材料的国内外研究状况。电化学聚合方法是此类材料重要的制备方法之一。基于该方法的最新研究进展,本文系统地归纳了导电聚合物的恒电位法、恒电流法、动电位法、脉冲法等电化学聚合方法,并展望了导电聚合物纳米材料在超级电容器、太阳能电池、锂离子电池、电催化等领域的应用前景。     

导电二维配位聚合物框架材料在能源存储及转化领域的应用

配位聚合物框架材料具有高的比表面积、丰富的孔结构和金属配位中心,一直以来被视为能源领域的潜在电极材料。传统配位聚合物框架材料电导率低,因此,如何设计并合成具有一定导电性的配位聚合物框架材料,满足能源及其相关领域对于材料电学性质的要求,成为配位聚合物框架材料领域的研究热点方向之一。本综述介绍了近年来导电二维配位聚合物框架材料的设计思路及电导率测量方法,并对这类材料的制备及其在能源转化及存储方面的应用进行了总结。最后,对二维高导电配位聚合物今后的研究和发展方向进行了展望。     

通过微观形态控制降低导电高分子复合材料逾渗值的研究进展

降低复合型导电高分子材料的逾渗值是实现材料低成本化和高性能化的关键.这方面的研究一直以来都受到学术界和产业界的广泛关注.本文介绍了近年来通过微观形态控制手段降低导电高分子复合材料逾渗值的研究状况.文章将现有的形态控制方法归纳为双逾渗方法、隔离分布方法、原位微纤方法、自组装方法等七大类,并从微观形态实现机理、形态与电性能关系、应用前景等方面对这些方法进行了讨论.此外,本文还对该研究领域未来发展趋势作了展望.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Microwave-assisted copper-catalyzed stereoselective ring expansion of three-membered heterocycles with α-diazo-β-dicarbonyl compounds

Microwave-assisted copper-catalyzed ring expansions of three-membered heterocycles with α-diazo-β-dicarbonyl compounds were investigated. Thiiranes generated 3-acyl-5,6-dihydro-1,4-oxathiines in the presence of copper sulfate and trans-3-acyl-5,6-dihydro-1,4-oxathiines as stereospecific products for 1,2-disubstituted cis-thiiranes through an intramolecular S_N2 process. Oxiranes gave rise to 2-acyl-5,6-dihydro-1,4-dioxines under the catalysis of copper hexafluoroacetylacetonate and cis-3-acyl-5,6-dihydro-1,4-dioxines as stereospecific products for 1,2-disubstituted cis-oxiranes via an intimate ion-pair mechanism. The current method provides a direct and simple strategy in efficient preparation of 3-acyl-5,6-dihydro-1,4-oxathiines and 2-acyl-5,6-dihydro-1,4-dioxines, important agents in medicinal and agricultural chemistry, from readily available thiiranes and oxiranes, respectively.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.