用于蓝光(405nm)激光直写的聚乙烯醇/银纳米复合材料薄膜的制备

利用紫外光诱导还原金属前躯体硝酸银(AgNO3),直接在聚乙烯醇(PVA)薄膜中生长银纳米颗粒,成功制备出PVA/Ag纳米复合材料薄膜。利用紫外-可见吸收光谱分析了银离子浓度、紫外光辐照功率和辐照时间对薄膜光谱的影响趋势。通过优化硝酸银浓度、辐照条件来调节薄膜中银纳米颗粒的尺寸和空间分布密度,成功地将此复合薄膜的等离子共振吸收峰位调节为406nm,并用于蓝光(405nm)激光直写光刻。扫描电子显微镜(SEM)观察表明,该材料中纳米颗粒分布均匀,粒径分布较窄;X射线光电子谱(XPS)证实了合成的纳米颗粒为单质银;原子力显微镜(AFM)分析显示薄膜光刻后获得了表面清晰、光滑、规整的图形。     

Microstructure and roughness improvement of polycrystalline Bi thin films upon pulsed-laser melting

Bismuth films with different thicknesses have been grown by do sputtering on substrates held at room temperature. The films are always formed by columnar crystals with a grain size comparable to the film thickness which lead to surface roughness. It increases with the thickness of the films and has a strong influence on the film optical properties. The films have been irradiated with nanosecond laser pulses, and real-time reflectivity measurements during the irradiation were used to follow the changes in the film optical properties. It will be shown that pulsed-laser irradiation of films thinner than 100 nm improves substantially their surface roughness and their crystalline quality by increasing the grain size at least one order of magnitude.     

Ultraviolet irradiation induced changes in the surface of phenolphthalein poly(ether sulfone) film

Changes in surface characteristics of phenolphthalein poly(ether sulfone) (PES-C) film induced by ultraviolet (UV) irradiation were investigated. The surface properties of the pristine and irradiated films were studied by attenuated total-reflection FTIR (FTIR-ATR), X-ray photoelectron spectroscopy (XPS), contact angle measurements and atomic force microscopy (AFM). It was found that photooxidation degradation took place on the sample surface after irradiation and the oxygen content in the surface increased as evidenced by FTIR-ATR and XPS results. The water contact angle of the irradiated films decreased with increasing irradiation time, which was ascribed to the increased polarity of the surface induced by photooxidation. The etching of ultraviolet irradiation induced the roughening of PES-C surface after irradiation with its root-mean-square roughness (RMS) determined by AFM increased from 2.097 nm before irradiation to 7.403 nm in the area of 25 μm × 25 μm.     

Formation of gold nanoparticles in heat-treated reactive co-sputtered Au-SiO2 thin films

In this work, formation of gold nanoparticles in radio frequency (RF) reactive magnetron co-sputtered Au-SiO₂ thin films post annealed at different temperatures in Ar + H₂ atmosphere has been investigated. Optical, surface topography, chemical state and crystalline properties of the prepared films were analyzed by using UV-visible spectrophotometry, atomic force microscopy (AFM), X-ray photoelectron spectroscopy (XPS) and X-ray diffractometry (XRD) techniques, respectively. Optical absorption spectrum of the Au-SiO₂ thin films annealed at 800 °C showed one surface plasmon resonance (SPR) absorption peak located at 520 nm relating to gold nanoparticles. According to XPS analysis, it was found that the gold nanoparticles had a tendency to accumulate on surface of the heat-treated films in the metallic state. AFM images showed that the nanoparticles were uniformly distributed on the film surface with grain size of about 30 nm. Using XRD analysis average crystalline size of the Au particles was estimated to about 20 nm.     

Influence of surface properties on the structure of granular silver films and excitation of localized plasmons

Granular silver films deposited on a thin insulating film of amorphous hydrogenated carbon (a-C:H) and transparent conducting electrode (polycrystalline indium tin oxide (ITO) layer) have been investigated by spectroscopy and microscopy methods. The extinction spectra of silver films on the surface of these materials are found to be significantly different. An annealing of silver films causes a blue shift of the peak of plasmon resonance band in the spectrum of silver nanoparticles: by 16 nm on the a-C:H surface and by 94 nm on the ITO surface. Silver films on the surface of a-C:H films are characterized by a narrower band in the extinction spectrum, which is peaked at 446 nm. The changes observed in the optical density of Ag films are related to the change in size and area of nanoparticles. The results of spectral studies of Ag films are in agreement with the data on the nanostructure obtained by scanning electron microscopy and statistical image processing. The spectra of granular silver films are shown to correlate well with the nanoparticle distribution function over the film area.     

Durability of Ultra-Thin Silver Films and Silver-Gold Alloy Films under UV Irradiation

Silver films(Ag) and silver-gold films(Ag-Au) with thickness ~15nm are coated on Bk7 glasses through thermal evaporation.After doping gold of 5.2%,the grain size of the Ag film reduces from 13.6nm to 9.1nm,also the surface roughness decreases from 1.45 nm to 0.94 nm.A UV lamp is used as the irradiation light source to accelerate the corrosion process in the atmosphere.After 17 h irradiation,the pure silver film surface turns dark,and the transmittances reduce from 350 nm to 500 nm,while the Ag-Au film degrades much less,almost negligibly after UV radiation.Additional x-ray photoelectron spectroscopy and atomic force micrographs data are provided to show atomic content of Sims and their surface morphologies.It is suggested that small grain size and high packing density of alloy film prevent reaction of silver with oxygen in the atmosphere,which leads to high stability of the Ag-Au Elm.     

SERS characterization of metallic silver nanoparticle self‐assembly within thin films

Clusters of silver nanoparticles are generated by the thermally initiated reduction of silver carboxylates (long‐chain fatty acids) in the thin polymer films. The size, shape, and aggregation of these nanoparticles are affected by the reduction reaction in the presence of capping agents. In order to understand the mechanism(s) controlling the silver structure formation, it is essential to understand the surface coordination chemistry occurring during this process. We now report the first application of surface‐enhanced Raman spectroscopy (SERS) to directly characterize adsorbates on the surfaces of silver nanoparticles within a thin film imaging construction containing multiple components. In addition, SERS investigation of model silver substrates was used to confirm the identify of specific adsorbates of silver complexes. This is a powerful tool for revealing the chemistry involved with the control of silver nanoparticle aggregation during thermally induced metallic silver formation within thin films. Both the catechol‐reducing agent and the phthalazinone (PAZ) particle aggregation agent are observed on the metallic silver surface at the initial particle formation and during its crystal growth. However, careful attention to excitation wavelength is required in order to observe all the surface species. PAZ appears to be more effective at stabilizing individual silver particles than other aggregation agents investigated. An understanding of the roles of the aggregation/reducing agents in the growth and aggregation of silver nanoparticles is important for preparing different types of silver particles for specific applications including silver‐based thermal imaging systems. Copyright © 2008 John Wiley & Sons, Ltd.     

Effect of implantation regimes of silver ions on the structure and optical properties of zinc-oxide nanocrystalline films

Thin (about 270 nm) nanocrystalline films of zinc oxide (ZnO) are obtained on quartz substrates using ion sputtering and irradiated with Ag⁺ ions at an energy of 30 keV and relatively high fluences at ion current densities of 4, 8, and 12 µA/cm². The X-ray analysis, scanning electron microscopy, and optical spectroscopy are used to study the effect of irradiation dose and ion current density on the structural modification and optical properties of the ZnO films. Nontrivial dependences of the structural and optical parameters of the films on the ion irradiation regimes are due to radiation heating and film sputtering under the action of the ion beam, diffusion of impurity, formation of silver nanoparticles in the irradiated layer at high implantation fluences, and the diffusion of implanted impurity at relatively high ion current densities.     

Spatially controlled dissolution of Ag nanoparticles in irradiated SiO2 sol-gel film

In this paper, we report the spatially controlled dissolution of silver nanoparticles in irradiated SiO₂ sol-gel films. The Ag nanoparticles have been formed in the sol-gel solution before the film deposition by adding Triton and ascorbic acid and also after the film deposition using a heat treatment at 700 °C for few minutes or at 550 °C for 6 h in reducing atmosphere. Using a spectrometer, a new view white light interferometer and a micro-thermal analyzer, we demonstrate that the silver nanoparticles can be dissolved using a continuous black ray UV lamp or with a near-infrared (NIR) femtosecond laser, due to a significantly increase in the local temperature. We confirm that the micro-thermal analyzer can be used as a new tool to study the dissolution of metallic nanoparticles in thin film if located at the surface of the films.     

Ageing of plasma-mediated coatings with embedded silver nanoparticles on stainless steel: An XPS and ToF-SIMS investigation

Nanocomposite thin films (∼170 nm), composed of silver nanoparticles enclosed in an organosilicon matrix, were deposited onto stainless steel, with the aim of preventing biofilm formation. The film deposition was carried out under cold plasma conditions, combining radiofrequency (RF) glow discharge fed with argon and hexamethyldisiloxane and simultaneous silver sputtering. XPS and ToF-SIMS were used to characterize Ag-organosilicon films in native form and after ageing in saline solution (NaCl 0.15 M), in order to further correlate their lifetime with their anti-fouling properties. Two coatings with significantly different silver contents (7.5% and 20.3%) were tested. Surface analysis confirmed the presence of metallic silver in the pristine coating and revealed significant modifications after immersion in the saline solution. Two different ageing mechanisms were observed, depending on the initial silver concentration in the film. For the sample exhibiting the low silver content (7.5%), the metal amount decreased at the surface in contact with the solution, due to the release of silver from the coating. As a result, after a 2-day exposure, silver nanoparticles located at the extreme surface were entirely released, whereas silver is still present in the inner part of the film. The coating thickness was not modified during ageing. In contrast, for the high silver content film (20.3%), the thickness decreased with immersion time, due to significant silver release and matrix erosion, assigned to a percolation-like effect. However, after 18 days of immersion, the delamination process stopped and a thin strongly bounded layer remained on the stainless steel surface.     

Spontaneous Agglomeration of Silver Nanoparticles Deposited on Carbon Film Surface

The spontaneous aggregation of silver nanoparticles on a two-dimensional surface at room temperature is investigated. The nanoparticles were deposited on a carbon film and have been observed by a transmission electron microscope (TEM) for over one year. These particles were about 10nm, spherical and well dispersed initially, and an obviously spontaneous agglomeration was observed at the 12th day, the values, coverage rate of the silver particles on carbon film, were increased with time (before 40th day), but reduced with time (after 40th day). These show that the aggregates of the particles tend to have the smallest surface to reduce their surface free energy and are compact three-dimensional cluster in which the most size is above 100nm. Agglomerating is a successively slow diffusion-limited aggregation (DLA) growth. Another phenomenon, a big aggregate gathering some particles and a small aggregate to form a still bigger one, is observed. This indicates that the aggregating processes are controlled by migration of the particles on carbon film surface and surface energy of the particles.     

激光辐照对热退火金属/掺氟二氧化锡透明导电薄膜光电性能的影响

采用532 nm纳秒脉冲激光对热退火的铝(Al)/掺氟二氧化锡(FTO)、铜(Cu)/FTO和银(Ag)/FTO三种双层复合薄膜表面分别进行处理, 结果显示薄膜样品的光电性能都得到提高.其中, 热退火Ag/FTO薄膜的平均透光率(400–800 nm)增幅最大, 从72.6%提高到80.5%, 主要是由于其表面产生了具有减反增透作用的光栅结构.激光辐照后热退火Ag/FTO薄膜的导电性也略有提高, 其方块电阻从5.6 Ω/sq下降到5.3 Ω/sq, 原因主要是激光辐照的热效应造成的退火作用使薄膜的晶粒尺寸增大, 减少了晶界散射而使载流子迁移率提高.计算结果显示, 激光辐照后热退火Ag/FTO薄膜的品质因子从0.73×10^-2Ω^-1增大为2.16×10^-2Ω^-1, 表明其综合光电性能得到显著提高.激光辐照可同步实现薄膜表面光栅结构的制备和附加退火作用, 这为金属层复合透明导电薄膜光电性能的综合优化提供了新的思路.     

紫外光下纳米TiO2薄膜亲水性机理的电化学研究

利用溶胶 凝胶方法在透明导电玻璃ITO (SnO2 ∶In)表面制备纳米TiO2 薄膜 ,XRD谱图表明TiO2 是锐钛矿晶型 ,AFM (Atomic Force Microscope)测得薄膜表面粒子约为 10 0nm .研究了ITO表面纳米TiO2 薄膜的光致亲水性变化 .通过循环伏安技术测定TiO2 薄膜电极在 2 5 3.7nm的紫外光照射后的电化学行为推测光致亲水性机理 .发现在紫外光照射一定时间后 ,TiO2 薄膜电极的循环伏安图在 +0 .0 35V处出现新的氧化峰 ;且随光照时间的增加 ,氧化峰的峰电流增大 ,溶液中的溶解氧对峰电流的大小有明显影响 .实验表明 ,在紫外光照下电极表面有Ti3 + 产生 ,证实了TiO2 薄膜的光致亲水性转变过程与Ti3 + 的生成导致的表面结构变化有关     

TEM monitoring of silver nanoparticles formation on the surface of lead crystal glass

Silver nanoparticles have been formed on the surface of lead crystal glass by means of (i) ion-exchange of alkaline ions from the glass by Ag⁺ ions from a molten salts bath, and (ii) silica based sol-gel coatings containing silver. All experimental variables concerning both ion-exchange process and sol-gel coatings application were combined and studied as main parameters governing the reduction of Ag⁺ ions to Ag⁰ atoms and further aggregation to form nanosized colloids. The content of thermoreducing agents (arsenic or antimony oxides) in the lead crystal glass was essential to favour the reduction of silver ions to form nanoparticles. Optimal experimental conditions to be used for the obtaining of surface silver nanoparticles were determined. TEM was used as the principal characterisation technique for direct observation of the nanoparticles generated. The size of silver colloids varied in the 20-300 nm range for ion-exchanged samples and in the 10-80 nm range for sol-gel coated samples.     

Fluorescent silver nanoparticles via exploding wire technique

Aqueous solution containing spherical silver nanoparticles of 20–80 nm size have been generated using a newly developed novel electro-exploding wire (EEW) technique where thin silver wires have been exploded in double distilled water. Structural properties of the resulted nanoparticles have been studied by means of X-ray diffractometer (XRD) and transmission electron microscopy (TEM). The absorption spectrum of the aqueous solution of silver nanoparticles showed the appearance of a broad surface plasmon resonance (SPR) peak centered at a wavelength of 390 nm. The theoretically generated SPR peak seems to be in good agreement with the experimental one. Strong green fluorescence emission was observed from the water-suspended silver nanoparticles excited with light of wavelengths 340, 360 and 390 nm. The fluorescence of silver nanoparticles could be due to the excitation of the surface plasmon coherent electronic motion with the small size effect and the surface effect considerations     

Low temperature thermoelectric properties of Cu intercalated TiSe2: a charge density wave material

Y₂O₃ nanoparticles and nanorods have been firstly synthesized in bulk Ti-Y films prepared by magnetron sputtering on Si (100) substrates at different temperatures. X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), and energy dispersive X-ray spectroscopy (EDS) are used to characterize the structure, morphology, and composition of the as-synthesized nanoparticles and nanorods. The mechanical properties of the sputtered films are investigated using nanoindentation techniques. The results indicate that both the nanoparticles and nanorods have a pure cubic Y₂O₃ structure resulting from the reaction of Y atoms with the residual O₂ in the vacuum chamber, and are free from defects and dislocations with uniform diameters of about 30 nm. The Y₂O₃ nanoparticles mainly distribute at the grain boundaries of the Ti matrix and the nanorods have lengths ranging from 250 nm to more than 1 μm with the growth direction parallel to the (002) plane. As the growth temperature elevates, the nanoparticles turn to be coarsening while more and longer nanorods are inclined to form. Compared with the Ti film, the TiY films have a remarkable increase in hardness, but do not exhibit expected increase in elastic modulus. Finally, the growth mechanism is also briefly discussed.     

新型C60衍生物／Ag复合纳米材料的制备及光谱性质

利用1,3-偶极环加成反应合成了联吡啶基C60单加成衍生物N-甲基-2-[4′-(4″-甲基-2′,2″-联吡啶基)]-3,4-C60吡咯烷(C60BPY),并用NaBH4还原法和银溶胶直接组装法制备了C60BPY/Ag复合纳米结构。透射电子显微镜(TEM)表明,两种复合纳米结构的粒子粒径分别在30~45nm和40~55nm之间,粒子形状较规则,且分散性较好。在复合纳米结构形成过程中,C60BPY分子有效地控制了银粒子的生长和团聚,起到了很好的稳定和分散作用。紫外-可见吸收光谱中,两种复合纳米结构分别在430和490nm处出现了银纳米粒子的表面等离子体共振吸收峰,说明随着粒径的增大,吸收峰发生了红移。荧光发射光谱显示,C60BPY/Ag复合纳米体系猝灭了C60BPY在720和805nm处的发射峰,并对其机理进行了探讨。这种复合纳米体系有望在光电器件、传感器及催化领域有潜在的应用前景。     

Evolution of surface morphology of NiO thin films under swift heavy ion irradiation

NiO nanoparticle thin films grown on Si substrates were irradiated by 107 MeV Ag⁸⁺ ions. The films were characterized by glancing angle X-ray diffraction and atomic force microscopy. Ag ion irradiation was found to influence the shape and size of the nanoparticles. The pristine NiO film consisted of uniform size (∼100 nm along major axis and ∼55 nm along minor axis) elliptical particles, which changed to also of uniform size (∼63 nm) circular shape particles on irradiation at a fluence of 3 × 10¹³ ions cm⁻². Comparison of XRD line width analysis and AFM data revealed that the particles in the pristine films are single crystalline, which turn to polycrystalline on irradiation with 107 MeV Ag ions.     

A sunlight-induced method for rapid biosynthesis of silver nanoparticles using an <Emphasis Type="Italic">Andrachnea chordifolia</Emphasis> ethanol extract

In this study a sunlight-induced method for rapid synthesis of silver nanoparticles using an ethanol extract of Andrachnea chordifolia is described. The silver nitrate solutions (1 mM) containing the ethanol extract of Andrachnea chordifolia were irradiated by both sunlight radiation and by sunlight radiation passed through different colored filters (red, yellow or green). The smallest size of silver nanoparticles was obtained when a silver ion solution was irradiated for 5 minutes by direct sunlight radiation. Further examination of the shape and size and of the surface chemistry of these biogenic silver nanoparticles, which were prepared under sunlight radiation, was carried out using transmission electron microscopy and infrared spectroscopy, respectively. Transmission electron microscopy images show spherical particles with an average size of 3.4 nm. Hydroxyl residues were also detected on the surface of these biogenic silver nanoparticles fabricated using plant extract of Andrachnea chordifolia under sunlight radiation. Our study on the reduction of silver ions by this plant extract in darkness shows that the synthesis process can take place under dark conditions at much longer incubations (48 hours). Larger silver polydispersed nanoparticles ranging in size from 3 to 30 nm were obtained when the silver ions were treated with the ethanol extract of Andrachnea chordifolia under dark conditions for 48 hours.     

Effect of complexing agent on the properties of electrochemically deposited Cu2ZnSnS4 (CZTS) thin films

The Cu₂ZnSnS₄ (CZTS) thin films have been electrochemically deposited on Mo-coated glass substrate from weak acidic medium (pH 4.5-5) at room temperature. The effect of complexing agent (tri-sodium citrate) on the structural, morphological and compositional properties of CZTS thin films has been investigated. The as-deposited and annealed thin films were characterized by X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM),EDAX and X-ray photoelectron spectroscopy (XPS) techniques for their structural, morphological, compositional and chemical properties, respectively. XRD studies reveal that the amorphous nature of as-deposited thin film changes into polycrystalline with kesterite crystal structure after annealing in Ar atmosphere. The film prepared without complexing agent showed well-covered surface morphology on the substrate with some cracks on the surface of the film whereas those prepared using complexing agent, exhibited uneven and slightly porous and some overgrown particles on the surface of the films. After annealing, morphology changes into the flat grains, uniformly distributed over the entire surface of the substrate. The EDAX and XPS study reveals that the films deposited using 0.2 M tri-sodium citrate are nearly stoichiometric.