A hybrid scaffold of poly(lactide-<Emphasis Type="Italic">co</Emphasis>-glycolide) sponge filled with fibrin gel for cartilage tissue engineering

The poly(lactide-co-glycolide)(PLGA) sponge fabricated by a gelatin porogen leaching method was filled with fibrin gel to obtain a hybrid scaffold for chondrocytes culture in vitro.The fibrin gel evenly distributed in the hybrid scaffold with visible fibrinogen fibers after drying.In vitro culture it was found that in the hybrid scaffold the chondrocytes distributed more evenly and kept a round morphology as that in the normal cartilage.Although the chondrocytes seeded in the control PLGA sponges showed similar proliferation behavior with that in the hybrid scaffolds,they were remarkably elongated,forming a fibroblast-like morphology.Moreover,a larger amount of glycosaminoglycans was secreted in the hybrid scaffolds than that in the PLGA sponges after in vitro culture of chondrocytes for 4 weeks.The results suggest that the fibrin/PLGA hybrid scaffold may be favorably applied for cartilage tissue engineering.     

Preparation,Characterization, and In Vitro Biological Evaluation of PLGA/Nano-Fluorohydroxyapatite (FHA) Microsphere-Sintered Scaffolds for Biomedical Applications

In this research, the novel three-dimensional (3D) porous scaffolds made of poly(lactic-co-glycolic acid) (PLGA)/nano-fluorohydroxyapatite (FHA) composite microspheres was prepared and characterize for potential bone repair applications. We employed a microsphere sintering method to produce 3D PLGA/nano-FHA scaffolds composite microspheres. The mechanical properties, pore size, and porosity of the composite scaffolds were controlled by varying parameters, such as sintering temperature, sintering time, and PLGA/nano-FHA ratio. The experimental results showed that the PLGA/nano-FHA (4:1) scaffold sintered at 90 °C for 2 h demonstrated the highest mechanical properties and an appropriate pore structure for bone tissue engineering applications. Furthermore, MTT assay and alkaline phosphatase activity (ALP activity) results ascertained that a general trend of increasing in cell viability was seen for PLGA/nano-FHA (4:1) scaffold sintered at 90 °C for 2 h by time with compared to control group. Eventually, obtained experimental results demonstrated PLGA/nano-FHA microsphere-sintered scaffold deserve attention utilizing for bone tissue engineering.     

与胶原特异性结合的BMP2模拟肽/PLGA 3D打印复合支架的制备及成骨诱导活性

将胶原绑定结构域(CBD)多肽序列与骨形态发生蛋白2模拟肽(BMP2-MP)序列连接制备具有胶原绑定能力的CBD-BMP2-MP, 再将CBD-BMP2-MP与聚丙交酯-乙交酯/胶原(PLGA/COL)3D打印支架相结合, 以支架表面的胶原成分为媒介, 将CBD-BMP2-MP更有效地固定于骨修复材料上, 达到对其进行改性的目的. 利用扫描电子显微镜(SEM)、 电子万能试验机和接触角测量仪对复合支架表面形貌、 力学强度和亲水性等材料学性能进行评价. 用荧光成像法评测 CBD-BMP2-MP及BMP2-MP与支架材料的结合能力. 在各组支架材料表面接种MC3T3-E1细胞进行体外培养, 采用CCK-8、 鬼笔环肽荧光染色、 茜素红染色及qPCR综合评价细胞在材料表面的黏附、 增殖和成骨分化等细胞行为, 研究CBD-BMP2-MP修饰的3D多孔PLGA/COL复合支架的生物学性能. 研究结果表明, 利用3D打印技术制备的多孔支架具有形貌可控的孔隙结构, 为细胞生长创造更有利的细胞微环境, 支架表面胶原成分的加入提高了支架材料的亲水性, 同时对支架材料本身的力学性能无任何影响, 提高了复合支架本身的生物相容性. 与普通BMP2-MP相比, CBD-BMP2-MP具有更好的胶原绑定能力, 与复合支架的结合更稳定, 提高了PLGA/COL复合支架对BMP2-MP的负载能力. 支架表面负载CBD-BMP2-MP后具有极强的促细胞成骨分化能力. MC3T3-E1细胞表现出更高的钙沉积能力, 并且成骨分化相关基因Runx2, ALP, COL-I及OPN等水平也有了明显提升. 表明CBD-BMP2-MP多孔复合支架具有良好的生物相容性和成骨诱导活性, 在骨组织修复领域具有良好的应用前景.     

Optimization of fibrin gelation for enhanced cell seeding and proliferation in regenerative medicine applications

In order to improve the cell seeding efficiency and cell compatibility inside porous tissue scaffolds, a method of fibrin gel‐mediated cell encapsulation inside the scaffold was optimized. Disc‐type poly(d ,l ‐glycolic‐co‐lactic acid) (PLGA) scaffolds without a dense surface skin layer were fabricated using an established solvent casting and particulate leaching method as a model porous scaffold, which showed high porosity ranging from 90 ± 2% to 96 ± 2%. The thrombin and fibrinogen concentration as precursors of fibrin gel was varied to control the gelation kinetics as measured by rheology analysis, and optimized conditions were developed for a uniform fibrin gel formation with the target cells inside the porous PLGA scaffold. The fibroblast cell seeding accompanied by a uniform fibrin gel formation at an optimized gelation condition inside the PLGA scaffold resulted in an increase in cell seeding efficiency, a better cell proliferation, and an increase in final cell density inside the scaffold. Scanning electron microscopy images revealed that cells were better spread and grown by fibrin gel encapsulation inside scaffold compared with the case of bare PLGA scaffold. Copyright © 2016 John Wiley & Sons, Ltd.     

Effect of surface-modified collagen on the adhesion, biocompatibility and differentiation of bone marrow stromal cells in poly(lactide-co-glycolide)/chitosan scaffolds

The material-driven differentiation of bone marrow stromal cells (BMSCs) is a critical issue in regeneration medicine. In this study, we showed the differentiation of BMSCs in 3-D scaffolds consisting of collagen, poly(lactide-co-glycolide) (PLGA) and chitosan. The results revealed that the collagen-grafted PLGA/chitosan scaffolds yielded little cytotoxicity to BMSCs. The scaffold containing type I collagen of 640μg/mL was about 1.2 times the cell adhesion efficiency of the corresponding unmodified scaffold. In addition, the modification of type I collagen with the density of 640μg/mL increased about 1.3 times the cell viability and 1.2 times the biodegradation, respectively. The differentiation of BMSCs in PLGA/chitosan scaffolds produced osteoblasts with mineral deposition on the substrate. Moreover, the surface collagen promoted the formation of mineralized tissue and reduced the amount of phenotypic BMSCs in the constructs. However, the induction with neuron growth factor (NGF) inhibited osteogenesis and guided the differentiation of BMSCs towards neurons in the constructs. Therefore, the combination of collagen-functionalized PLGA/chitosan scaffolds, NGF and BMSCs can be promising in neural tissue engineering.     

Functional PLGA Scaffolds for Chondrogenesis of Bone‐Marrow‐Derived Mesenchymal Stem Cells

Two chondrogenic factors, Dex and TGF‐β1, were incorporated into PLGA scaffolds and their chondrogenic potential was evaluated. The Dex‐loaded PLGA scaffold was grafted with AA and heparin, the heparin‐immobilized one was then reacted with TGF‐β1, yielding a PLGA/Dex‐TGF (PLGA/D/T) scaffold. The scaffolds were seeded with rabbit MSCs and cultured for 4 weeks. The results show that the scaffolds including chondrogenic factors strongly upregulated the expression of cartilage‐specific genes and clearly displayed type‐II collagen immunofluorescence. The functionalized PLGA scaffolds could provide an appropriate niche for chondrogenic differentiation of MSC without a constant medium supply of Dex and TGF‐β1.

     

聚酯多孔支架降解液对骨髓基质干细胞活力和成骨分化的影响

通过室温模压/粒子浸出方法制备得到聚乙交酯丙交酯(PLGA)多孔支架,每个质量50 mg、孔径200～300μm、孔隙率略大于90%的PLGA85/15多孔支架在10 mL磷酸盐缓冲液(PBS)中37℃体外降解24周.降解液每周换一次,不同时间点的降解液被收集、并加入骨髓基质干细胞(MSC)的培养液或者成骨诱导液中,利用胞外乳酸脱氢酶含量检测、细胞死活染色、四唑盐检测、碱性磷酸酶染色和定量检测的方法考察降解液对MSC的活力和成骨分化能力的影响.实验结果表明,PLGA多孔支架材料在PBS中逐渐降解,其质量、尺寸、孔径、孔与孔的连通性、分子量有不同程度的降低;其降解液在本研究的实验条件下未发现对MSC有明显的细胞毒性,对MSC的活力、增殖以及成骨分化均无显著的负面影响.     

Temperature Responsive Shape‐Memory Scaffolds with Circumferentially Aligned Nanofibers for Guiding Smooth Muscle Cell Behavior

Structural simulation of the smooth muscle layer plays an important role in tissue engineering of blood vessels for the replacement of damaged arteries. However, it is difficult to construct small‐diameter tubular scaffolds to homogenously locate and align smooth muscle cells (SMCs). In this work, novel temperature responsive shape‐memory scaffolds are designed for SMC culturing. The scaffolds are composed of an outer layer of poly(lactide–glycolide–trimethylene carbonate) (PLGATMC) for programming the deformation from planar to small‐diameter tubular shape and an inner layer of aligned nanofibrous membrane of poly(lactide–glycolide)/chitosan (PLGA/CS) to regulate cell adhesion, proliferation, and morphology. The SMC behaviors and functions are dependent on the PLGA/CS ratios of membranes, and the scaffold with PLGA/CS 7:3 membrane exhibits the most suitable ability to regulate SMC behavior. The PLGA/CS@PLGATMC scaffold can be deformed into a temporary planar at 20 °C for convenient seeding and attachment of SMCs and then immediately self‐rolled into 3D tube at 37 °C. The proposed strategy offers a practical approach for the development of small‐diameter vascular scaffolds from 2D planar into 3D tubular shape by self‐rolling.     

Poly(l,l-lactide-co-glycolide)/tricalcium phosphate composite scaffold and its various changes during degradation in vitro

A poly(l,l-lactide-co-glycolide) (70/30)/(tricalcium phosphate) (PLGA/TCP) composite scaffold was fabricated by low-temperature deposition (LDM) and its degradation performed in vitro for 22 weeks. Various changes during degradation in vitro, which included changes in acidity of the degradation medium, morphology, weight, composition, molecular weight of the PLGA component and mechanical properties of the scaffold, were investigated. It was found that the acidity of degradation medium of the PLGA(70/30)/TCP composite scaffolds reduced and became much lower than that of TCP-free scaffold. With degradation, the volume and porosity of the PLGA(70/30)/TCP composite scaffold reduced at first then increased slowly, while the surface morphology of the scaffold changed from smooth to rough. The weight loss of the scaffold increased by dissolution of the degraded products and TCP component, but mainly by dissolution of the glycyl-rich degraded products of the PLGA component. The molecular weight of the PLGA component reduced with time, but the molecular weight distribution increased at first and then reduced. The compressive strength and modulus of the scaffold increased at first and then reduced with further degradation. The effect of degradation on modulus was much bigger than that on compressive strength. Based on excellent cell affinity of the PLGA(70/30)/TCP composite scaffold, a potentially useful bone tissue engineering scaffold is proposed.     

Porous scaffolds based on cross-linking of poly(L-glutamic acid)

Porous scaffolds based on water-soluble PLGA and CS were prepared. The pores were verified to be alveolate, uniform and continuous. The effects of freezing temperature, freeze-drying time, solid content and molecular weight of reactants on the pore structure of the scaffolds were studied. The scaffold morphology could be adjusted by changing the freezing temperature and solid content of reacting polymer. Their degradation rate can be adjusted by changing the proportion of PLGA and CS. The porosity of scaffolds was higher than 90% and the high swelling ratio showed that these scaffolds had excellent hydrophilic performance. The in vitro culture of chondrocytes indicates that the obtained PLGA/CS porous scaffolds are very promising biomaterials for tissue engineering applications.     

Fabrication of poly(lactide‐co‐glycolide) scaffold embedded spatially with hydroxyapatite particles on pore walls for bone tissue engineering

Poly(lactide‐co‐glycolide) (PLGA) scaffolds embedded spatially with hydroxyapatite (HA) particles on the pore walls (PLGA/HA‐S) were fabricated by using HA‐coated paraffin spheres as porogens, which were prepared by Pickering emulsion. For comparisons, PLGA scaffolds loaded with same amount of HA particles (2%) in the matrix (PLGA/HA‐M) and pure PLGA scaffolds were prepared by using pure paraffin spheres as porogens. Although the three types of scaffolds had same pore size (450–600 µm) and similar porosity (90%–93%), the PLGA/HA‐S showed the highest compression modulus. The embedment of the HA particles on the pore walls endow the PLGA/HA‐S scaffold with a stronger ability of protein adsorption and mineralization as well as a larger mechanical strength against compression. In vitro culture of rat bone marrow stem cells revealed that cell morphology and proliferation ability were similar on all the scaffolds. However, the alkaline phosphatase activity was significantly improved for the cells cultured on the PLGA/HA‐S scaffolds. Therefore, the method for fabricating scaffolds with spatially embedded nanoparticles provides a new way to obtain the bioactive scaffolds for tissue engineering. Copyright © 2011 John Wiley & Sons, Ltd.     

循环应力下PLGA多孔支架对地塞米松的控制释放

摘要 采用喷雾干燥法制备包载地塞米松(Dex)的聚L-丙交酯-b-聚乙二醇(PLLA-PEG)微球, 以热致相分离/粒子洗去法制备聚乙交酯-co-丙交酯(PLGA)多孔支架, 通过复合溶结法将载药微球固定于PLGA多孔支架中, 制得载药微球-支架(记为MS-S). 另外, 在支架制备过程中将Dex直接加入PLGA溶液中, 制得对比的直接载药支架(记为D-S). 以扫描电镜观察微球和支架的微观形貌, 在循环压应力与水浴摇床两种环境下分别对上述两种载药支架进行控制释放Dex的实验, 用紫外-可见光分光光度计测定Dex的累积释放量. 结果表明, Dex及微球的载入对PLGA支架的整体形貌影响较小; 循环压应力显著提高了Dex从载药支架中的释放速率, 与D-S相比, MS-S延缓了药物的释放. 研究模拟体内循环压应力下支架控制释放药物规律对于实现理想的临床效果具有重要意义.     

Polyester scaffolds with bimodal pore size distribution for tissue engineering

This paper presents a method for the preparation of porous poly(L-lactide)/poly[(L-lactide)-co-glycolide] scaffolds for tissue engineering. Scaffolds were prepared by a mold pressing-salt leaching technique from structured microparticles. The total porosity was in the range 70-85%. The pore size distribution was bimodal. Large pores, susceptible for osteoblasts growth and proliferation had the dimensions 50-400 microm. Small pores, dedicated to the diffusion of nutrients or/and metabolites of bone forming cells, as well as the products of hydrolysis of polyesters from the walls of the scaffold, had sizes in the range 2 nm-5 microm. The scaffolds had good mechanical strength (compressive modulus equal to 41 MPa and a strength of 1.64 MPa for 74% porosity). Scaffolds were tested in vitro with human osteoblast-like cells (MG-63). It was found that the viability of cells seeded within the scaffolds obtained using the mold pressing-salt leaching technique from structured microparticles was better when compared to cells cultured in scaffolds obtained by traditional methods. After 34 d of culture, cells within the tested scaffolds were organized in a tissue-like structure. Photos of section of macro- and mesoporous PLLA/PLGA scaffold containing 50 wt.-% of PLGA microspheres after 34 d of culture. Dark spots mark MG-63 cells, white areas belong to the scaffold. The specimen was stained with haematoxylin/eosin. Bar = 100 microm.     

低热-高压法制备PLGA多孔支架及其体外降解研究

采用低热-高压法制备了聚(dl-丙交酯／乙交酯)75／25(PLGA75／25)组织工程多孔支架。该方法避免了使用有机溶剂，支架的孔隙率在90％以上，孔径大小分布均匀。多孔支架经过酒精处理后，支架表面产生许多微小的凹陷；用藻酸钙改性处理后，支架形态保持良好。两种处理都使支架的压缩强度有所增大，亲水性增强。虽然孔隙率高的支架降解速率稍慢，但其体外降解规律基本一致：特性粘数争力学强度衰减快，而质量损失较慢，降解6周后，支架的质量损失仅为3％左右；体外降解3周后，支架的形态保持良好，可望在细胞移植争组织修复的早期发挥支撑作用。     

In Vivo Degradation Behavior of Porous Composite Scaffolds of Poly（lactide-co-glycolide） and Nano-hydroxyapatite Surface Grafted with Poly（L-lactide）

The biodegradable porous composite scaffold, composed of poly(lactide-co-glycolide)(PLGA) and hydroxyapatite nanoparticles(n-HAP) surface-grafted with poly(L-lactide)(PLLA)(g-HAP)(g-HAP/PLGA), was fabricated using the solvent casting/particulate leaching method, and its in vivo degradation behavior was investigated by the intramuscular implantation in rabbits. The composite of un-grafted n-HAP/PLGA and neat PLGA were used as controls. The scaffolds had interconnected pore structures with average pore sizes between 137 μm and 148 μm and porosities between 83% and 86%. There was no significant difference in the pore size and porosity among the three scaffolds. Compared with n-HAP/PLGA, the thermo-degradation temperature(Tc) of g-HAP/PLGA decreased while its glass transition temperature(Tg) increased. The weight change, grey value analysis of radiographs and SEM observation showed that the composite scaffolds of g-HAP/PLGA and n-HAP/PLGA showed slower degradation and higher mineralization than the pure PLGA scaffold after the intramuscular implantation. The rapid degradation of PLGA, g-HAP/PLGA and n-HAP/PLGA occurred at 8–12 weeks, 12–16 weeks and 16–20 weeks, respectively. Compared with n-HAP/PLGA, g-HAP/PLGA showed an improved absorption and biomineralization property mostly because of its improved distribution of HAP nanoparticles. The levels of both calcium and phosphorous in serum and urine could be affected to some extent at 3–4 weeks after the implantation of g-HAP/PLGA, but the biochemical detection of serum AST, ALT, ALP, and GGT as well as BUN and CRE showed no obvious influence on the functions of liver and kidney.     

Preparation and modification of collagen-based porous scaffold for tissue engineering

In the effort to generate cartilage tissues using mesenchymal stem cells, porous scaffolds with prescribed biomechanical properties were prepared. Scaffolds with interconnected pores were prepared via lyophilisation of frozen hydrogels made from collagen modified with chitosan nanofibres, hyaluronic acid, copolymers based on poly(ethylene glycol) (PEG), poly(lactic-co-glycolic acid) (PLGA), and itaconic acid (ITA), and hydroxyapatite nanoparticles. The modified collagen compositions were cross-linked using N-(3-dimethylamino propyl)-N′-ethylcarbodiimide hydrochloride (EDC) combined with N-hydroxysuccinimide (NHS) in water solution. Basic physicochemical and mechanical properties were measured and an attempt to relate these properties to the molecular and supermolecular structure of the modified collagen compositions was carried out. Scaffolds containing hydrophilic chitosan nanofibres showed the highest swelling ratio (SR = 20–25) of all the materials investigated, while collagen modified with an amphiphilic PLGA-PEG-PLGA copolymer or functionalised with ITA exhibited the lowest swelling ratio (SR = 5–8). The best resistance to hydrolytic degradation was obtained for hydroxyapatite containing scaffolds. On the other hand, the fastest degradation rate was observed for synthetic copolymer-containing scaffolds. The results showed that the addition of hydroxyapatite or hyaluronic acid to the collagen matrix increases the rigidity in comparison to the collagen-chitosan scaffold. Collagen scaffold modified with hyaluronic acid presented reduced deformation at break while the presence of hydroxypatatite enhanced the scaffold deformation under tensile loading. The tensile elastic modulus of chitosan nanofibre collagen scaffold was the lowest but closest to the articular cartilage; however, the strength and deformation to failure increased up to 200 %. Presented at the 1st Bratislava Young Polymer Scientists Workshop, Bratislava, 20–23 August 2007.     

3D porous acellular cartilage matrix scaffold with surface mediated sustainable release of TGF-β3 for cartilage engineering

Acellular tissue matrix scaffolds are much closer to tissue’s complex natural structure and biological characteristics, thus assess great advantages in cartilage engineering. We used rabbit costal cartilage to prepare acellular microfilaments and further 3D porous acellular cartilage scaffold via crosslinking. Poly(l-lysine)/hyaluronic acid (PLL/HA) multilayer film was then built up onto the surface of the resulting porous scaffold. Furthermore, TGF-β3 was loaded into the PLL/HA multilayer film coated scaffold to obtain a 3D porous acellular cartilage scaffold with sustained releasing of TGF-β3 up to 60 days. The success of this project will provide a new way for the treatment of articular cartilage defects. Meanwhile, the anchoring and on-site sustained releasing of growth factors mediated by polyelectrolyte multilayered film can also provide a new method for improving the biocompatibility and the biofunctionality for other implanted biomaterials.     

Characteristics of PLGA-gelatin complex as potential artificial nerve scaffold

The segmentation lesion of peripheral nerve will seriously impair the motion and sensation of the patients, and the satisfactory recovery of segmented peripheral nerve by autograft or allograft is still a great challenge posing to the neurosurgery. Apart from autograft for nerve repair, different allograft has been studying. In this study, a scaffold fabricated with polylactic acid-co-glycolic acid (PLGA) copolymer and gelatin was evaluated to be a potential artificial nerve scaffold in vitro. The effect of different mass ratio between PLGA and gelatin upon the characteristics of PLGA–gelatin scaffolds such as microstructure, mechanical property, degradation behavior in PBS, cell adhesion property were investigated. The results showed the homogeneity and mechanical property of the scaffolds became poor with the increase of gelatin, and the rate of max water-uptake and the mass loss of scaffolds increases with the increase of gelatin, and the cells could adhere to the scaffolds. Those indicated the scaffolds fabricated by the PLGA–gelatin complex had excellent biocompatibility, suitable mechanical property and sustained-release characteristics, which would meet the requirements for artificial nerve scaffold.     

Microfluidic chip-based fabrication of PLGA microfiber scaffolds for tissue engineering

In this paper, we have developed a method to produce poly(lactic- co-glycolic acid) (PLGA) microfibers within a microfluidic chip for the generation of 3D tissue engineering scaffolds. The synthesis of PLGA fibers was achieved by using a polydimethylsiloxane (PDMS)-based microfluidic spinning device in which linear streams of PLGA dissolved in dimethyl sulfoxide (DMSO) were precipitated in a glycerol-containing water solution. By changing the flow rate of PLGA solution from 1 to 50 microL/min with a sheath flow rate of 250 or 1000 microL/min, fibers were formed with diameters that ranged from 20 to 230 microm. The PLGA fibers were comprised of a dense outer surface and a highly porous interior. To evaluate the applicability of PLGA microfibers generated in this process as a cell culture scaffold, L929 fibroblasts were seeded on the PLGA fibers either as-fabricated or coated with fibronectin. L929 fibroblasts showed no significant difference in proliferation on both PLGA microfibers after 5 days of culture. As a test for application as nerve guide, neural progenitor cells were cultured and the neural axons elongated along the PLGA microfibers. Thus our experiments suggest that microfluidic chip-based PLGA microfiber fabrication may be useful for 3D cell culture tissue engineering applications.     

Biocompatibility In-vitro of Gel/HA Composite Scaffolds Containing Nano-Bioactive Glass for Tissue Engineering

Designing and fabricating nanocomposite scaffolds for bone regeneration from different biodegradable polymers and bioactive materials are an essential step to engineer tissues. In this study, the composite scaffold of gelatin/hyaluronic acid (Gel/HA) containing nano-bioactive glass (NBG) was prepared by using freeze-drying method. The biocompatibilities in-vitro of the Gel-HA/NBG composite scaffolds, including MTT assay, ALP activity, von Kossa staining and tetracycline staining, were investigated. The SEM observations revealed that the prepared scaffolds were porous with three-dimensional (3D) and interconnected microstructure, agglomerated NBG particles were uniformly dispersed in the matrix. MTT results indicated that the tested materials didn't show any cytotoxicity. The presence of NBG in the composite scaffold further enhanced the ALP activity in comparison with the pure Gel/HA scaffold. The von Kossa staining and tetracycline staining results also indicated that the NBG may improve the cell response. Therefore, the results indicated the nanocomposite scaffold made from Gel, HA and NBG particles could be considered as a potential bone tissue engineering implant.