Synthesis of graphene oxide supported copper–cobalt ferrite material functionalized by arginine amino acid as a new high–performance catalyst

A novel Cu_0.5Co_0.5Fe₂O₄@Arg–GO catalytic system was successfully prepared by immobilization of copper substituted cobalt ferrite nanoparticles on arginine–grafted graphene oxide nanosheets, in which ferrite moiety acts as an oxidation catalyst and arginine has the role of base catalyst. Also, arginine amino acid was used to modify the surface of graphene oxide nanosheets which the prepared support can improve dispersion and uniform loading of nanoparticles. The prepared nanocomposite was characterized by flame atomic absorption spectroscopy (FAAS), inductively coupled plasma optical emission spectrometer (ICP–OES), energy dispersive spectroscopy (EDS), Fourier transform infrared spectroscopy (FT–IR), ultraviolet–visible spectroscopy (UV–vis), Raman spectroscopy, thermogravimetric analysis (TGA), x–ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM) analysis. The prepared Cu_0.5Co_0.5Fe₂O₄@Arg–GO nanocomposite was used as an efficient catalyst for one–pot tandem oxidative synthesis of 2–phenylbenzimidazole derivatives in good yields.     

Magnetic Graphene Oxide Anchored Sulfonic Acid as a Novel Nanocatalyst for the Synthesis of N‐aryl‐2‐amino‐1,6‐naphthyridines

Magnetic graphene oxide functionalized with sulfonic acid (Fe₃O₄‐GO‐SO₃H) was used as a new recyclable nanocatalyst for one‐pot synthesis of N‐aryl‐2‐amino‐1,6‐naphthyridine derivatives under solvent free conditions. The catalyst could be easily recovered from the reaction mixture by an external magnet and reused without significant decrease in activity even after 4 runs. This nanocatalyst exhibited better activities to other commercially available sulfonic acid catalysts.     

Phosphomolybdic acid supported on Schiff base functionalized graphene oxide nanosheets: Preparation,characterization, and first catalytic application in the multi‐component synthesis of tetrahydrobenzo[a]xanthene‐11‐ones

New Schiff base (SB) functionalized graphene oxide (GO) nanosheets containing phosphomolybdic counter‐anion H₂PMo₁₂O₄₀^¯ (H₂PMo) were successfully prepared by grafting of 3‐aminopropyltriethoxysilane (APTS) on GO nanosheets followed by condensation with benzil and finally reaction with phosphomolybdic acid (H₃PMo₁₂O₄₀, denoted as H₃PMo) and characterized using Fourier transform infrared (FT‐IR) spectroscopy, field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), atomic force microscopy (AFM), particle size distribution, energy‐dispersive X‐ray (EDX) analysis, EDX elemental mapping, and inductively coupled plasma optical emission spectrometry (ICP‐OES). The prepared new nanomaterial, denoted as GO‐SB‐H₂PMo, was shown to be an efficient heterogeneous catalyst in one‐pot, three‐component reaction of β‐naphthol, aldehydes, and dimedone, giving high yields of tetrahydrobenzo[a]xanthene‐11‐ones within short reaction times. The catalyst is readily recovered by simple filtration and can be recycled and reused several times with no significant loss of catalytic activity.     

Caesium carbonate supported on hydroxyapatite‐encapsulated Ni0.5Zn0.5Fe2O4 nanocrystallites as a novel magnetically basic catalyst for the one‐pot synthesis of pyrazolo[1,2‐b]phthalazine‐5,10‐diones

A novel nanomagnetic basic catalyst of caesium carbonate supported on hydroxyapatite‐coated Ni_0.5Zn_0.5Fe₂O₄ magnetic nanoparticles (Ni_0.5Zn_0.5Fe₂O₄@HAP‐Cs₂CO₃) was prepared. This new catalyst was fully characterized using Fourier transform infrared spectroscopy, transmission and scanning electron microscopy, X‐ray diffraction and vibrating sample magnetometry techniques, and then the catalytic activity of this catalyst was investigated in the synthesis of 1H‐pyrazolo[1,2‐b]phthalazine‐5,10‐dione derivatives. Also, Ni_0.5Zn_0.5Fe₂O₄@HAP‐Cs₂CO₃ could be reused at least five times without significant loss of activity and could be recovered easily by applying an external magnet. Thus, the developed nanomagnetic catalyst is potentially useful for the green and economic production of organic compounds. Copyright © 2015 John Wiley & Sons, Ltd.     

A practical and highly efficient synthesis of densely functionalized nicotinonitrile derivatives catalyzed by zinc oxide‐decorated superparamagnetic silica attached to graphene oxide nanocomposite

Zinc oxide‐decorated superparamagnetic silica attached to graphene oxide (Fe₃O₄/SiO₂/PTS‐GO‐ZnO), as a novel nanocomposite, was designed, and its core‐shell structure was appropriately characterized by different spectroscopy or microscopy methods and thermal techniques as well as measuring of its porosity and magnetic properties. The catalytic activity of Fe₃O₄/SiO₂/PTS‐GO‐ZnO, as a reusable heterogeneous catalyst, was investigated for efficient one‐pot multi‐component synthesis of medicinally important functionalized 2‐amino‐6‐(2‐oxo‐2H‐chromen‐3‐yl)‐4‐arylnicotinonitrile derivatives. The significant features of the present procedure are mild reaction conditions, low loading of the catalyst, high to quantitative yields of the desired products, avoiding the use of toxic heavy metals or solvents, simple isolation and purification of the products, and stability as well as reusability of the catalyst after at least six consecutive runs.     

Evaluating the efficiency of the GO‐Fe3O4/TiO2 mesoporous photocatalyst for degradation of chlorpyrifos pesticide under visible light irradiation

In this work, the photocatalytic activity of the synthesized graphene oxide (GO)‐Fe₃O₄/TiO₂ mesoporous photocatalysts was evaluated using chlorpyrifos (CP) as a contaminant. The nano‐photocatalyst was characterized by X‐ray diffraction, field emission scanning electron microscopy with energy‐dispersive X‐ray spectroscopy, transmission electron microscopy, and specific surface area by the Brunauer–Emmett–Teller method. Using visible light, the GO‐Fe₃O₄/TiO₂ mesoporous photocatalyst was investigated on the degradation of CP pesticide. The GO‐Fe₃O₄/TiO₂ photocatalyst displayed a good photocatalytic activity, which was achieving 97% of CP degradation after 60 min. Finally, experiments were performed to evaluate GO‐Fe₃O₄/TiO₂ mesoporous nanocatalyst activity on repeated applications; after several uses, its photocatalytic activity was retained, which indicated stability.     

One‐pot synthesis of magnetic palladium–NiFe2O4–graphene oxide composite: an efficient and recyclable catalyst for Heck reaction

A magnetically separable NiFe₂O₄@GO–Pd composite (GO = graphene oxide) was successfully prepared by a facile one‐pot hydrothermal strategy. This new kind of hybrid material was fully characterized using powder X‐ray diffraction, Raman spectroscopy, X‐ray photoelectron spectroscopy, transmission electron microscopy and vibrating sample magnetometry. Structural characterizations confirmed the formation of NiFe₂O₄ and Pd nanocrystals, and the close anchoring between nanoparticles and GO sheets. Additionally, the as‐prepared NiFe₂O₄@GO–Pd nanocomposite was effectively employed in the palladium‐catalyzed Heck reaction in an ethanol–water system as a green solvent. The catalyst was completely recoverable with the simple application of an external magnetic field and with no obvious loss of catalytic activity even after six repeated cycles. Copyright © 2016 John Wiley & Sons, Ltd.     

One‐pot synthesis of magnetic zeolitic imidazolate framework/grapheme oxide composites for the extraction of neonicotinoid insecticides from environmental water samples

Magnetic zeolitic imidazolate framework 67/graphene oxide composites were synthesized by one‐pot method at room temperature for the first time. Electrostatic interactions between positively charged metal ions and both negatively charged graphene oxide and Fe₃O₄ nanoparticles were expected to chemically stabilize magnetic composites to generate homogeneous magnetic products. The additional amount of graphene oxide and stirring time of graphene oxide, Co²⁺, and Fe₃O₄ solution were investigated. The zeolitic imidazolate framework 67 and Fe₃O₄ nanoparticles were uniformly attached on the surface of graphene oxide. The composites were applied to magnetic solid‐phase extraction of five neonicotinoid insecticides in environmental water samples. The main experimental parameters such as amount of added magnetic composites, extraction pH, ionic strength, and desorption solvent were optimized to increase the capacity of adsorbing neonicotinoid insecticides. The results show limits of detection at signal‐to‐noise ratio of 3 were 0.06–1.0 ng/mL under optimal conditions. All analytes exhibited good linearity with correlation coefficients of higher than 0.9915. The relative standard deviations for five neonicotinoid insecticides in environmental samples ranged from 1.8 to 16.5%, and good recoveries from 83.5 to 117.0% were obtained, indicating that magnetic zeolitic imidazolate framework 67/graphene oxide composites were feasible for analysis of trace analytes in environmental water samples.     

Self‐Assembling Synthesis of Free‐standing Nanoporous Graphene–Transition‐Metal Oxide Flexible Electrodes for High‐Performance Lithium‐Ion Batteries and Supercapacitors

The synthesis of nanoporous graphene by a convenient carbon nanofiber assisted self‐assembly approach is reported. Porous structures with large pore volumes, high surface areas, and well‐controlled pore sizes were achieved by employing spherical silica as hard templates with different diameters. Through a general wet‐immersion method, transition‐metal oxide (Fe₃O₄, Co₃O₄, NiO) nanocrystals can be easily loaded into nanoporous graphene papers to form three‐dimensional flexible nanoarchitectures. When directly applied as electrodes in lithium‐ion batteries and supercapacitors, the materials exhibited superior electrochemical performances, including an ultra‐high specific capacity, an extended long cycle life, and a high rate capability. In particular, nanoporous Fe₃O₄–graphene composites can deliver a reversible specific capacity of 1427.5 mAh g^?1 at a high current density of 1000 mA g^?1 as anode materials in lithium‐ion batteries. Furthermore, nanoporous Co₃O₄–graphene composites achieved a high supercapacitance of 424.2 F g^?1. This work demonstrated that the as‐developed freestanding nanoporous graphene papers could have significant potential for energy storage and conversion applications.     

Preparation and adsorption of magnetic Co<Subscript>0.5</Subscript>Ni<Subscript>0.5</Subscript>Fe<Subscript>2</Subscript>O<Subscript>4</Subscript>-chitosan nanoparticles

In this paper, magnetic chitosan microspheres were prepared by the emulsification cross-linking technique, with glutaraldehyde as the cross-linking agent, liquid paraffin as the dispersant, and the Span-80 as emulsifier. The time of cross-linking and the ratio of Co_0.5Ni_0.5Fe₂O₄/chitosan were investigated. The morphology was studied by different instruments. The adsorption performance was investigated and the effects of initial concentration of methyl orange, the time of cross-linking, and the amount of adsorbent were discussed. It is found that the product has uniform morphology when the ratio of magnetic Co_0.5Ni_0.5Fe₂O₄/chitosan is 1 : 2 and the time of cross-linking is 5 h; At room temperature, magnetic Co_0.5Ni_0.5Fe₂O₄–chitosan has a good adsorption toward methyl orange when the magnetic Co_0.5Ni_0.5Fe₂O₄/chitosan dosage is 20 mg.     

Synergistic Ternary Composite (Carbon/Fe3O4@Graphene) with Hollow Microspherical and Robust Structure for Li‐Ion Storage

The electrode materials with hollow structure and/or graphene coating are expected to exhibit outstanding electrochemical performances in energy‐storage systems. 2D graphene‐wrapped hollow C/Fe₃O₄ microspheres are rationally designed and fabricated by a novel facile and scalable strategy. The core@double‐shell structure SPS@FeOOH@GO (SPS: sulfonated polystyrene, GO: graphene oxide) microspheres are first prepared through a simple one‐pot approach and then transformed into C/Fe₃O₄@G (G: graphene) after calcination at 500 °C in Ar. During calcination, the Kirkendall effect resulting from the diffusion/reaction of SPS‐derived carbon and FeOOH leads to the formation of hollow structure carbon with Fe₃O₄ nanoparticles embedded in it. In the rationally constructed architecture of C/Fe₃O₄@G, the strongly coupled C/Fe₃O₄ hollow microspheres are further anchored onto 2D graphene networks, achieving a strong synergetic effect between carbon, Fe₃O₄, and graphene. As an anode material of Li‐ion batteries (LIBs), C/Fe₃O₄@G manifests a high reversible capacity, excellent rate behavior, and outstanding long‐term cycling performance (1208 mAh g^?1 after 200 cycles at 100 mA g^?1).     

Preparation of Co3O4/graphene Oxide Composites by a Depositing‐decompostion Method and its Application for Electrochemical Determination of Glucose

Co₃O₄/graphene oxide (GO) nanocomposites were successfully prepared by a depositing‐decomposition method. The as‐prepared samples were characterized by scanning electron microscopy (SEM) and Raman spectroscopy. Cyclic voltammetry (CV) was used to evaluate the electrochemical response of a glass carbon electrode (GCE) modified with Co₃O₄/GO nanocomposite towards glucose. Compared with the Co₃O₄/GCE, the Co₃O₄/GO/GCE exihibits higher electrocatalytic activity due to the synergistic effects of electrocatalytic ability of Co₃O₄ and large surface of GO. The Co₃O₄/GO/GCE was applied for glucose detection in alkaline solution. The linear current response range of glucose on Co₃O₄/GO/GCE covered the range from 9 × 10^?5 to 6.03 × 10^?3 M, with a detection limit of 5.2 × 10^?7 M (S/N = 3).     

Synthesis and characterization of graphene oxide‐based hybrid ligand and its metal complexes: Highly efficient sensor and catalytic properties

A new graphene oxide‐based hybrid material (HL) and its Co(II), Cu(II) and Ni(II) metal complexes were prepared. Firstly, graphene oxide and (3‐aminopropyl)trimethoxysilane were reacted to give graphene oxide–3‐(aminopropyl)trimethoxysilane (GO‐APTMS) hybrid material. After that, hybrid material HL was synthesized from the reaction of GO‐APTMS and 2,6‐diformyl‐4‐methylphenol. Finally, Co(II), Cu(II) and Ni(II) complexes of HL were obtained. All the materials were characterized using various techniques. The chemosensor properties of HL were investigated against Na⁺, K⁺, Cd²⁺, Co²⁺, Cu²⁺, Hg²⁺, Ni²⁺, Zn²⁺, Al³⁺, Cr³⁺, Fe³⁺ and Mn³⁺ ions and it was found that HL has selective chemosensing to Fe³⁺ ion. All the graphene oxide‐supported complexes were used as heterogeneous catalysts in the oxidation of 2‐methylnaphthalene (2MN) to 2‐methyl‐1,4‐naphthoquinone (vitamin K₃, menadione) in the presence of hydrogen peroxide, acetic acid and sulfuric acid. The Cu(II) complex showed good catalytic properties compared to the literature. The selectivity of 2MN to vitamin K₃ was 60.23% with 99.75% conversion using the Cu(II) complex.     

Dioxomolybdenum(VI) complex covalently attached to amino‐modified graphene oxide: heterogeneous catalyst for the epoxidation of alkenes

Transition metal salen complex MoO₂–salen was successfully tethered onto amino‐functionalized graphene oxide (designated as MoO₂–salen–GO), which was tested in the epoxidation of various alkenes using tert‐butylhydroperoxide or H₂O₂ as oxidant. Characterization results showed that dioxomolybdenum(VI) complex was successfully grafted onto the amino‐functionalized graphene oxide and the structure of the graphene oxide was well preserved after several stepwise synthesis procedures. Catalytic tests showed that heterogeneous catalyst MoO₂–salen–GO was more active than its homogeneous analogue MoO₂–salen in the epoxidation of cyclooctene due to site isolation. In addition, the MoO₂–salen–GO catalyst could be reused three times without significant loss of activity. Copyright © 2014 John Wiley & Sons, Ltd.     

Fe3O4@L‐arginine magnetic nanoparticles: A novel and magnetically retrievable catalyst for the synthesis of 1′3‐diaryl‐2N‐azaphenalene

The catalytic activity of l ‐arginine‐coated nano‐Fe₃O₄ particles (Fe₃O₄@l ‐arginine) proves they are a novel magnetic catalyst without the use of heat and reflux for the synthesis of 1,3‐diaryl‐2‐N‐azaphenalene derivatives and n‐acyl‐1,3‐diaryl‐2‐N‐azaphenylene derivatives in a one‐pot pseudo‐five‐component condensation reaction of compounds of 2,7‐naphthalene diol, aldehydes, and ammonia derivatives (ammonium acetate or ammonium hydrogen phosphate) and solvent (water and alcohol) with high yield and short reaction times, economical, and simple workup. The structure and magnetic properties of the obtained nanoparticles were characterized via Fourier transform infrared spectroscopy (IR) and field emission scanning electron microscopy (FE‐SEM). The results demonstrated that the average size of the synthesized magnetite nanoparticles is about 21 nm. In addition, the heterogeneous catalyst can be easily recovered magnetically and can be reused for further runs without significant loss of its catalytic activity.     

Application of Nanosized Cu0.5Co0.5Fe2O4 Spinel Ferrite as a Nanocatalyst in the Synthesis of 14‐Aryl‐14H‐dibenzo[a,j]xanthene Derivatives under Solvent‐free Conditions

Copper and cobalt substituted spinel ferrites Cu_1‐xCo_xFe₂O₄ (0≤X≤1) have been synthesized by using hydrothermal method. The resultant spinel ferrites were systematically characterized by different techniques such as X‐ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X‐ray spectroscopy (EDX), and Fourier transform infrared spectroscopy (FT‐IR). It was indicated that all the resultant spinel ferrites obtained by the hydrothermal method had the single‐phase crystalline. The resultant spinel ferrites were employed in the synthesis of 14‐aryl‐14‐H‐dibenzo[a,j]xanthene derivatives. It was found that the nanocatalyst Cu_0.5Co_0.5Fe₂O₄ displays the best performance in the synthesis of 14‐aryl‐14H‐dibenzo[a,j]xanthenes. The catalyst was reused several times without significant loss of its activity for the preparation of desired product. In addition high yields of the products, solvent‐free conditions and reusability of the catalyst are other worthwhile advantages of the present study.     

Graphene‐Fe3O4 as a magnetic solid‐phase extraction sorbent coupled to capillary electrophoresis for the determination of sulfonamides in milk

Graphene‐Fe₃O₄ nanoparticles were prepared using one‐step solvothermal method and characterized by X‐ray diffraction, FTIR spectroscopy, scanning electron microscopy, and vibrating sample magnetometry. The results demonstrated that Fe₃O₄ nanoparticles were homogeneously anchored on graphene nanosheets. The as‐synthesized graphene‐Fe₃O₄ nanoparticles were employed as sorbent for magnetic solid‐phase extraction of sulfonamides in milk prior to capillary electrophoresis analysis. The optimal capillary electrophoresis conditions were as follows: 60 mmol/L Na₂HPO₄ containing 2 mmol/L ethylenediaminetetraacetic acid disodium salt and 24% v/v methanol as running buffer, separation voltage of 14 kV, and detection wavelength of 270 nm. The parameters affecting extraction efficiency including desorption solution, the amount of graphene‐Fe₃O₄ nanoparticles, extraction time, and sample pH were investigated in detail. Under the optimal conditions, good linearity (5–200 μg/L) with correlation coefficients ≥0.9910 was obtained. The limits of detection were 0.89–2.31 μg/L. The relative standard deviations for intraday and interday analyses were 4.9–8.5 and 4.0–9.0%, respectively. The proposed method was successfully applied to the analysis of sulfonamides in milk samples with recoveries ranging from 62.7 to 104.8% and relative standard deviations less than 10.2%.     

Role of PVA in synthesis of nano Co3O4‐decorated graphene oxide

Polymeric materials have been found to be ideal candidates for the synthesis of organic–inorganic nanomaterials. We have obtained Co₃O₄‐decorated graphene oxide (GO) nanocomposites by a simple polymer combustion method. Polyvinyl alcohol (PVA) of two different molecular weights, 14,000 and 125,000, was used for the synthesis. The pristine sample was annealed at 300, 500, and 800°C. PVA has played an important role in the formation of GO and Co₃O₄ nanoparticles. Synthesized Co₃O₄–GO nanocomposites were characterized by X‐ray diffraction, Fourier transform infrared, Raman, electron paramagnetic resonance, transmission electron microscopy, and vibrating sample magnetometry. Reflection peaks at 12° and 37° in an X‐ray study confirm the formation of Co₃O₄–GO. Raman study validates the presence of GO in nanocomposites of Co₃O₄–GO. Room temperature ferromagnetism was observed in all annealed samples. The highest coercivity of 462 G was observed for 300°C annealed samples as compared with bulk Co₃O₄. On the basis of the results obtained, a mechanism of formation is proposed. Copyright © 2015 John Wiley & Sons, Ltd.     

A Sensitive Electrochemical Sensor Based on Graphene Oxide Nanosheets Decorated by Fe3O4@Au Nanostructure Stabilized on Polypyrrole for Efficient Triclosan Sensing

Triclosan is broadly utilized as preservative or antiseptic in various cosmetic and personal care products. It becomes hazardous for environmental safety and human health more than a certain concentration. In this research, graphene oxide (GO) nanosheets were prepared by composing Fe₃O₄@Au nanostructure decorated GO together with polypyrrole (PPy) (Fe₃O₄@Au‐PPy/GO nanocomposite) in a facile way. The composite excellent increased the electrochemical response, presenting a high sensitive electrochemical method for triclosan detection. The synthesized Fe₃O₄@Au‐PPy/GO nanocomposite was characterized for its morphological, magnetically and structural properties by FESEM‐mapping, TEM, and XRD. The Fe₃O₄@Au‐PPy/GO nanocomposites modified glassy carbon electrodes (GCE), Fe₃O₄@Au‐PPy/GO GCE, showed a higher sensitivity good stability, reproducibility, lower LOD (2.5×10^?9 M) and potential practical application in electrochemical detection of triclosan under optimized experimental conditions.     

Dual Amplified Electrochemical Immunosensor for Hepatitis B Virus Surface Antigen Detection Using Hemin/G‐Quadruplex Immobilized onto Fe3O4‐AuNPs or (Hemin‐Amino‐rGO‐Au) Nanohybrid

A sensitive electrochemical immunosensor for Hepatitis B virus surface antigen (HBsAg) detection was fabricated based on hemin/G‐quadruplex interlaced onto Fe₃O₄‐AuNPs or hemin ‐amino‐reduced graphene oxide nanocomposite (H‐amino‐rGO‐Au). G‐quadruplex DNAzyme, which is composed of hemin and guanine‐rich nucleic acid, is an effective signal amplified tool for its outstanding peroxidase activity and Fe₃O₄‐AuNPs or (H‐amino‐rGO‐Au) nanocomposites with quasi‐enzyme activity provide appropriate support for the immobilization of hemin/G‐quadruplex. The target protein was sandwiched between the primary antibody immobilized on the GO and secondary antibody immobilized on the Fe₃O₄‐AuNPs or (H‐amino‐rGO‐Au) nanocomposites and glutaraldehyde was used as linking agent for the immobilization of primary antibody on the surface of GO. Both Fe₃O₄‐AuNPs and H‐amino‐rGO‐Au nanocomposite and also hemin/G‐quadruplex can cooperate the electrocatalytic reduction of H₂O₂ in the presence of methylene blue as mediator. The proposed immunosensor has a wide linear dynamic range of 0.1 pg/ml to 300 pg/ml with a detection limit of 60 fg/ml when Fe₃O₄‐AuNPs was used for immobilization of hemin/G‐quadruplex, while the dynamic range and DL were 0. 1–1000 pg/mL and 10 fg/mL, respectively in the presence of H‐amino‐rGO‐ Au nanocomposite as platform for immobilizing of hemin/G‐quadruplex. The proposed immunosensor was also used for analysis of HBsAg in spiked human serum samples with satisfactory results.