Application of microcrystalline cellulose as an efficient and cheap sorbent for the extraction of metoprolol from plasma and wastewater before HPLC–MS/MS determination

A dispersive solid-phase extraction method based on a new sorbent has been performed on plasma and wastewater samples to determine metoprolol by high-performance liquid chromatography–tandem mass spectrometry. In this study, the analyte was adsorbed from the samples onto microcrystalline cellulose as a green and efficient sorbent and then eluted for use in the determination step. In the mass spectrometer, the analyte was detected in the positive mode and selectivity of the analysis was increased by sequential mass analysis through multiple reaction monitoring. All of the effective parameters in the extraction of metoprolol from plasma and wastewater were optimized. Under optimal conditions the method was linear in the ranges of 1–1,000 and 0.1–1,000 ng/ml in plasma and wastewater samples, respectively. The detection limits of the method were 0.30 and 0.03 ng/ml in plasma and wastewater samples, respectively. The data showed that the method provides low detection limit, wide linear range, good precision and high extraction recovery. Finally several plasma and wastewater samples were successfully analyzed using the method. The use of a small amount of a green and inexpensive sorbent and a low volume of plasma without the need for further pretreatment steps are the main advantages of the method.     

Solubility of phenobarbital in aqueous cosolvent mixtures revisited: IKBI preferential solvation analysis

The preferential solvation parameters of phenobarbital in aqueous binary mixtures of 1,4-dioxane, t-butanol, n-propanol, ethanol, propylene glycol and glycerol were derived from solution thermodynamic properties by using the IKBI method. This drug is sensitive to preferential solvation effects in all these mixtures. The preferential solvation parameter by the cosolvent (δx_1,3) is negative in almost all the water-rich mixtures but positive in mixtures with similar proportions of solvents and cosolvent-rich mixtures, except in 1-propanol + water mixtures, where negative values are also found in mixtures with x₁ ≥ 0.70. Hydrophobic hydration around the non-polar ethyl and phenyl groups of this drug in water-rich mixtures could play a relevant role in drug solvation. Otherwise, in mixtures of similar solvent compositions and in cosolvent-rich mixtures the preferential solvation by cosolvent could be due to the acidic behaviour of the drug.     

Comments on “Thermodynamic Models for Correlation of Solubility of Hexaquocobalt(II) Bis(<Emphasis Type="Italic">p</Emphasis>-toluenesulfonate) in Liquid Mixtures of Water and Ethanol from 288.15 to 333.15 K”

Mathematical representations reported by Yu et al. for the CNIBS/R–K model and a hybrid model are carefully examined in regards to the model’s ability to predict the solubility of hexaquocobalt(II) bis(p-toluenesulfonate). The equation coefficients reported by Yu et al. were found to give calculated mole fraction solubilities in ethanol that exceed unity for both models.     

Synthesis,spectral, DFT calculations and antibacterial studies of Fe(III) complexes of new fluorescent Schiff bases derived from imidazo[4',5':3,4]benzo[1,2‐c]isoxazole

New fluorescent heterocyclic ligands were synthesized by the reaction of 8‐(4‐chlorophenyl)‐3‐alkyl‐3H‐imidazo[4',5':3,4]benzo [1,2‐c]isoxazol‐5‐amine with p‐hydroxybenzaldehyde and p‐chlorobenzaldehyde in good yields. The coordination ability of the ligands with Fe³⁺ ion was examined in an aqueous metanolic solution. Schiff base ligands and their metal complexes were characterized by elemental analyses, IR, UV–vis, mass, and NMR spectra. The optical properties of the compounds were investigated and the results showed that the fluorescence of all compounds is intense and their obtained emission quantum yields are around 0.15 – 0.53. Optimized geometries and assignment of the IR bands and NMR chemical shifts of the new complexes were also computed by using density functional theory (DFT) methods. The DFT‐calculated vibrational wavenumbers and NMR chemical shifts are in good agreement with the experimental values, confirming suitability of the optimized geometries for Fe(III) complexes. Also, the 3D‐distribution map for HOMO and LUMO of the compounds were obtained. The new compounds showed potent antibacterial activity and their antibacterial activity (MIC) against Gram‐positive and Gram‐negative bacterial species were also determined. Results of antibacterial test revealed that coordination of ligands to Fe(III) leads to improvement in the antibacterial activity.     

Solubility Data of Diazepam in Binary and Ternary Mixtures of PEGs 200 and 400 with N-Methyl Pyrrolidone and Water at 298.2 K: Experimental Data and Modeling

Experimental solubilities of diazepam in binary and ternary solvents of polyethylene glycols 200 and 400 with N-methyl pyrrolidone and water at T = 298.2 K are reported. The Jouyban–Acree model was used to fit solubility data of diazepam in the binary and ternary solvent mixtures (106 data points) in which the overall mean relative deviations (OMRD %) is 13.1 % and the prediction OMRD % is 31.7 %. The combined version of the Jouyban–Acree model with Hansen solubility parameters was used for fitting and predicting the solubility data and the OMRDs % are 10.0 and 20.8 %, respectively. Also, the previously proposed trained versions of the Jouyban–Acree model were used for predicting the reported data in this work and all results are listed in the tables. The density of the solute-free solvent mixtures were measured and employed to calculate the constants of the Jouyban–Acree model and then the densities of the saturated solutions were predicted.     

Pyrido[1',2':1,5]pyrazolo[4,3-b]quinolines as New Fluorescent Heterocyclic Systems for Dye-Sensitized Solar Cells

Russian Journal of General Chemistry - New fluorescent heterocyclic compounds pyrido[1',2':1,5]pyrazolo[4,3-b]quinolines have been synthesized by the reaction of...     

Determination of phenytoin in exhaled breath condensate using electromembrane extraction followed by capillary electrophoresis

Application of hollow fiber-based electromembrane extraction was studied for extraction and quantification of phenytoin from exhaled breath condensate (EBC). Phenytoin is extracted from EBC through a supported liquid membrane consisting of 1-octanol impregnated in the walls of a hollow fiber, and into an alkaline aqueous acceptor solution inside the lumen of the fiber. Under the obtained conditions of electromembrane extraction, that is, the extraction time of 15 min, stirring speed of 750 rpm, donor phase pH at 11.0, acceptor pH at 13.0, and an applied voltage of 15 V across the supported liquid membrane, an enrichment factor of 102-fold correspond to extraction percent of 25.5% was achieved. Good linearity was obtained over the concentration range of 0.001–0.10 µg/mL (r² = 0.9992). Limits of detection and quantitation were 0.001 and 0.003 µg/mL, respectively. The proposed method was successfully applied to determine phenytoin from EBC samples of patients receiving the drug. No interfering peaks were detected that indicating excellent selectivity of the method. The intra- and interday precisions (RSDs) were less than 14%.     

Carbon-Based Solid Acid as An Efficient and Reusable Catalyst for One-Pot Synthesis of Tetrasubstituted Imidazoles under Solvent-Free Conditions

Carbon‐based solid acid catalyst was found to be highly efficient, eco‐friendly and recyclable heterogeneous catalyst for the multicomponent reaction of benzil, aromatic aldehyde, primary amine and ammonium acetate, giving rise to 1,2,4,5‐tetrasubstituted imidazoles in good to excellent yields. The present methodology offers several advantages, such as high yields, short reaction time, mild reaction condition and a recyclable catalyst with a very easy work up.