有关光电倍加管中的几个问题

本文简要叙述了射线的探测技术对光电倍加管的各种要求,以及管子的基本参数与应用的关系,综合了近年来文献中与此有关的光阴极、二次极和结构方面的工作情况。在阴极方面介绍了锑-铯、锑-钾-钠-铯光阴极和新的反射式锑-铯光阴极。在二次极方面介绍了锑-铯二次极和银-镁、铝-镁合金二次极等。在结构方面介绍了光阴极到第一个二次极区域的电子光学输入部分的结构和二次发射倍增系统的结构。本文还初步讨论了光阴极、二次极及管型结构方面的若干改进意见。     

脉冲电场下两种电极材料表面电子发射阈值特性的实验研究

研究了金属表面电子发射阈值的测量原理.以待测材料为阴极,以法拉第筒作为阳极收集电子.在"晨光号"加速器上,测量了不同粗糙度的304L不锈钢和铝表面电子发射阈值及经表面涂覆工艺处理后这两种电极材料表面电子发射阈值.研究发现:电极表面磨光可以抑制电子发射,随着粗糙度的增加,电子发射阈值降低;金属表面涂覆对抑制电子发射效果更为显著,电子发射阈值增加了一倍.     

RF腔光阴极注入器中热发射度的测量研究

论文介绍RF腔光阴极注入器中热发射度的测量方法，在注入器中有三个因素影响热发射度的测量，它们是：射频场效应、空间电荷效应和发射度测量误差. 在注入器出口处，电子束发射度由：热发射度、射频场效应引起的发射度增长和空间电荷效应的发射度增长三部分组成. 论文从注入器中发射度增长理论和模拟出发，给出了一个能够消除射频场效应和空间电荷效应的热发射度测量方法.     

光阴极直流高压电子枪束流偏轴发射研究

离子反轰会造成直流高压电子枪内光阴极的量子效率衰减,降低阴极的工作寿命和稳定性,是限制光阴极直流高压电子枪性能的重要因素之一。基于中国工程物理研究院太赫兹自由电子激光(THzFEL)的直流高压电子枪,通过束流动力学模拟和阴极量子效率测量,研究了束流偏轴发射对离子反轰的抑制作用及其应用限制。模拟结果表明:束流偏轴发射时,离子主要轰击阴极的电中心附近,光电发射区域的离子通量较轴上发射时降低约95%;但束流发射度增大约4πmm·mrad,横向运动幅度增加约1倍。通过电子枪运行前后阴极量子效率测量,发现束流偏轴发射时离子反轰引起电中心附近量子效率大面积的衰减,而光电发射区域量子效率损失较小,验证了束流偏轴发射抑制离子反轰的可行性。     

新型注铯镁金属光阴极的实验研究

报道了用于激光驱动高亮度注入器的新型光阴极的实验研究.用铯离子注入的方法得到了在镁基底上的掺铯合金光阴极,研究了注入、溅射及光电发射的机制和参数.用此阴极得到了比纯金属镁阴极高约一个量级的量子效率和绿光下的单光子发射效应,为用于强流短脉冲电子束的光阴极研究提供了新的途径. 关键词：     

X光二极管阴极灵敏度标定

 在北京正负电子对撞机同步辐射装置3W1B光束线上标定了一批X光二极管的灵敏度。应用一个简单的模型描述真空X光二极管光阴极发射光电子的机制。同时，阴极表面光洁度、氧和碳沾污可以解释金属光阴极的实际灵敏度曲线与模型预测的偏离。     

光发射模块的实现及直线感应加速器注入器的模拟

本文研究开发直线感应加速器的光发射模块,并验证该模块的正确性.首先建立光发射模型,该模型确立阴极参数和入射激光与宏粒子初始值间的关系,并将该模型实现到代码中;其次,根据实验参数建立注入器模型,模拟光阴极的发射过程;最后,将模拟结果与实验结果比较,发现模拟的发射电流与实验电流吻合,发射度与理论分析一致,验证了模拟的正确性.     

高真空热电子发射实验研究

在真空环境下,研究了阳极电压和阴极电压对金属热发射电流强弱的影响。实验结果表明,提高阳极电压和阴极电压有利于电子从阴极逸出,使发射电流得到增强,此外,提高阳极电压能够降低阴极临界电压,增大发射电流,为提高热电子发射效率提供了实验基础和理论依据。     

单晶LaB6热阴极直流发射特性实验研究

 实验利用二极管型电子枪研究了单晶LaB₆热阴极的直流发射特性。阴阳极间距5 mm,从直径为2 mm发射体上测得175 mA直流束流（阴极温度约为1 870 K、阴阳极电压6.5 kV、空间电荷限制状态）,电流密度为5.57 A/cm2。采用Longo方程拟合直流发射电流,该方法比以往单纯用Child或Richardson- Dushman公式更符合实际。实验还观测了阴极工作环境和表面状态对直流发射的影响,当真空度低于7×10^-4 Pa时,阴极发射能力逐渐下降,阴极表面碳、氧污染使发射体功函数升高。长时间加热后,石墨上会蒸镀LaB6,由此会造成热子电阻的下降。分析表明La原子补充不及时和表面气体吸附是影响直流发射能力的主要因素。     

深紫外激光光发射与热发射电子显微镜在热扩散阴极研究中的应用

对热扩散阴极表面微区发射状态进行原位观察和分析一直是热阴极研究的重要课题.本文着重介绍深紫外激光光发射电子/热发射电子显微镜的基本原理及其在热扩散阴极研究中的典型实例.系统配备了高温激活所用的加热装置,样品可被加热至1400℃.系统具有光发射电子、阴极热发射电子、光发射电子和阴极热发射电子联合三种电子成像模式.应用表明,对于热扩散阴极而言,深紫外激光光发射电子像适于呈现阴极表面的微观结构形貌;热发射电子像适于反映阴极表面的本征热电子发射及均匀性;光电子和热电子联合成像适于对阴极表面的有效发射点做出精确定位.     

Guided-Wave Two-Dimensional Acousto-Optic Scanner Using Proton-Exchanged Lithium Niobate Waveguide

Two-dimensional scanning of a 0.6328 mum guided-light beam has been realized using noncolinear acousto-optic (AO) coplanar Bragg diffraction together with colinear AO guided-mode to substrate radiation-mode conversion in a Z-cut Xpropagation LiNbO3 proton-exchanged (PE) waveguide. The two surface acoustic (SAW) waves utilized are at the center frequencies of 500 and 200 MHz, propagating in the Y and X axes, respectively. Two-dimensional scanning of approximately 720 resolvable light beam spots, namely, 18 40 (horizontal vertical) scanning, has been demonstrated using a light beam of 1.0 mm aperture. The total number of resolvable beam spots can be greatly increased from 720 by simply utilizing SAW transducers of larger bandwidth and a light beam of greater aperture. It should also be possible to significantly increase the diffraction efficiency from 3 % by optimizing the parameters of the PE waveguide and the SAWs.     

Femtosecond Transform-Limited Pulse Generation by Compensating for the Linear Chirp of SPM Spectra in Dispersion Shifted Fibers

A simple technique of pulse compression, based on the linear chirp compensation of self-phase modulation (SPM) spectra in dispersion shifted fibers, is demonstrated. The optimization procedure is carried out, for a short span of a single-mode fiber, using a parabolic law, which describes the behavior of the squared output pulse width versus the pump peak power in the case of Gaussian pulses. The experimental results give a minimum pulse duration of 233 fs, which is in good agreement with the model. Shorter and coherent pulses, down to 90 fs, have been obtained by inserting an interference filter at the optical output.     

Effect ofγ-radiation on the spectral luminescence characteristics of impure cadmium tungstate crystals

Results of a study of the effect of γ-radiation on the spectral luminescence properties of cadmium tungstate crystals doped with silver, bismuth, and molybdenum cations are presented. Spectral characteristics of the nondnnnoped crystals are briefly described. Absorption and photo and X-ray luminescence spectra of the crystals taken before and after exposure to γ-radiation (5.5·10⁴ Gy) are compared. It is found that the spectral characteristics of the crystals doped with silver, bismuth, and molybdenum cations do not change markedly after the exposure. The relation between the type of impurity-induced defects, individual characteristics of the impurity cations, and the character of the effect of γ-radiation on the spectral luminescence properties of impure crystals is analyzed (preliminarily). Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 64, No. 1, pp. 55–60, January–February, 1997.     

Theoretical analysis and simulation of conjugate heights for dual-conjugate AO system in lidar

A multi-conjugate adaptive optics （MCAO） can offer a possibility of widening field of view （FOV） characterized by the isoplanatic angle, and the choose of conjugate height becomes a basic problem for MCAO, which influences the size of iosplanatic angle. Considering the application of lidar, the isoplanatic angle＇s expressions of two deformable mirrors （DMs） MCAO for uplink and downlink are deduced. The effects of conjugate heights for dual-conjugate AO are thoughtfully discussed, and the isoplanatic angles are further analyzed. The results show that the isopanatic angle varies with the conjugate height and reaches the maximum as the conjugate height is at the optimal altitude. Moreover, the optimal conjugate height changes with the propagation distance.     

Quick single-photon detector with many avalanche photo diodes working on the time division

Due to the limit of response speed of the present single-photon detector, the code rate is still too low to come into practical use for the present quantum key distribution (QKD) system.A new idea is put up to design a quick single-photon detector.This quick single-photon detector is composed of a multi-port optic-fiber splitter and many avalanche photo diodes (APDs).Au of the ports with APDs work on the time division and cooperate with a logic discriminating and deciding unit driven by the clock signal.The operation frequency lies on the number N of ports, and can reach N times of the conventional single-photon detector.The single-photon prompt detection can come true for high repetition-rate pulses.The applying of this detector will largely raise the code rate of the QKD, and boost the commercial use.     

Sorting of bending magnets for the SSRF booster

The Shanghai Synchrotron Radiation Facility(SSRF)booster ring,a full energy injector for the storage ring,is deigned to accelerate the electron beam energy from 150MeV to 3.5GeV that demands high extraction efficiency at the extraction energy with low beam loss rate when electrons are ramping.Closed orbit distortion(COD)caused by bending magnet field uniformity errors which affects the machine performance harmfully could be effectively reduced by bending magnet location sorting.Considering the affections of random errors in measurement,both ideal sorting and realistic sorting are studied based on measured bending magnet field uniformity errors and one reasonable combination of bending magnets which can reduce the horizontal COD by a factor of 5is given as the final installation sequence of the booster bending magnets in this paper.     

Improvement of four-wave mixing-based wavelength conversion efficiency in dispersion shifted fiber by 40-GHz clock pumping

40-GHz clock modulated signal as a pump to improve the efficiency of four-wave mixing (FWM)-based wavelength conversion in a 26.5-km dispersion shifted fiber (DSF) is investigated. The experimental results demonstrate that the conjugated FWM component has higher intensity with the clock pumping than that with the continuous-wave (CW) light pumping. The improvement of FWM-based wavelength conversion efficiency is negligible when the pump power is less than Brillouin threshold. But when the pump power is greater than Brillouin threshold, the improvement becomes significant and increases with the increment of pump power. The improvement can increase up to 9 dB if pump power reaches 17 dBm.     

Characterization of PolyA and PolyC mismatches by Raman spectroscopy

A.C mismatches are studied by Raman spectral characterization of PolyA, PolyC, and their equimolar complex in solution of 0.14 mol/L Na ,pH7.0.Experimental results show that A·C mismatches occur to be A/B (mainly A) conformers, and unlike Watson-Crick base pairing, this kind of mismatches is stabilized by only one hydrogen bond involving cytosine N4H2 and adenine N7.The formation of A·C complex makes the base stacking interactions much stronger, and conformation of the backbone more ordered, which leads to obvious Raman hypochromic effect with some shifts in corresponding bands.