低苯乙烯含量的丁二烯-苯乙烯共聚物的激基缔合物荧光研究

本文报导一种低苯乙烯含量(5％,Wt.)的丁二烯-苯乙烯共聚物,经~1H NMR证明其分子链上不存在相邻苯乙烯单元。荧光光谱结果表明,它在良溶剂(二氯乙烷)的稀溶液状态下只呈现单分子荧光。从良溶剂-θ溶剂(二氯乙烷-甲醇体系)及稀溶液-浓溶液-固体之荧光光谱的变化,证明形成了链内非近邻生色团之间和链间生色团之间的激基缔合物(Excimer)。从固体与θ溶剂的激基缔合物荧光的比较,还可区分链内非近邻和链间苯环形成激基缔合物对荧光强度的贡献。这一结果对阐明高分子链内非近邻和链间激基缔合作用提供了新的证据,并有助于了解高聚物本体中相互穿透、相互缠结的无规线团的形态。     

聚乙烯醇水溶液反复冷冻过程中的溶剂化效应

采用示差扫描量热技术(DSC)对聚乙烯醇(PVA)水溶液反复冰冻过程中的溶剂化效应进行研究.引入水化数的概念来表征溶剂化效应的大小.结果表明不同浓度区间的PVA水溶液其在反复冰冻过程中溶剂化效应显著不同,主要归因于高分子链分子内和分子间缠结程度对溶剂分子"参与"溶剂化的程度和方式的不同.作者把极稀高分子溶液的研究结果拓展到高分子稀溶液或亚浓溶液区间,阐述了高分子溶液中高分子链的物理图像.冷冻次数的增加导致链间缠结增加,部分溶剂则被包裹在由链间缠结点所形成的网圈内成为分子链的一部分.溶液溶剂化程度的变化受到包裹溶剂与高分子链脱溶剂化的综合影响.     

高分子在溶液中的链叠加度

从高分子线团密度存在浓度依赖性角度出发,导出了从稀溶液至浓溶液范围内高分子链叠加度与浓度的定量关系式.以链叠加度为高分子溶液的结构参数,关联了文献中6种分子量的聚氯丁二烯在不同溶剂和温度条件下溶液相对黏度的变化.这表明,高分子溶液的宏观性质与溶液中高分子链叠加度这一微观结构参数密切相关.     

溶致凝聚过程中分子链构象的演变

详细讨论了稀溶液、亚浓溶液、浓溶液和极浓溶液中分子链构象的演变,考察了在溶致凝聚过程中分子链的链间相互作用、关联作用和分子链尺寸的变化规律,给出了排除体积的严格定义,引入热关联效应、长程关联效应和全高斯链浓度等概念。指出在不同浓度溶液中,分子链在不同尺度上构象状态不同;在从孤立单链态(良溶液中)向多链聚集态的溶致凝聚过程中,单链的尺寸一直在收缩,由Flory尺寸RF缩小至无扰尺寸R0。这是大分子凝聚过程的一个特点。     

Transitions of Chain＇s Conformation in the Lytropic Condensation of Macromolecules

详细讨论了稀溶液、亚浓溶液、浓溶液和极浓溶液中分子链构象的演变，考察了在溶致凝聚过程中分子链的链间相互作用、关联作用和分子链尺寸的变化规律，给出了排除体积的严格定义，引入热关联效应、长程关联效应和全高斯链浓度等概念。指出在不同浓度溶液中，分子链在不同尺度上构象状态不同；在从孤立单链态（良溶液中）向多链聚集态的溶致凝聚过程中，单链的尺寸一直在收缩，由Flory尺寸RF缩小至无扰尺寸Ro。这是大分子凝聚过程的一个特点。     

溶液中尼龙11的NMR弛豫研究

用 2DNMR(HMQC)技术归属了溶液中尼龙 11分子的主要1H和13 C NMR共振信号 ,并通过变温和变浓度 1H NMR弛豫时间的测定 ,得到了尼龙 11溶液中氢键结构变化的动力学信息 .结果表明 ,溶液中尼龙 11分子的弛豫行为与一般高聚物不同 ,随着温度升高 ,尼龙链间相互作用逐渐减弱 ,尼龙分子与溶剂小分子间相互作用逐渐增强 ,尼龙链间氢键逐渐离解 ,而离解出来的自由NH和CO基团又与溶剂小分子间生成氢键 .尼龙 11链卷曲堆积成无规线团状 ,一部分溶剂被包裹在内部并和α CO质子成为一个整体而一起运动 .变浓度实验弛豫过程呈现双指数特性 ,快弛豫部分随体系浓度增加而增多 ,表明聚合物溶液中凝聚缠结含量的增大 ,这种凝聚缠结是由溶液中氢键引起分子链物理交联成网而形成的 .随着浓度增加 ,溶液逐渐变成局部粘度较大的类似软固体     

大分子溶致凝聚过程中的几个分界浓度

按照现代高分子凝聚态物理学观点,高分子溶液按浓度分为:极稀溶液、稀溶液、亚浓溶液、浓溶液、极浓溶液5个层次,各层次间的分界浓度分别称为动态接触浓度、接触浓度、缠结浓度和全高斯链浓度,其中全高斯链浓度由本文作者命名。文中给出各分界浓度的定义,介绍各分界浓度的物理意义,特别说明命名全高斯链浓度的依据。同时详细讨论了不同浓度溶液中大分子链的构象及其变化、链间相互作用的本质和微观图像、以及溶液浓度变化对溶液性质的影响。     

用分子间激基缔合物荧光研究聚苯乙烯良溶剂溶液——从稀区到亚浓区和浓区的转变

本文以分子间的激基缔合物荧光为探针,研究了线型聚苯乙烯-二氯乙烷溶液由稀溶液区到亚浓溶液区和浓溶液区的转交。由六个M_w=9.5·10~3-6.09·10~6单分散试样的激基缔合物荧光与单生色团荧光强度比值的浓度依赖性得到C_s∝M_W~(-0.10)和C~ 无分子量依赖性的结果。C_s是溶液中高分子线团尺寸由于邻近线团的存在而开始收缩的浓度,C~ 是溶液中高分子链段空间密度分布达到连续而大致均匀时的浓度。提出动态接触浓度C_s作为稀溶液与亚浓溶液的界限,C~ 作为亚浓溶液与浓溶液的界限。测定了聚苯乙烯-二氯乙烷溶液的[η]-M关系:[η]_(DCE)~(25℃)=1.545·10~(-2)M~(0.685)毫升/克。     

大分子链的溶致凝聚过程

研究大分子链的凝聚从溶液考虑比较合适。溶液从稀溶液向亚浓、浓溶液的转变过程,本质上就是分子链从孤立单链状态向多链穿透、关联、缠结、凝聚的过程,称其为溶致凝聚过程。分子链溶致凝聚的类型十分丰富,包括凝聚成无定形态、结晶态和溶胶-凝胶转变等,讨论了这些过程中分子链溶致凝聚的特点。简要介绍了分子链凝聚过程涉及的基本物理问题:多体问题、复杂关联效应、平均场近似、临界指数,以及研究溶致凝聚的重要方法——标度律方法。     

荧光光谱法研究聚苯乙烯在良溶剂中的链构象变化

本文用分子内无辐射能量转移荧光光谱法研究了聚苯乙烯在良溶剂二氯乙烷和十氢萘中从极稀溶液到亚浓溶液的链构象转变.对比了无辐射能量转移荧光光谱法和聚苯乙烯激基缔合物荧光光谱法在研究聚苯乙烯溶液中的检测灵敏度差别,发现无辐射能量转移荧光光谱法在研究高分子链的构象转变方面,较激基缔合物荧光光谱法表现出更高的灵敏度和分辨率.无辐射能量转移荧光光谱法研究表明,当聚苯乙烯溶液浓度低于临界交叠浓度(C~*)时,随着浓度的增加,链的构象无明显变化,在C~*之下不存在所谓的动态接触浓度;当溶液浓度逐步提高,在预期的C~*区域内,荧光强度出现了明显的转折点,该值与理论推算的C~*数值一致;而且当浓度进一步增加时,在C~*以上,高分子链发生了显著的塌缩行为.研究表明,分子内无辐射能量转移荧光光谱法可以灵敏地检测C~*,而且C~*可以作为划分高分子链在溶液中构象转变的临界点.     

Studies on the Condensed Structure of Vacuum Cast Atactic Polystyrene Films

IntroductionIn de Gennes' scaling theoryL'], polymer solutions are divided into dilute, semidilute andconcentrated regimes corresponding respectively to separated chains, overlapping and interpenetrating chains, and fully entangled chains -- a dynamic network structure[2]. Particularly, the critical overlap concentration c' is introduced as a boundary concentration to separate the semidilute solution from the dilute one, where the polymer coils in the solution beginto be in contact with each o…     

Non-equilibrium self-assembled structures in thick PS-b-PMMA copolymer films

Phenomena associated with the order-disorder transition (ODT) of block copolymers have been studied by optical light microscopy, SAXS, SEM, TEM and DSC. Observations have been made on almost symmetric polystyrene-block-poly(methyl methacrylate) samples of three molecular weights and their mixture. We observed non-equilibrium supermolecular structures several microns in diameter in the bulk of thick PS-b-PMMA films (ca. 100 μm thickness) prepared by vacuum drying of films cast from a non-selective solvent (after a short-term annealing above the T_g). Apparent LDOT (lower disorder-to-order transition) behaviour is observed for samples with non-equilibrium morphology surviving from solution as deduced from SAXS 1/I_m vs 1/T and the full width at half-maximum vs 1/T plots.The measurements point to complex behaviour near the ODT, but homogenization of samples upon long-term annealing well above the T_g temperature call into existence common stacks of lamellae observable in SEM images of microphase-separated samples. This verifies the opinion that the observed apparent LDOT behaviour of samples II, III and II + III is associated with the frozen non-equilibrium morphology surviving from solution. This is confirmed by SAXS measurement on a homogenized sample displaying the expected UDOT behaviour. It has been demonstrated that self-assembled structures prepared by vacuum drying of films cast from a non-selective solvent are non-equilibrium structures and their successive ordering is difficult due to a relative narrow temperature interval between T_g and degradation temperature. The conditions under which BCP films are prepared thus have a pronounced effect on the microstructure and microphase ordering process.     

明胶水凝胶电刺激响应行为的研究

制备了戊二醛交联的明胶水凝胶 ,并研究了其吸水率、力学性能和电刺激响应行为 .结果表明 ,在NaCl溶液中 ,明胶水凝胶的平衡溶胀比随NaCl溶液的浓度增大而减小 ,经 0 0 1mol LNaCl溶液充分溶胀的明胶水凝胶膜其弹性模量为 4.2 9kPa ,抗张强度为 5 11kPa ,断裂伸长率为 110 %.在NaCl溶液中于非接触的直流电场作用下 ,明胶水凝胶向电场负极弯曲 ,凝胶的弯曲速度和弯曲偏转程度随外加电场的增大而增大 ,随NaCl溶液离子强度的增大出现临界最大值 .在周期性电场作用下 ,其弯曲响应行为具有良好的可逆性 .通过聚电解质凝胶弯曲理论初步解释了其弯曲机理 .     

Fluorescence quenching method for determination of trace tungsten in environmental samples with dibromohydroxyphenylfluorone

A highly sensitive and selective fluorescence quenching method has been developed for the determination of trace tungsten in environmental samples using dibromohydroxyphenylfluorone (DBHPF) as an emission reagent. In the presence of 0.04?mol/L of sulphuric acid and acetyltrimethylammonium bromide, tungsten(VI) reacts with DBHPF to form a 1?:?3 red complex within 5.0?min. In order for the DBHPF–tungsten(VI) complex to form, the fluorescence intensity of the reagent solution was quenched linearly by adding 0.1 to 1.0?µg of tungsten(VI) in 25?mL of solution. This was measured at 528?nm with excitation at 495?nm. In this work, a standard addition method was investigated and used for sample analysis. The decrease in fluorescence intensity of the reagent solution (ΔF) was linear for 0?～?0.9?µg of tungsten(VI) in 25?mL of solution, and the detection limit (3?s) of the standard addition method was found to be 0.012?ng/mL of tungsten(VI). The effects of various metal and nonmetal ions were studied in detail. The experiments clearly showed that most foreign ions can be tolerated in considerable amounts; in particular, 50-fold Mo(VI), V(V), Zr(VI) and Ti(IV) do not interfere, and the selectivity of the proposed method is better than other previously described methods. Moreover, the method proposed here is very stable and simple, the fluorescence intensity of the solution can remain almost unchanged for 2.0?h at room temperature, and the method has been used successfully to determine tungsten in environmental samples.     

Chemiluminescence Flow Injection Analysis of Menadione Sodium Bisulfite Based on Luminol Reaction

ABSTRACT

A chemiluminescence(CL) flow system is described for the determination of menadione sodium bisulfite based on its repression on the chemiluminescence(CL) emission produced upon mixing a hexacyanoferrate(III) solution with an alkaline luminol solution in the absence of co-oxidizer. The system responds linearly to menadione sodium bisulfite concentration in the range 0-1 μg/mL with a detection limit (3σ) of 0.01 μg/mL. Relative standard deviation (RSD) of 0.16% for 0.4 μg/mL menadione sodium bisulfite (n=11). The system has been successfully applied to the determination of menadione sodium bisulfite in tablets and injections.     

Determination of low atomic number elements at trace levels in uranium matrix using vacuum chamber total reflection X-ray fluorescence

Determinations of low atomic number elements Na, Mg and Al present at trace concentrations in uranium matrix were made by vacuum chamber total reflection X-ray fluorescence spectrometer for the first time. For this purpose, synthetic samples of uranium with known amounts of these low atomic number elements were prepared by mixing different volumes of their solutions with U solution of high purity. The concentrations of these elements in the samples were in the range of 100–300 μg/g with respect to uranium and 10–20 μg/mL in the solutions. Major matrix uranium was separated by solvent extraction with 30% solution of tri-n-butyl phosphate in dodecane. After the solvent extraction, aqueous phase containing trace elements was mixed with Sc internal standard and the samples were analyzed by vacuum chamber total reflection X-ray fluorescence spectrometer having a Cr Kα excitation source. The total reflection X-ray fluorescence results obtained, after blank corrections, indicated an average deviation of 14% from the calculated concentrations of these low atomic number elements on the basis of their preparation. However, the total reflection X-ray fluorescence determined concentration of Mg was exceptionally lower than the calculated concentration in two samples. These studies have shown that vacuum chamber total reflection X-ray fluorescence is a promising technique for the determination of low atomic number elements in uranium matrix after its separation.     

新催化动力学光度法测定痕量铑

在ＰＨ５．１的ＨＡｃ－ＮａＡｃ介质中,铑（Ⅲ）催化高碘酸钾氧化偶氮胂Ⅲ褪色,据此建立了一个以偶氮胂Ⅲ褪色反应为基础的新催化动力学测定铑的方法。     

Mechanical behavior and tensile fractography of compatible vinylchloride–vinylacetate–maleic acid terpolymer and nitrocellulose blends

Vinylchloride–vinylacetate–maleic acid terpolymer (VMCH) and nitrocellulose (NC) were blended at 10% (W/V) concentration is cyclohexanone at different weight fractions. Compatible blends were obtained at all weight fractions. This paper reports the mechanical behavior of solvent cast blend films of VMCH and NC. The films were prepared by solution blending and subsequent casting on a mercury surface. Depending on the composition, the tensile behavior ranged from brittle to ductile. The effect of the blend ratio on the properties shows that within the Hookeian region the modulus and strength have a positive deviation from linearity, whereas the elongation has a negative deviation. The effect of the blend ratio on the ultimate properties of the materials shows a positive deviation in strength up to 63 wt% VMCH composition and a negative deviation in elongation and toughness. The tensile fractography of the pure VMCH and VMCH/NC blends shows the presence of peaks, foldings of fibrils along with cavities or voids, which indicate a ductile mode of failure with craze-initiated fracture. Fractography of the pure NC Indicates a brittle mode of failure wit h craze-initiated fracturing.     

A flow injection chemiluminescence method for the determination of fluoroquinolone derivative using the reaction of luminol and hydrogen peroxide catalyzed by gold nanoparticles

Based on the enhancement of chemiluminescence (CL) of luminol-hydrogen peroxide-gold nanoparticles system by fluoroquinolones (FQs), a novel and rapid CL method is reported for the determination of FQs derivatives. Under the optimum conditions, the CL intensity is proportional to the concentration of FQs derivative in solution. The corresponding linear regression equations are established over the range of 0.08-1.28 μg/mL for norfloxacin, 0.013-1.32 μg/mL for ciprofloxacin, 0.014-1.4 μg/mL for lomefloxacin, 0.029-1.46 μg/mL for fleroxacin, 0.02-1.0 μg/mL for ofloxacin and 0.01-1.44 μg/mL for levofloxacin, respectively. The limits of detection (S/N = 3) are 3.2, 9.5, 7.0, 9.0, 8.0, and 8.0 ng/mL with the relative standard deviation (n = 11) 4.3, 1.5, 1.9, 1.3, 1.6 and 2.1% for norfloxacin, ciprofloxacin, lomefloxacin, fleroxacin, ofloxacin and levofloxacin, respectively. This proposed method has been applied to detect FQs derivatives in human urine successfully.     

Morphology and physical properties of a liquid–crystalline main-chain polymer with flexible side chains

A molecular laminate model is used to explain the properties of unoriented and oriented films of poly(p-phenylene-2,5-didodecyloxyterephthalate) cast from solution. In oriented films the two different crystal modifications, A and B, give rise to room temperature tensile moduli of 15 and 30 GPa respectively. The packing (in clusters) of the side chains in modification A, leading to a glass–like transition in the side-chain regions around ?40°C, is largely responsible for this difference. Oriented films of modification A and B have coefficients of thermal expansion of +0.3×10^?5 and ?1× 10^?5 K^?1 respectively. It is concluded that the properties of this class of polymers can be adjusted in a systematic way.