以聚乙二醇/甲醇为二元致孔剂的新型磺酸甜菜碱型两性离子亲水毛细管整体柱的合成与色谱评价

使用新型二元致孔剂聚乙二醇(PEG)/甲醇,以N,N-二甲基-N-甲基丙烯酰胺基丙基-N,N-二甲基-N-丙烷磺酸内盐(SPP)为单体,季戊四醇三丙烯酸酯(PETA)为交联剂,偶氮二异丁腈(AIBN)为引发剂,通过原位聚合法制备磺酸甜菜碱型两性离子亲水毛细管整体柱。对各反应物的配比进行了优化。结果表明,当单体与致孔剂的质量比为1∶2.5,并且致孔剂中PEG与甲醇的质量比为1∶2,单体内部SPP与PETA的质量比为1∶1,AIBN为总质量的0.1%时为最优配比;PEG/甲醇二元致孔剂的加入实现了对整体柱内部孔径大小的调节,得到了结构更为均一,渗透性、机械稳定性良好的毛细管整体柱,并且理论塔板数与传统制备方法相比有显著提高,在毛细管液相色谱模式下最高可达2.4×105塔板/m。将制备的整体柱应用于毛细管液相色谱和加压毛细管电色谱分离酚类、核苷类等极性小分子混合物,得到了很好的分离效果。     

含多面体低聚倍半硅氧烷杂化毛细管整体柱的制备及修饰

本文采用自由基聚合法原位制备了两种杂化毛细管整体柱。首先以含有一个甲基丙烯酸基团的多面体低聚倍半硅氧烷(POSS)试剂(Bu-POSS)为单体、以含有多个甲基丙烯酸基团的POSS试剂(POSS-MA)为交联剂在二元致孔剂(正丙醇/聚乙二醇400)和引发剂(偶氮二异丁腈)存在下发生热引发聚合,在毛细管中形成聚(Bu-POSS-co-POSS-MA)杂化整体柱;另外仅以POSS-MA为单体在相同条件下制备聚(POSS-MA)杂化整体柱,并将这两种杂化整体柱应用于小分子的毛细管液相色谱(cLC)分析。结果表明,含POSS杂化整体柱具有制备简单、重现性好以及稳定性高的特点。此外,利用聚(POSS-MA)杂化整体柱表面剩余的甲基丙烯酸基团,可以将功能单体(甲基丙烯酸硬脂酸酯等)化学键合到整体柱上,不但可以提高色谱柱效,而且使其具有不同的选择性。本文所发展的以POSS试剂为原料采用自由基聚合法制备杂化整体柱的方法为新型杂化整体柱的制备提供了一种新思路。     

新型亲水整体柱的制备及其在毛细管液相色谱和加压电色谱中的应用

以N,N-二甲基-N-甲基丙烯酰胺基丙基-N,N-二甲基-N-丙烷磺酸内盐(SPP)为单体,季戊四醇三丙烯酸酯(PETA)为交联剂,偶氮二异丁腈(AIBN)为引发剂及两类不同的致孔剂(乙醇/乙二醇和甲醇/1,4-丁二醇)制备了两种新型亲水性整体柱。为了获得理想的柱效、电渗流速度和渗透性,对制备整体柱的各反应物配比进行了研究和优化。比较了两种整体柱在渗透性和分离样品方面的性能,结果表明,以乙醇/乙二醇为致孔剂制备的整体柱在柱效、分离度方面优于以甲醇/1,4-丁二醇为致孔剂制备的整体柱,但在渗透性方面不及后者。探讨了流动相中盐浓度对核苷类样品保留的影响,发现当甲酸铵浓度从10 mmol/L增加到70 mmol/L时,核苷样品的保留因子呈现先增加后减小的状态。将制备的整体柱用于毛细管液相色谱和加压电色谱分别分离胺类、酚类和核苷类样品,获得了理想的分离效果。在分离酚类和核苷类混合样品时,发现加压毛细管电色谱在分离度和分离速度上均优于毛细管液相色谱。     

毛细管电色谱硅胶整体柱的制备与性能研究

以甲基丙烯酸丙酯基三甲氧基硅烷(MPTMS)为单体,甲苯为致孔剂,偶氮二异丁腈(AIBN)为引发剂,盐酸为催化剂,采用热引发法制备毛细管电色谱硅胶整体柱.在反相毛细管电色谱条件下,对中性化合物硫脲,苯,萘,芴,蒽实现了基线分离了.柱效超过100,000 plates/m.探讨了该柱的制备条件如单体比例,毛细管内径,制柱反应时间对分离的影响,并且在电色谱条件下考察了有机溶剂比例,pH值,电压和温度对分离的影响.     

阳离子交换毛细管整体柱的制备及其在毛细管离子色谱中的应用

以甲基丙烯酸缩水甘油酯(GMA)为功能单体,亚乙基二甲基丙烯酸酯(EDMA)为交联剂,偶氮二异丁腈(AIBN)为自由基引发剂,在三元致孔剂(正丙醇,1,4-丁二醇,水)的存在下,在320!m内径的弹性石英毛细管柱内制备得到带有环氧功能基团的聚合物整体柱基质;利用Na2SO3对其改性,制备得到磺酸基型阳离子交换毛细管整体柱。采用微流泵、毛细管检测池和紫外检测器构建了毛细管离子色谱系统,并对所制备的整体柱的流体力学参数、色谱性能参数进行评价;采用流速梯度洗脱的方式实现9种常见阳离子(Li+,Na+,NH4+,K+,Cs+,Mg2+,Ca2+,Sr2+,Ba2+)的分离分析;此色谱系统还可应用于牛奶中阳离子和三聚氰胺的分离检测。     

混合模式毛细管聚合物整体柱的制备及应用

混合模式毛细管整体色谱柱由于保留机理多样,具有很好的应用前景。本文以[2-（甲基丙烯酰基氧基）乙基]二甲基-（3-磺酸丙基）氢氧化铵（SPE）为单体,乙二醇二甲基丙烯酸酯（EDMA）为交联剂,偶氮二异丁腈（AIBN）为引发剂,正丙醇/1,4-丁二醇/水三元体系为致孔剂,制备了聚合物基质SPE-co-EDMA毛细管液相色谱整体柱。通过系统优化致孔剂和反应物种类和配比、引发剂的用量、反应时间和反应温度等因素,提高了整体柱的柱效、机械强度、渗透性和重复性。结果表明该毛细管整体柱在10 MPa内具有良好的机械强度,渗透性为2.17×10^-14 m²,而且批次内和批次间峰面积的重现性（RSD）分别为1.0%和4.6%。以极性和非极性的多种化合物评价了该毛细管整体柱的色谱性能,结果表明该柱在高有机相中具有亲水相互作用机理,在低有机相中具有反相作用机理,显示出混合模式分离特性。     

“一锅法”制备C18-硅胶杂化毛细管整体柱及其应用

本文发展了一种“一锅法”制备C18-硅胶杂化毛细管整体柱的方法。发展了一种“一锅法”制备有机-无机杂化毛细管整体柱的方法。首先将四甲氧基硅烷、乙烯基三甲氧基硅烷在弱酸条件下水解,然后加入有机单体(甲基丙烯酸-N,N-二甲基十八烷基溴化铵乙酯)及自由基聚合引发剂,同步原位完成硅羟基间的缩聚反应及双键间的自由基聚合反应,从而制成C18-硅胶杂化整体柱;同时用毛细管电色谱(CEC)和毛细管液相色谱(CLC)对其柱效和分离能力进行了初步评价,并将其应用到微柱液相色谱-串联质谱对牛血清白蛋白酶解液的分离分析。结果表明,该C18-硅胶杂化整体柱具有较高的柱效和较好的重现性,在分离分析复杂生物样品方面具有较大的应用前景。此外,本文所发展的方法在制备杂化整体柱的过程中不借助相应的硅烷试剂,为杂化整体柱的制备提供了一种新的思路。     

反相毛细管整体柱的制备及其在多肽混合物分离中的应用

采用甲基丙烯酸月桂酯为基础功能单体,乙二醇二甲基丙烯酸酯为交联剂,正十二醇、1,4-丁二醇及二甲基亚砜为致孔剂,在内径为75 μm的石英毛细管内制备了具有良好机械性能及化学稳定性的反相毛细管整体柱。考察了致孔剂的种类、比例以及交联剂在单体混合物中的比例对柱压和分离效果的影响;以单体15%、交联剂15%、致孔剂70%(均为质量分数)作为优化配方,在70 ℃条件下反应24 h;并对所合成的毛细管整体柱进行了电镜表征,测试了流速、柱长与柱压的关系。结果表明,毛细管整体柱的通透性良好,可通过延长柱长的方法提高分离效果。将所制备的毛细管整体柱装于纳升级高效液相色谱仪上进行牛血清白蛋白及血浆样本的胰蛋白酶酶切液的分离,获得了比较理想的分离效果。     

辛基型毛细管液相色谱整体柱的制备、表征及评价

本研究采用以甲基丙烯酸辛酯为单体,乙二醇二甲基丙烯酸酯为交联剂,偶氮二异丁腈为引发剂,正丙醇、1,4丁二醇和水三元混合物为共溶剂,制备了内径为0．53mm的毛细管整体柱材料。详细考察了单体／交联剂比例、单体混合物与致孔剂之间的比例,对所制得材料的通透性、孔径分布、粒度大小等性能的影响;应用包括扫描电镜和压汞法对其进行表征;在毛细管液相色谱(c—HPLC)操作模式进行了初步色谱评价,结果表明：所制得的整体柱具有优良的通透性能,可在高达100μL／min的流速下进行快速分离,同时在离子对模式下对3种金属离子进行了分离,取得了较理想的效果。     

牛血清白蛋白修饰毛细管整体柱的制备及组氨酸对映体分离

以甲基丙烯酸缩水甘油酯为单体, 乙二醇二甲基丙烯酸酯为交联剂, 环己醇和正十二醇混合溶液为致孔剂, 在最佳聚合条件下, 以偶氮二异丁腈为引发剂, 制备了毛细管整体柱基质, 并且研究了单体、交联剂及致孔剂对整体柱基质孔结构及渗透性的影响; 使用Epoxy方法在基质表面键合BSA, 制得BSA修饰的毛细管整体柱. 将此毛细管整体柱应用于毛细管电色谱中, 成功地分离出了组氨酸对映体, 分离度良好.     

Optimization of binary porogen solvent composition for preparation of butyl methacrylate monoliths in capillary liquid chromatography

Butyl methacrylate monolithic columns in 320 microm i.d. fused silica capillaries for reversed-phase capillary liquid chromatography were prepared by radical polymerization initiated thermally with azobisisobutyronitrile (AIBN). Polymerization mixture contained butyl methacrylate (BMA) as the function monomer and ethylene dimethacrylate (EDMA) as the crosslinking agent with 1,4-butanediol and 1-propanol as a binary porogen solvent. Ratio of 1,4-butanediol to 1-propanol in the porogen solvent was optimized regarding the monolithic column efficiency and performance. Total porosity, column permeability, separation impedance, Walters hydrophobicity index, retention factors, peak asymmetry factors, height equivalents to a theoretical plate and peak resolutions were used for characterization of the prepared monolithic columns. The polymerization mixture consisting of 17.8% of BMA, 21.8% of EDMA, 18.0% of 1,4-butanediol, 42.0% of 1-propanol and 0.4% AIBN generated monolithic columns of the best performance having a sufficient permeability and the lowest separation impedance. It was also demonstrated that monolithic columns of this composition exhibited good preparation reproducibility and an excellent pressure resistance when applied in capillary liquid chromatography.     

Preparation of high efficiency and highly retentive monolithic silica capillary columns for reversed-phase chromatography by chemical modification by polymerization of octadecyl methacrylate

High efficiency and highly retentive monolithic silica capillary columns were obtained by polymerization of octadecyl methacrylate using alpha,alpha'-azobis-isobutyronitrile (AIBN) as a free radical initiator. Hybrid type monolithic silica columns (25 cm total length x 200 microm I.D.) prepared from a mixture of tetramethoxysilane and methyltrimethoxysilane were used as a support. The effects of the monomer and the radical initiator concentrations in the reaction mixture were examined. The performance of the columns was tested in terms of column efficiency and retention behavior by using alkylbenzenes and a few other compounds as solutes and compared with that of hybrid monolithic silica columns modified with octadecylsilyl-(N,N-diethylamino)silane (ODS-DEA). Highly retentive monolithic silica columns were obtained by polymerization at high monomer concentrations. Although a decrease in column efficiency was observed with the increase in the monomer concentration in a feed mixture, an improvement in efficiency was achieved (a plate height value lower than 10 microm) by increasing an initiator concentration without significant variations in column retention properties. Results obtained by polymerization using other monomers are also presented to demonstrate the applicability of the preparation method.     

Methacrylate monolithic columns for capillary liquid chromatography polymerized using ammonium peroxodisulfate as initiator

Four methacrylate ester‐based monolithic columns for capillary liquid chromatography (CLC) were prepared by radical polymerization with ammonium peroxodisulfate (3 columns) and by thermal initiation (1 column). The polymerization mixture consisted of butyl methacrylate (BMA) and ethylene glycol dimethacrylate (EDMA), propan‐1‐ol, butane‐1,4‐diol, water, and ammonium peroxodisulfate as initiator. It was necessary to add N,N,N′,N ′‐tetramethylethylenediamine (TEMED) to the polymerization mixture to activate the reaction. The amount of initiator and activator was optimized to attain quantitative polymerization. The reproducibility of three columns prepared at ambient temperature was studied. The most efficient column with HETP of 29 μm for uracil was compared to the monolithic column prepared by thermal initiation with α,α′‐azobisisobutyronitrile (AIBN). The efficiencies of all the test columns were characterized by van Deemter curves. Their total porosities were calculated from the retention time of uracil. Walters indices of hydrophobicity (HI) were calculated from the retention factors of anthracene and benzene. The columns prepared by both methods are comparable in their selectivities and efficiencies. They show the same characteristics because their total porosities and Walters indices of hydrophobicity are consistent. However, the preparation of monoliths using ammonium peroxodisulfate was less demanding, because polymerization was possible at ambient temperature.     

一种聚甲基丙烯酸酯类亲水作用毛细管电色谱整体柱的制备与评价

以2-羟基乙基甲基丙烯酸酯(HEMA)为单体,乙二醇二甲基丙烯酸酯(EDMA)为交联剂,制备了亲水分离模式的聚HEMA-co-EDMA新型毛细管电色谱(CEC)整体柱。考察了整体柱的结构特征及其CEC性能,研究了极性物质的保留行为,并对其可能的保留机理进行了探讨。所制备的整体柱稳定性好,固定相表面带有极性羟基功能团,不仅能提供亲水相互作用位点,且能吸附流动相中的阴离子产生阳极电渗流(EOF)。在流动相中乙腈含量较高(＞62%,体积分数)的条件下,整体柱表现出典型的亲水作用,实现了对核苷、碱基和苯胺类带有碱性的强极性化合物的高效分离,并成功分离了苯酚类、苯甲酸类等中性或酸性的极性化合物。     

胃蛋白酶亲和有机聚合物毛细管整体柱的制备及性能考察

以热引发原位聚合方法制备了聚（甲基丙烯酸缩水甘油酯（glycidyl methacrylate,GMA）-乙二醇二甲基丙烯酸酯（ethyleneglycol dimethacrylate,EDMA））毛细管整体柱,对整体柱的性能进行了表征。结果表明,柱内部结构均匀、渗透性好;整体柱能够实现苯等中性小分子化合物的分离,具有反相色谱特征,重现性和稳定性良好。利用整体柱环氧基团的活性,采用间接法,以戊二醛为连接臂制备胃蛋白酶亲和手性整体柱。在毛细管电色谱模式下进行了柱分离性能研究,并对缓冲液pH值和运行电压等分离条件进行了考察。结果表明,亲和整体柱对4种碱性手性药物（奈福泮、氨氯地平、西酞普兰、扑尔敏）有拆分效果,奈福泮、氨氯地平、西酞普兰能达到基线分离。本文为蛋白质亲和毛细管电色谱整体柱的制备和应用提供了新的思路和方法。