均三嗪含氮取代基衍生物的结构和性质

在B3LYP/aug-cc-pvDZ理论水平上研究了—CN、—NO2、—NH2、—N3 、—N2H、—NHNH2、—N4H和—N4H3等含氮取代基取代均三嗪环上的氢原子生成的衍生物, 预测了它们的分子构型、分解能及含能性质. 对衍生物分解能的研究结果表明, —CN 和—NH2取代的衍生物的分解能比未取代时更高, 而其余基团的取代使分解能降低; 取代基化合物的生成热越大, 取代均三嗪中的氢原子后生成衍生物的生成热也越大. —CN、—N3和—N4H取代的均三嗪衍生物的单位原子生成热为71.9、78.7 和82.6 kJ, 比文献报道的三叠氮基-均三嗪的(70.2 kJ)更高. —N4H、—N3 、—N4 H3 、—N2 H和—CN取代的均三嗪衍生物, 生成热为863.1-1735.2 kJ·mol-1, 但—N4H和—N4H3取代的衍生物分解能较小,稳定性较差.     

五嗪含氮取代基衍生物结构和性质的理论研究

采用密度泛函理论(DFT)方法在B3LYP/aug-cc-pvDZ理论水平上研究了CN, NO₂, NH₂, N₃, N₂H, NHNH₂, N₄H和N₄H₃等含氮取代基取代五嗪环上的氢原子生成的衍生物, 预测了它们的分子构型、分解能及含能性质. 对衍生物分解能的研究结果表明, CN和NH₂取代的衍生物的分解能比未取代时更高, 而其余基团的取代使分解能降低; 取代基化合物的生成热越大, 取代五嗪中的氢原子后生成衍生物的生成热也越大. N₄H₃, NO₂, H, N₂H, N₄H, N₃和CN取代的五嗪衍生物的单位原子生成热为72.6～108.9 kJ, 比文献报道的三叠氮基-均三嗪的(70.2 kJ)更高. 对于CN, N₂H, N₄H₃, N₃和N₄H取代的衍生物, 其生成热为871.4～1159.3 kJ•mol^－1, 但N₄H和N₄H₃的分解能较小, 稳定性较差. 因此, N₃, N₂H和CN取代的衍生物可能成为高能量、低感度的含能材料.     

高能量密度材料3,3′-偶氮-1,2,4,5-四嗪衍生物的分子设计

运用密度泛函理论(DFT)方法,计算系列3,3′-偶氮-1,2,4,5-四嗪衍生物的生成热.结果显示:—N3取代基在增加3,3′-偶氮-1,2,4,5-四嗪衍生物的生成热方面起了非常重要的作用.通过分析标题化合物的最弱键离解能发现:—NH2或—N3取代基非常有利于增加衍生物的热稳定性.计算的爆速(D)和爆压(p)数值表明:—NO2或—NF2取代基有利于提高3,3′-偶氮-1,2,4,5-四嗪衍生物的爆轰性能.综合爆轰性能和热稳定性的计算结果,3种3,3′-偶氮-1,2,4,5-四嗪衍生物可以作为潜在的品优高能量密度材料(HEDM)候选物.     

均四嗪衍生物结构、生成焓及爆轰性能的理论研究

运用DFT-w B97/6-31+G**方法对23种1,2,4,5-四嗪衍生物的几何结构、自然键轨道(NBO)和生成焓(EOF)进行研究,并在此基础上运用Kamlet-Jacobs方程估算衍生物的爆轰性能,得到其爆速在6.69~9.37 km/s之间;基于统计热力学,求得部分标题化合物在200~800 K温度范围内的热力学性质,随温度T升高,热容Cp、熵Sm及焓Hm逐渐增大。根据最小键级理论,C-R(取代基)键和N-R键可能是1,2,4,5-四嗪衍生物高温裂解的热引发键。综合分析,基团-NO2、-N3和-N=N-有助于提高四嗪衍生物的生成焓和爆轰性能,3,6-二硝基-1,2,4,5-四嗪和3,6-二偶氮基-二硝基-1,2,4,5-四嗪从能量、爆轰性能上可以作为高能量密度材料候选物。     

1-[6-(3,5-二甲基-1H-吡唑-1-基)-1,2,4,5-四嗪-3-基]酰肼及其衍生物的合成与表征

以水合肼和硝酸胍为原料,经肼化、环化、氧化和肼化四步反应合成了1-[6-(3,5-二甲基-1H吡唑-1-基)-1,2,4,5-四嗪-3-基]酰肼(4);4与酰氯或磺酰氯反应合成了一系列新型的1-[6-(3,5-二甲基-1H-吡唑-1-基)-1,2,4,5-四嗪-3基]酰肼衍生物(6a～6j),其结构经1H NMR,IR...     

N,N′-二-(3,5-二甲基苯基)-3,6-二甲基-1,4-二氢-1,2,4,5-四嗪-1,4-二甲酰胺的合成

1,2,4,5-四嗪衍生物具有抗肿瘤,杀菌,杀虫等活性,我们曾合成了具有抗肿瘤活性的N,N′-二苯基-3,6-二甲基-1,4-二氢-1,2,4,5-四嗪-1,4-二甲酰胺(3a)[1,2,3],合成路线见图1.研究它们的抗肿瘤活性时发现该化合物的苯环间位若以N,N-二甲基取代,对小鼠白血病细胞(P-388)和人肺腺癌细胞(A-549)有很强的抗肿瘤活性.     

几种新型六氮杂异伍兹烷衍生物结构与性能的理论预测—— 高能量密度化合物的寻求

以CN, NC, ONO2, N3, NH2, N2H, NHNH2, N4H和N4H3 9种含氮高能基团为取代基, 分别取代2,4,6,8,10,12-六氮杂异伍兹烷(IW)中亚氨基的6个H原子所形成的9种六氮杂异伍兹烷衍生物作为研究目标分子. 运用密度泛函理论, 在B3LYP/6-31G**水平上求得了它们的分子几何构型、电子结构、解离能(BDE)及IR谱等信息, 并设计等键反应计算了生成热( ). 基于统计热力学原理计算拟合了100～1200 K温度范围内体系的热力学函数, 利用Kamlet-Jacobs方程估算了它们的爆轰性能. 研究结果表明, 9种六氮杂异伍兹烷衍生物存在两种可能的热解引发类型. 在衍生物HNiIW, HBDAIW和HBAIW中, 可能的热解引发键是取代基内部的化学键, 而其余衍生物的热解引发键则可能是骨架N与取代基R之间N—R键. 另外, 硝酸酯基(ONO2)取代所得化合物HNiIW的密度ρ、爆速D及爆压p分别为1.998 g•cm－3, 9.71 km•s－1和44.47 GPa, 完全达到高能量密度化合物(HEDC)的基本要求, 且优于已应用的HNIW, 有望成为新型的HEDC.     

3-取代-4-氧-3H-咪唑并[5,1-d][1,2,3,5]四嗪-8-羧酸衍生物抗癌活性的构效关系

采用量子化学和分子力学方法研究3-取代-4-氧-3H-咪唑并[5,1-d] [1,2,3,5]四嗪-8-羧酸衍生物分子结构与抗癌活性的关系.结果表明,3-取代-4-氧-3H-咪唑并[5,1-d] [1,2,3,5]四嗪-8-羧酸衍生物抗癌活性与分子疏水性参数logP、8位取代基R1上的净电荷等因素有关,可通过向8位引入带正电荷取代基的办法来提高先导化合物的抗癌活性.     

s-四嗪-水簇复合物的理论研究

用量子化学B3LYP方法和6-31＋＋G**基函数研究了s-四嗪-水簇复合物基态分子间相互作用, 并进行了构型优化和频率计算, 分别得到无虚频稳定的s-四嗪-(水)₂复合物、s-四嗪-(水)₃复合物和s-四嗪-(水)₄复合物6个、9个和12个. 复合物存在较强的氢键作用, 复合物结构中形成一个N…H—O氢键并终止于O…H—C氢键的氢键水链构型最稳定. 经基组重叠误差和零点振动能校正后, 最稳定的1∶2, 1∶3和1∶4(摩尔比)复合物的结合能分别是41.35, 70.9和 94.61 kJ/mol. 振动分析显示氢键的形成使复合物中水分子H—O键对称伸缩振动频率减小(红移). 研究表明N…H键越短, N…H—O键角越接近直线, 稳定化能越大, 氢键作用越强. 同时, 用含时密度泛函理论方法在TD-B3LYP/6-31＋＋G**水平计算了s-四嗪单体及其氢键复合物的第一¹(n, p*)激发态的垂直激发能.     

3,3''''-偶氮-(6-氨基-1,2,4,5-四嗪)的合成及性能研究

以3,6-对(3,5-二甲基吡唑)-1,2,4,5-四嗪(BT)为起始物,经亲核取代、氧化脱氢、氨解和水解等四步反应,合成了高氮含能化合物3,3'-偶氮-(6-氨基-1,2,4,5-四嗪)(DAAT).对DAAT的热分解性能进行了研究,由DSC、PDSC和TG-DTG技术获得了DAAT的热分解动力学参数和机理函数.结果表明,DAAT的热稳定性好,能量高.在5℃/min升温速率下,DAAT在283℃左右开始分解,放热峰值320℃,分解放热峰的分解焓为1974.33J/g,高于相同条件下硝胺系炸药HMX的分解焓;采用Kissinger法和Ozawa法求得其活化能分别为209.69和208.77kJ/mol;其热分解速率对压强比较敏感,且与环境压强成正比.采用VLW EOS对DAAT的爆轰性能进行了理论计算,结果表明将DAAT与传统含能材料混合,有望制备出高能钝感炸药.     

Synthesis, Crystal Structure Analysis and DFT Calculation of 1-Benzoyl-3,6-diphenyl-1,4-dihydro-1,2,4,5-tetrazine

The new title compound, 1-benzoyl-3,6-diphenyl-1,4-dihydro-1,2,4,5-tetrazine (C21H16N4O, Mr = 340.38), has been prepared and its crystal structure can not be confirmed by the results of MS, elemental analysis, IR spectrum and 1H NMR spectrum, but determined by X-ray diffraction. The title compound crystallizes in an orthorhombic space group P212121 with a = 7.1100(19), b = 12.115(3), c = 19.884(6), V = 1712.7(8)3, Z = 4, Dc = 1.320 g/cm3, F(000) = 712, μ = 0.085 mm-1, MoKa radiation (λ = 0.71073), R = 0.0334 and wR = 0.0845 for 2254 observed reflections with I 2σ(I). X-ray diffraction analysis reveals that the central tetrazine adopts an unsymmetrical boat conformation. According to the bond lengths of tetrazine ring, the molecule should be 1,4-dihydro-1,2,4,5-tetrazine, rather than 1,2-dihydro-1,2,4,5-tetrazine. The crystal structure is stabilized mainly by intermolecular N–H···O hydrogen bonds.     

Microwave-assisted synthesis of 3,6-di(pyridin-2-yl)pyridazines: unexpected ketone and aldehyde cycloadditions

3,6-Di(pyridin-2-yl)pyridazines are an interesting class of compounds because of their metal-coordinating ability resulting in the self-assembly into [2x2] gridlike metal complexes with copper(I) or silver(I) ions. These and other substituted pyridazines can be prepared by the inverse-electron-demand Diels-Alder reactions between acetylenes and 1,2,4,5-tetrazines. In this contribution, the effect of (superheated) microwave conditions on these generally slow cycloadditions is described. The cycloaddition of acetylenes to 3,6-di(pyridin-2-yl)-1,2,4,5-tetrazine could be accelerated from several days reflux in toluene or N,N-dimethylformamide to several hours in dichloromethane at 150 degrees C. In addition, the unexpected cycloaddition of the enol tautomers of various ketones and aldehydes to 3,6-di(pyridin-2-yl)-1,2,4,5-tetrazine is described in detail providing an alternative route for the synthesis of (substituted) pyridazines.     

Anion-templated self-assembly of highly stable Fe(II) pentagonal metallacycles with short anion-π contacts

The crystal structures of the self-assembled metallapentacycles [{Fe(5)(bptz)(5)(CH(3)CN)(10)} ? 2SbF(6)][SbF(6)](8) (1) and [{Fe(5)(bmtz)(5)(CH(3)CN)(10)} ? SbF(6)][SbF(6)](9) (2) with the π-acidic ligands bptz (3,6-bis(2-pyridyl)-1,2,4,5-tetrazine) and bmtz (3,6-bis(2-pyrimidyl)-1,2,4,5-tetrazine), respectively, revealed cationic pentagons templated by [SbF(6)](-) ions. The short anion-π contacts established between the anions and the tetrazine rings play an important role in the stability of the pentagons.     

Oxidations of 3,6-diamino-1,2,4,5-tetrazine and 3,6-bis(s,s-dimethylsulfilimino)-1,2,4,5-tetrazine

Oxidation of 3,6-diamino-1,2,4,5-tetrazine ( 1 ) with most peracids gave 3,6-diamino-1,2,4,5-tetrazine 1,4-dioxide ( 3 ) as the major product; however, treatment of 1 with peroxytrifluoroacetic acid (PTFA) gave 3,6-diamino-1,2,4,5-tetrazine 1-oxide ( 4 ) as the major product along with a small amount of 3-amino-6-nitro-1,2,4,5-tetrazine 2,4-dioxide ( 5 ). Oxidation of 3,6-bis(S,S-dimethylsulfilimino)-1,2,4,5-tetrazine ( 6 ) with 3-chloroperoxybenzoic acid (MCPBA) gave 3-S,S-(dimethylsulfilimino)-6-nitroso-1,2,4,5-tetrazine ( 7 ), which was oxidized further with dimethyldioxirane to 3-(S,S-dimethylsulfoximino)-6-nitro-1,2,4,5-tetrazine ( 8 ). All attempts to obtain 3,6-dinitro-1,2,4,5-tetrazine ( 2 ) by further oxidation of 7 or 8 failed.     

Synthesis of the bi-heterocyclic parent ring system 1,2,4-triazolo[4,3-b][1,2,4,5]tetrazine and some 3,6-disubstituted derivatives

The synthesis of the previously unknown parent ring system was developed. Treatment of 3-hydrazino-1,2,4,5-tetrazine ( 4 ) with diethoxymethyl acetate gave the parent ring system. Similar treatment of 3-(3,5-dimethylpyrazol-1-yl)-6-hydrazino-1,2,4,5-tetrazine ( 2 ) with one carbon cyclizing reagents gave 3,6-di-substituted derivatives of the 1,2,4-triazolo-1,2,4,5-tetrazine ring system.     

Nature of weak inter- and intramolecular interactions in crystals 4. Bifurcated N—H...N bond in a crystal of 3-amino-6-(3,5-dimethylpyrazol-1-yl)-1,2,4,5-tetrazine

The nature and the energy of the intermolecular bifurcated N—H...N hydrogen bond in the crystal of 3-amino-6-(3,5-dimethylpyrazol-1-yl)-1,2,4,5-tetrazine were studied by analyzing the electron density distribution based on X-ray diffraction data. In contrast to two-center hydrogen bonds, the total energy of the N—H...N interaction is virtually independent of the geometric parameters of two contacts and is determined only by the nature of the interacting atoms. Dedicated to Academician V. I. Minkin on the occasion of his 70th birthday. __________ Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 4, pp. 903–910, April, 2005.     

An improved synthesis of 3,6-diamino-1,2,4,5-tetrazine. II. From triaminoguanidine and 2,4-pentanedione

A new synthesis for the title compound that gives an 80% overall yield was developed. Treatment of triaminoguanidine monohydrochloride ( 1 ) with 2,4-pentanedione ( 2 ) gave 3,6-bis(3,5-dimethylpyrazol-1-yl)-1,2-dihydro-1,2,4,5-tetrazine ( 3 ) in 80–85% yield. Oxidation of 3 with nitric oxide or nitrogen dioxide to 3,6-bis(3,5-dimethyylpyrazol-1-yl)-1,2,4,5-tetrazine ( 4 ) followed by ammonolysis of 4 gave 3,6-diamino-1,2,4,5-tetrazine ( 5 ) in guantitatively yields.     

An unusual dinuclear ruthenium(III) complex with a conjugated bridging ligand derived from cleavage of a 1,4-dihydro-1,2,4,5-tetrazine ring. Synthesis,structure, and UV-vis-NIR spectroelectrochemical characterization of a five-membered redox chain incorporating two mixed-valence states

Reaction of [Ru(acac)(2)(CH(3)CN)(2)] with 3,6-bis(3,5-dimethylpyrazol-1-yl)-1,4-dihydro-1,2,4,5-tetrazine (H(2)L) results in formation of an unexpected dinuclear complex [(acac)(2)Ru(III)(L(1))Ru(III)(acac)(2)] (1) in which the bridging ligand [L(1)](2)(-) contains an (-)HN[bond]C[double bond]N[bond]N[double bond]C[bond]NH(-) unit arising from two-electron reduction of the 1,4-dihydro-1,2,4,5-tetrazine component of H(2)L. The crystal structure of complex 1 confirms the oxidation assignment of the metal ions as Ru(III) and clearly shows the consequent arrangement of double and single bonds in the bridging ligand, which acts as a bis-bidentate chelate having two pyrazolyl/amido chelating sites. Cyclic voltammetry of the complex shows the presence of four reversible one-electron redox couples, assigned as two Ru(III)/Ru(IV) couples (oxidations with respect to the starting material) and two Ru(II)/Ru(III) couples (reductions with respect to the starting material). The separation between the two Ru(III)/Ru(IV) couples (Delta E(1/2) = 700 mV) is much larger than that between the two Ru(II)/Ru(III) couples (Delta E(1/2) = 350 mV) across the same bridging pathway, because of the better ability of the dianionic bridging ligand to delocalize an added hole (in the oxidized mixed-valence state) than an added electron (in the reduced mixed-valence state), implying some ligand-centered character for the oxidations. UV-vis-NIR spectroelectrochemical measurements were performed in all five oxidation states; the Ru(II)-Ru(III) mixed-valence state of [1](-) has a strong IVCT transition at 2360 nm whose parameters give an electronic coupling constant of V(ab) approximately 1100 cm(-1), characteristic of a strongly interacting but localized (class II) mixed-valence state. In the Ru(III)-Ru(IV) mixed-valence state [1](+), no low-energy IVCT could be detected despite the strong electronic interaction, possibly because it is in the visible region and obscured by LMCT bands.