CuPd/MgO室温高效催化甲醛溶液产氢

采用浸渍还原法制备了MgO负载纳米CuPd合金的复合催化剂(CuPd/MgO)。该催化剂在室温催化甲醛溶液重整产氢过程中表现出优异的催化性能,转换频率(TOF)高达812.6h^-1,分别是相同条件下Cu/MgO(TOF=356.7h^-1)和Pd/MgO(TOF=34.8h^-1)的2.3倍和23倍。基于实验测试和表征结果,发现CuPd/MgO催化剂中纳米CuPd合金与表面富集缺陷的MgO载体之间存在金属-载体强相互作用。这种相互作用能够促进氧气在催化剂表面吸附活化并生成活性氧物种(超氧阴离子自由基,·O₂^-),·O₂^-先后促进甲醛中的C—H键断裂和水分子的解离,随后与反应体系中生成的质子及氢自由基(·H)依次结合,最终实现氢气的析出与氧气的再生。     

纳米晶态硼化钴的合成及其催化氨硼烷高效制氢

采用简单的煅烧工艺合成了纳米硼化钴(CoB)晶体,并首次研究了纳米CoB晶体在氨硼烷溶液水解制氢过程中的催化活性。研究发现,纳米CoB晶体具有较高的催化活性,在室温条件下其转换频率(TOF)为35.3mol_H2·mol_cat^-1·min^-1,优于同等条件下贵金属Pt催化剂(TOF=29.3mol_H2·mol_cat^-1·min^-1)。此外,循环测试8次后纳米硼化物晶体的催化制氢性能没有发生衰减。进一步研究发现CoB表面的Co⁰物种是催化制氢的活性位点,而表面的B物种位点能够有效辅助Co⁰位点实现协同催化氨硼烷制氢。     

纳米晶态硼化钴的合成及其催化氨硼烷高效制氢

采用简单的煅烧工艺合成了纳米硼化钴(CoB)晶体,并首次研究了纳米CoB晶体在氨硼烷溶液水解制氢过程中的催化活性。研究发现,纳米CoB晶体具有较高的催化活性,在室温条件下其转换频率(TOF)为35.3 mol_H2·mol_cat^-1·min^-1,优于同等条件下贵金属Pt催化剂(TOF=29.3 mol_H2·mol_cat^-1·min^-1)。此外,循环测试8次后纳米硼化物晶体的催化制氢性能没有发生衰减。进一步研究发现CoB表面的Co⁰物种是催化制氢的活性位点,而表面的B物种位点能够有效辅助Co⁰位点实现协同催化氨硼烷制氢。     

在一维ZnO表面可控构建Co3Mn1纳米晶及其催化CO氧化性能

利用热分解法制备了结构明确的负载型纳米晶催化剂。在纳米晶成核和生长过程中加入一维ZnO纳米棒作为晶种,调控不同组分的纳米晶在 ZnO纳米棒表面均匀生长,从而获得了结构明确的 MnO/ZnO、Co₃O₄/ZnO、Co₃Mn₁/ZnO催化剂。透射电子显微镜(TEM)与 X 射线粉末衍射(XRD)结果显示,不同组分纳米颗粒都均匀分散在 ZnO 纳米棒表面。相对于 MnO/ZnO 和Co₃O₄/ZnO催化剂,Co₃Mn₁/ZnO催化剂在CO氧化反应中具有最佳的催化性能。在200 L·g_cat^-1·h^-1的气时空速下,Co₃Mn₁/ZnO催化剂起活温度为 50 ℃,其 T100(CO 转化率达到 100% 时的温度)为 200 ℃;利用 X 射线光电子能谱(XPS)对不同催化剂进行了分析,结果显示,Co₃Mn₁/ZnO催化剂的氧空位比MnO/ZnO催化剂提高了30%以上,从而使其具有较高的CO氧化催化性能。更为重要的是,Co₃Mn₁/ZnO复合纳米晶催化剂的活化能(39.4 kJ·mol^-1)远低于其它负载型纳米晶催化剂。     

Mg掺杂In2O3-x催化剂光热催化CO2加氢

为提高光热催化CO₂加氢催化剂In₂O₃的催化活性,采用均相水热法制备Mg(OH)₂-In(OH)₃前驱体,通过高温煅烧和H₂-还原处理得到了富含氧空位的Mg掺杂In₂O_3-x(Mg-In₂O_3-x)催化剂。在300℃、常压、可见光照射条件下,CO₂加氢转化为CO的CO₂转化率可达31.20%,CO产生速率为14.22 mmol·gcat^-1·h^-1,CO选择性为100%。相比于单一In₂O_3-x催化剂,Mg-In₂O_3-x催化剂光热催化CO₂转化率及CO产生速率明显提高,这归因于Mg成功掺杂到In₂O₃形晶格中,促进In₂O₃表面氧空位的形成,进而对可见光响应效率大幅提高,并有效减缓光生电子-空穴的复合。     

磁性Co/TiB2室温高效催化氨硼烷产氢及串联降解有机污染物

通过熔盐法制备TiB₂载体,并采用简单的沉淀-沉积法制备了Co/TiB₂磁性可回收纳米催化剂,用于室温催化氨硼烷（NH₃BH₃）溶液产氢及串联降解对硝基苯酚（4-NP）及偶氮染料酸性橙7（AO7）、酸性红1（AR1）和甲基橙（MO）等有机污染物。采用X射线衍射、扫描电子显微镜、透射电子显微镜、X射线光电子能谱、振动样品磁强计等表征方法对催化剂的微观形貌和结构等进行分析。结果表明,Co纳米粒子均匀地分布在TiB₂载体表面,晶粒尺寸约为40 nm,并且被TiB₂载体包覆,具有典型的金属-载体强相互作用。Co/TiB₂表现出优异的室温催化NH₃BH₃溶液产氢活性,产氢速率为565.8 mol_H2·mol_cat^-1·h^-1。在串联降解有机污染物反应中,Co/TiB₂在7 min内催化4-NP氨基化的转化率接近100%,反应速率常数高达0.72 min^-1;降解AO7的反应速率常数在3种偶氮染料中最高（0.34 min^-1）。通过EPR-DMPO（EPR=电子顺磁共振,DMPO=5,5-二甲基-1-吡咯啉-N-氧化物）自由基捕获实验检测出Co/TiB₂+NH₃BH₃催化体系中产生大量的氢自由基（·H）。得益于·H的强还原性,Co/TiB₂+NH₃BH₃催化体系能够将4-NP氨基化为具有更高价值的对氨基苯酚（4-AP）,同时能够还原偶氮染料分子中的显色基团偶氮基（—N=N—）。     

Ru/Ce(OH)CO3纳米复合材料催化氨硼烷水解产氢

采用一种简单的方法快速合成了Ru/Ce（OH）CO₃纳米复合材料。基于TG,XRD,TEM,EDX,XPS和ICP等方法详细表征了所制备的催化剂,并用于催化氨硼烷水解制氢。表征结果表明尺寸大约为4.8 nm的Ru纳米粒子高度分散在Ce（OH）CO₃纳米棒上。该催化剂对于氨硼烷水解制氢表现出优异的催化性能,在室温下其转化频率（TOF）达到389.6 mol_H2·mol_Ru^-1·min^-1。而且该催化剂循环使用11次之后依然能够对氨硼烷催化产氢保持很高的活性。     

Ru/Ce(OH)CO3纳米复合材料催化氨硼烷水解产氢

采用一种简单的方法快速合成了Ru/Ce（OH）CO₃纳米复合材料。基于TG,XRD,TEM,EDX,XPS和ICP等方法详细表征了所制备的催化剂,并用于催化氨硼烷水解制氢。表征结果表明尺寸大约为4.8 nm的Ru纳米粒子高度分散在Ce（OH）CO₃纳米棒上。该催化剂对于氨硼烷水解制氢表现出优异的催化性能,在室温下其转化频率（TOF）达到389.6 mol_H2·mol_Ru^-1·min^-1。而且该催化剂循环使用11次之后依然能够对氨硼烷催化产氢保持很高的活性。     

Cu、N共掺杂TiO2纳米管光催化重整甘油制备合成气

通过碱性水热-离子交换法制备了Cu、N共掺杂TiO₂纳米管(Cu/N-TNT),对其光催化重整甘油制备合成气性能进行了研究。结果表明,Cu/N-TNT具有富含氧空位(O_V)的管状结构,N以Ti-N形式取代部分O形成杂质能级,Cu以Cu²⁺形式掺杂在催化剂晶格间隙和表面,Cu、N共掺杂促进TiO₂表面电荷有效分离,有利于其光催化重整甘油制备合成气活性和选择性的提高。紫外光照射8 h时,掺Cu量为0.15%的Cu/N-TNT催化剂上CO和H₂产量分别为7.3和8.5 mmol·g^-1,是原始TiO₂的9.1和70.8倍,n_H2/n_CO从0.52提高为1.18,n_CO/n_CO2从0.21提高至0.42。Cu/N-TNT表面N和O_V为醛类脱羰和甲酸脱水生成CO提供反应活性位点,Cu作为浅势阱提高光生电子-空穴分离效率。光生空穴(h⁺)是光催化重整甘油制备合成气过程中的主要活性物种,大量羟基自由基(·OH)和超氧自由基(·O₂^-)会导致甘油过度氧化,使CO选择性降低。     

铕掺杂对Co3O4活化过一硫酸盐降解亚甲基蓝性能的增强

以Co （NO₃）₂和Eu （NO₃）₃为原料,采用草酸盐-热分解法制得了系列不同Co/Eu比例（n_Co/n_Eu）的多孔双金属复合氧化物催化剂,并对其活化过一硫酸盐（PMS）降解亚甲基蓝（MB）的性能进行对比评价。结果表明,按n_Co/n_Eu=9制得的材料（Co₉Eu₁）具有最为优异的活化PMS降解MB的性能。在温度为25℃、催化剂用量和PMS浓度分别为0.10 g·L^-1和0.6 mmol·L^-1的反应条件下,Co₉Eu₁/PMS体系对MB的降解率可达86.66%,而纯Co₃O₄催化下的MB降解率仅为52.62%。Co₉Eu₁出色的催化性能是由于Eu³⁺的缺电子特性增强了对吸附于催化剂表面PMS的极化而使其更易被主催化成分Co₃O₄活化。体系中阴离子C₂O₄^2-和HCO₃^-的存在对Co₉Eu₁/PMS氧化降解MB的性能具有明显抑制作用。猝灭实验和电子顺磁共振谱（EPR）证实Co₉Eu₁/PMS体系中同时存在SO₄^-·、·OH和·O₂^-三种自由基型活性物种以及¹O₂非自由基型活性物种,其中SO₄^-·对MB的氧化降解起关键作用。Co₉Eu₁具有良好的稳定性,在连续4次循环使用中其催化性能未见明显变化。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Microwave-assisted copper-catalyzed stereoselective ring expansion of three-membered heterocycles with α-diazo-β-dicarbonyl compounds

Microwave-assisted copper-catalyzed ring expansions of three-membered heterocycles with α-diazo-β-dicarbonyl compounds were investigated. Thiiranes generated 3-acyl-5,6-dihydro-1,4-oxathiines in the presence of copper sulfate and trans-3-acyl-5,6-dihydro-1,4-oxathiines as stereospecific products for 1,2-disubstituted cis-thiiranes through an intramolecular S_N2 process. Oxiranes gave rise to 2-acyl-5,6-dihydro-1,4-dioxines under the catalysis of copper hexafluoroacetylacetonate and cis-3-acyl-5,6-dihydro-1,4-dioxines as stereospecific products for 1,2-disubstituted cis-oxiranes via an intimate ion-pair mechanism. The current method provides a direct and simple strategy in efficient preparation of 3-acyl-5,6-dihydro-1,4-oxathiines and 2-acyl-5,6-dihydro-1,4-dioxines, important agents in medicinal and agricultural chemistry, from readily available thiiranes and oxiranes, respectively.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.