Structural changes in chlorpropamide at high pressure

The crystalline structure of a molecular crystal of chlorpropamide C₁₀H₁₃ClN₂O₃S is studied by X-ray diffraction at high pressures of up to 4.2 GPa at room temperature. Under normal conditions the structure of chlorpropamide has orthorhombic symmetry with the space group P2₁2₁2₁. At high pressures P > 1.2 GPa, a polymorphic phase transition into the monoclinic phase with the space group P2₁ is observed. The baric dependences of the lattice parameters and unit-cell volumes are obtained for both phases of chlorpropamide.     

Study of the P-T phase diagram of pyridinium perchlorate by X-ray diffraction and Raman spectroscopy

The crystal structure and vibrational spectra of deuterated pyridinium perchlorate (d ₅PyH)ClO₄ (C₅D₅NHClO₄) are studied by means of neutron diffraction in ambient conditions, X-ray diffraction at high pressures up to 3.5 GPa in the temperature range 297–420 K, and Raman spectroscopy at high pressures up to 5.7 GPa. Deuterated pyridinium perchlorate at ambient conditions has rhombohedral structure with the R3m symmetry (paraelectric phase I). Over the pressure range of 0.5–1.2 GPa, the phase II with monoclinic symmetry Cm exists. At pressure P ～ 1.2 GPa, the phase transition to monoclinic phase III with the Pm symmetry is observed at ambient temperature. The lattice parameters, unit cell volume, and frequencies of internal vibrational modes as functions of pressure are obtained for different phases of deuterated pyridinium perchlorate. The P-T phase diagram of (d ₅PyH)ClO₄ over the extended pressure and temperature range is discussed.     

Structural aspects of the antiferroelectric-paraelectric phase transition in double perovskite Pb2MgWO6 at high pressures and temperatures

The crystal structure of antiferroelectric Pb₂MgWO₆ has been studied using neutron diffraction at high pressures to 5.4 GPa at room temperature and energy-dispersive X-ray diffraction at high pressures to 4 GPa in the temperature range 300–400 K. At normal conditions, in Pb₂MgWO₆, there is an antiferroelectric phase with the crystal structure described by the orthorhombic symmetry with space group Pnma. At temperature T = 313 K and normal pressure or at room temperature and pressure P ～ 0.9 GPa, the crystal under-goes a structural phase transition to the cubic phase with space group $Fm\bar 3m$ (paraelectric phase). The temperature and pressure dependences of the lattice parameters, unit cell volume, and interatomic bond lengths have been obtained, and the thermal expansion coefficients and the bulk moduli have been calculated for the antiferroelectric and paraelectric phases of Pb₂MgWO₆.     

Predictions of pressure-induced structural transition,mechanical and thermodynamic properties of α-and β-Si₃N₄ ceramics:ab initio and quasi-harmonic Debye modeling

The plane-wave pseudo-potential method within the framework of ab initio technique is used to investigate the structural and elastic properties of α-and β-Si3N4.The ground-state parameters accord quite well with the experimental data.Our calculation reveals that α-Si3N4 can retain its stability to at least 40 GPa when compressed at 300 K.The α→β phase transformation would not occur in a pressure range of 0-40 GPa and a temperature range of 0-300 K.Actually,the α→β transition occurs at 1600 K and 7.98 GPa.For α-and β-Si3N4,the c axes are slightly more incompressible than the a axes.We conclude that β-Si3N4 is a hard material and ductile in nature.On the other hand,β-Si3N4 is also found to be an ionic material and can retain its mechanical stability in a pressure range of 0-10 GPa.Besides,the thermodynamic properties such as entropy,heat capacity,and Debye temperature of α-and β-Si3N4 are determined at various temperatures and pressures.Significant features in these properties are observed at high temperature.The calculated results are in good agreement with available experimental data and previous theoretical values.Many fundamental solid-state properties are reported at high pressure and high temperature.Therefore,our results may provide useful information for theoretical and experimental investigations of the Si3N4 polymorphs.     

Electron transport properties of lithium and phase transitions at high pressures

The electric resistivity and thermopower of lithium have been precisely measured at high pressures (up to 8 GPa) and temperatures from room temperature to 100°C. Transition to the fcc phase of lithium has been analyzed. The hysteresis of the direct and inverse transitions is 0.3 GPa at room temperature, decreases slightly with an increase in the temperature, and is almost independent of the prehistory of the sample. The phase transition line on the P-T diagram has a positive slope of dP/dT = 0.03 GPa/K. It is assumed that the fcc phase of lithium, which is stable at a high pressure, can appear for kinetic regions from the 9R phase, which is intermediate in energy between the bcc and fcc modifications.     

Experimental constraints on the phase diagram of elemental zirconium

The phase diagram of zirconium metal has been studied using synchrotron X-ray diffraction and time-of-flight neutron scattering at temperatures and pressures up to 1273 K and 17 GPa. The equilibrium phase boundary of the α-ω transition has a dT/dP slope of 473 K/GPa, and the extrapolated transition pressure at ambient temperature is located at 3.4 GPa. For the ω-β transition, the phase boundary has a negative dT/dP slope of 15.5 K/GPa between 6.4 and 15.3 GPa, which is substantially smaller than a previously reported value of −39±5 K/GPa in the pressure range of 32-35 GPa. This difference indicates a significant curvature of the phase boundary between 15.3 and 35 GPa. The α-ω-β triple point was estimated to be at 4.9 GPa and 953 K, which is comparable to previous results obtained from a differential thermal analysis. Except for the three known crystalline forms, the β phase of zirconium metal was found to possess an extraordinary glass forming ability at pressures between 6.4 and 8.6 GPa. This transformation leads to a limited stability field for the β phase in the pressure range of 6-16 GPa and to complications of high-temperature portion of phase diagram for zirconium metal.     

Phase transitions in cerium at high pressures (up to 15 GPa) and high temperatures

Phase transitions in cerium have been studied by the electrical resistance method in the 15-GPa pressure range at high temperatures. At pressures above 10 GPa, cerium represents a mixture of stable and metastable phases, the composition of this mixture being dependent on the trajectory in the P-T plane that leads to a given point. Transformations in both stable and metastable components of the mixture proceeding rather independently display a complicated picture of phase transitions. It was assumed that only the α (fcc) and α′ (α-U) phases are stable at pressures above the well-known γ-α transition, the other phases being metastable. The proposed bow-shaped equilibrium phase diagram includes an extremely wide hysteresis region, where stable and metastable phases can coexist. The fcc α phase alone survives upon heating above 50°C at 15 GPa.     

In situ X-Ray study of thermal expansion and phase transition of iron at multimegabar pressure

The density of varepsilon-iron has been calculated at pressures and temperatures up to 300 GPa and 1300 K, respectively. We observe varepsilon to beta phase transition at pressures between 135 and 300 GPa and temperature above 1350 K; the pattern can be interpreted in terms of double hexagonal close-packed structure. The density calculated at high pressure and temperature (330-360 GPa and 5000-7000 K) closely matches with preliminary reference Earth model density, thereby imposing constraint on the composition of the Earth's inner core.     

Structural studies of the P-T phase diagram of sodium niobate

The crystal structure of sodium niobate (NaNbO₃) has been investigated by energy-dispersive X-ray diffraction at high pressures (up to 4.3 GPa) in the temperature range 300–1050 K. At normal conditions, NaNbO₃ has an orthorhombic structure with Pbcm symmetry (antiferroelectric P phase). Upon heating, sodium niobate undergoes a series of consecutive transitions between structural modulated phases P-R-S-T(1)-T(2)-U; these transitions manifest themselves as anomalies in the temperature dependences of the positions and widths of diffraction peaks. Application of high pressure leads to a decrease in the temperatures of the structural transitions to the R, S, T(1), T(2), and U phases with different baric coefficients. A phase diagram for sodium niobate has been build in the pressure range 0–4.3 GPa and the temperature range 300–1050 K. The dependences of the unit-cell parameters and volume on pressure and temperature have been obtained. The bulk modulus and the volume coefficients of thermal expansion have been calculated for different structural modulated phases of sodium niobate. A phase transition (presumably, from the antiferroelectric orthorhombic P phase to the ferroelectric rhombohedral N phase) has been observed at high pressure (P = 1.6 GPa) and room temperature.     

Temperature dependence of bismuth structures under high pressure

It is unclear whether there is a liquid-liquid phase transition or not in the bismuth melt at high temperature and high pressure. If so, it will be necessary to confirm the boundary of the liquid-liquid phase transition and clarify whether it is a first-order phase transition. Here, based on x-ray absorption spectra and simulations, the temperature dependence of bismuth structures is investigated under different pressures. According to the similarity of characteristic peaks of x-ray absorption near edge structure (XANES) spectra, we estimate the possible temperature ranges of liquid-liquid phase transition to be 779-799 K at 2.74 GPa and 859-879 K at 2.78 GPa, 809-819 K at 3.38 GPa and 829-839 K at 3.39 GPa and 729-739 K at 4.78 GPa. Using ab initio molecular dynamics (AIMD) simulations, we obtain the stable structures of the bismuth melt at different temperatures and pressures, and calculated their electronic structures. Meanwhile, two stable phases (phase III-like and phase IV-like) of bismuth melts are obtained from different initial phases of bismuth solids (phase III and phase IV) under the same condition (3.20 GPa and 800 K). Assuming that the bismuth melt undergoes a phase transition from IV-like to III-like between 809 K and 819 K at 3.38 GPa, the calculated electronic structures are consistent with the XANES spectra, which provides a possible explanation for the first-order liquid-liquid phase transition.     

Magnetic ordering in Fe<Subscript>1.087</Subscript>Te under pressure

The crystal and magnetic structures of Fe_1.087Te have been studied by neutron powder diffraction in the temperature range from 1.7 to 80 K at pressures of  ≈0.4 and ≈1.2 GPa. No symmetry change of the tetragonal paramagnetic ambient pressure phase (space group P4/nmm) was observed for temperatures above 60 K and pressures up to  ≈1.2 GPa. A novel pressure-induced phase of Fe_1.087Te having orthorhombic symmetry (space group Pmmn) and incommensurate antiferromagneticbicollinear order was observed in the temperature range from 50 to 60 K at  ≈1.2 GPa. The known monoclinic ambient pressure phase of Fe_1.087Te (space group P2 ₁/n) with commensurate antiferromagnetic order was found to be stable up to at least  ≈1.2 GPa at low temperature.     

Predictions of pressure-induced structural transition, mechanical and thermodynamic properties of α-and β-Si3N4 ceramics: ab initio and quasi-harmonic Debye modeling

The plane-wave pseudo-potential method within the framework of ab initio technique is used to investigate the structural and elastic properties of α-and β-Si3N4.The ground-state parameters accord quite well with the experimental data.Our calculation reveals that α-Si3N4 can retain its stability to at least 40 GPa when compressed at 300 K.The α→β phase transformation would not occur in a pressure range of 0-40 GPa and a temperature range of 0-300 K.Actually,the α→β transition occurs at 1600 K and 7.98 GPa.For α-and β-Si3N4,the c axes are slightly more incompressible than the a axes.We conclude that β-Si3N4 is a hard material and ductile in nature.On the other hand,β-Si3N4 is also found to be an ionic material and can retain its mechanical stability in a pressure range of 0-10 GPa.Besides,the thermodynamic properties such as entropy,heat capacity,and Debye temperature of α-and β-Si3N4 are determined at various temperatures and pressures.Significant features in these properties are observed at high temperature.The calculated results are in good agreement with available experimental data and previous theoretical values.Many fundamental solid-state properties are reported at high pressure and high temperature.Therefore,our results may provide useful information for theoretical and experimental investigations of the Si3N4 polymorphs.     

Thermodynamics of a Magnetic Transition in MnS<Subscript>2</Subscript> at High Pressures

The behavior of the specific heat of MnS₂ at high pressures has been studied. A significant increase in the transition temperature T_N to an antiferromagnetic state with the pressure from 48.2 K at atmospheric pressure to 76 K at a pressure of 5.3 GPa has been revealed. The initial pressure derivative is dT _N /dP = 4.83 K/GPa. It has been found that the parameter α = d(logT _N )/d(logV ) = ?6.6 ± 0.1 is significantly different from the value α = ?10/3 ≈ ?3.3 (Bloch relation), which is typical of numerous antiferromagnetic insulators—transition- metal oxides and fluorides. The volume jump at the magnetic transition point has been estimated. The necessity of direct dilatometric measurements of the volume has been justified.     

High-pressure thermoelectric characteristics of Bi2Te3 semiconductor with different charge carrier densities

The measurements of the absolute values of the thermopower and of the relative electrical resistance have been performed for n type Bi₂Te₃ under hydrostatic pressure up to 9 GPa at room temperature. Under pressures exceeding 5 GPa and up to the phase transition (at 7 GPa), the samples with the charge carrier density below 10^?19 cm^?3 exhibit an anomalous growth of the thermopower. For the purest sample (n = 10^?18 cm^?3), the thermopower is as high as +150 μV/K. The pressure dependence of the electrical resistance for n-Bi₂Te₃ does not exhibit any anomalies up to the pressure corresponding to the phase transition (7 GPa). Thus, the state with the giant thermoelectric efficiency is found in Bi2Te3 under pressure before the phase transition.     

Thermophysical properties of the polymorphic modifications of lithium hydride in the megabar shock pressure range

The region of a high electrical conductivity of lithium hydride is experimentally determined in the pressure range 100–150 GPa and the temperature range 2000–3000 K of multiple shock compression. This result is used to construct thermodynamic potentials for the two polymorphic modifications of lithium hydride (B1, B2), and these potentials make it possible to calculate its thermophysical properties in the shock pressure range 80–1200 GPa. The calculated and experimental results are analyzed to determine the B1 ? B2 equilibrium line for the polymorphic modifications of lithium hydride at pressures up to 300 GPa and temperatures up to 2000 K.     

Neutron diffraction and electrical transport studies on the incommensurate magnetic phase transition in holmium at high pressures

Neutron diffraction and electrical transport measurements have been made on the heavy rare earth metal holmium at high pressures and low temperatures in order to elucidate its transition from a paramagnetic (PM) to a helical antiferromagnetic (AFM) ordered phase as a function of pressure. The electrical resistance measurements show a change in the resistance slope as the temperature is lowered through the antiferromagnetic Néel temperature. The temperature of this antiferromagnetic transition decreases from approximately 122 K at ambient pressure at a rate of -4.9 K GPa(-1) up to a pressure of 9 GPa, whereupon the PM-to-AFM transition vanishes for higher pressures. Neutron diffraction measurements as a function of pressure at 89 and 110 K confirm the incommensurate nature of the phase transition associated with the antiferromagnetic ordering of the magnetic moments in a helical arrangement and that the ordering occurs at similar pressures as determined from the resistance results for these temperatures.     

High pressure effect on the crystal and magnetic structure of Pr0.1Sr0.9MnO3 manganite

The crystal and magnetic structure of Pr_0.1Sr_0.9MnO₃ manganite has been studied by the neutron diffraction at high pressures up to 5 GPa in the temperature range 10?C295 K. At normal pressure and decreasing temperature the appearance of the C-type (T _N = 220 K) and G-type (T _N = 180 K) antiferromagnetic states occurs, which is accompanied by a structural phase transition from the cubic structure (Pm $ \bar 3 $ m space group) to the tetragonal structure (I4/mcm space group). It is shown that the temperature of the transition to the C-type antiferromagnetic phase increases with pressure with the pressure coefficient dT _N/dP = 4.0(5) K/GPa and the temperature of the transition to the G-type antiferromagnetic phase weakly depends on pressure.     

In situ X-ray observation of phase transformation in Fe2O3 at high pressures and high temperatures

A laser-heated sample in a diamond anvil cell and synchrotron X-ray radiation was used to carry out structural characterization of the phase transformation of Fe₂O₃ at high pressures (30-96 GPa) and high temperature. The Rh₂O₃(II) (or orthorhombic perovskite) structure transforms to a new phase, which exhibits X-ray diffraction data that are indicative of a CaIrO₃-type structure. The CaIrO₃-type structure exhibited an orthorhombic symmetry (space group: Cmcm) that was stable at temperatures of 1200-2800 K and pressure of 96 GPa (the highest pressure used). Unambiguous assignment of such a structure requires experimental evidence for the presence of two Fe species. Based on the equation of state of gold, the phase boundary of the CaIrO₃-type phase transformation was P (GPa)=59+0.0022×(T−1200) (K).     

α-LiIO3的等温压缩和高温高压下的相变

用金刚石压砧高压X射线衍射技术研究了α-LilO₃在室温高压下的压缩行为,压力达23.0GP_a。观察到晶格压缩的各向异性,其c/a轴比以-6.187×10^-3/GP_a的速率减小。得到其常压下的体弹模量B₀=39.2GP_a,体弹模量对压力的一阶导数B＇₀=3.787。α-LiIO₃在高温高压下转变成四方结构,与淬火卸压所得的ε-LiIO₃结构一致。 关键词：     

Structural phase transition in Bi2Te3 under high pressure

Structural change in Bi₂Te₃ under high pressure up to 16.6 GPa has been studied by powder x-ray diffraction. We observed two times of phase transitions at room temperature at the pressures of 8 and 14 GPa, respectively. According to our preliminary result on electrical resistance, it is reasonable to suppose that superconducting transition with T _c =2.8 K at the pressures of 10.2 GPa is observed in phase II. On the other hand, we found anomalies of the pressure dependences of lattice parameters and volume at around 2 GPa, which probably means the change in electrical structure on the Fermi surface.