Acoustic field excited by a pulsed laser line source in a cylinder

The excitation and propagation of the acoustic waves in an elastic cylinder are studied by laser ultrasonics both theoretically and experimentally. The theoretical analysis of the two-dimensional acoustic field excited by a pulsed laser line source impacting on the generatrix of an elastic cylinder is presented. The dispersive properties for both cylindrical Rayleigh wave and the higher modes--whispering gallery (WG) modes are analyzed in detail. The numerical transient displacement waveforms for a detecting point located another terminal of the cylinder diameter opposite the source are calculated. The experimental excitation and detection of the acoustic waves in an aluminum cylinder are carried out on a laser ultrasonic system, which mainly consists of a Q-switched Nd:YAG laser and a laser interferometer. The wave components of bulk waves and surface waves (cylindrical Rayleigh waves and WG modes) are analyzed by comparing the numerical and experimental waveforms. The results are in good agreement.     

Analysis of scattering wave for a conducting cylinder coated with eccentric plasma

Object coated with plasma has stimulated great interests of many people because of its stealth capability. The study on a conducting cylinder coated with coaxial plasma is very much, but there are little works on a conducting cylinder coated with eccentric plasma. In this article, a model for a conducting cylinder coated with eccentric unmagnetized plasma is set up, the scattering cross section of the object cylinder is studied by adopting the superposition of cylindrical wave functions and the coordinate transformation, where these wave functions are the solutions of Maxwell's equations with boundary conditions in cylindrical coordinates. The results show that the radar cross section for a conducting cylinder coated with eccentric plasma in every direction decrease obviously with an increase of the distance between two eccentric axes, but is almost not impacted by electron–neutral collision frequency of plasma, and the backscattering cross section of the target reduce with the increase of electron density. Comparing with the coaxial model, the backscattering cross section of the eccentric model has a smaller value in a wide frequency band. This is of significance for the target plasma stealth technology in practice.     

Analysis of electromagnetic field due to a buried coated PEMC circular cylinder

An analytical solution for the scattering of an electromagnetic plane wave from a coated perfect electromagnetic conducting (PEMC) circular cylinder, buried in the dielectric half space, is presented. Scattering characteristics of a buried PEMC cylinder when coated by double-positive (DPS) or double-negative (DNG) materials is investigated. The cylinder as well as coating layer is of infinite length (2-D problem). Plane wave spectral representations of the fields have been used to solve the problem. Saddle point method is used to solve the integral arising in the analysis. All the multiple interactions between the buried geometry and the dielectric interface separating the two half spaces have been considered in the analysis. The derivation includes both TM and TE polarization cases. It is observed that the response of the coated PEMC cylinder can be used to detect the underground pipes and other buried objects having a cylindrical shape.     

Laser Generation of Surface Waves on Cylinder with a Slow Coating

An analytical model of acoustic field excited by a pulsed-laser line source on a coated cylinder is presented. Surface wave dispersive behaviours for a cylinder with a slow coating are analysed and compared with that of a bare cylinder. Based on this analysis, the laser-generated transient response of the perturbed Rayleigh wave and the higher modes of steel cylinder with a zinc coating are calculated from the model using residue theory and FFT technique. The theoretical result from the superposed waveform of the perturbed Rayleigh wave and higher modes agree well with the waveform obtained in experiment. The results show that the model and numerical method provide a useful technique for quantitatively characterizing coating parameters of coated cylinder by the laser generated surface waves.     

Properties of surface waves in an elastic cylinder filled with a liquid

The properties of harmonic surface waves in an elastic cylinder filled with a liquid are studied. The case of elastic material for which the shear wave velocity is higher than the sound velocity in a liquid is considered. The wave motion is described based on the complete system of equations of the dynamic theory of elasticity and the equation of motion of an ideal compressible liquid. The asymptotic analysis of the dispersion equation in the region of large wave numbers and qualitative analysis of the dispersion spectrum showed that in such a waveguiding system there exist two surface waves, the Stoneley and the Rayleigh waves. The lowest normal wave forms the Stoneley wave on the internal surface of the cylinder. In this waveguide phase, velocities of all normal waves, except for the lowest one, have the velocity of sound in the liquid as their limit. Therefore, the Rayleigh wave on the external surface of the cylinder is formed by all normal waves in the range of frequencies and wave numbers in which phase velocities of normal waves of the composite waveguide and the lowest normal wave of the elastic hollow cylinder coincide.     

Dynamic viscoelastic effects on sound wave scattering by an eccentric compound circular cylinder

The classical method of separation of variables in conjunction with the translational addition theorem for cylindrical wave functions are employed to obtain an exact solution for two-dimensional interaction of a harmonic plane acoustic wave with an infinitely long (visco)elastic circular cylinder which is eccentrically coated by another (visco)elastic material and is submerged in an ideal unbounded acoustic medium. The novel features of Havriliak-Negami model for dynamic viscoelastic material behaviour are used to take the rheological properties of the coating (and/or core) material into consideration. The analytical results are illustrated with numerical examples in which a steel rod eccentrically coated with (an eccentric steel shell filled with) dissipative materials of distinct viscoelastic properties is insonified by plane sound waves at selected angles of incidence. The effects of incident wave frequency, angle of incidence, core eccentricity and dynamic viscoelastic material properties on the backscattered form function spectra are examined. Limiting cases are considered and fair agreements with available solutions are obtained.     

Scattering from a coated nihility circular cylinder placed in chiral metamaterial

The scattering of electromagnetic plane wave from a coated nihility circular cylinder placed in chiral metamaterial is investigated. The nihility cylinder is coated with chiral or chiral-nihility metamaterial and the medium hosting the coated cylinder is also considered as chiral or chiral-nihility metamaterial. The vector wave equation is used to find out the solution for the fields scattered from the concentric chiral ciruclar cylinders immersed in chiral metamaterial. Inner chiral cylinder is reduced to nihility cylinder taking permittivity and permeability approaching to zero with chirality parameter equal to zero. Coated perfect electric conductor (PEC)/perfect magnetic conductor (PMC) are obtained by taking very large value of permittivity/permeability of the inner cylinder. Numerical results for fields reflected from coated nihility cylinder are compared with those obtained for coated PEC/PMC cylinder. Our results for the special case of dielectric coated nihility/PEC cylinders in free space are shown to be in agreement with already published results thus validating the scheme of analysis.     

Backscattering enhancements from Rayleigh waves on the flat face of a tilted solid cylinder in water

When the face of a finite solid elastic cylinder is ensonified by an acoustic wave, a variety of backscattering contributions associated with acoustic wave coupling into elastic waves are observed. A significant backscattering enhancement is observed for tilts such that the acoustic wave is incident on the face of the cylinder in the vicinity of the coupling angle for launching Rayleigh waves across the face. The observed backscattering indicates that the Rayleigh waves are reflected at the edge of the face and subsequently radiate acoustic waves in the backscattering direction. The measured backscattering is compared to an approximate theoretical prediction. Approximating the focusing of the Rayleigh wave after reflection at the (circular) edge by a Gaussian beam pressure distribution on the cylinder's face yields simple expressions for the amplitude which are consistent with the measurements. In the vicinity of end-on incidence, other backscattering contributions due to the reflection of waves traveling down the length of the cylinder are observed. There is also evidence of a face-traversing longitudinal wave for slightly tilted cylinders.     

Damped waves in a cylinder shadow

The sound field in the region of a deep shadow behind an impedance cylinder is analyzed for the case of plane wave diffraction by the cylinder surface. The main part of the field is represented by a cylindrical wave that has a complex index determined from the boundary conditions and decays with the angular coordinate. An expression for the amplitude of this wave is determined by extracting it from the total field formed in the shadow region. It is demonstrated that this wave approximates more closely the total field behind the cylinder, as compared to the least damped wave in the field representation obtained on the basis of the Watson transform. A way to improve the sound barriers is indicated.     

Electromagnetic beam wave scattering by arbitrary cross-sectional conducting cylinder using N circular cylindrical models

Rigorous expression of the electromagnetic beam wave scattering by N circular cylindrical models is described. To check this method, comparison between exact solution and this model composed of N=24 circular cylinders is presented for a single circular conducting cylinder. Numerical results of conducting square cylinder has been also checked with well-known result (B.E.M).     

Simulation on laser-induced surface acoustic wave on isotropic cylinders by finite element method

Based on the thermoelastic theory, a finite element model is developed to simulate the process of laser inducing ultrasonic field in isotropic cylinders, which can take the temperature dependence of thermal parameters into account. Using the finite element model, we have simulated the ultrasonic fields induced by a pulse laser line source impacting on the generatrix of aluminum cylinders with different diameters. And the intact waveforms of surface acoustic wave (SAW including cylindrical Rayleigh and Whispering gallery (WG) modes) are presented, which are in very good agreement with the calculated and experimental waveforms in other literatures. Furthermore, the dispersion properties of cylindrical Rayleigh waves are analyzed by the method of phase spectral analysis, and the results show that with the increasing frequency, the phase velocity of cylindrical Rayleigh wave rapidly increases to the maximum value, and then gradually decreases to that of plane Rayleigh wave. With the diameter of cylinder decreasing, the maximum value of phase velocity and the corresponding frequency increase.     

Laser-induced circumferential waves on hollow cylinder and their interaction with defects by finite element method

A three dimensional (3-D) finite element model for simulating laser induced circumferential wave on a hollow cylinder is developed based on the thermoelastical mechanism, which can take any laser source into account and simulate the interactions between circumferential wave and defects in the hollow cylinder. The model is verified by a control calculation. The results show that the waveforms of circumferential wave are in very good agreement with those available in literature, not only on the arrival time and shape but also on the amplitudes of A ₀, S ₀ and A₁ modes. Using the model, circumferential waves on the surfaces of two series hollow cylinders are simulated, one with same thickness but different outer radius, and the other with the same outer radius but different thickness. The results show that a new mode appears in circumferential wave, compared with Lamb wave in plate. With increase of thickness or radius, the amplitude of the new mode reduces. Another conclusion is that with increase of the thickness of the hollow cylinder, the circumferential wave evolves gradually to the cylindrical Rayleigh waveform, which results from the attenuation of the coupling effect between the outer and inner surface. Moreover, the circumferential waves generated on a hollow cylinder with a surface defect are also simulated, and the results indicate that in the circumferential waves obtained at the point beyond the defect, the amplitude of A ₀ mode decreases and its dispersion enhances. More importantly, a new bipolar waveform corresponding to the interaction of S ₀ mode with the defect appears, its amplitude is larger than three times of that of S ₀ mode. As a result, we consider that the new bipolar waveform will be the optimal feature to nondestructively detect the surface defect on the hollow cylinder.     

Scattering characteristics of conducting cylinder coated with nonuniform magnetized ferrite

An analytical technique, referred to as the scattering matrix method （SMM）, is developed to analyse the scattering of a planar wave from a conductolution for the nonuniform fering cylinder coated with nonuniform magnetized ferrite. The SMM srite coating can be reduced to the expressions for the scattering and penetrated coefficients in four particular cases： nonuniform magnetized ferrite cylinder, uniform magnetized ferrite-coated conducting cylinder, uniform ferrite cylinder as well as homogeneous dielectric-coated conducting cylinder. The resonant condition for the nonuniform ferrite coating is obtained. The distinctive differences in scattering between the nonuniform ferrite coating and the nonuniform dielectric coating are demonstrated. The effects of applied magnetic fields and wave frequencies on the scattering characteristics for two types of the linear profiles are revealed.     

Measurement of cylindrical Rayleigh surface waves using line-focused PVDF transducers and defocusing measurement method

Line-focused PVDF transducers and defocusing measurement method are applied in this work to determine the dispersion curve of the Rayleigh-like surface waves propagating along the circumferential direction of a solid cylinder. Conventional waveform processing method has been modified to cope with the non-linear relationship between phase angle of wave interference and defocusing distance induced by a cylindrically curved surface. A cross correlation method is proposed to accurately extract the cylindrical Rayleigh wave velocity from measured data. Experiments have been carried out on one stainless steel and one glass cylinders. The experimentally obtained dispersion curves are in very good agreement with their theoretical counterparts. Variation of cylindrical Rayleigh wave velocity due to the cylindrical curvature is quantitatively verified using this new method. Other potential applications of this measurement method for cylindrical samples will be addressed.     

Diffraction of sound by an elastic cylinder near the surface of an elastic halfspace

Diffraction of an acoustic wave by an elastic cylinder near the surface of an elastic halfspace is considered. The solution relies on a Helmholtz-type integral equation and uses the Green function of an elastic halfspace. The latter function is represented in the form of an integral over the Sommerfeld contour on the plane of a complex variable that has the meaning of the angle of the wave incidence on the halfspace boundary. An integral equation for the sound pressure distribution over the cylinder surface is derived. This equation is reduced to an infinite system of equations for the Fourier-series expansion coefficients of this distribution. The results obtained are valid for the diffraction of a cylindrical wave and a plane wave. They also describe the diffraction of a spherical wave when the transmitter and receiver are far from the cylinder and lie in one plane that is orthogonal to the cylinder axis.     

Analysis of the field diffracted by a cylinder with a perforated coating

The direct and inverse problems of plane wave diffraction by a circular cylinder with a perforated coating are investigated. In the context of the direct problem, it is shown that a coated cylinder causes a more intense diffraction field than that produced by a smooth cylinder. In the context of the inverse problem, the parameters of the perforated coating are chosen so as to ensure a given level of suppression for the field diffracted by the cylinder.     

Radiation force and torque on a two-dimensional circular cross-section of a non-viscous eccentric layered compressible cylinder in acoustical standing waves

The purpose of this study is to develop an analytical formalism and derive series expansions for the time-averaged force and torque exerted on a compound coated compressible liquid-like cylinder,insonified by acoustic standing waves having an arbitrary angle of incidence in the polar(transverse)plane.The host medium of wave propagation and the eccentric liquid-like cylinder are non-viscous.Numerical computations illustrate the theoretical analysis with particular emphases on the eccentricity of the cylinder,the angle of incidence and the dimensionless size parameters of the inner and coating cylindrical fluid materials.The method to derive the acoustical scattering,and radiation force and torque components conjointly uses modal matching with the addition theorem,which adequately account for the multiple wave interaction effects between the layer and core fluid materials.The results demonstrate that longitudinal and lateral radiation force components arise.Moreover,an axial radiation torque component is quantified and computed for the non-absorptive compound cylinder,arising from geometrical asymmetry considerations as the eccentricity increases.The computational results reveal the emergence of neutral,positive,and negative radiation force and torque depending on the size parameter of the cylinder,the eccentricity,and the angle of incidence of the insonifying field.Moreover,based on the law of energy conservation applied to scattering,numerical verification is accomplished by computing the extinction/scattering energy efficiency.The results may find some related applications in fluid dynamics,particle trapping,mixing and manipulation using acoustical standing waves.     

Natural convection heat transfer coefficients for a horizontal cylinder with vertically attached circular fins

Experiments were performed to investigate the natural convection heat transfer characteristics of a vertically finned horizontal isothermal cylinder. The apparatus was designed so that the fin spacing, fin length, and the cylinder Rayleigh number could be varied within limits of practical interest. The Rayleigh number (based on the cylinder diameter) ranged from 10⁵ to 5 × 10⁷. It was found that the interaction of the fin boundary layer with the cylinder brought about a reduction of the cylinder Nusselt number relative to that for the classical case of the long isolated horizontal cylinder. The reduction was strong at Rayleigh numbers below the critical value and at spacing ratios less than 0.125. However, at Rayleigh numbers beyond the critical, the Nusselt number was quite insensitive to the fin spacing and length, with the typical data spread being in the 5–8% range.     

Average scattered field from a random PEC cylinder buried below a slightly rough surface

Scattering from a perfect electric conducting cylinder with random radius buried below a half space dielectric homogenous interface is studied. The cylindrical wave scattered by cylinder is expanded in terms of plane wave spectrum. Small perturbation method is used to study the interaction of each plane wave with the interface. The zeroth order term yields solution for a flat interface, whereas scattering from a rough surface is given by first-order term. Results are obtained for both TM and TE polarizations. Analytical expressions of the average scattered field are obtained and verified using numerical evaluation. Different scattering scenarios are simulated by varying the distribution of the radius. It is observed that average scattering cross section of an ensemble with normal/uniform distribution is almost equal to that of a cylinder with mean radius.     

Electromagnetic scattering from a perfect electromagnetic conductor circular cylinder coated with a metamaterial having negative permittivity and/or permeability

Electromagnetic scattering of an incident uniform plane wave from a perfect electromagnetic conductor (PEMC) circular cylinder, coated with a metamaterial is investigated theoretically. In the analysis the coating layer may be double-positive (DPS), double-negative (DNG), epsilon-negative (ENG) or mu-negative (MNG). It is assumed that both PEMC cylinder and the coating layer are infinite along the cylinder axis. Both parallel and perpendicular polarization cases are considered for the analysis. Comparison between the monostatic and bistatic echo widths, of a PEMC cylinder coated with metamaterial and coated with ordinary dielectric material (DPS), is presented. The numerical results are compared with the published literature, and comparison is found to be in good agreement.