Design of ring resonator based all optical switch for logic and arithmetic operations – A theoretical study

In this paper, a general analysis for non-linear micro-ring resonator as all optical switch is discussed in a vertically coupled GaAs–AlGaAs micro-ring resonator by carrier injection. The ring resonator is optically pumped, which results in temporal shift of resonant wavelength by refractive index change due to carrier injection. A green laser as optical pump beam is used to shift resonant wavelength 1.5 nm of the ring resonator. Simulation, analysis and overall transfer function of single ring as well as cascaded micro-ring resonator (MRR) is studied. A single circuit, consisting of three MRRs, capable to perform all the two input sixteen logic operations is studied and reported. The same circuit can also act as half adder/subtractor and single bit data comparator.     

High sensitivity and ultra-compact optical biosensor for detection of UREA concentration

In this paper, we suggest two-dimensional photonic crystal based biosensors for measurement of urea concentration in urine by means of refractive index detecting. In case of variation of urea concentration in urine, both the output peak intensity and the resonant peak center wavelength will shift. Two different structure dimensions are used to analyze the sensing characteristics of urine. The first sensor consists of a novel square ring joined to a simple waveguide with rods in air configuration. The second sensor is schemed by use of two-dimensional photonic crystals based on air hole in slab with elliptical resonant cavity in the middle of a photonic crystal waveguide. To realize sensing in both cases, we fill air area by urine sample. A high sensitivity is observed in small structures. In addition, we demonstrated a high quality factor, which is superior to those reported in recently published work discussing urine components based on photonic crystal, with small size sensors and fast response times.     

Proposal of the nano-sensing device and system using a nano-waveguide transducer for distributed sensors

We propose a new concept of a distributed sensing system using a nano-waveguide and an array waveguide. The small change in physical quantity affects the change in device parameters such as refractive index or length, which is relatively absorbed and observed by the resonant wavelength. In principle, the dense wavelength separation is generated by using a soliton pulse propagating within a ring resonator system, whereas a resonant signal can be stored within the nano-waveguide, i.e. a transducer, which is formed by the sensing device. Induced change in the resonant signal at each wavelength occurs, and can be detected by using the optical spectrum analyzer. Such a proposed device is suitable to perform the measurements in the nano-scale regime such as force, stress and temperature. Moreover, the distributed or multiplexed sensing applications are also available using the nano-waveguide sensing device incorporating the array waveguide, which is discussed in details. Quantum measurement using the same system is also described.     

高下路空气孔型光子晶体环形谐振腔的设计

提出一种基于二维正方晶格光子晶体空气孔型高下路效率的环形谐振腔,通过压缩线缺陷波导的宽度实现单模有效控制,同时讨论内围光子晶体列数对传输场的影响,然后运用二维时域有限差分方法数值分析了耦合强度及环区局部折射率调制对下路效率、品质因子以及下路波长等参量的影响.结果表明:当波导宽度为0.7个晶格常量,耦合强度为0个晶格常量,在信道波长为1 528.1nm时,下路效率为99%,品质因子Q为379;当耦合强度提高到1个晶格常量,下路波长稍微漂移为1 524.3nm,品质因子显著提高到1 397,而下路效率下降为89%.同时,下路波长会随着环区折射率的增加呈线性红移.     

高下路空气孔型光子晶体环形谐振腔的设计

提出一种基于二维正方晶格光子晶体空气孔型高下路效率的环形谐振腔,通过压缩线缺陷波导的宽度实现单模有效控制,同时讨论内围光子晶体列数对传输场的影响,然后运用二维时域有限差分方法数值分析了耦合强度及环区局部折射率调制对下路效率、品质因子以及下路波长等参量的影响.结果表明:当波导宽度为0.7个晶格常量,耦合强度为0个晶格常量,在信道波长为1 528.1 nm时,下路效率为99%,品质因子Q为379;当耦合强度提高到1个晶格常量,下路波长稍微漂移为1 524.3 nm,品质因子显著提高到1 397,而下路效率下降为89%.同时,下路波长会随着环区折射率的增加呈线性红移.     

Study and investigation of long period grating as refractive index sensor

In this paper, we have investigated the response of long period grating (LPG) as refractive index sensor. The response has been studied for refractive index variation ranging from 1 to 1.45. In this work, we found that the sensing mechanism is based on two different aspects. First is the change of coupling power from the guided core mode to other co-propagating cladding modes and second is the wavelength shift of the peak resonant wavelengths from their original positions due the change of refractive index of the environmental (external) medium surrounding the cladding of the grating.     

带多孔硅表面缺陷腔的半无限光子晶体Tamm态及其折射率传感机理

结合表面缺陷半无限光子晶体Tamm态与多孔硅光学传感机理,在光子晶体表面缺陷腔中引入多孔硅,并利用其高效的承载机制,提出基于多孔硅表面缺陷光子晶体Tamm态的折射率传感结构.在半无限光子晶体中缺陷腔与原来的周期性分层介质结构的界面上存在Tamm态,通过入射角度调制使其在缺陷腔中实现多次全反射,并在缺陷腔中加入吸收介质,使谐振波长在缺陷腔中完成衰荡,从而在反射谱中得到缺陷峰;调整光子晶体参数,使缺陷峰的半高全宽得到优化,提高其品质因数(Q值);在此基础上,根据Goos-H?nchen相位移与谐振波长的关系,建立由待测样本折射率改变所导致的多孔硅表面吸附层有效折射率变化与缺陷峰值波长漂移之间的关系模型,并分析其折射率传感特性.结果表明,此生物传感结构Q值为1429,灵敏度为546.67 nm/RIU,证明了该传感结构的有效性,可为高Q值和高灵敏度折射率传感器的设计提供一定的理论参考.     

基于表面等离子体共振和定向耦合的D形光子晶体光纤折射率和温度传感器

利用光子晶体光纤结构的灵活性和性能的优越性, 设计了一种基于D形光子晶体光纤的折射率和温度传感器. 在D形光子晶体光纤表面抛磨并镀上金纳米薄膜, 作为表面等离子体共振传感通道用来测量液体折射率; 在包层的一个空气孔中填充温敏液体甲苯, 作为定向耦合通道实现对温度的测量. 进一步的数值计算发现, 基于定向耦合效应的温度传感和基于表面等离子体共振的折射率传感相互独立, D形光子晶体光纤同时进行折射率和温度传感检测. 在各向异性的完美匹配层边界条件下利用全矢量有限元法对该传感器特性进行了数值研究, 发现D形光子晶体光纤的空气孔直径决定了定向耦合吸收峰的中心波长和温度传感的灵敏度, 金薄膜的厚度和D形结构的抛磨深度仅影响表面等离子体共振峰的相对强度. 结果表明: 该传感器在-10–80 ℃的温度范围内具有11.6 nm/℃的温度灵敏度, 在1.34–1.44折射率范围内折射率灵敏度最高可达26000 nm/RIU.     

基于十字连通形环形谐振腔金属-介质-金属波导的折射率传感器和滤波器

提出了由十字连通形环形谐振腔耦合两个金属-介质-金属(metal-insulator-metal, MIM)波导的结构,并用有限元法数值研究了表面等离极化激元在结构中的传输特性.通过对透射谱的研究,系统地分析了MIM结构的传感特性.结果表明,在透射光谱中有三个共振峰,即存在三种共振模式,其中透射峰与材料的折射率呈线性关系.通过对结构参数的优化,得到了折射率灵敏度(S)高达1500 nm/RIU的理论值,相应的传感分辨率为1.33×10~(-4)RIU.更重要的是,灵敏度不受结构参数变化的影响,这意味着传感器的灵敏度不受制造偏差的影响.此外,谐振波长与环形腔中心半径成线性关系,该器件在较大波长范围内实现可调谐带通滤波.透射强度随着波导与环形腔间距的增大而减小,透射带宽同时减小,因此,可以通过控制环形腔与波导的耦合距离来调谐透射强度及透射带宽.研究结果对高灵敏度纳米级折射率传感器和带通滤波器的设计以及在生物传感器方面的应用都具有一定的指导意义.     

Terahertz wave switch based on photonic crystal ring resonators

In this paper, we have presented a compact and integrated terahertz wave switch design based on photonic crystal ring resonators. The photonic crystal structure with square lattice is investigated and applied for design of ring resonators. The switching mechanism of this novel switch is based on the variation of the resonant frequency of the ring resonator inserted between two parallel waveguides. The refractive index of the holes of the structure filled with polyaniline electrorheological fluids are varied by applied external electric field, the result of which is the variation of the ring resonant frequency. The proposed device is analyzed by using finite difference time domain method. Numerical simulation results show that this switch has high extinction ratio, small size, low voltage and advantages of selectivity of coupling THz wave to different output ports.     

Vertical input optical ring resonator with differential operation for optical sensor

A novel waveguide ring resonator optical sensor with two resonant wavelength channels is proposed for a refractive index measurement of a test sample placed on the sensor substrate and its performance characteristics are investigated analytically and numerically. The waveguide device consists of a ring resonator, a split-ring-shaped loop waveguide, and a vertical input/output grating coupler, in which the loop waveguide acts as an additional resonator and provides another output wavelength channel of the sensor. The differential detection between the two wavelength channels enables the highly sensitive detection with temperature compensation. A numerical simulation based on a finite difference time domain (FDTD) method shows that a precise index change detection with a resolution of 10⁻⁶ can be achieved using of the proposed device.     

平面环形谐振腔微光学陀螺结构设计与优化

提出具有高群有效折射率的双环级联作为核心元件的谐振式平面光波导陀螺结构, 基于光学Sagnac原理得到了双微环耦合谐振式光学陀螺理论灵敏度与群有效折射率的一般表达式和双环与单环陀螺系统的灵敏度关系, 并由耦合模理论方法得到了双环系统耦合器的两个透射系数对应的群有效折射率变化情况. 在环腔半径R₁=R₂=100 μm、环腔传输损耗系数t₁=t₂=0.95的情况下, 针对环与环之间耦合器和环与波导之间耦合器透射系数对群有效折射率的不同影响, 得到了最大群有效折射率的产生条件. 采用文中参数(R=100 μm, t=0.95)计算的单环谐振式陀螺灵敏度为(10⁴-10⁵)°/h, 而双环级联谐振系统理论灵敏度能够达到10 °/h. 该研究对微环耦合谐振腔在角速度检测上的应用有重要的意义.     

Zero dispersion wavelength and dispersion slope control of hollow-core photonic bandgap fibres

This paper investigates the zero dispersion wavelength and dispersion slope control of hollow-core photonic bandgap fibres (PBGFs) by using a full-vector finite element method. By simulation we found that theoretically the zero dispersion wavelength can be tailored by respectively changing the rounded diameter of air holes, pitch, refractive index, normalized thickness of core rings, and hole diameter to pitch ratio. At the same time the tailoring of dispersion slope can also be realized by changing the rounded diameter of air holes or pitch or normalized thickness of core rings. To illustrate the reasonability of fibre designs, this paper also gives the variance of normalized interface field intensity which measures the scattering loss relatively versus wavelength for different designs. From the viewpoint of loss, varying the rounded diameter and the thickness of core ring could shift zero wavelength but it is difficult to get the required parameters within so tiny range in practical drawing of PBGFs, on the other hand, it is possible in practice to respectively alter the pitch and refractive index to shift zero wavelength. But varying hole diameter to pitch ratio is not worthwhile because they each induce large increase of loss and narrowness of transmission bandwidth. The zero dispersion wavelength can be engineered by respectively varying the rounded diameter of air holes, pitch, refractive index, and normalized thickness of core rings without incurring large loss penalties.     

一种基于金刚石多层波导结构微环谐振器的仿真分析

提出了一种以金刚石新型材料为芯层的单微环谐振器模型.谐振器的纵切面采用五层脊形波导结构,中间一层设定为金刚石,上下两侧分别是SiO_2和As_2S_3,即As_2S_3-SiO_2-金刚石-SiO_2-As_2S_3.设置操作波长为1550 nm,依据耦合膜理论和微环谐振理论,利用Comsol软件仿真模拟了单直波导纵切面、直波导和环形波导耦合区的纵切面以及微环在谐振波长为1543 nm时的场强分布,及直波导和环形波导耦合区间距改变时微环的场强分布和传输特性.在此基础上,依据传输矩阵法讨论了微环的品质因数、耦合系数变化对输出光谱的影响,并对微环损耗进行了讨论.结果表明:以金刚石为芯层的微环谐振器具有良好的光学特性,本结构在谐振波长为1543 nm时谐振峰值达到了-12 dB以上,品质因数达到了1.54×10~5,在耦合系数为0.01时,自由光谱范围约为40 nm.     

基于SM-NCF反射光谱辨识的液体折射率监测方法

针对分子生物学与环境监测领域高灵敏度特异性检测需求,提出一种基于反射光谱特征辨识的单端反射式光纤折射率传感器模型,并给出了这种基于多模干涉原理的单模光纤-无芯光纤(Single mode fiber-No core fiber, SM-NCF)串接结构传感机理及其理论模型。无芯光纤实质上是一种结构特殊的多模光纤,在实际应用中无芯光纤结构本身作为纤芯,外界环境介质当作包层,构成光波导结构。这与普通多模光纤相比,不需要采用氢氟酸对多模光纤的包层进行化学腐蚀,不会降低光纤的机械性能,也不会破坏芯模传输条件,可以更好的实现对周围环境折射率的传感监测。当无芯光纤所处外界环境折射率发生改变时,其波导结构和包层有效折射率均会发生改变,从而引起传输光信号的纵向传播常数和模场分布也会随之发生改变,最终导致不同波长对应传输光功率的变化。上述效应反映在反射光谱上,即干涉波谷对应的谐振波长、波谷峰值强度以及半波宽度发生相应变化,通过辨识该反射光谱特征就可实现对外界环境折射率的测量。借助光束传播法(BPM),数值模拟得到无芯光纤长度分别为自映像距离和非自映像距离时的SM-NCF内部光场能量分布规律,并制作了无芯光纤长度分别为自映像距离和非自映像距离的SM-NCF光纤折射率传感探头,将作为传感区域的无芯光纤一端与标准单模光纤熔接,采用磁控溅射技术在无芯光纤另一端面镀上金膜,用以提升反射光谱强度。在此基础上,搭建了基于SM-NCF终端反射型的光纤折射率试验系统,并开展了相关实验研究。研究结果表明,当无芯光纤长度是15 mm(自映像距离)时,随着液体折射率从1.331 5依次增大至1.390 2,SM-NCF反射光谱逐渐向长波方向偏移,其反射峰谐振波长对应的折射率灵敏度约为197.57 nm·RIU-1,相关系数为0.93;反射峰值强度也呈现逐渐降低趋势,其折射率灵敏度约为-62.80 dB·RIU-1。当无芯光纤长度是20 mm(非自映像距离)时,随着液体折射率依次增大,SM-NCF反射光谱呈现明显双峰现象,且均逐渐向长波方向偏移,dip2谐振峰波长折射率灵敏度约为133 nm·RIU-1,相关系数为0.96;反射峰值强度也呈现逐渐降低趋势,其折射率灵敏度约为-31.66 dB·RIU-1。对比分析可知,不论是从反射峰谐振波长偏移的角度,还是从反射峰值强度的角度,自映像距离长度对应的 SM-NCF终端反射型光纤传感器均具有较高灵敏度。对于相同折射率液体环境,非自映像距离长度对应的SM-NCF反射光谱半波宽度与自映像距离长度相比,呈现显著变窄趋势。相对于SMS透射型传感结构,当传感区域长度相同时,SM-NCF反射型结构能够实现对光波信号的往返两次调节。这种终端反射型SM-NCF传感器改进了传统透射型折射率传感器不便与待测液体相接触的缺点,具有结构简单、易于制作、抗电磁干扰能力强以及便于远程遥测等优点,能够为后续生化与环保监测领域研究应用提供有益支持。     

Liquid refractive index sensor with three-cascaded microchannels in single-mode fiber fabricated by femtosecond laser-induced water breakdown

Liquid refractive index sensor with three-cascaded microchannels in single-mode fiber was fabricated by femtosecond laser-induced water breakdown. When the liquid is filled in three microchannels across the fiber core, the transmission spectrum of the sensor shows interference peaks. The refractive index of liquid can be sensed accurately based on both the wavelength shift and loss change of interference peaks. The refractive index sensitivities of wavelength shift and loss change reach to as high as ?2,406.1 nm/RIU and ?156.8 dB/RIU, respectively. The sensor is insensitive to the refractive index change of liquid caused by environmental temperature. It can be used for liquid refractive index sensing with high sensitivity, especially for water pollution monitoring.     

基于新型三环谐振器的诱导透明效应分析

针对谐振式微腔的应用需求, 提出了一种新型三环谐振式微腔结构, 类似于原子系统中的电磁诱导透明, 耦合诱导透明(CRIT)效应在一个新的光学微腔系统中已被实验证明. 该结构在硅基上由三个尺寸完全一样的微环腔组成, 通过理论分析、制备和实验测试, 能够观察到CRIT现象, 其频谱具有低群速的狭窄透明峰, 与光栅耦合器的耦合效率为34%, 并且谐振器的品质因数达到了0.65×10⁵, 同时, 失谐的谐振波长可以通过温度变化来控制, 这在旋转传感、光滤波器、光存储器等方面的应用有重要意义.     

Ultracompact biochemical sensor built with two-dimensional photonic crystal microcavity

We report an experimental demonstration of an ultracompact biochemical sensor based on a two-dimensional photonic crystal microcavity. The microcavity, fabricated on a silicon-on-insulator substrate, is designed to have a resonant wavelength (lambda) near 1.5 microm. The transmission spectrum of the sensor is measured with different ambient refractive indices ranging from n = 1.0 to n = 1.5. From observation of the shift in resonant wavelength, a change in ambient refractive index of delta(n) = 0.002 is readily apparent. The correspondence between absolute refractive index and resonant wavelength agrees with numerical calculation to within 4% accuracy. The evaporation of water in a 5% glycerol mixture is also used to demonstrate the capability for in situ time-resolved sensing.     

Planar waveguide-coupled, high-index-contrast, high-Q resonators in chalcogenide glass for sensing

High-index-contrast compact microdisk resonators in thermally evaporated As2S3 and Ge17Sb12S71 chalcogenide glass films are designed and fabricated using standard UV lithography and characterized. Our pulley coupler configuration demonstrates coupling of the resonators to monolithically integrated photonic wire waveguides without resorting to demanding fine-line lithography. Microdisk resonators in As2S3 support whispering-gallery-mode with cavity quality factors (Q) exceeding 2 x 10(5), the highest Q value reported in resonator structures in chalcogenide glasses to the best of our knowledge. We have successfully demonstrated a lab-on-a-chip prototype sensor device with the integration of our resonator with planar microfluidic systems. The sensor shows a refractive index sensitivity of 182 nm/RIU (refractive index unit) and a wavelength resolution of 0.1 pm through a resonant peak fit. This corresponds to a refractive index detection limit of 8 x 10(-7) RIU at 1550 nm in wavelength, which could be further improved by shifting the operating wavelength to a region where water absorption is reduced.     

基于包层模的光纤布拉格光栅折射率传感特性

提出了基于光纤布拉格光栅(FBG)包层模式的折射率传感方案。实验中,利用不同浓度的丙三醇水溶液作为外界折射率传感溶液,采用氢氟酸溶液化学腐蚀的方法来减小光纤包层的直径以增大包层模式对外界折射率的敏感度,研究了腐蚀后光纤布拉格光栅包层模式的耦合波长对外部折射率的变化关系。实验结果表明在1.3300~1.4584的折射率范围内,包层模式耦合波长随外界折射率增大而增大,在接近光纤包层折射率处具有很高的折射率灵敏度,最大达到了172 nm/riu(refractive index unit)。而且,包层模谐振的光谱半峰全宽(约0.07 nm)仅为布拉格纤芯模谐振光谱半峰全宽的1/4,能够获得更好的传感精度。