Pt-Sn/γ-Al2O3-catalyzed highly efficient direct synthesis of secondary and tertiary amines and imines

Versatile syntheses of secondary and tertiary amines by highly efficient direct N‐alkylation of primary and secondary amines with alcohols or by deaminative self‐coupling of primary amines have been successfully realized by means of a heterogeneous bimetallic Pt–Sn/γ‐Al₂O₃ catalyst (0.5 wt % Pt, Pt/Sn molar ratio=1:3) through a borrowing‐hydrogen strategy. In the presence of oxygen, imines were also efficiently prepared from the tandem reactions of amines with alcohols or between two primary amines. The proposed mechanism reveals that an alcohol or amine substrate is initially dehydrogenated to an aldehyde/ketone or NH‐imine with concomitant formation of a [PtSn] hydride. Condensation of the aldehyde/ketone species or deamination of the NH‐imine intermediate with another molecule of amine forms an N‐substituted imine which is then reduced to a new amine product by the in‐situ generated [PtSn] hydride under a nitrogen atmosphere or remains unchanged as the final product under an oxygen atmosphere. The Pt–Sn/γ‐Al₂O₃ catalyst can be easily recycled without Pt metal leaching and has exhibited very high catalytic activity toward a wide range of amine and alcohol substrates, which suggests potential for application in the direct production of secondary and tertiary amines and N‐substituted imines.     

Acceleration of amine/epoxy reactions with N‐methyl secondary amines

Kinetic studies established that the monomethylation of a primary amine leads to significantly higher reaction rates with glycidyl ethers. The relative rates for approximately 25 amines were determined in an alcohol solvent under pseudo‐first‐order conditions (excess epoxy). The rates were referenced to aniline. For the aliphatic amines, reactivity consistently increased upon going from a primary amine to the corresponding N‐methyl secondary amine. This acceleration effect was not seen for aniline. The enhanced reactivity was also seen in curing systems, both with pure methylated amine curing agents and with complex mixtures obtained from the partial methylation of polyamines. Economically viable partially methylated amine curing agents were obtained by the reductive alkylation of commercial polyamines with formaldehyde and by the reaction of monomethylamine with 3‐(N‐methylamino)propionitrile in the presence of hydrogen and a hydrogenation catalyst. Although actual cure performance is based on a complex combination of several factors, the acceleration due to monomethylation could be a useful tool for enhancing amine/epoxy curing reactions. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 921–930, 2000     

Antimalarials: Synthesis of 4-aminoquinolines that circumvent drug resistance in malaria parasites

The strategies described here have permitted the synthesis of a series of 4-aminoquinoline antimalarials. Substantive improvements over previous syntheses include nucleophilic substitution with neat amine rather than in phenol, regioselective reductive alkylation to convert the terminal primary amine (12a–20a) on the diaminoalkane side chain to a diethylamino group, and purification by column chromatography with basic alumina. The ¹H nmr spectra obtained after regioselective reductive alkylation with sodium borodeuteride (in comparison with sodium borohydride) demonstrated that this reductive alkylation proceeds via formation and subsequent reduction of the corresponding diamides in situ.     

Lewis base assisted Brønsted base catalysis: direct regioselective asymmetric vinylogous alkylation of allylic sulfones

A Lewis base assisted Brønsted base catalysis (LBABB) strategy is applied for direct asymmetric vinylogous alkylation of allylic sulfones with Morita–Baylis–Hillman (MBH) carbonates, in which a strong Brønsted base, tert‐butoxy anion, generated in situ from a tertiary amine catalyst and MBH carbonate, is crucial in activating unstabilized nucleophiles. The γ‐regioselective alkylation products were obtained with good to excellent enantiomeric excess values when catalyzed by a modified cinchona alkaloid.     

Cyclic polyamines <Emphasis Type="BoldItalic">via</Emphasis> a molybdenum(0) templated Mannich-type reaction

Reaction of [Mo(CO)₃(3-azahexane-1,6-diamine)] with formaldehyde and the carbon acid nitroethane leads to cyclisation involving one terminal amine and either the internal secondary amine (minor product) or the other terminal primary amine (major product), with zinc/acid reduction yielding new cyclic tetraamines, also characterised as their cobalt(III) complexes. This is the first example of Mannich-style formation of a pendant-arm triazamacrocycle around a molybdenum(0) template. The unexpected N-(1′-aminopropyl)-6-methyl-1,4-diazacycloheptan-6-amine minor product has been characterised by an X-ray structure as its cis-dichlorocobalt(III) complex.     

Development of a General Non‐Noble Metal Catalyst for the Benign Amination of Alcohols with Amines and Ammonia

The N‐alkylation of amines or ammonia with alcohols is a valuable route for the synthesis of N‐alkyl amines. However, as a potentially clean and economic choice for N‐alkyl amine synthesis, non‐noble metal catalysts with high activity and good selectivity are rarely reported. Normally, they are severely limited due to low activity and poor generality. Herein, a simple NiCuFeO_x catalyst was designed and prepared for the N‐alkylation of ammonia or amines with alcohol or primary amines. N‐alkyl amines with various structures were successfully synthesized in moderate to excellent yields in the absence of organic ligands and bases. Typically, primary amines could be efficiently transformed into secondary amines and N‐heterocyclic compounds, and secondary amines could be N‐alkylated to synthesize tertiary amines. Note that primary and secondary amines could be produced through a one‐pot reaction of ammonia and alcohols. In addition to excellent catalytic performance, the catalyst itself possesses outstanding superiority, that is, it is air and moisture stable. Moreover, the magnetic property of this catalyst makes it easily separable from the reaction mixture and it could be recovered and reused for several runs without obvious deactivation.     

The “Borrowing Hydrogen Strategy” by Supported Ruthenium Hydroxide Catalysts: Synthetic Scope of Symmetrically and Unsymmetrically Substituted Amines

The N‐alkylation of ammonia (or its surrogates, such as urea, NH₄HCO₃, and (NH₄)₂CO₃) and amines with alcohols, including primary and secondary alcohols, was efficiently promoted under anaerobic conditions by the easily prepared and inexpensive supported ruthenium hydroxide catalyst Ru(OH)_x/TiO₂. Various types of symmetrically and unsymmetrically substituted “tertiary” amines could be synthesized by the N‐alkylation of ammonia (or its surrogates) and amines with “primary” alcohols. On the other hand, the N‐alkylation of ammonia surrogates (i.e., urea and NH₄HCO₃) with “secondary” alcohols selectively produced the corresponding symmetrically substituted “secondary” amines, even in the presence of excess amounts of alcohols, which is likely due to the steric hindrance of the secondary alcohols and/or secondary amines produced. Under aerobic conditions, nitriles could be synthesized directly from alcohols and ammonia surrogates. The observed catalysis for the present N‐alkylation reactions was intrinsically heterogeneous, and the retrieved catalyst could be reused without any significant loss of catalytic performance. The present catalytic transformation would proceed through consecutive N‐alkylation reactions, in which alcohols act as alkylating reagents. On the basis of deuterium‐labeling experiments, the formation of the ruthenium dihydride species is suggested during the N‐alkylation reactions.     

Synthesis of Triazolo[1,5‐a]triazin‐7‐one Derivatives and Highly Functionalized [1,2,4]Triazoles

The synthesis of novel triazolo[1,5‐a]triazin‐7‐ones is presented. Starting from 3‐amino‐5‐sulfanyl‐1,2,4‐triazole, the synthetic sequence involved alkylation with benzyl bromide, reaction with p‐nitrophenyl chloroformate followed by treatment with a primary amine, and condensation with diethoxymethyl acetate. Final oxidation of the thioether moiety with 3‐chloroperbenzoic acid provided 2‐(benzylsulfonyl)[1,2,4]triazolo[1,5‐a][1,3,5]triazin‐7‐ones 5a and 5b in good overall yields. Treatment of 5a and 5b with secondary amines provided highly functionalized [1,2,4]triazoles through an unexpected triazinone ring opening. A mechanism for this transformation is proposed.     

Preparation and characterization of novel hyperbranched poly(amido amine)s from Michael addition polymerizations of trifunctional amines with diacrylamides

Novel hyperbranched poly(amido amine)s containing tertiary amines in the backbones and acryl as terminal groups were synthesized via the Michael addition polymerizations of trifunctional amines with twofold molar diacrylamide. The hyperbranched structures of these poly(amido amine)s were verified by ¹³C NMR (INVGATE). The polymerization mechanisms were clarified by following the polymerization process with NMR method, and the results show that the reactivity of secondary amine formed in situ is much lower than that of the secondary amine in 1‐(2‐aminoethyl) piperazine (AEPZ) ring and the primary amine. The secondary amine formed in situ was almost kept out of the reaction before the primary and secondary amines in AEPZ were consumed, leading to the formation of the AB2 intermediate, and the further reaction of the AB2 yielded the hyperbranched polymers. The molecular weights and properties of poly(amindo amine)s obtained were characterized by GPC, DSC, and TGA, respectively. Based on the reaction of active acryl groups in the polymers obtained with glucosamine, hyperbranched polymers containing sugar were formed. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5127–5137, 2005     

Remote Enantioselective Friedel–Crafts Alkylations of Furans through HOMO Activation

Catalytic asymmetric Friedel–Crafts alkylation is a powerful protocol for constructing a chiral C(sp²)? C(sp³) bond. Most previous examples rely on LUMO activation of the electrophiles using chiral catalysts with subsequent attack by electron‐rich arenes. Presented herein is an alternative strategy in which the HOMO of the aromatic π system of 2‐furfuryl ketones is raised through the formation of a formal trienamine species using a chiral primary amine. Exclusive regioselective alkylation at the 5‐position occurred with alkylidenemalononitriles, and high reactivity and excellent enantioselectivity (up to 95 % ee) was obtained by this remote activation.     

Reactions of unsaturated acid halides—IV: Competitive friedel-crafts acylations and alkylations of monohalogenobenzenes by the bifunctional cinnamoyl chloride

Aluminium chloride-catalysed acylations and alkylations of monohalogenobenzenes with cinnamoyl chloride has been studied. Under strictly homogeneous conditions, alkylation was increasingly favoured relative to acylation as the primary reaction along the series: benzene <fluorobenzene<bromobenzene<chlorobenzene. Changing to heterogeneous conditions (excess catalyst with CS₂ as diluent) preserved this order but primary alkylation was relatively enhanced. The addition of nitrobenzene to the homogeneous reaction restrained alkylation more than acylation.Primary acylation may be followed by alkylation giving asymmetrical 1,3,3-triarylpropan-1-ones but the possibility that these are formed by alkylation followed by acylation is ruled out. These ketones may subsequently undergo α,β-ketonic fission.Primary alkylation may be followed by cycliacylation producing 3-arylindan-l-ones with the halogeno substituent at the side-chain aryl group and this observation rules out their alternative mode of formation, cyclialkylation of the primary acylation product.An example of a para → meta bromine shift is discussed.     

Pd/C-catalyzed Reductive Mono-N-alkylation of Nitrophenol Derivatives in One-pot Way

A range of different nitrophenol derivatives were converted in one‐pot to the corresponding secondary alkyl aminophenols in good to excellent yields by using ketones as alkyl source and hydrogen over 10 wt% Pd/C as reducing agent. In all examples, except for one, the secondary amine was the sole alkylation product isolated. When aldehydes were used as alkyl source, the corresponding tertiary amine as a sole alkylation product was isolated.     

CH-Acidität in α-Stellung zum N-Atom in N,N-dialkylamiden mit sterisch geschützter Carbonylgruppe zur nucleophilen minoalkylierung

CH-Acidity in α-position to the N-Atom of N, N -Dialkylamides with Sterically Protected Carbonyl Groups Contribution to the Nucleophilic Amino Alkylation Sterically protected amides 1 such as the 2,4,6-triisopropyl-benzoic acid derivatives 3, 8b and 10 undergo readily H/Li-exchange with s-butyllithium at the CH₃N- or CH₂N-groups. The resulting organolithium compounds (cf. 9, 11 ) are alkylated and hydroxyalkylated with primary haloalkanes, aldehydes, and ketones under chain elongation in the amine position of the amides. The (E/Z)-rotamers of the dialkylamides 7 and 8 are separated by chromatography; the amides 4 – 6 , 12 , and 13 formally derived from β-hydroxyamines are obtained in the (Z)-form only. The configurational (E/Z)-assignments follow from NMR. and IR. data. The erythro and threo configuration of the two diastereomeric amides 12a and 12b are tentatively concluded from Eu(fod)₃-¹H-NMR.-shift experiments. The results strongly suggest that the H/Li-exchange takes place regioselectively at the CH? N group which is in cis-position to the C?O double bond (→ 14 ). The methyl 2,4,6-tri(t-butyl)benzoate ( 18 ) can also be deprotonated to the lithium acyloxymethanide 19 which is trapped by alkylation with 1-iodooctane (→ 20 ). – The steric protection of the carbonyl groups in the products 4 – 8, 10, 12, 13 , and 20 prevents their ready hydrolysis to amines and alcohols, respectively. Therefore, triphenylacetic acid derivatives 21 rather than 2,4,6-triisopropylbenzoic acid derivatives for use in the electrophilic substitution of equation (1) are recommended. The trityl group in 21 may be considered a C-leaving-group (C? C protective group, cf. 22, 23 ). The acetamide 25 reacts readily (→ 26 ) and then with electrophiles to give products 27a – c . As shown in the Table, the amides 27 are cleaved under a variety of conditions with formation of triphenylmethane. LiAlH₄ produces a tertiary amine, CH₃Li a secondary amine, and dissolving alkali metals/naphthalene under aprotic conditions mixtures of secondary amine and its formamide (hydrolysed by acid treatment). Thus the overall process (2) is feasible.     

FT-IR study on CO<Subscript>2</Subscript> adsorbed species of CO<Subscript>2</Subscript> sorbents

The stability of amine-functionalized silica sorbents prepared through the incipient wetness technique with primary, secondary, and tertiary amino organosilanes was investigated. The prepared sorbents were exposed to different gaseous streams including CO₂/N₂, dry CO₂/air with varying concentration, and humid CO₂/air mixtures to demonstrate the effect of the gas conditions on the CO₂ adsorption capacity and the stability of the different amine structures. The primary and secondary amine-functionalized adsorbents exhibited CO₂ sorption capacity, while tertiary amine adsorbent hardly adsorbed any CO₂. The secondary amine adsorbent showed better stability than the primary amine sorbent in all the gas conditions, especially dry conditions. Deactivation species were evaluated using FT-IR spectra, and the presence of urea was confirmed to be the main deactivation product of the primary amine adsorbent under dry condition. Furthermore, it was found that the CO₂ concentration can affect the CO₂ sorption capacity as well as the extent of degradation of sorbents.     

Amine Additives Greatly Expand the Scope of Asymmetric Hydrosilylation of Imines

Slow addition of a primary amine to the reaction mixture greatly increases the scope of the titanium-catalyzed asymmetric reduction of imines 1 . An important added feature of this method is that chiral secondary amines 2 can be obtained in much higher optical purity (up to 99 % ee) than would be predicted from the E:Z ratios of the starting imines 1 .     

Transition‐Metal‐Free Hydrogen Autotransfer: Diastereoselective N‐Alkylation of Amines with Racemic Alcohols

A practical method for the synthesis of α‐chiral amines by alkylation of amines with alcohols in the absence of any transition‐metal catalysts has been developed. Under the co‐catalysis of a ketone and NaOH, racemic secondary alcohols reacted with Ellman's chiral tert‐butanesulfinamide by a hydrogen autotransfer process to afford chiral amines with high diastereoselectivities (up to >99:1). Broad substrate scope and up to a 10 gram scale production of chiral amines were demonstrated. The method was applied to the synthesis of chiral deuterium‐labelled amines with high deuterium incorporation and optical purity, including examples of chiral deuterated drugs. The configuration of amine products is found to be determined solely by the configuration of the chiral tert‐butanesulfinamide regardless of that of alcohols, and this is corroborated by DFT calculations. Further mechanistic studies showed that the reaction is initiated by the ketone catalyst and involves a transition state similar to that proposed for the Meerwein–Ponndorf–Verley (MPV) reduction, and importantly, it is the interaction of the sodium cation of the base with both the nitrogen and oxygen atoms of the sulfinamide moiety that makes feasible, and determines the diastereoselectivity of, the reaction.     

Photostabilizing activity of tertiary hindered amines

The influence of the N-alkyl group of tertiary hindered amines on the photostabilization of polymers was studied. The photostabilizing effects of the tertiary amine derivatives of 4-benzoyloxy-2,2,6,6-tetramethylpiperidine ( 1a ) in polypropylene were compared. All tertiary amine derivatives having α-H to hindered N showed higher effectiveness than 1a . Model liquid phase photoxidations were carried out by irradiating (UV-lamp) the solutions of tertiary hindered amines containing tert-butyl hydroperoxide as a photoinitiator. The tertiary hindered amines were oxidized more easily than corresponding parent hindered amine and converted to the parent amine, which was identified as its salt, resulting from the carboxylic acid produced from the N-alkyl group by oxidation. The thermal reaction of the tertiary hindered amines with tert-butyl hydroperoxide was also studied in the liquid phase. The tertiary hindered amines decomposed tert-butyl hydroperoxide more rapidly than the parent secondary hindered amine, and generated the parent amine. It was also found that the photostabilizing effects of tertiary hindered amines for polyolefins were higher than that of the parent secondary hindered amine.     

Influence of substituents on the kinetics of epoxy/aromatic diamine resin systems

Eleven different epoxy/diamine systems, including tetraglycidyl‐4,4′‐diaminodiphenylmethane (TGDDM), triglycidyl p‐aminophenol (TGAP), and diglycidyl ether of bisphenol A (DGEBA) with 4,4′‐diaminodiphenylsulfone (DDS), diethyltoluenediamine (DETDA), dimethylthiotoluenediamine (DMTDA), and meta‐phenylenediamine (m‐PDA), were studied with near‐infrared spectroscopy at different temperatures. The reactivities of the epoxies were determined and found to be in the following order when reacted with the same amine: DGEBA > TGAP > TGDDM. When the primary amine was reacted with the same epoxy, the order was DETDA > DDS > DMTDA; for the secondary amine, the order was DETDA > DMTDA > DDS. The relative reaction rates of the secondary amine to the primary amine were compared and discussed in terms of the structural differences and the corresponding substitution effect. It was concluded that the increase in the secondary amine reactivity of DETDA and DMTDA was caused by the deconjugation of the benzene‐ring π electrons from the lone pair on the N atom. The overall order of the secondary amine relative reactivity was DMTDA > DETDA > DDS for the same epoxy and TGDDM > TGAP > DGEBA for the same amine. The m‐PDA systems had no significant positive or negative substitution effects. Molecular orbital calculations were performed, and the results showed the most significant deconjugation effect in the secondary amine of DETDA. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3143–3156, 2004     

N‐Silylation of Amines Mediated by Et3SiH/KOtBu

Silylation of primary and secondary amines is reported, using triethylsilane as the silylating reagent in the presence of potassium tert‐butoxide (KO^tBu). The reaction proceeds well in the presence of 0.2 equiv. of KO^tBu. In competition experiments, aniline is selectively silylated over aliphatic amines. Computational studies support a catalytic mechanism which is initiated by KO^tBu interacting with the silane to form KH and silylated amine. The KH then takes over the role of base in the propagation of the cyclic mechanism and deprotonates the amine. This reacts with R₃SiH to afford the product R₃SiNR′R′′ and regenerate KH.     

Density Functional Theory Mechanistic Study of Boron‐Catalyzed N‐Alkylation of Amines with Formic Acid: Formic Acid Activation by Silylation Reaction

New methodology for the alkylation of amines is an intriguing issue in both academia and industry. Recently, several groups reported the metal‐free B(C₆F₅)₃‐catalyzed N‐alkylation of amines, but the mechanistic details of these important reactions are unclear. Herein, a computational study was performed to elucidate the mechanism of the N‐alkylation of amines with formic acid catalyzed by the Lewis acid B(C₆F₅)₃ in the presence of hydrosilane. We found that the reaction started with the activation of formic acid through a novel model. Then, the high electrophilicity of the C center of the formic acid unit and the nucleophilic character of the amine resulted in a C?N coupling reaction. Finally, two sequential silyl‐group and H^? transfer steps occurred to generate the final product. Upon comparing the reaction barrier and the hydrogenation of indole, our mechanism is more favorable than that proposed by the group of Yu and Fu.