HPLC/MS测定动物组织及尿样中的β-兴奋剂

采用微量化样品前处理技术，以固相萃取为净化方法．电喷雾正离子多反应监测方式建立了尿样及动物组织中β-兴奋剂残留量的液相色谱-串联质谱联用测定法。检测的定量限在0．15～0．6ng／g，线性范围均大于10^3，线性方程的相关系数大于0．999，组织样品和尿样的回收率大于70％．     

人尿液中麻黄碱和可待因的液-液-液微萃取/高效液相色谱法测定

建立了液-液-液微萃取与高效液相色谱联用技术快速分析尿样中麻黄碱和可待因的方法.优化得到的最佳萃取条件:萃取溶剂为80μL苯,接受相为1.0μL 0.2 mol·L-1的HCI,搅拌速率为80 r·min-1,萃取时间为40 min.在该条件下.获得了高的富集因子(大于117倍).方法的线性范围为麻黄碱0.05-10mg·L-1,可待因0.10-10 mg·L-1,相关系数(r)大于0.997,检出限分别为0.025 mg·L-1和0.05 mg·L-1,相对标准偏差小于9%.该方法能有效地去除尿样中的干扰物质,有机溶剂消耗少,萃取效率高,可同时测定尿样中麻黄碱和可待因.     

离心式微固相萃取与液相色谱-质谱联用测定生物样品中新型合成大麻素

建立了离心式微固相萃取与液相色谱-质谱(LC-MS)联用，同步测定尿样和血样中5种新型合成大麻素的分析方法。尿样和血样稀释后在离心条件下通过C18离心式固相萃取柱，甲醇洗脱后LC-MS检测。结果显示，尿液基质中，5种合成大麻素在0.1～10μg/L浓度范围内线性关系良好，相关系数(R²)大于0.994，检出限(LODs)为0.01～0.02μg/L，定量限(LOQs)为0.05～0.08μg/L。全血基质中，5种合成大麻素在0.5～10μg/L浓度范围内线性关系良好，R²大于0.992, LODs为0.05～0.15μg/L, LOQs为0.18～0.50μg/L。在尿样和全血中分别添加0.5, 2, 10μg/L 3个浓度水平的合成大麻素，回收率分别为81.9%～108.3%和75.0%～95.5%，相对标准偏差(RSDs)低于10%。该方法可以满足生物样品中新型合成大麻素的分析需求。     

人工尿样中芥子气-谷胱甘肽加合物的气相色谱-质谱法检测

该文以气相色谱-质谱法测定人工尿样中的芥子气-谷胱甘肽加合物的β-裂解产物1,1′-磺酰基二(2-甲巯基)乙烷(SBMTE)。采用固相萃取(SPE)及固相支持液-液萃取(SLE)两种方法对尿样中的SBMTE进行富集净化,并对两种方法的影响因素进行了优化。采用中等极性毛细管色谱柱(DB-17MS)分离,以电子轰击源(EI)质谱选择离子模式(SIM)检测,内标法定量。结果表明,以SPE/GC-MS方法检测,SBMTE在1~100μg/L范围内线性关系良好,相关系数r为0.998 4,检出限(LOD)为0.1μg/L,回收率大于90%;以SLE/GC-MS方法检测,SBMTE在2~150μg/L范围内线性关系良好,相关系数r为0.998 8,检出限为0.5μg/L,回收率大于90%。SPE方法适用于直接检测空白尿样中添加SBMTE或芥子气染毒真实尿样还原后样品的进一步净化处理,SLE方法可应用于芥子气染毒后真实尿样的确证检测和溯源性检测。     

固相萃取与超高效液相色谱-质谱联用测定生物样品中芬太尼类物质

建立了固相萃取与液相色谱-质谱(LC-MS)联用分析血清和尿液中10种芬太尼类物质的方法。样品经C18固相萃取(SPE)柱富集分离后,甲醇洗脱,洗脱液采用LC-MS测定。结果表明,尿样基质中,10种芬太尼物质质量浓度在1～100μg/L范围内线性关系良好,相关系数(R~2)大于0.99,检出限(LODs)和定量限(LOQs)范围分别为0.18～0.32μg/L和0.61～1.00μg/L。血清基质中,10种芬太尼含量在2～100μg/L范围内呈现良好的线性关系,其R~2大于0.99,LODs为0.15～0.33μg/L,LOQs为0.50～1.00μg/L。尿样中芬太尼类物质萃取回收率为84.2%～107.7%,血清中萃取回收率为84.7%～99.7%。该方法适用于生物流体中芬太尼类物质的同步测定。     

模板合成银纳米颗粒/DNA复合物：生物硫醇的高效荧光传感平台设计

金属纳米颗粒经常被用作纳米猝灭剂构建高效荧光传感平台.在本工作中,以FAM标记的DNA为模板,通过还原Ag＋制备得到银纳米颗粒（AgNPs）.由于AgNPs与DNA间稳固的结合,模板合成AgNPs呈现出很高的猝灭效率并可用作超猝灭剂以构建生物荧光传感平台.作为一种尝试,模板合成的DNA-AgNPs复合物被用作生物硫醇荧光检测.通过形成S-Ag键,硫醇与AgNPs发生作用并将FAM标记DNA从AgNPs表面取代下来,FAM荧光恢复.由于低的荧光背景信号,该传感器具有高信背比.此外,DNA-AgNPs复合物呈现出很好的稳定性,可应用于复杂的实际样品.为验证其在实际样品中检测生物硫醇的可行性,测定了人类尿样中的硫醇含量,其结果显示人类尿样中的硫醇总含量为229μM到302μM.为验证结果的可靠性,少量Cys被额外加入到尿样中,其回收率经测定为98%～103%.     

气相色谱法测定尿液中可卡因及其代谢物爱冈宁甲基酯

建立了尿样中可卡因（COC）及其代谢物爱冈宁甲基酯（EME）的气相色谱检测方法。 采用液液萃取法提取尿样中可卡因和爱冈宁甲基酯,考察了萃取剂种类和用量、试样pH值以及萃取时间等因素对提取效果的影响。 结果表明,尿样中COC和EME的最佳液液萃取条件是：以V(氯仿)∶V(异丙醇)=9∶1为提取溶剂,调节样品溶液pH=9.5,在40 ℃ 水浴振荡提取6 min。 COC和EME日内精密度分别为1.73%和1.44%,日间精密度分别为2.57%和2.89%,最低检出限（LOD）为0.040 mg/L。 此法无需衍生化、快速、准确、灵敏度高,可同时检测尿样中COC和EME的含量。     

苯酚、马尿酸和甲基马尿酸的反相高效液相色谱分析

本文提出了人体内苯、甲苯和二甲苯的代谢产物苯酚、马尿酸和甲基马尿酸的反相高效液相色谱分析法,讨论了其保留机制和样品预处理技术.以ODS为固定相,甲醇-水-醋酸为流动相时可实现良好分离.方法回收率为97.3%,相对标准偏差为1.02%.提出的方法可用于尿样分析,适用于临床与职业病防治的监测分析.     

示波极谱法同时测定尿中铅和镉

研究示波极谱法同时测定尿中铅和镉的方法.运用正交试验选择底液的组成为碘化钾-抗坏血酸-浓盐酸-磷酸.用硝酸、高氯酸、盐酸混合酸消化尿样,消化液在酸性介质中,置极谱仪的三电极系统,样品溶液在滴汞电极上产生还原电流,分别于-480 mV和-620 mV处测量铅和镉的峰电流,对尿样中铅和镉进行测定,铅、镉的质量浓度在100 μg·L-1以内与峰电流呈线性关系.铅、镉的相对标准偏差分别为6.91%,6.45%,检出限(3S/N)分别为2.0,1.0 μg·L-1,回收率分别为88.4%～101.4%,83.1%～103.5%.     

尿样中神经性毒剂代谢产物的HPLC/Q-TOFMS/MS检测方法研究

建立了尿样中甲基膦酸单乙酯(EMPA)、甲基膦酸单异丙酯(IMPA)、甲基膦酸频哪基酯(PMPA)3种神经性毒剂代谢产物的HPLC/Q-TOFMS/MS检测方法。以StrataSi-1型固相萃取小柱对尿样中的3种神经性毒剂代谢产物进行分离,HPLC/Q-TOFESIMS/MS进行测定,内标法定量。该方法对EMPA、IMPA、PMPA的线性范围均为5～320μg/L,相关系数均不低于0.9974;EMPA、IMPA、PMPA的加标回收率分别为57%、98%、81%;检出限(S/N≥3)均为0.1μg/L,定量下限(S/N≥10)均为1μg/L。并将该方法应用于禁化武组织(OPCW)首次生物医学样品分析演练未知尿样的检测,结果满意。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Microwave-assisted copper-catalyzed stereoselective ring expansion of three-membered heterocycles with α-diazo-β-dicarbonyl compounds

Microwave-assisted copper-catalyzed ring expansions of three-membered heterocycles with α-diazo-β-dicarbonyl compounds were investigated. Thiiranes generated 3-acyl-5,6-dihydro-1,4-oxathiines in the presence of copper sulfate and trans-3-acyl-5,6-dihydro-1,4-oxathiines as stereospecific products for 1,2-disubstituted cis-thiiranes through an intramolecular S_N2 process. Oxiranes gave rise to 2-acyl-5,6-dihydro-1,4-dioxines under the catalysis of copper hexafluoroacetylacetonate and cis-3-acyl-5,6-dihydro-1,4-dioxines as stereospecific products for 1,2-disubstituted cis-oxiranes via an intimate ion-pair mechanism. The current method provides a direct and simple strategy in efficient preparation of 3-acyl-5,6-dihydro-1,4-oxathiines and 2-acyl-5,6-dihydro-1,4-dioxines, important agents in medicinal and agricultural chemistry, from readily available thiiranes and oxiranes, respectively.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.