氨基酸在固体表面的吸附*

介绍了氨基酸在固体表面吸附的常见吸附模式和吸附等温线类型。在常见的等温式中Sips等温式能处理液相中吸附质浓度从低到高、吸附剂表面从均匀到不均匀等各种情形下的固/液吸附体系,得到的等温线一般归属4类：S型、L型、H型和C型;总结和讨论了各吸附参数对氨基酸吸附的影响,具体考察了氨基酸种类、固体表面的性质、溶剂种类、介质的pH、介质离子强度和温度等因素对氨基酸吸附的影响,指出通过优化各吸附参数,可以调整氨基酸和固体吸附剂之间的静电吸引力或疏水作用,达到最好的吸附效果;对氨基酸的固体吸附剂进行了分类阐述。     

Preparation and characterization of potassium copper nickel hexacyanoferrate(II) as an ion exchanger for cesium

Potassium copper nickel hexacyanoferrate(II) [KCNF] was prepared by treating potassium nickel hexacyanoferrate(II) with copper nitrate solution in 0.1M HNO₃. The resulting material was dried at various temperatures. Chemical analysis, i.r., thermal decomposition and surface property measurements were used to characterize the material. The adsorption of cesium from aqueous solutions on KCNF was investigated and optimized as a function of equilibration time and pH. The material dried at 110°C was found to be fairly stable in dilute acids, salt solutions, high doses of gamma-radiation and at high temperature. It also showed better surface properties and a high value of ion exchange capacity (2.25 mmol·g^–1) for cesium.     

Adsorption of La(III) onto GMZ bentonite: effect of contact time,bentonite content,pH value and ionic strength

Bentonite has been studied extensively because of its strong adsorption capacity. A local Na-bentonite named GMZ bentonite, collected from Gaomiaozi County (Inner Mongolia, China), was selected as the first choice of buffer/backfill material for the high-level radioactive waste repository in China. In this research, the adsorption of La (ΙΙΙ) onto GMZ bentonite was performed as a function of contact time, pH, solid content and metal ion concentrations by using the batch experiments. The results indicate that the adsorption of La (III) on GMZ bentonite achieves equilibration quickly and the kinetic adsorption follows the pseudo-second-order model; the adsorption of La (III) on the adsorbent is strongly dependent on pH and solid content, the adsorption process follows Langmuir isotherm. The equilibrium batch experiment data demonstrate that GMZ bentonite is effective adsorbent for the removal of La (III) from aqueous solution with the maximum adsorption capacity of 26.8 mg g⁻¹ under the given experimental conditions.     

竹炭对砷（Ⅲ）离子的吸附行为研究

研究了溶液的pH值与初始质量浓度、竹炭用量、吸附时间以及温度等因素对As（Ⅲ）离子吸附效果的影响。研究结果表明,在pH为3．00和12．50的情况下,竹炭对As（Ⅲ）离子有较好的吸附效果;同时吸附率随初始质量浓度的增加而降低,吸附能在180min内达到吸附平衡;等温吸附服从Freundlieh吸附等温方程式,酸性条件和碱性条件的最佳吸附温度分别为30℃和40℃。认为竹炭可作为理想的除砷吸附材料。     

氨基酸在固/液界面的吸附作用

本文介绍了氨基酸在固/液界面吸附等温线的特点,氨基酸液相吸附热力学和活性炭、硅胶、二氧化钛、氧化铝、蒙脱土等自水中吸附氨基酸的机制。     

微塑料富集金属铅元素的能力与特征分析

以微塑料为载体,考察了其对溶液中铅离子的富集能力。首先利用2%HNO_3为解吸溶液,并用超声波仪进行辅助解吸,然后用电感耦合等离子体质谱仪(ICP-MS)测定其吸附的铅含量,从而研究微塑料吸附铅离子的能力。对微塑料的材质、吸附时间、粒径、离子浓度、选择性以及共存离子等进行了考察,分析了微塑料吸附铅离子的特征。实验结果表明:不同材质的微塑料对铅离子的吸附能力不同,其中聚氯乙烯(PVC)、聚丙烯(PP)吸附量最高,分别达到1.32μg/g和0.63μg/g。微塑料粒径越大,其对铅离子的吸附量越低。随着吸附时间和铅离子浓度的增加,微塑料对铅离子的吸附效率出现先升后降的趋势。共存离子实验表明,当溶液中存在其他离子时,不同材质的微塑料对铅离子的吸附能力受到不同程度的影响,当铅离子和铜离子共存时,2种离子存在竞争性吸附现象。该文探索了微塑料对铅离子的吸附特性,可为深入研究海洋中微塑料富集重金属及其环境行为提供理论基础。     

Adsorption of Cu(II) ions from aqueous solution by hazelnut husk activated carbon prepared with potassium acetate

Hazelnut husk (HH), an agricultural waste, was converted to carbonaceous material by chemical activation using potassium acetate. The produced activated carbon (KAHHAC) was characterized by FTIR, SEM, N₂ adsorption–desorption experiments, CHN elemental analysis, and determination of moisture, ash, and point of zero charge. KAHHAC was used for the batch adsorption of Cu(II) ions from aqueous solutions. Optimum pH and contact time were found to be 5.0 and 240 minutes, respectively. The adsorption equilibrium data were described well by the Langmuir equation providing 105.3?mg?g^?1 Cu(II) adsorption capacity. The pseudo-second-order model successfully described the kinetic of Cu(II) adsorption by KAHHAC. The adsorbed Cu(II) onto KAHHAC was completely desorbed by 0.5?M nitric acid. In conclusion, HH activated carbon (AC) produced by the potassium acetate activation method is a very useful and efficient sorbent material for the removal of Cu(II) from aqueous solution.     

Protein films adsorbed on experimental dental materials: ToF-SIMS with multivariate data analysis

The proteins lysozyme, amylase, and bovine serum albumin (BSA) were adsorbed on two experimental dental materials, made of fluoroapatite particles embedded in polymer matrices, and on silicon wafers. The protein films were prepared as single-component layers, as binary mixtures, and as double layers. These systems were investigated by time-of-flight secondary ion mass spectrometry (ToF-SIMS) and the multivariate data analysis technique of discriminant principal-component analysis (DPCA). During adsorption of a single protein film on to the solid surfaces, the three proteins could be clearly distinguished by the scores of their mass spectra after selection of amino acid-related peaks and DPCA. Furthermore, very similar results were obtained on the two different fluoroapatite substrates. For samples coated with binary layers of two proteins adsorbed simultaneously, it was found for both substrate types that BSA shows the strongest ability to adsorb followed by lysozyme, while amylase has the smallest ability. By contrast, the consecutive adsorption of two protein layers showed a strong influence of substrate type on the adsorption ability of the proteins.     

Quantitative headspace analysis of solid samples; a classification of various sample types

Summary Volatile compounds in various solid samples have been analyzed quantitatively by equilibrium headspace gas chromatography with the technique of multiple headspace extraction (MHE). Solid samples can represent either a partition system, such as certain polymers, or an adsorption system, particularly when present as porous material. It has been found that the humidity of the sample has a strong influence on the equilibration in an adsorption system with a hydrophilic matrix and that the addition of water increases the volatility and speeds up the equilibration time. The influence of various important parameters, such as temperature, time, size and structure of the solid samples on the equilibration is demonstrated on the examples of the quantitative determination of vinyl chloride monomer in PVC, styrene in polystyrene, ethylene in polyethylene, ethylene oxide in a contact lens, halogenated hydrocarbons in coffee and residual solvents in drugs. Presented at the 15th International Symposium on Chromatography, Nürnberg, October 1984     

Removal of zinc metal ion (Zn) from its aqueous solution by kaolin clay mineral: A kinetic and equilibrium study

A laboratory batch study has been performed to study the effect of various physic-chemical factors such as initial metal ion concentration, solution pH, and amount of adsorbent, contact time and temperature on the adsorption characteristics of zinc (Zn²⁺) metal ions onto kaolin. It has been found that the amount of adsorption of zinc metal ion increases with initial metal ion concentration, contact time, solution pH but decreases with the amount of adsorbent and temperature of the system. Kinetic experiments clearly indicate that adsorption of zinc metal ion (Zn²⁺) on kaolin is a two steps process: a very rapid adsorption of zinc metal ion to the external surface is followed by possible slow decreasing intra-particle diffusion in the interior of the adsorbent which has also been confirmed by intra-particle diffusion model. The equilibrium time is found to be in the order of 60 min. Overall the kinetic studies showed that the zinc adsorption process followed pseudo-second-order kinetics among pseudo-first-order and intra-particle diffusion model. The different kinetic parameters including rate constant are determined at different initial metal ion concentration, solution pH, amount of adsorbent and temperature respectively. The equilibrium adsorption results are analyzed by both Langmuir and Freundlich models to determine the mechanistic parameters associated with the adsorption process. The value of separation factor, R_L from Langmuir equation also gives an indication of favorable adsorption. Finally thermodynamic parameters are determined at three different temperatures and it has been found that the adsorption process is exothermic due to negative ΔH° accompanied by decrease in entropy change and Gibbs free energy change (ΔG°).     

Advantages of Amperometric Readout Mode of Ion‐selective Electrodes under Potentiostatic Conditions

Amperometric responses of all‐solid‐state ion‐selective electrodes, recorded under potentiostatic conditions, were studied on example of potassium‐selective sensors with polypyrrole solid contact, at potential corresponding to reduction of the solid contact material and accompanying transfer of potassium ions across the membrane. Selective and stable in time linear dependences of current vs. logarithm of analyte concentration were recorded, resulting from high membrane resistance and changing membrane potential. The influence of experimental parameters as applied potential or thickness of the membrane was discussed. Advantages of the amperometric mode compared to potentiometric one relate to possibility of tailoring analytical parameters (sensitivity, magnitude of the signal) as well as over one order of magnitude decrease of the detection limit. The latter effect is achieved due to externally forced incorporation of potassium ions from the solution to the membrane, compensating their spontaneous release to the sample solution. A method of experimental setup simplification was proposed, with application of two‐electrode system, which can be used in the absence of external polarization source. The required driving force for the current flow was assured by spontaneous oxidation process occurring at the second electrode, coupled with reduction of the solid contact material of the ion‐selective electrode. In this case also stable in time calibration plots can be recorded.     

Zone formation in ion-pair RPLC I. Effects of adsorption of organic ions on established column equilibria

Summary Adsorption of organic ions to Bondapak Phenyl from a water-based mobile phase was studied by the breakthrough technique. The adsorption of decanesulfonate as sodium ion pair as well as of an organic cation, dimethylprotriptyline, as phosphate ion pair was best fitted to a two-site ion-pair adsorption model of the Langmuir type indicating a heterogenous solid phase surface. Introducing an organic ion into a column in equilibrium with an organic ion of opposite charge created negative zones due to increased adsorption of the second ion. The positions of the beginning and the end of the zone were dependent of the concentrations of the two organic ions in the system.     

固相萃取吸附材料在植物激素样品前处理中的应用新进展

植物激素在植物生长过程中具有重要作用,调节植物生长、发育及抗逆的各个过程。植物激素超微精准定量分析一直是植物生理学研究的瓶颈问题。植物激素的准确、高效检测目前大多是基于液相色谱-串联质谱联用技术。样品前处理是植物激素色谱-质谱分析中必不可少的一个步骤,直接影响后续检测方法的灵敏度和准确性。在植物激素各种前处理方法中,固相萃取(SPE)技术应用非常广泛。在萃取小柱基础上发展了多种新形式(分散固相萃取、磁性固相萃取、固相微萃取等,称之为SPE相关方法)。在上述SPE相关方法中,吸附材料的选择均是关键因素,决定了样品前处理过程的目标物提取、净化和富集效果。碳基材料(包括碳纳米管、石墨烯、碳氮化合物等)和有机骨架材料(包括金属有机骨架、共价有机材料)拥有结构可设计、比表面积大、稳定性良好等特性,非常适合作为吸附材料。分子印迹聚合物和超分子化合物依靠主-客体特异性分子识别作用,能显著提高样品前处理方法的选择性。本文重点针对植物激素样品前处理中的SPE技术,综述了近5年来上述几类功能化吸附材料的最新应用进展,并对其发展趋势进行展望。     

Influence of analysis conditions on low pressure adsorption measurements and its consequences in characterization of energetic and structural heterogeneity of microporous carbons

Nitrogen adsorption isotherms on nonporous and microporous carbons were thoroughly studied at low relative pressures. For nonporous carbons low pressure measurements seem to be unaffected by analysis conditions. However, these measurements on microporous solids may be affected by analysis conditions at relative pressures below 10^–4. It was shown that selection of proper equilibration time is crucial for correct measurements of equilibrium pressures during adsorption on microporous carbons. The isotherm shift induced by insufficient equilibration of the system may affect the surface heterogeneity and microporosity analysis. A comparison of the adsorption energy and pore volume distribution functions calculated from low pressure nitrogen adsorption isotherms measured at different equilibration times on a microporous carbon shows that this effect is smaller than it was expected.     

Adsorption of Cd(II) by Sol-Gel Silica Doped with N-(dipropylcarbamothioyl)thiophene-2-carboxamide

Sol-gel silica was doped with N,N-(dipropylcarbamothioyl) thiophene-2-carboxamide to investigate the sorption of cadmium (Cd) ions from aqueous media. In doped sol-gel silica, the large reagent molecules entrap into pores, whereas, small metal ions diffuse into pores where they make complex with doped reagent. This complexation can be accomplished by either ion exchange or chelation. Doped sol-gel sorbent was applied for removal of Cd(II) from aqueous solution in our study. Adsorption kinetics, adsorption isotherm, equilibration time, effect of initial concentration of adsorbate, and pH effect on the metal removal were studied to optimize the conditions. The prepared adsorbent shows rapid equilibrium and high stability toward high temperature and applied medium. In addition, desorption of metal ions was carried out by 1 M HCl and, thereafter, sol-gel silica adsorbent was regenerated and reused periodically.     

离子型共价有机框架材料的制备及对染料吸附性能的研究

茜素红(Alizarin Red,AR)作为蒽醌类染料中的重要组成,由于其具有优异的特性,在染料和酸碱指示剂等方面被广泛使用。但是AR具有毒性高、结构复杂以及化学需氧量(COD)值大等原因,使其成为了主要污染物之一,去除水体中的茜素红染料污染物已经成为了目前亟待解决的问题。共价有机框架材料作为一种新型的多孔有机材料,由于其具有比表面积大,孔径均一和可设计的独特优势,已经广泛应用吸附和分离等方面。因此,以三醛基间苯三酚和溴化乙锭为构筑单元,通过水热的方法合成一种二维离子型共价有机框架材料(TpEB-COF)。对制备的TpEB-COF进行相关表征,包括X射线衍射仪(XRD),扫描电镜(SEM)和能量色散谱仪(EDS)等。然后将制备的TpEB-COF作为固体吸附剂,将其应用对水中AR的吸附,研究了不同吸附时间和不同pH值对吸附过程的影响。实验结果证明制备的离子型共价有机框架材料具有良好的晶型结构。同时,对实验数据分析表明,离子型共价有机框架材料对于茜素红的吸附符合准二级动力学方程和Langmuir吸附模型,吸附效率为82.8%,最大吸附量为828 mg g-1。本研究不仅为共价有机框架材料的设计和合成奠定坚实的基础,而且拓展了离子型共价有机框架材料的应用范围,促进共价有机框架材料的发展。     

Molecular Imprints Frozen by Strong Intermolecular Interactions in Place of Cross-Linking

A new way to freeze molecular imprints in a polymer material is reported. So far, molecular imprinted polymers (MIP) involve copolymerization of a functional monomer and large amounts of cross-linking agent, which keeps the template shape memory in rigid molecular imprints. MIP materials are prepared herein without cross-linking agent. Stiff chains of polyaniline grafted on a solid support as a brush-like material achieve the necessary rigidity. Differential adsorption to imprinted and non-imprinted materials provides evidence of molecular imprints. A correct adsorption isotherm for mobile adsorbed layers (Volmer isotherm) is introduced instead of the popular but inadequate Langmuir isotherm. Non-selective adsorption is entropic, whereas adsorption to molecular imprints has an enthalpic contribution coming from specific interactions. Fast adsorption kinetics are a definite benefit with regards to applications such as chromatographic separations and chemical sensors.     

Enhanced swelling and adsorption properties of AAm‐AMPSNa/clay hydrogel nanocomposites for heavy metal ion removal

Novel type hydrogel‐clay nanocomposites based on the acrylamide (AAm)‐ 2‐acrylamido‐ 2‐methylpropane sulfonic acid (AMPS) sodium salt and clay were synthesized via in situ copolymerization in aqueous solution. Samples were characterized by determining total basic group (TGB) content and swelling degree, XRD analysis, and FTIR spectroscopy. Effects of monomer ratio and clay amount on the swelling properties of the samples were investigated. It was found that the hydrogel/clay nanocomposites exhibited improved swelling capacity compared with the hydrogels. Samples were used to remove heavy metal ions (Cu (II), Cd (II), and Pb (II)) from aqueous solution in competitive and non‐competitive conditions for the first time. The effects of time and pH of the initial metal ion solution on the adsorption capacity were investigated and selectivity properties of the samples were evaluated. It was found that incorporation of a low amount of clay (10% (wt)) into the polymer structure increased the heavy metal ion adsorption capacity of the sample. It was concluded that the AAm‐AMPS/clay nanocomposites could be used as novel type, fast‐responsive, and high capacity sorbent materials in heavy metal removing processes. Copyright © 2007 John Wiley & Sons, Ltd.     

Removal of Phenol by Using Montmorillonite,Clinoptilolite and Hydrotalcite

This work is to study the removal of phenol from aqueous solutions by adsorption using three different adsorbents, clinoptilolite, montmorillonite, and hydrotalcite (HT). Except for montmorillonite, the other adsorbents were treated. Clinoptilolite was modified using cetyltrimethylammonium bromide (CTAB) and hydrotalcite was calcined by heating to 550C. Adsorption isotherms of phenol on all of the mentioned adsorbents was determined by using the batch equilibration technique and indicated that, the adsorption behavior could be modelled by using the Modified Freundlich equation. The differences observed in the isotherms were explained by the variations in adsorbent-adsorbate interactions under the effects of the different surface structures of adsorbents and the pH dependent ionization behavior of phenol. Calcined hydrotalcite (HTC) was found to be the best among the studied adsorbents since it can adsorb 52% of phenol from a solution containing initially 1 g/L phenol for the 1/100 adsorbent solution ratio while the others can adsorb only 8% of phenol for the same concentration and adsorbent solution ratio.     

A review on experimental studies of surfactant adsorption at the hydrophilic solid-water interface

The progresses of understanding of the surfactant adsorption at the hydrophilic solid-liquid interface from extensive experimental studies are reviewed here. In this respect the kinetic and equilibrium studies involves anionic, cationic, non-ionic and mixed surfactants at the solid surface from the solution. Kinetics and equilibrium adsorption of surfactants at the solid-liquid interface depend on the nature of surfactants and the nature of the solid surface. Studies have been reported on adsorption kinetics at the solid-liquid interface primarily on the adsorption of non-ionic surfactant on silica and limited studies on cationic surfactant on silica and anionic surfactant on cotton and cellulose. The typical isotherm of surfactants in general, can be subdivided into four regions. Four-regime isotherm was mainly observed for adsorption of ionic surfactant on oppositely charged solid surface and adsorption of non-ionic surfactant on silica surface. Region IV of the adsorption isotherm is commonly a plateau region above the CMC, it may also show a maximum above the CMC. Isotherms of four different regions are discussed in detail. Influences of different parameters such as molecular structure, temperature, salt concentration that are very important in surfactant adsorption are reviewed here. Atomic force microscopy study of different surfactants show the self-assembly and mechanism of adsorption at the solid-liquid interface. Adsorption behaviour and mechanism of different mixed surfactant systems such as anionic-cationic, anionic-non-ionic and cationic-non-ionic are reviewed. Mixture of surface-active materials can show synergistic interactions, which can be manifested as enhanced surface activity, spreading, foaming, detergency and many other phenomena.