阴、阳离子表面活性剂混合体系在硅胶/水及硅胶/矿化水界面上的吸附

研究阴、阳离子表面活性剂混合体系(十二烷基氯代吡啶,辛基磺酸钠,辛基三乙基溴化铵/十二烷基苯磺酸钠)在硅胶,纯水和硅胶,矿化水界面上的吸附作用,探讨阴(阳)离子表面活性剂的存在对阳(阴)离子表面活性剂吸附作用的影响．结果表明,阴离子表面活性剂的存在基本不影响阳离子表面活性剂在带负电固体表面的吸附;而阳离子表面活性剂的存在却使本来吸附量就不大的阴离子表面活性剂在带负电的固体表面上不再吸附．在矿化水中阳离子表面活性剂的吸附量比在纯水中明显降低．从硅胶表面吸附机制解释了所得结果．     

Adsorption/aggregation of surfactants and their mixtures at solid-liquid interfaces

Adsorption of surfactants and polymers at solid-liquid interfaces is used widely to modify interfacial properties in a variety of industrial processes such as flotation, ceramic processing, flocculation/dispersion, personal care product formulation and enhanced oil recovery. The behavior of surfactants and polymers at interfaces is determined by a number of forces, including electrostatic attraction, covalent bonding, hydrogen bonding, hydrophobic bonding, and solvation and desolvation of various species. The extent and type of the forces involved varies depending on the adsorbate and the adsorbent, and also the composition and other characteristics of the solvent and dissolved components in it. The influence of such forces on the adsorption behavior is reviewed here from a thermodynamics point of view. The experimental results from microcalorimetric and spectroscopic studies of adsorbed layers of different surfactant and polymer systems at solid-liquid interfaces are also presented. Calorimetric data from the adsorption of an anionic surfactant, sodium octylbenzenesulfonate, and a non-ionic surfactant, dodecyloxyheptaethoxyethylalcohol, and their mixtures on alumina, yielded important thermodynamic information. It was found that the adsorption of anionic surfactants alone on alumina was initially highly exothermic due to the electrostatic interaction with the substrate. Further adsorption leading to a solloid (hemimicelle) formation is proposed to be mainly an entropy-driven process. The entropy effect was found to be more pronounced for the adsorption of anionic-non-ionic surfactant mixtures than for the anionic surfactant alone. Fluorescence studies using a pyrene probe on an adsorbed surfactant and polymer layers, along with electron spin resonance (ESR) spectroscopy, reveal the role of surface aggregation and the conformation of the adsorbed molecules in controlling the dispersion and wettability of the system.     

高分子表面活性剂在固/液界面上的吸附形态

采用紫外光谱、XPS研究了羧甲基纤维素型高分子表面活性剂在硅胶 /水界面上的吸附形态 ,结果表明随着高分子表面活性剂溶液浓度增大 ,分子在硅胶表面的吸附由单层逐渐变为多层 ,生成半胶束结构 .     

Synergism in the spreading of hydrocarbon-chain surfactants on polyethylene film-anionic and cationic mixtures by a two-step procedure

A study has been made of the adsorption, interaction, and spreading of mixtures of anionic and cationic surfactants at the aqueous solution/polyethylene (PE) interface. When a drop of an aqueous solution of an anionic or cationic hydrocarbon-chain surfactant is placed on a highly hydrophobic PE film (contact angle of water > 90 degrees ), it spreads to an area very little larger than that of a drop of water of the same volume. If the anionic and cationic hydrocarbon-chain surfactant solutions are mixed prior to being applied to PE film, synergism is small, if any, and the reproducibility of the experimental results is poor. However, when the cationic and anionic aqueous solutions are applied on the PE film in a sequential manner, a remarkable synergism in spreading is observed and the results are very reproducible. The area spread by an aqueous solution of the anionic-cationic mixture may be more than 400 times that of aqueous solutions of the same volume and surfactant concentration of the individual surfactant components. Previous work in this laboratory on surfactant systems showing synergism in spreading on PE film, but only weak interaction at the aqueous solution/air interface, showed that the synergy was due to changes at the aqueous solution/PE interface and not to the changes at the aqueous solution/air or PE/air interface. Investigation of the adsorption behavior at the aqueous solution/solid interface of two of the anionic-cationic mixtures studied here indicates the reason for differences in spreading behavior observed with different anionic-cationic mixtures. The more similar the adsorption tendencies at the solid/aqueous solution interface of the anionic and cationic surfactants, and the closer their adsorption to an equimolar monolayer there, the stronger their interaction there and the greater their enhancement of the spreading. A mechanism is proposed for the synergy in spreading observed, based upon the difference between the surface tension in the precursor film at the spreading interface and that at the top of the spreading drop.     

Manipulation of the adsorption of ionic surfactants onto hydrophilic silica using polyelectrolytes

This paper demonstrates the use of polyelectrolytes to modify and manipulate the adsorption of ionic surfactants onto the hydrophilic surface of silica. We have demonstrated that the cationic polyelectrolyte poly(dimethyl diallylammonium chloride), poly-dmdaac, modifies the adsorption of cationic and anionic surfactants to the hydrophilic surface of silica. A thin robust polymer layer is adsorbed from a dilute polymer/surfactant solution. The resulting surface layer is cationic and changes the relative affinity of the cationic surfactant hexadecyl trimethylammonium bromide, C16TAB, and the anionic surfactant sodium dodecyl sulfate, SDS, to adsorb. The adsorption of C16TAB is dramatically reduced. In contrast, strong adsorption of SDS was observed, in situations where SDS would normally have a low affinity for the surface of silica. We have further shown that subsequent adsorption of the anionic polyelectrolyte sodium poly(styrene sulfonate), Na-PSS, onto the poly-dmdaac coated surface results in a change back to an anionic surface and a further change in the relative affinities of the cationic and anionic surfactants for the surface. The relative amounts of C16TAB and SDS adsorption depend on the coverage of the polyelectrolyte, and these preliminary measurements show that this can be manipulated.     

Protein conformational transitions at the liquid–gas interface as studied by dilational surface rheology

Experimental results on the dynamic dilational surface elasticity of protein solutions are analyzed and compared. Short reviews of the protein behavior at the liquid–gas interface and the dilational surface rheology precede the main sections of this work. The kinetic dependencies of the surface elasticity differ strongly for the solutions of globular and non-globular proteins. In the latter case these dependencies are similar to those for solutions of non-ionic amphiphilic polymers and have local maxima corresponding to the formation of the distal region of the surface layer (type I). In the former case the dynamic surface elasticity is much higher (> 60 mN/m) and the kinetic dependencies are monotonical and similar to the data for aqueous dispersions of solid nanoparticles (type II). The addition of strong denaturants to solutions of bovine serum albumin and β-lactoglobulin results in an abrupt transition from the type II to type I dependencies if the denaturant concentration exceeds a certain critical value. These results give a strong argument in favor of the preservation of the protein globular structure in the course of adsorption without any denaturants. The addition of cationic surfactants also can lead to the non-monotonical kinetic dependencies of the dynamic surface elasticity indicating destruction of the protein tertiary and secondary structures. The addition of anionic surfactants gives similar results only for the protein solutions of high ionic strength. The influence of cationic surfactants on the local maxima of the kinetic dependencies of the dynamic surface elasticity for solutions of a non-globular protein (β-casein) differs from the influence of anionic surfactants due to the heterogeneity of the charge distribution along the protein chain. In this case one can use small admixtures of ionic surfactants as probes of the adsorption mechanism. The effect of polyelectrolytes on the kinetic dependencies of the dynamic surface elasticity of protein solutions is weaker than the effect of conventional surfactants but exceeds the error limits.     

Premicellar and micelle formation behavior of dye surfactant ion pairs in aqueous solutions: deprotonation of dye in ion pair micelles

The premicellar and micelle formation behavior of dye surfactant ion pairs in aqueous solutions monitored by surface tension and spectroscopic measurements has been described. The measurements have been made for three anionic sulfonephthalein dyes and cationic surfactants of different chain lengths, head groups, and counterions. The observations have been attributed to the formation of closely packed dye surfactant ion pairs which is similar to nonionic surfactants in very dilute concentrations of the surfactant. These ion pairs dominate in the monolayer at the air-water interface of the aqueous dye surfactant solutions below the CMC of the pure surfactant. It has been shown that the dye in the ion pair deprotonates on micelle formation by the ion pair surfactants at near CMC but submicellar surfactant concentrations. The results of an equilibrium study at varying pH agree with the model of deprotonated 1:1 dye-surfactant ion pair formation in the near CMC submicellar solutions. At concentrations above the CMC of the cationic surfactant the dye is solubilized in normal micelles and the monolayer at the air-water interface consists of the cationic surfactant alone even in the presence of the dyes.     

Effects of protonation on the thermodynamic properties of alkyl dimethylamine oxides

The effects of protonation on alkyldimethyl amine oxide micelles are reviewed, mainly with regard to dodecyl and tetradecyl homologs. The topics discussed are hydrogen ion titration properties, critical micelle concentration (CMC), area per surfactant and micelle aggregation number. A hydrogen bond hypothesis is proposed to interpret the several characteristic results associated with protonation: between two cationic species as well as between the non-ionic-cationic pair. The dipole-dipole interaction of the non-ionic micelle is discussed in relation to both: (a) the unusually high CMC values of the non-ionic micelles compared with other non-ionic surfactants with the same hydrocarbon chain; and (b) the reversal of the stability of the non-ionic and the cationic micelles at high ionic strengths. Two different approaches of the salting out effect on the ionic micelles are compared, the Chan-Mukerjee approach and ours, in relation to the non-linear Corrin-Harkins relation. The obtained salting out constants of the surfactants carrying a dodecyl chain decreased as the head group becomes more polar. Infrared and 13C-NMR spectra data are examined from the point of the specific interaction claimed by the hydrogen bond model. Mixed surfactant systems including amine oxides and the solid state phase behavior of amine oxides are both briefly reviewed.     

CMC型高分子表面活性剂在固/液界面上的吸附

在润湿、乳化、洗涤、分散等应用领域中,表面活性剂分子在界面上的吸附状态对性能有重要影响.另一方面,在化学驱油过程中,表面活性剂分子在氧化物矿物上的吸附是引起表面活性剂损失的主要原因,表面活性剂的损耗量大,将降低采收率及经济效益[1].高分子表面活性剂作为一种多功能的新型表面活性剂在许多领域有广阔的应用前景,但对其性能研究尚处于起步阶段,特别是结构复杂的高分子双亲性共聚物,在吸附、乳化等方面研究尚少报导.羧甲基纤维素系列高分子表面活性剂是采用独特的超声波辐照技术合成的嵌段型共聚物,具有优良的表/界面活性[2],可望用…     

Interactions in Calcium Oxalate Hydrate/Surfactant Systems

Phase transformation of calcium oxalate dihydrate (COD) into the thermodynamically stable monohydrate (COM) in anionic (sodium dodecyl sulfate (SDS)) and cationic (dodecylammonium chloride) surfactant solutions has been studied. Both surfactants inhibit, but do not stop transformation from COD to COM due to their preferential adsorption at different crystal faces. SDS acts as a stronger transformation inhibitor. The general shape of adsorption isotherms of both surfactants at the solid/liquid interface is of two-plateau-type, but differences in the adsorption behavior exist. They originate from different ionic and molecular structures of crystal surfaces and interactions between surfactant headgroups and solid surface. Copyright 1999 Academic Press.     

The effect of adsorbed carboxymethyl cellulose on the cotton fibre adsorption capacity for surfactant

The research reported in this paper demonstrates that the capacity of cotton fibres to adsorb cationic surfactants as well as the rate of the adsorption process can be increased by adsorbing carboxymethyl cellulose (CMC) onto the fibre surfaces; in addition, the adsorption can be restricted to the fibre surface. CMC was deposited by means of adsorption from an aqueous solution. The adsorption of N-cetylpyridinium chloride (CPC) from an aqueous solution onto the CMC-modified fibres was measured using UV-spectrometric determination of the surfactant concentration in the solution. Adsorption onto the cotton fibres was studied in a weakly basic environment (pH 8.5) where cotton fibres are negatively charged and the CPC ion is positively charged. Modification of the fibres by adsorption of CMC introduces new carboxyl groups onto the fibre surfaces, thereby increasing the adsorption capacity of the fibres for CPC. The initial rate of adsorption of CPC increased proportionally with the amount of charge; however, this rate slowed down at high degrees of coverage on fibres with a high charge. The adsorption of cationic surfactant to the anionic surface groups was stoichiometric, with no indication of multilayer or admicelle formation. It was evident that the acidic group content of the fibres was the primary factor determining cationic surfactant adsorption to these fibres.     

The effect of surfactants on adsorbed layers of a cationic polyelectrolyte

A comparative study of the influence of anionic (sodium dodecyl sulfate, SDS), cationic (tetradecyltrimethylammonium bromide, TTAB) and non-ionic (penta-ethyleneglycol mono n-dodecyl ether, C₁₂E₅) surfactants on the structure and composition of adsorbed layers of cationic hydrophobically modified hydroxyethylcellulose (Quatrisoft LM 200) on hydrophilic surfaces (mica and silica) was carried out using surface force apparatus andin situ null ellipsometry. It is shown that a complex interplay of electrostatic, hydrophobic, and steric effect govern polymer/surfactant/surface interactions and that the effect of surfactant addition strongly depends on its nature and concentration.Both anionic and non-ionic surfactants exhibit aggregation on the polymer hydrophobes. SDS has the most profound influence on Quatrisoft interfacial behavior due to the changes in electrostatics accompanying formation of the polymer/surfactant complex. In the case of C₁₂E₅, large surfactant clusters bound to the polymer affect the macromolecules' conformation in the adsorbed layer via steric effects. In contrast to SDS and C₁₂E₅, no evidence of interaction between the polycation and a like-charged surfactant, TTAB, was obtained. At the same time, TTAB adsorbs on the surface in competition with the polyelectrolyte. This results in partial displacement of the latter and its looser attachment to the surface.     

Understanding surfactant aided aqueous dispersion of multi-walled carbon nanotubes

Dispersions of multi-walled carbon nanotubes (MWNTs) assisted by surfactant adsorption were prepared for a number of ionic and non-ionic surfactants including sodium 4-dodecylbenzenesulfonate (NaDDBS), hexadecyl(trimethyl)azanium bromide (CTAB), sodium dodecane-1-sulfonate (SDS), Pluronic? F68, Pluronic? F127, and Triton? X-100 to examine the effects of nanotube diameter, surfactant concentration, and pH on nanotube dispersability. Nanotube diameter was found to be an important role in surfactant adsorption rendering single-walled carbon nanotube studies as unreliable in predicting MWNT dispersive behavior. Similar to other reports, increasing surfactant concentrations resulted in a solubility plateau. Quantification of nanotube solubility at these plateaus demonstrated that CTAB is the best surfactant for MWNTs at neutral pH conditions. Deviations from neutral pH demonstrated negligible influence on non-ionic surfactant adsorption. In contrast, both cationic and anionic surfactants were found to be poor dispersing aids for highly acidic solutions while, CTAB remained a good surfactant under strongly basic conditions. These pH dependent results were explained in the context of nanotube surface ionization and Debye length variation.     

The effect of surfactants on the pH transition interval of bromothymol blue immobilized on XAD 4

Cationic, anionic and non-ionic surfactants adsorb readily from aqueous solution on to Amberlite XAD 4. The ionic surfactants cause the pH of the solution in contact with the resin to differ from that in the bulk of solution, cationic surfactants increasing the interfacial pH and anionic surfactants decreasing it. This causes a shift in the pH transition interval of a co-adsorbed pH indicator when measured with respect to the bulk solution. The quantity of ionic surfactant adsorbed tends to a constant value (presumably monolayer coverage) with increasing solution concentration, this amount being a function of the individual surfactant, whereas non-ionic surfactants readily form multilayers. Significant adsorption occurs when the surfactant possesses at least 14 carbon atoms.     

Adsorption and Micellization in Solutions of Dodecylpyridinium Bromide–Nonionic Surfactant Mixtures

Dependences of the surface tension of aqueous solutions of cationic (dodecylpyridinium bromide) and nonionic (Tween 80, Triton X-100) surfactants and their mixtures on total surfactant concentration and solution composition were studied. The values of critical micellization concentration (CMC) and excess free energy of adsorption were determined from tensiometric measurements. Based on Rubingh–Rosen model (approximation of the theory of regular solutions), the compositions of micelles and adsorption layers at the solution–air interface as well as parameters of interaction between the molecules of cationic and nonionic surfactants were calculated for the systems indicated above. It was established that, in the case of surfactant mixtures with considerable difference in the CMCs, the micelles of individual surfactant with lower CMC value are formed. The effect of negative deviation from the ideality during the adsorption of surfactants from mixed solutions at the solution–air interface was disclosed. It was shown that the interaction energy depends significantly on the composition of mixed systems.     

Molecular dynamics simulations of surfactants at the silica-water interface: anionic vs nonionic headgroups

Understanding surfactant adsorption on surfaces at the molecular level will provide us with the ability to design specific surfactants for surface modification. We conducted molecular dynamics simulations for sodium dodecyl sulfate (SDS) and hexaethylene glycol monododecyl ether (C(12)E(6)) adsorbed on silica substrates with varying degree of hydroxylation. Our results shed light on the effects of hydroxylation on the surfactant aggregate morphology. The discrete charge distribution on the substrate surface appears to dictate both surfactant adsorption and aggregate morphology. The differences in aggregate morphology observed for anionic SDS and non-ionic C(12)E(6) on silica substrates are discussed quantitatively and compared to available experimental data.     

Counterion Nature and Alkylammonium Halide Adsorption Thermodynamics

Two surfactants were synthesized by reacting hydrogen halides (hydrogen chloride and hydrogen bromide) with 1-dodecylamine. The resultant cationic surfactants, 1-dodecylammonium chloride (DDAC) and 1-dodecylammonium bromide (DDAB), were characterized by NMR spectrometry and FTIR spectroscopy and data related to their adsorption at the fluid liquid/gas interface were obtained employing bubble surface tensiometry, in pure water and in HCl 0.1 M. Data did not fit well to Langmuir isotherm but Frumkin isotherm did adequately describe to process of adsorption. Adsorption isotherms, as well as data related to critical micelle concentration, CMC, indicated that in HCl 0.1 M, the presence of electrolytes and a common ion to DDAC decreased chloride solvation, changing surface packing and adsorption profile for this surfactant.     

The influence of mixed cationic–anionic surfactants on the three-phase contact parameters in silica–solution systems

The formation of thin wetting films on silica surface from aqueous solution of (a) tetradecyltrimetilammonium bromide (C₁₄TAB) and (b) surfactant mixture of the cationic C₁₄TAB with the anionic sodium alkyl- (straight chain C₁₂–, C₁₄– and C₁₆–) sulfonates, was studied using the microscopic thin wetting film method developed by Platikanov. Film lifetimes, three-phase contact (TPC) expansion rates, receding contact angles and surface tension were measured. It was found that the mixed surfactants caused lower contact angles, lower rates of the thin aqueous film rupture and longer film lifetimes, as compared to the pure C₁₄TAB. This behavior was explained by the strong initial adsorption of interfacial complexes from the mixed surfactant system at the air/solution interface, followed by adsorption at the silica interface. The formation of the interfacial complexes at the air/solution interface was proved by means of the surface tension data. It was also shown, that the chain length compatibility between the anionic and cationic surfactants controls the strength of the interfacial complex and causes synergistic lowering in the surface tension. The film rupture mechanism was explained by the heterocoagulation mechanism between the positively charged air/solution interface and the solution/silica interface, which remained negatively charged.     

Adsorption of organic molecules on silica surface

The adsorption behaviour of various organic adsorbates on silica surface is reviewed. Most of the structural information on silica is obtained from IR spectral data and from the characteristics of water present at the silica surface. Silica surface is generally embedded with hydroxy groups and ethereal linkages, and hence considered to have a negative charged surface prone to adsorption of electron deficient species. Adsorption isotherms of the adsorbates delineate the nature of binding of the adsorbate with silica. Aromatic compounds are found to involve the pi-cloud in hydrogen bonding with silanol OH group during adsorption. Cationic and nonionic surfactants adsorb on silica surface involving hydrogen bonding. Sometimes, a polar part of the surfactants also contributes to the adsorption process. Styryl pyridinium dyes are found to anchor on silica surface in flat-on position. On modification of the silica by treating with alkali, the adsorption behaviour of cationic surfactant or polyethylene glycol changes due to change in the characteristics of silica or modified silica surface. In case of PEG-modified silica, adsolubilization of the adsorbate is observed. By using a modified adsorption equation, hemimicellization is proposed for these dyes. Adsorptions of some natural macromolecules like proteins and nucleic acids are investigated to study the hydrophobic and hydrophilic binding sites of silica. Artificial macromolecules like synthetic polymers are found to be adsorbed on silica surface due to the interaction of the multifunctional groups of the polymers with silanols. Preferential adsorption of polar adsorbates is observed in case of adsorbate mixtures. When surfactant mixtures are considered to study competitive adsorption on silica surface, critical micelle concentration of individual surfactant also contributes to the adsorption isotherm. The structural study of adsorbed surface and the thermodynamics of adsorption are given some importance in this review.     

Adsorption of organic compounds onto polyelectrolyte immobilized-surfactant aggregates on cellulosic fibers

The adsorption of anionic surfactants with different hydrophobic chain lengths onto cellulose fibers pretreated with a cationic polyelectrolyte has been investigated. Five steps are involved in the adsorption process, which was ascribed to the formation of monolayer and bilayer surfactant aggregates. Electrostatic interaction between the residual surface charges followed by hydrophobic interaction among the alkyl chains are considered the main factors in the adsorption process. The adsorption of the anionic surfactant was found to greatly enhance the retention of organic compounds onto the polyelectrolyte-treated cellulose. The coadsorption phenomenon, which was dependent on the saturation level of the adsorbed surfactant, has been explained in terms of the accumulation of the organic solute on the hydrophobic core generated by the adsorbed layer.