NOx-Sorbing Metal Oxides, MnOx–CeO2. Oxidative NO Adsorption and NOx–H2 Reaction

(n)MnO_x–(1–n)CeO₂ binary oxides have been studied for the sorptive NO removal and subsequent reduction of NO_x sorbed to N₂ at low temperatures (150 °C). The solid solution with a fluorite-type structure was found to be effective for oxidative NO adsorption, which yielded nitrate (NO^– ₃) and/or nitrite (NO^– ₂) species on the surface depending on temperature, O₂ concentration in the gas feed, and composition of the binary oxide (n). A surface reaction model was derived on the basis of XPS, TPD, and DRIFTS analyses. Redox of Mn accompanied by simultaneous oxygen equilibration between the surface and the gas phase promoted the oxidative NO adsorption. The reactivity of the adsorbed NO_x toward H₂ was examined for MnO_x–CeO₂ impregnated with Pd, which is known as a nonselective catalyst toward NO–H₂ reaction in the presence of excess oxygen. The Pd/MnO_x–CeO₂ catalyst after saturated by the NO uptake could be regenerated by micropulse injections of H₂ at 150 °C. Evidence was presented to show that the role of Pd is to generate reactive hydrogen atoms, which spillover onto the MnO_x–CeO₂ surface and reduce nitrite/nitrate adsorbing thereon. Because of the lower reducibility of nitrate and the competitive H₂–O₂ combustion, H₂–NO reaction was suppressed to a certain extent in the presence of O₂. Nevertheless, Pd/MnO_x–CeO₂ attained 65% NO-conversion in a steady stream of 0.08% NO, 2% H₂, and 6% O₂ in He at as low as 150 °C, compared to ca. 30% conversion for Pd/–Al₂O₃ at the same temperature. The combination of NO_x-sorbing materials and H₂-activation catalysts is expected to pave the way to development of novel NO_x-sorbing catalysts for selective deNO_x at very low temperatures.     

Highly efficient photocatalytic NO removal and in situ DRIFTS investigation on SrSn（OH）6

A novel SrSn（OH）₆ photocatalyst with large plate and particle size were synthesized via a facile chemical precipitation method.The photocatalytic activity of the SrSn（OH）₆ was evaluated by the removal of NO at ppb level under UV light irradiation.Based on the ESR measurements,SrSn（OH）₆ photocatalyst was found to have the ability to generate the main active species of O₂^·-,^·OH and ¹ O₂ during the photocatalyti...     

Adsorption Behavior of Nitrogen Monoxide on KxGaxSn8−xO16 Hollandite

Fine powder of K _x Ga _x Sn_8–x O₁₆ hollandite was prepared by the sol-gel process using metal alkoxides, and the adsorption behavior of nitrogen monoxide (NO) on it was examined by temperature programmed desorption (TPD) method and in situ diffuse reflectance fourier transform infrared spectroscopy. Any species other than nitrogen monoxide were not detected in the TPD measurement, and the profile showed three stages between 420 and 880 K which were regarded as the desorption of chemically adsorbed NO _x species. This desorption behavior seems well consistent with the spectral changes in the FT-IR measurement. The absorption band at 1270 cm^–1 was decayed in the first stage from 420 to 640 K, and the bands at 1235 and 1570 cm^–1 in the second stage from 640 and 770 K. In the third stage above 770 K, the strong band at 1340 cm^–1 disappeared. These NO _x species on the hollandite were estimated to have a form of NO₃ ^– in the first and second stages and a form of NO₂ ^– in the third stage, considering the data on adsorption of nitrogen oxides on La₂O₃ and CaO.     

Preparation of Silicates Using HSi(OC2H5)3 and Their NO x -Adsorption Behavior

The preparation and NO-adsorption/desorption behavior of Li, Ca and Ba silicates were investigated aiming at the application to a NO_x-absorbent. Li silicate was prepared by reaction of HSi(OC₂H₅)₃ with aqueous lithium silicate solution (LSS). Ca and Ba silicates were prepared from gels obtained using CH₃Si(OC₂H₅)₃, Si(OC₂H₅)₄, HSi(OC₂H₅)₃ and alkaline-earth alkoxides. The surface of these silicates indicated the solid basicity of H₀ = 9 and adsorbed the acidic gas of NO. FT-IR spectra of the silicates adsorbing NO showed the absorption peaks in the range of 1300–1600 cm^{– 1} corresponding to ionic and covalent nitrate NO₃^–. The complete desorption of adsorbed NO species occurred above 500°C in the Li silicate, above 500°C in the Ca and Ba silicates prepared using CH₃Si(OC₂H₅)₃, and above 700°C in the Ba and Ca silicates prepared using Si(OC₂H₅)₄. Regarding the Ca and Ba silicates, the difference in siloxane structure is thought to cause the difference in adsorption state and desorption behavior of NO.     

氮掺杂TiO2光催化剂的制备及可见光催化性能研究

在溶胶-凝胶法基础之上,以尿素为氮源,通过较温和的反应条件来制备氮掺杂TiO₂光催化剂。以亚甲基蓝为模型化合物、日光色镝灯为光源,探索了其可见光光催化性能;并用XRD、低温氮气吸附-脱附技术、UV-Vis等表征了其结构特征;同时以对苯二甲酸为探针分子,结合化学荧光技术研究了光催化体系中·OH自由基的变化规律,进一步验证了其光催化活性规律。结果表明：氮掺杂能引起TiO₂光催化剂的激发吸收光谱明显红移并具较好的可见光响应性;在不同煅烧温度和尿素/钛酸丁酯物质的量的比     

Catalytically Promoted NOx Sorption by ZrO2-Based Oxides

Metal promoted zirconia-based oxide sorbents, such as Pt–ZrO₂/Al₂O₃ for NO _x have been investigated. To clarify the role of the catalyst component, sorption of NO and NO₂ was compared using the samples with and without Pt. The catalytic oxidation of NO to NO₂ and successively to nitrate ions is an important role for the Pt catalyst. The experimental results indicate that a high-temperature calcination is essential to remove residual Cl from Pt–ZrO₂–Al₂O₃ prepared from H₂PtCl₆ in order to provide more active NO _x sorption sites. Of M–ZrO₂–Al₂O₃ samples investigated, ruthenium as well as Pt demonstrated relatively good performance as a catalyst component in the sorbent. The FT-IR spectra after sorption of NO and NO₂ demonstrated a strong band attributed to stored nitrate ions. The Pt catalyst was more resistant to sulfur poisoning than a base metal catalyst. However, the NO _x sorptive capacities of the Pt–ZrO₂/Al₂O₃ sorbents were expected to be deteriorated in dilute SO₂ as far as observed from FT-IR spectra.     

A new ionic strength adjustor for nitrate analysis in waters,soils and plants using ion-selective electrode

A new ionic strength adjustor, ISA (ISA-Pb) composed of 0.02M Pb(CH₃COO)₂–0.01M PbO–0.02M CH₃COOK–0.01M NH₂SO₃H, was tested for the rapid nitrate analysis of waters, soil and plant extracts by means of ion-selective electrode (ISE). It was found that nitrate can be determined accurately and precisely within the concentration range of 5 × 10^–2 M to 2 × 10^–6 M. The proposed ISA-Pb, with a pH of 6.8, controlled the interferences of Cl^–, HCO ₃ ^– , NO ₂ ^– , and organic anions effectively, and gave results comparable to those obtained by the commonly used ISA with Ag₂SO₄ (ISA-Ag) and to well established chemical methods as well. ISA-Pb is much cheaper than ISA-Ag, and can therefore economically replace the latter when ISE is used for nitrate determination.Part of the senior author's doctorate thesis     

Dual-Plasmon Resonance Coupling Promoting Directional Photosynthesis of Nitrate from Air

Photocatalysis, particularly plasmon-mediated photocatalysis, offers a green and sustainable approach for direct nitrogen oxidation into nitrate under ambient conditions. However, the unsatisfactory photocatalytic efficiency caused by the limited localized electromagnetic field enhancement and short hot carrier lifetime of traditional plasmonic catalysts is a stumbling block to the large-scale application of plasmon photocatalytic technology. Herein, we design and demonstrate the dual-plasmonic heterojunction (Bi/Cs_xWO₃) achieves efficient and selective photocatalytic N₂ oxidation. The yield of NO₃⁻ over Bi/Cs_xWO₃ (694.32 μg g⁻¹ h⁻¹) are 2.4 times that over Cs_xWO₃ (292.12 μg g⁻¹ h⁻¹) under full-spectrum irradiation. The surface dual-plasmon resonance coupling effect generates a surge of localized electromagnetic field intensity to boost the formation efficiency and delay the self-thermalization of energetic hot carriers. Ultimately, electrons participate in the formation of ⋅O₂⁻, while holes involve in the generation of ⋅OH and the activation of N₂. The synergistic effect of multiple reactive oxygen species drives the direct photosynthesis of NO₃⁻, which achieves the overall-utilization of photoexcited electrons and holes in photocatalytic reaction. The concept that the dual-plasmon resonance coupling effect facilitates the directional overall-utilization of photoexcited carriers will pave a new way for the rational design of efficient photocatalytic systems.     

Viscosity of aqueous NH4Cl and tracer diffusion coefficients of ions,water and non-electrolytes in aqueous NH4Cl,KI, and MgCl2 at 25°C

Viscosities for aqueous NH₄Cl and tracer diffusion coefficients for²²Na⁺,³⁶Cl^–, HTO, and CH₃OH, acetone and dimethylformamide (all¹⁴C-labelled) in NH₄Cl supporting electrolyte are reported for 25°, together with tracer diffusion coefficients for²²Na⁺,³⁶Cl^–, and¹⁴CH₃OH in 1M KI, and for¹⁴CH₃OH in 1M MgCl₂. The diffusion coefficient of HTO in NH₄Cl solutions is slightly larger, for most of the concentration range investigated (0.05 to 4.5 M), than the value for pure water and is almost unaffected by the supporting electrolyte up to about 4M. Similar behavior is shown by CH₃OH, acetone and dimethylformamide in NH₄Cl solutions. Onsager limiting law behavior is approached by Cl^– at NH₄Cl concentrations in the 0.05–0.1M region but at much lower concentrations by Na⁺.     

The photocatalytic •OH production activity of g-C3N4 improved by the introduction of NO

The efficiency of photocatalytic pollutant removal largely depends on the ability of the photocatalytic system to produce hydroxyl radicals (^?OH). However, the capability of photocatalyst to produce ^?OH is not strong at present. Advancing the capacity of photocatalytic system to produce ^?OH has always been a tough problem and challenge in the field of environmental science. In this research, it was found that introducing nitric oxide (NO) into the graphitic carbon nitride (g-C₃N₄) photocatalytic system could memorably enhance the ability of producing ^?OH group. This study provides a new idea for improving the capacity of photocatalytic ^?OH production.     

A novel 18-metallacrown-6 complex: Synthesis, structural characterization and magnetic properties

The novel 18-metallacrown-6 complex, with the formula of [Mn₆(C₁₁H₁₁N₂O₃)₆(CH₃CH₂OH)₆]·3C₃H₇NO·2CH₃CH₂OH (1) (pmshz = N-propanoyl-3-methyl-salicylhydrazide), has been prepared and characterized. The self-assembled, manganese complex assumes a nearly planar cyclic structure with an [Mn–N–N]₆ backbone. Due to the coordination, the ligand enforces the stereochemistry of the Mn³⁺ ions as a propeller shape with alternating …ΔΛΔΛ… configurations. The magnetic properties of the metallacrown molecule are characterized by a weak antiferromagnetic exchange interaction between the Mn³⁺ ion spins with S = 2 in the cyclic system.     

硝酸活化三聚氰胺前驱体对g-C3N4结构和可见光催化性能的影响

为缩短e-和h+的迁移途径而改善g-C3N4易发生光生载流子复合的缺陷,采用不同物质的量浓度的HNO3活化三聚氰胺前驱体,通过形成质子化氨基基团,制备了一系列x-HNO3-g-C3N4(x=1,2,3,4,5 mol·L^-1)光催化剂。采用N2物理吸附-脱附、X射线粉末衍射(XRD)、扫描电镜(SEM)、透射电镜(TEM)、X射线光电子能谱(XPS)、荧光光谱(PL)、紫外-可见漫反射光谱(UV-Vis DRS)、瞬态光电流响应谱(TCS)和电化学阻抗图谱(EIS)等测试手段对上述光催化剂进行了表征分析,以考察催化剂的结构与其光催化性能之间的影响作用规律。以罗丹明B(RhB)为模拟染料污染物,分别以x-HNO3-g-C3N4和直接煅烧三聚氰胺得到的g-C3N4为光催化剂,进行了可见光催化降解活性差异性能测试研究。由实验结果可知:3 mol·L^-1-HNO3-g-C3N4的光催化活性最高,相较于直接煅烧三聚氰胺得到的g-C3N4,在60 min内,其可将RhB的降解率从38%提高到99%。将3 mol·L^-1-HNO3-g-C3N4催化剂循环使用4次后,催化效果仍为99%。这是因为三聚氰胺前驱体经HNO3活化后,可使经热聚合制备而成的g-C3N4产品具有较高的聚合度,从而得到具有大比表面积的多层g-C3N4;此外,PL结果证明其荧光强度明显降低,而使载流子寿命获得了显著提高;EIS结果表明其载流子传输能力有了明显的增强,从而提高了g-C3N4的光催化活性。     

Silylating Agents Grafted onto Silica Derived from Leached Chrysotile

Silica from leached chrysotile fibers (SILO) was silanized with trialkoxyaminosilanes to yield inorganic–organic hybrids designated SILx (x=1–3). The greatest amounts of the immobilized agents were quantified as 2.14, 1.90, and 2.18 mmol g⁻¹ on SIL1, SIL2, and SIL3 for –(CH₂)₃NH₂,–(CH₂)₃NH(CH₂)₂NH₂, and –(CH₂)₃NH(CH₂)₂NH(CH₂)₂NH₂ groups attached to the inorganic support. The infrared spectra for all modified silicas showed the absence of the Si–OH deformation mode, originally found at 950 cm⁻¹, and the appearance of asymmetric and symmetric C–H stretching bands at 2950 and 2840 cm⁻¹. Other important bands associated with the organic moieties were assigned to ν_as(NH) at 3478 and ν_sym(NH) at 3418 cm⁻¹. The NMR spectrum of the solid precursor material suggested two different kinds of silicon atoms: silanol and siloxane groups, between −90 and 110 ppm; however, additional species of silicon that contain the organic moieties bonded to silicon at −58 and −66 ppm appeared after chemical modification. These modified silicas showed a high adsorption capacity for cobalt and copper cations in aqueous solution, in contrast to the original SILO matrix, confirming the unequivocal anchoring of silylating agents on the silica surface.     

Cationic and Anionic Effects on the Glass Transition Temperature for Aqueous Electrolyte Solutions

Glass-forming composition regions of aqueous CH₃COOM (M = Li, Na, K, Rb, Cs, and Tl), CF₃COOM (M = Li, Na, K, Rb, and Cs), and Et₄NX (Et₄ = C₂H₅, X = OH, CH₃COO, Cl, Br, NO₃, and SCN) solutions are reported as a function of water concentration R (R = moles of water per moles of salt). Glass transition temperatures (T _g) were measured by a simple differential thermal analysis (DTA) method with a cooling rate of about 600 K-min^–1. The T _g of all solutions decrease with increasing R (decreasing salt concentration). It is found that T _g at the same R value decrease in the order Na⁺ > Li⁺ > K⁺ > Rb⁺ > Cs⁺ in all glass-forming composition regions of the alkali acetate salt and alkali trifluoroacetate salt solutions. T _g for Et₄NX solutions decrease in the order CH₃COO^– ~OH^– > Cl^– > Br^– > NO ₃ ^– > SCN^–. The effects of the cation and anion on the glass-forming behavior in these aqueous solutions are discussed.     

Highly photocatalytic activity of metallic hydroxide/titanium dioxide nanoparticles prepared via a modified wet precipitation process

Surface modification is one important approach to increase the photocatalytic activity of TiO₂. By using a modified wet precipitation process, novel M(OH)_x/TiO₂ nanoparticles were synthesized, where M(OH)_x represents ferric or cupric hydroxide. The prepared M(OH)_x/TiO₂ powders were characterized with XRD, FT-IR, BET, UV–vis DRS, and TGA, and were observed to yield high photocatalytic ability by using methyl orange (MO) as a model compound of organic pollutants to be degraded. Due to the accelerating effects of the new photocatalyst, the half-time of MO during its photocatalytic degradation at pH 6.0 over M(OH)_x/TiO₂ was decreased from 332 min for unmodified neat TiO₂ to 63 min for Fe(OH)₃/TiO₂ and 65 min for Cu(OH)₂/TiO₂, respectively. The enhancing effects of M(OH)_x/TiO₂ was further observed in a wide composition range with various M/Ti atomic ratios in the photocatalysts and in a wide pH range of the MO solution from 3 to 7. This enhancing effect is mainly attributed to the increased trapping of the photogenerated electron by the higher valence sites (Fe(III) or Cu(II)) in the hydroxide layer near the M(OH)_x/TiO₂ interface and the enriched surface hydroxyl groups which accept photogenerated holes to yield more hydroxyl radicals.     

活性氧自由基生成及传输对g-C_3N_4上NO光催化去除的影响:原位红外光谱与计算模拟结合法（英文）

石墨相氮化碳(g-C_3N_4)具有独特的二维层状结构和合适的能带结构,因而在可见光催化领域广受关注.尤其是在可见光去除环境污染物领域,得到了较为充分的研究与应用.然而g-C_3N_4去除环境污机理的反应机理尚不明确.因此,本文采用理论计算与实验高度结合的研究方法,以光催化NO去除为例,深入阐述了光照下g-C_3N_4表面活性氧物种(ROS)的生成及转化过程,及其介导下的NO光催化氧化机理.X射线衍射结果表明,g-C_3N_4是三嗪环层内聚合后层层堆叠而成,并由红外光谱确定了其表面的官能团类型.该结构经扫描电镜和透射电镜得到了进一步的验证.采用光致激发谱和紫外可见漫反射光谱等实验表征与密度泛函理论计算结合的光电性质分析,我们发现,g-C_3N_4在可见光下具有一定的响应,这为其在光催化去除NO中奠定了基础.同时,其价带位置过高,无法自行产生氧化性较强的羟基自由基(.OH).电子自旋共振技术结果表明g-C_3N_4在光照下能捕获到·O_2~-和·OH两种活性自由基.采用反应路径计算发现,·OH是由·O_2~-在导带上逐步得到电子被还原而生成,其中的速率控制步骤是H_2O_2的解离.因此,促进O_2分子的吸附和活化和克服H_2O_2解离的反应活化能是产生·OH和提升g-C_3N_4光催化氧化活性的关键.采用原位红外光谱技术对g-C_3N_4上NO的氧化去除过程进行了表征,发现其主要中间产物为NO_2,主要终产物为NO_2~-和NO_3~-,采用反应路径计算对该反应过程进行了理论模拟,发现在·O_2~-介导下,最高反应活化能为0.66 eV,而在·OH介导下,该活化能降低至0.46 eV,表明·OH的氧化性要明显强于·O_2~-.总之,本文采用一种可行的、高度结合的实验与计算手段研究了g-C_3N_4上ROS的生成及转化过程及其对NO去除的反应历程,在原子尺度揭示了该反应的机理,加深了对ROS在光催化环境污染物降解过程中作用的理解.     

Overall Water Splitting on the Transition‐Metal Oxynitride Photocatalyst LaMg1/3Ta2/3O2N over a Large Portion of the Visible‐Light Spectrum

One of the main targets of studies on water splitting photocatalysts is to develop semiconductor materials with narrower bandgaps capable of overall water splitting for efficient harvesting of solar energy. A series of transition‐metal oxynitrides, LaMg_xTa_1?xO_1+3xN_2?3x (x≥1/3), with a complex perovskite structure was reported as the first example of overall water splitting operable at up to 600 nm. The photocatalytic behavior of LaMg_1/3Ta_2/3O₂N was investigated in detail in order to optimize photocatalyst preparation and water‐splitting activity. Various attempts exploring photocatalyst preparation steps, that is, cocatalyst selection, coating material and method, and synthesis method for the oxide precursor, revealed photocatalyst structures necessary for achieving overall water splitting. Careful examination of photocatalyst preparation procedures likely enhanced the quality of the produced photocatalyst, leading to a more homogeneous coating quality and semiconductor particles with fewer defects. Thus, the photocatalytic activity for water splitting on LaMg_1/3Ta_2/3O₂N was largely enhanced.     

IR-Spectroscopic Study of Complex Formation of Nitrogen Oxides (NO,N2O) with Cationic Forms of Zeolites and the Reactivity of Adsorbed Species in CO and CH4 Oxidation

The formation of complexes and disproportionation of nitrogen oxides (NO, N₂O) on cationic forms of LTA, FAU, and MOR zeolites was investigated by diffuse-reflectance IR spectroscopy. N₂O is adsorbed on the samples under study in the molecular form and the frequencies of the first overtone of the stretching vibrations ν¹_0–2 and the combination bands of the stretching vibrations with other vibrational modes for N₂O complexes with cationic sites in zeolites (ν³_0–1 + ν¹_0–1, ν¹_0–1 + δ_0–2) are more significantly influenced by the nature of the zeolite. The presence of several IR bands in the region of 2400–2600 cm⁻¹ (the ν¹_0–1 + δ_0–2 transitions) for different zeolite types was explained by the availability of different localization sites for cations in these zeolites. The frequencies in this region also depend on the nature of the cation (its charge and radius). The data can be explained by the specific geometry of the N₂O complex formed, presumably two-point adsorption of N₂O on a cation and a neighboring oxygen atom of the framework. Adsorption of CO or CH₄ on the samples with preliminarily adsorbed N₂O at 20–180 °C does not result in any oxidation of these molecules. NO⁺ and N₂O₃ species formed by disproportionation of NO are capable of oxidizing CO and CH₄ molecules to CO₂, whereas NO_x is reduced simultaneously to N₂ or N₂O. The peculiarities in the behavior of cationic forms of different zeolites with respect to adsorbed nitrogen oxides determined by different density and localization of cations have been established.     

Rate Constant for the Reaction of the OH-Radical with CH2F2

The rate constant value of k ₁ = (6.05 ± 0.20)×10⁹ cm³ mol^–1 s^–1 (with ± 1 error) has been determined for the reaction OH + CH₂F₂ (1) by applying the discharge-flow/resonance-fluorescence method at 298 K.     

Structural studies on 3-acetyl-1,5-diaryl and 3-cyano-1,5-diaryl formazan chelates with cerium(III), thorium(IV) and uranium(VI)

Summary Solid complexes of 3-acetyl-1,5-diaryl and 3-cyano-1,5-diaryl formazans were prepared and characterized by elemental analysis, IR, NMR, TGA and DTA analyses. Based on these studies, the suggested general formula for the complexes is [M(HL) _m (OH^–) _n or (NO ₃ ^– or Cl^–) _x ·(H₂O) _y or (C₂H₅OH orDMSO) _z , where HL=formazanM=Ce³⁺, Th⁴⁺, and UO ₂ ²⁺ ,m=1–2,n=0–3,x=0–3,y=0–4 andz=0–3. The metal ions are expected to have coordination numbers 6–8.

---

Strukturuntersuchungen an 3-Acetyl-1,5-diaryl- und 3-Cyan-1,5-diaryl-formazan-Chelaten mit Cer(III), Thorium(IV) und Uran(VI)

Zusammenfassung Die hergestellten Chelate wurden mittels Elementaranalyse, IR, NMR, TGA und DTA charakterisiert. Darauf basierend wird die generelle Formel [M(HL) _m (OH^–) _n bzw. (NO ₃ ^– oder Cl^–) _x ·(H₂O) _y oder (C₂H₅OH bzw.DMSO) _z ] vorgeschlagen, wobei HL=Formazan,M=Ce³⁺, Th⁴⁺ oder UO ₂ ²⁺ ,m=1–2,n=0–3,x=0–3,y=0–4 undz=0–3. Die Metallionen haben Koordinationszahlen von 6–8.