Palladium-catalyzed tandem reaction of yne-propargylic carbonates with boronic acids: a simple method for the synthesis of fused aromatic rings through allene-mediated electrocyclization

The palladium-catalyzed tandem reactions of yne-propargylic carbonates with aryl boronic acids, 2-furyl boronic acid, and 2-thiopheneboronic acid, followed by 6pi-electrocyclization to give fused ring aromatic products such as naphthalene, benzofuran, and benzothiophene derivatives are realized. Screening of the reaction conditions revealed that the combination of [Pd(PPh3)4] in THF gave the best results in terms of reactivity and product yields in the reaction of yne-propargylic carbonates with phenylboronic acid. The reaction is sensitive toward steric hindrance when substituted phenylboronic acids are employed. However, when we take 2-furyl boronic acid as the organometallic reagent, most substrates perform very well to give benzofuran derivatives. In addition, 2-thiopheneboronic acid is also a very effective coupling reagent to give bezothiophenes in high yields. A mechanism is proposed that involves the formation of an allenylpalladium complex from Pd0 and propargylic carbonate, followed by insertion of an intramolecular triple bond and the Suzuki coupling reaction, and then electrocyclization.     

Real-time monitoring of microwave-promoted Suzuki coupling reactions using in situ Raman spectroscopy

The progress of microwave-promoted Suzuki reactions has been monitored using an in situ Raman spectroscopy apparatus assembled from commercially available components. It was possible to see if any reaction occurred and, if so, when it reached completion. In addition, the monitoring technique has given us an insight into the reaction, confirming that, when run in aqueous media, the coupling is in competition with the rapid deboronation of the boronic acid.     

Water as the reaction medium for multicomponent reactions based on boronic acids

Water is a suitable medium for the Petasis-borono-Mannich multicomponent reaction. Salicylaldehyde, glyoxalic acid, glycoaldehyde and glyoxal were reacted with several boronic acids and different amines affording alkylaminophenols, 2H-chromenes, α-amino acids, α-amino alcohols and 2-hydroxylmorpholines in good to high yields. An efficient new one-pot method for the assembly of boron-heterocycles based on amino-acids, boronic acids and salicylaldehyde using water as the reaction media is presented. The mechanisms of these reactions were studied by means of DFT calculations, and the effect of solvent on the calculated energy barriers was addressed, for different aldehydes.     

Which is reactive in alkaline solution, boronate ion or boronic acid? Kinetic evidence for reactive trigonal boronic acid in an alkaline solution

That boronic acid is a reactive species toward a diol moiety even in an alkaline solution and that the boronate ion is not very reactive were demonstrated by the estimated upper limit of the rate constants for the reactions of some boronic acids with 2,2'-biphenol and 2,3-dihydroxynaphthalene in a neutral-alkaline solution, which will correct a common misunderstanding in boron chemistry and would renew the idea of effective boronic acid sensor design for carbohydrates.     

Organocatalytic enantioselective transformations involving quinone derivatives as reaction partners

This digest summarizes the recent progress made in the organocatalytic asymmetric reactions involving 1,4-quinone derivatives. The roles of quinones as Michael donors, Michael acceptors, dienophiles, 1,3-dipolarophiles and cascade reaction partners have been extensively investigated to access complex structural frameworks in the presence of chiral amine catalysts, phosphoric acid catalysts, bifunctional catalysts (Cinchona alkaloids- and thiourea-based), carboxylic acid catalysts, boronic acid catalysts and cationic oxazaborolidinium ions.     

Real‐time reaction monitoring by probe electrospray ionization mass spectrometry

Probe electrospray ionization (PESI) is a modified version of the electrospray ionization (ESI), where the capillary for sampling and spraying is replaced by a solid needle. High tolerance to salts and direct ambient sampling are major advantages of PESI compared with conventional ESI. In this study, PESI‐MS was used to monitor some biological and chemical reactions in real‐time, such as acid‐induced protein denaturation, hydrogen/deuterium exchange (HDX) of peptides, and Schiff base formation. By using PESI‐MS, time‐resolved mass spectra and ion chromatograms can be obtained reproducibly. Real‐time PESI‐MS monitoring can give direct and detailed information on each chemical species taking part in reactions, and this is valuable for a better understanding of the whole reaction process and for the optimization of reaction parameters. PESI‐MS can be considered as a potential tool for real‐time reaction monitoring due to its simplicity in instrumental setup, direct sampling with minimum sample preparation and low sample consumption. Copyright © 2010 John Wiley & Sons, Ltd.     

A blue fluorescent antibody-cofactor sensor for mercury

[reaction: see text] A chemically programmed antibody sensor, consisting of a stilbenyl boronic acid cofactor and monoclonal antibody EP2-19G2, provides a new method of mercury detection. The fluorescent antibody sensor generates an intense powder blue fluorescence when bound to the stilbenyl boronic acid cofactor; however, it is quenched in the presence of Hg(2+) ions. The EP2-19G2-cofactor biosensor provides micromolar sensitivity and selectivity toward Hg(2+) ions over a wide range of metal ions in aqueous solution.     

迭代Suzuki偶联反应合成全氟环丁基芳基醚齐聚物的研究

对迭代Suzuki偶联反应合成全氟环丁基芳基醚齐聚物的方法进行了研究, 并合成了全氟环丁基芳基醚齐聚物. 首先从对溴苯酚出发, 合成了含有一个全氟环丁基芳基醚结构单元的中间体3. 芳基硼酸与中间体3进行Suzuki偶联反应, 得到了含有一个全氟环丁基芳基醚结构单元的硼酸. 重复与中间体3进行Suzuki偶联反应, 从而合成了全氟环丁基芳基醚二聚体和三聚体. 最后通过热环化二聚反应合成了全氟环丁基芳基醚三聚体、五聚体和七聚体.     

Disposable Sandwich‐type Electrochemical Sensor for Selective Detection of Glucose Based on Boronate Affinity

A disposable sandwich‐type electrochemical sensor for selective detection of glucose was established. The primary receptor, 3‐aminophenylboronic acid was grafted covalently onto the surface of screen‐printed carbon electrodes through an in situ‐generated diazo‐reaction. Glucose was first captured by boronic acid group on the electrode, followed by captureing an electroactive ferroceneboronic acid (FcBA) as the secondary receptor to form bidentate glucose‐boronic complex. Electrochemical impedance spectroscopy was applied to characterize the construction of sandwich‐type disposable sensor. In the sandwich assay, current response of captured FcBA on the electrode was dependent on the concentration of glucose. The sandwich assay showed higher selectivity for glucose than that for fructose, mannose, galactose and other electroactive interferences including uric acid, ascorbic acid and dopamine, and exhibited a dynamic concentration range of glucose from 0.5 to 20.0 mmol L⁻¹. The disposable sensor demonstrated a good reproducibility with 2.2 % relative standard deviation (RSD). In addition, the disposable glucose sensor was used in detection of the trace glucose in the clinical urine samples.     

Enantioselective recognition of mandelic acid by a 3,6-dithiophen-2-yl-9H-carbazole-based chiral fluorescent bisboronic acid sensor

We have prepared chiral fluorescent bisboronic acid sensors with 3,6-dithiophen-2-yl-9H-carbazole as the fluorophore. The thiophene moiety was used to extend the π-conjugation framework of the fluorophore in order to red-shift the fluorescence emission and, at the same time, to enhance the novel process where the fluorophore serves as the electron donor of the photoinduced electron transfer process (d-PET) of the boronic acid sensors; i.e., the background fluorescence of the sensor 1 at acidic pH is weaker compared to that at neutral or basic pH, in stark contrast to the typical a-PET boronic acid sensors (where the fluorophore serves as the electron acceptor of the photoinduced electron transfer process). The benefit of the d-PET boronic acid sensors is that the recognition of the hydroxylic acids can be achieved at acidic pH. We found that the thiophene moiety is an efficient π-conjugation linker and electron donor; as a result, the d-PET contrast ratio of the sensors upon variation of the pH is improved 10-fold when compared to the previously reported d-PET sensors without the thiophene moiety. Enantioselective recognition of tartaric acid was achieved at acid pH, and the enantioselectivity (total response K(D)I(F)(D)/K(L)I(F)(L)) is 3.3. The fluorescence enhancement (I(F)(Sample)/I(F)(Blank)) of sensor 1 upon binding with tartaric acid is 3.5-fold at pH 3.0. With the fluorescent bisboronic acid sensor 1, enantioselective recognition of mandelic acid was achieved for the first time. To the best of our knowledge, this is the first time that the mandelic acid has been enantioselectively recognized using a chiral fluorescent boronic acid sensor. Chiral monoboronic acid sensor 2 and bisboronic acid sensor 3 without the thiophene moiety failed to enantioselectively recognize mandelic acid. Our findings with the thiophene-incorporated boronic acid sensors will be important for the design of d-PET fluorescent sensors for the enantioselective recognition of α-hydroxylic acids such as mandelic acid, given that it is currently a challenge to recognize these analytes with boronic acid fluorescent molecular sensors.     

Potentiometric saccharide detection based on the pK(a) changes of poly(aniline boronic acid)

A novel approach for the potentiometric detection of saccharides using poly(aniline boronic acid) is presented. A model is described in which the electrochemical potential is sensitive to the change in the pK(a) of the conducting polymer as a result of boronic acid-diol complexation. In this system, boronic acid complexation is the mode of transduction and it is manifested as changes in the electrochemical potential of the polymer with remarkable selectivity. Characteristics of both transient and steady-state response associated with the complexation are discussed. The presence of Nafion and fluoride during the electrochemical polymerization of 3-aminophenylboronic acid are shown to impact the sensitivity and the stability of the electrode response. The sensor sensitivity is improved significantly by increasing the concentration of sodium fluoride during the polymerization. Finally, the nature of the selectivity of the boronic acid-diol reaction under these conditions is explored by using molecular orbital calculations.     

One-pot two-step microwave-assisted reaction in constructing 4,5-disubstituted pyrazolopyrimidines

[reaction: see text] A microwave-assisted reaction was developed to facilitate the construction of 4,5-disubstituted pyrazolopyrimidines. This one-pot two-step process involves a sequential S(N)Ar displacement of the C4 chloro substituent with various anilines and amines, followed by a Suzuki coupling reaction with different boronic acids. Using microwave irradiation leads to high product conversion, low side product formation, and shorter reactions.     

Polymer-assisted solution-phase (PASP) Suzuki couplings employing an anthracene-tagged palladium catalyst

A general method for polymer-assisted solution-phase (PASP) Suzuki reactions employing a combination of anthracene-tagged palladium catalyst and anthracene-tagged boronic acid with a polymer-supported carbonate base is reported. The anthracene-tagged catalyst allows for the easy removal of the Pd catalyst along with the dissociated phosphine ligand and phosphine oxide byproducts by sequestration through a chemoselective Diels-Alder reaction with a maleimide resin. The polymer-supported carbonate base facilitates the removal of excess boronic acid and the borane-containing byproducts present at the end of the coupling reaction. The Suzuki coupling reaction can be efficiently conducted by using combinations of the anthracene-tagged Pd catalyst, polymer-supported carbonate base, and anthracene-tagged boronic acid to yield the desired product in high purity and yield without the use of chromatography.     

Diastereoselective Petasis Mannich reactions accelerated by hexafluoroisopropanol: a pyrrolidine-derived arylglycine synthesis

A diastereoselective synthesis of pyrrolidine-derived arylglycines has been developed using the Petasis boronic acid Mannich reaction. High diastereoselectivities in the reactions of chiral amines, aryl boronic acids, and glyoxylic acid monohydrate have been demonstrated for the first time. Key to the implementation of this method is the discovery that hexafluoroisopropanol accelerates the Petasis process, reducing reaction times from multiple days to less than 24 h.     

Comparison of monomode and multimode microwave equipment in Suzuki-Miyaura reactions—en route to high throughput parallel synthesis under microwave conditions

The microwave heated Suzuki-Miyaura cross-coupling reaction of boronic acids, boronic esters and organotrifluoroborates served as a model reaction in a singlemode equipment. The reaction conditions were optimized with respect to temperature and reaction time and were transferred to multimode equipment which is well suited for multiparallel synthesis in a larger scale. The source of the Pd species chosen included immobilized Pd complexes and Pd particles. In fact the increased time to reach the required reaction time in multimode chambers suitable for 48 parallel reactions has to be taken into account. The nature of the boronic acid has no impact on the efficiency of the catalytic process. However, heterogenized Pd species perform less well in multimode chambers with larger vial volumes, which we ascribe to diffusion phenomena.     

Direct synthesis of the arylboronic acid analogues of phenylglycine via microwave-assisted four-component Ugi reaction

A four-component Ugi reaction (Ugi-4CR) utilizing formylphenyl boronic acids under mild condition was developed for the synthesis of arylboronic acid analogs. The reactions were performed in methanol and accelerated by microwave irradiation, which makes this strategy suitable for constructing boronic-containing chemical libraries. Two of the synthesized analogs were found to have cytotoxic activity against HepG2, MDA-MB231, and A549 cancer cell lines, demonstrating the potential application of this approach in developing novel boron-containing pharmaceuticals.     

Single and double Suzuki-Miyaura couplings with symmetric dihalobenzenes

[reaction: see text] m- or p-Diiodobenzene undergoes selective double coupling reactions with arylboronic acids and esters. Selectivity for double coupling over single coupling is remarkably strong: even with a diiodobenzene:monoboronic acid ratio of 10:1, the products of double coupling are formed in good yields. Steric hindrance and electronic influences of the boronic acid or ester, and reaction conditions do not appear to impact significantly upon the outcome of the reaction. In contrast, m- and p-dibromobenzenes undergo single couplings with aryl boronic acids with high selectivity.     

Substitution and condensation reactions with poly(anilineboronic acid): reactivity and characterization of thin films

Poly(anilineboronic acid) thin films are treated under various conditions to achieve substitution or condensation reactions involving the boronic acid moiety. These reactions are studied with polarization modulated infrared reflection absorption spectroscopy, cyclic voltammetry, and UV-vis spectroscopy. The results suggest the single-step formation of substituted polyanilines, such as poly(hydroxyaniline), halogenated polyanilines, and mercury chloride-substituted polyaniline. A condensation reaction of poly(anilineboronic acid) with cis-diol compounds in aqueous solution, as well as with phenylenebisboronic acid and salycilamide in THF, indicates the formation of boronic esters. The latter reactions appear to be a good entry point for the formation of complex or supramolecular polymer structures.     

Highly specific-glucose fluorescence sensing based on boronic anthraquinone derivatives via the GOx enzymatic reaction

The boronic acid anthraquinones, oHAQB and pHAQB, have been designed, and demonstrated to serve as fluorogenic biosensors for glucose. The sensory molecule, oHAQB, has exhibited the specific-glucose sensing via the GOx enzymatic reaction. In this contribution, the fluorescence changes of oHAQB reasonably correspond to the concentration of glucose upon the conversion of boronic acid to hydroxy based sensor by H₂O₂ generated from glucose along with GOx enzymatic reaction. Our sensing ensemble was then successfully applied to determine the glucose concentration in the range of 0.08–0.42 mM. The limit of detection (LOD) of oHAQB for glucose detection using the GOx enzymatic probe is approximately 0.011 mM.     

A new saccharide sensor based on a tetrathiafulvalene-anthracene dyad with a boronic acid group

[reaction: see text] A new saccharide sensor based on a tetrathiafulvalene-anthracene dyad with a boronic acid group was designed and synthesized. Our study employed the tetrathiafulvalene (TTF) unit as the electron-rich group in the saccharide sensor instead of an amine group, and this new sensor detects fructose with good selectivity.