Dry ice-originated supercritical and liquid carbon dioxide extraction of organic pollutants from environmental samples

Packed in a high-pressure vessel and under calculated conditions, dry ice can be used as a source of carbon dioxide for supercritical CO₂ extraction or liquid CO₂ of organic compounds from environmental samples. Coupled with a fluid modifier such as toluene, dry ice-originated supercritical CO₂ (Sc CO₂) achieves quantitative extraction of many volatile organic compounds (VOCs) and semivolatile organic compounds (SOCs) including polycyclic aromatic hydrocarbons (PAHs), n-alkanes, and polychlorinated biphenyls (PCBs) from solid matrices. Compared to contemporary manual or automated supercritical fluid extraction (SFE) technologies, this novel technique simplifies SFE to a minimum requirement by eliminating the need of a high-pressure pump and any electrical peripherals associated with it. This technique is highly suitable to analytical areas where sample preservation is essential but difficult in the sampling field, or where sample collection, sample preparation, and analysis are to be done in the field.     

Application of Supercritical fluid Extraction For Analysis of Organophosphates in Cereals

Abstract

Application of supercritical fluid extraction (SFE) utilizing pure carbon dioxide for selective isolation of organophosphates from contaminated cereals has been tested.

At the beginning of the experiments the extractability of added standards from an empty extraction vessel (thimble) and from various materials such as filter paper, sand, Celite and anhydrous sodium sulfate was tested to estimate the behavior of organophosphates. Further method development was carried out using a spiked sample of flour, which was analyzed within the proficiency testing for organophosphorus pesticides analysis (round 7) organized by Food Analysis Performance Assessment Scheme (FAPAS, MAFF-UK).

Comparison of the SFE method with a classical method currently employed for sample preparation (i.e. extraction with acetone/methanol mixture followed by gel permeation chromatographic clean up) showed advantages of the SFE technique such as simplification of the sample preparation step and thereby significant speeding up of the determination of organophosphates in cereals.     

Monitoring polychlorinated biphenyls in pine needles using supercritical fluid extraction as a pretreatment method

This paper reports on the first use of supercritical fluid extraction (SFE) of polychlorinated biphenyls (PCBs) from pine needles. Supercritical carbon dioxide was used as extraction fluid, and exhibited good extraction efficiencies and recoveries (>90%). GC-MS (selected ion monitoring mode) achieved both accurate identification and quantification of the PCBs. Compared with traditional time consuming multi-step sample preparation methods, SFE with carbon dioxide is easier to perform, and is a feasible alternative extraction procedure for the monitoring of PCBs in pine needle samples.     

一种新型超临界流体萃取-高效液相色谱在线联用系统的构建

天然产物研究一直是植物学、化学和药学的重要研究领域．通过从天然产物中寻找生物活性成分和先导物是创制新药的有效途径之一．有效成分的提取是天然产物研究中最基本和最关键的环节．超临界流体萃取（Supercritical fluid extraction,简称SFE）是近年来发展较快的一种新型样品提取技术．超临界CO2作为最常用的萃取剂已被用于天然药物中非极性和弱极性有效成分的提取,尤其是挥发性和热敏性的物质．此外,通过加入适当的添加剂还可有效地萃取极性化合物,和传统的化学方法相比,     

超临界流体萃取与其它分析技术的联用

用超临界流体萑取进行分析样品处理，有快速，高效，低消耗，污染少等优点。本文对ＳＦＥ的原理，特点，与其它技术的联用及其在分析化学诸领域的应用作了综述，其中重点介绍了ＳＦＥ与色谱技术的在线联用，内容包括接口等。     

Supercritical fluid extraction in plant essential and volatile oil analysis

The use of supercritical fluids, especially carbon dioxide, in the extraction of plant volatile components has increased during two last decades due to the expected advantages of the supercritical extraction process. Supercritical fluid extraction (SFE) is a rapid, selective and convenient method for sample preparation prior to the analysis of compounds in the volatile product of plant matrices. Also, SFE is a simple, inexpensive, fast, effective and virtually solvent-free sample pretreatment technique. This review provides a detailed and updated discussion of the developments, modes and applications of SFE in the isolation of essential oils from plant matrices. SFE is usually performed with pure or modified carbon dioxide, which facilitates off-line collection of extracts and on-line coupling with other analytical methods such as gas, liquid and supercritical fluid chromatography. In this review, we showed that a number of factors influence extraction yields, these being solubility of the solute in the fluid, diffusion through the matrix and collection process. Finally, SFE has been compared with conventional extraction methods in terms of selectivity, rapidity, cleanliness and possibility of manipulating the composition of the extract.     

食品中农药残留分析的样品前处理技术进展*

本文综述了近年来食品中农药残留分析的样品前处理技术,重点对超临界流体萃取法在食品农药残留分析中的应用及其联用技术进行了评述;同时对固相微萃取、微波辅助萃取和凝胶渗透色谱法进行了总结。对食物中农药残留分析技术的发展方向进行了讨论。     

Qualitative supercritical fluid extraction coupled to capillary gas chromatography

The usefulness and ease of utilizing supercritical fluid extraction (SFE) directly coupled to capillary gas chromatography (GC) as quantitative or qualitative analytical problem-solving tools will be demonstrated. As an alternative to conventional liquid solvent extractions, SFE presents itself as a means to achieve high extraction efficiencies of different compounds in complex solid matrices in very rapid tims frames. Moreover, SFE has an additional advantage of being able to achieve distinct extraction selectivities as a function of the solubilizing power of the supercritical fluid extracting phase. For on-line SFE/GC, the extraction effluent is directly transferred to the analytical chromatograph. On-line SFE/GC involves the decompression of pressurized extraction effluent directly into a heated, unmodified capillary split injection port of the GC. In this respect, SFE introduction into GC can be used as an alternative means of GC injection, comparable to such modes of injection as pyrolysis and thermal desorption. This paper will show applications of SFE/GC where mass spectrometric detection together with flame ionization detection was used for component identification from environmental, tobacco, and petroleum matrices.     

Supercritical fluid extraction in herbal and natural product studies - a practical review

Due to increasingly stringent environmental regulations, supercritical fluid extraction (SFE) has gained wide acceptance in recent years as an alternative to conventional solvent extraction for separation of organic compounds in many analytical and industrial processes. In the past decade, SFE has been applied successfully to the extraction of a variety of organic compounds from herbs and other plants. This review article presents the practical aspects of SFE applications in sample preparation, selection of modifiers, collection methods, on-line coupling techniques, means for avoiding mechanical problems, and approaches to optimization of SFE conditions. SFE can also be used to clean up pesticides from herb medicines. SFE processes can be modeled to acquire useful information for better understanding of the extraction, mechanisms and optimization of the extraction procedures. With increasing public interest in natural products, SFE may become a standard extraction technique for studying herbal, food and agricultural samples.     

A Unified Sample Preparation System for Extraction of Various Analyte/Matrix Combinations

A supercritical fluid extraction/enhanced solvent extraction system (SFE/ESE) was used to remove polar and non-polar analytes from various matrices. Extraction of environmental pollutants from soil, additives from low density polyethylene, sulfa drugs from animal tissue, and drug from tablet was performed using both SFE and ESE. Results showed that a single instrumental system can be used to perform both ESE with organic solvents and SFE with carbon dioxide-based fluids. Each method has its own unique advantages and applications. The ability to carry out both solvent extraction and supercritical fluid extraction with one system has obvious economical advantages.     

Recent advances in sample introduction for supercritical fluid chromatography

New strategies for sample introduction in supercritical fluid chromatography are reviewed. Both open tubular and packed column systems are examined as the injection demands of each column type are addressed. In addition to advances made in solvent injection methods, supercritical fluid extraction (SFE) is discussed as a solventless injection technique for supercritical fluid chromatography.     

Improved SFE recovery of trace analytes from liver using an integral micrometering valve–SPE column holder assembly

A novel integral restrictor–collector has been designed for use with a conventional supercritical fluid extraction (SFE) apparatus. The assembly reduces the path length between a micrometering valve and collector (a solid phase extraction (SPE) column), obviating the need for the complicated tubing and connectors usually associated with such devices. Also described is a heating-block assembly which encases the micrometering valve and provides uniform heating of the valve during extraction. The valve–SPE column assembly was part of a system used to perform the first reported SFE multi-residue drug recovery from fortified liver. Extractions used carbon dioxide pressurized to 690 bar as the supercritical fluid. Flow rates of expanded gas through the SPE columns were 3–4 L/min with concomitant quantitative trapping of the analytes on the sorbent bed. After SFE the three nitrobenzamide antimicrobial drug residues from the liver were eluted from the SPE columns by off-line analysis. The results demonstrated that losses of trace level analytes in tissue may be significantly reduced by including an integral metering valve-collector assembly as part of the SFE apparatus.     

Analysis of Petroleum Distillates from Fire Debris Using Supercritical Fluid Extraction with a Two‐Level Orthogonal Array Experimental Design

A supercritical fluid extraction (SFE) method was developed in the present study as an effective sample pretreatment technique of petroleum distillates from fire debris. Three petroleum distillates were used as target analytes, including 95 unleaded gasoline, kerosene, and premium diesel. An orthogonal array (L16) experimental design was adopted to separately evaluate primary SFE experimental factors. The SFE efficiencies of petroleum distillates at various extraction conditions were examined and the optimized SFE conditions were identified. Experimental results demonstrated that the optimized SFE method not only provided an effective extraction method for the spiked sample, but also successfully recovered residues of petroleum distillates from fire debris.     

Supercritical fluid extraction of oxadixyl from food crops

Summary This work describes the study of a degradation curve of Oxadixyl in field-treated potato and tomato samples. The residues were extracted using classical and supercritical fluid (SFE) extraction methods and analyzed by HRGC/ECD. The extraction techniques were compared and the results indicate the advantages of using SFE as an alternative method for pesticide analyses in these samples.     

A two-step supercritical fluid extraction of polycyclic aromatic hydrocarbons from roadside soil samples

A two-step procedure for the supercritical fluid extraction (SFE) of polycyclic aromatic hydrocarbons from soil samples was developed. The procedure consists of a static supercritical fluid treatment in a closed extraction cell at a high temperature (T=250 or 340degreesC for 20 min) and an SFE with a solvent trapping. During the static phase, the sample is exposed to a supercritical organic solvent (methanol, toluene, dichloromethane, ACN, acetone, and hexane). The solvent penetrates particles of the matrix to substitute strongly bonded molecules and dissolves the analytes in the supercritical phase. At ambient temperature, supercritical fluids became liquid and lost their solvation abilities. Most of the analytes condense on the surface of the particles or on the extraction cell walls without forming strong bonds or penetrating deep into the matrix. Thus, the pretreatment liberates the analytes and they behave similar to those in freshly spiked samples. The common SFE with toluene-modified CO2 as an extraction fluid follows the static phase. With the use of the most suitable extraction phases (toluene, ACN), the extraction efficiency of the combined procedure is much higher (approximately100%). The results of the combined procedure are compared to the SFE procedure of the same untreated sample (difference less than 5%) and to the Soxhlet extraction. The extracts were analyzed using a GC with the flame ionization detection.     

Phenolic-compound-extraction systems for fruit and vegetable samples

This paper reviews the phenolic-compound-extraction systems used to analyse fruit and vegetable samples over the last 10 years. Phenolic compounds are naturally occurring antioxidants, usually found in fruits and vegetables. Sample preparation for analytical studies is necessary to determine the polyphenolic composition in these matrices. The most widely used extraction system is liquid-liquid extraction (LLE), which is an inexpensive method since it involves the use of organic solvents, but it requires long extraction times, giving rise to possible extract degradation. Likewise, solid-phase extraction (SPE) can be used in liquid samples. Modern techniques, which have been replacing conventional ones, include: supercritical fluid extraction (SFE), pressurized liquid extraction (PLE), microwave-assisted extraction (MAE) and ultrasound-assisted extraction (UAE). These alternative techniques reduce considerably the use of solvents and accelerate the extraction process.     

GC-MS of volatile components of Schisandra chinensis obtained by supercritical fluid and conventional extraction

In this paper, the volatile compounds of Schisandra chinensis obtained by different extraction techniques including supercritical fluid extraction (SFE), steam distillation (SD), Soxhlet extraction (SE) and ultrasound-assisted extraction (UAE) were investigated for the first time. The sample preparation procedure for GC-MS analysis of the volatile compounds was optimized and then 37, 45, 27 and 37 compounds were identified in the samples obtained by SFE, SD, SE and UAE methods, respectively. As the therapeutic effect of the traditional Chinese medicine is usually based on multifarious essential components or the combination of them instead of only one component, the volatile compounds were compared in groups with the extracts by SE, SD and UAE. This would be more reasonable to evaluate the effects of an alternative technique to extracting multifarious essential components. Among the identified components in the SFE extract, 32 compounds were the same as that by three conventional methods, accounting for 90.5% of the volatile compounds identified. However, as the volatile compounds were classed into groups, it was easy to see that the Schisandra chinensis oil extracted by SFE was made up largely of aromatics and sesquiterpenoids (52.1 and 27.6%, respectively), with less amounts of monoterpenoids and other compounds, distinguishing SFE from the conventional extractions.     

Supercritical fluid extraction of 2,3,7,8-tetrachlorodibenzo-p-dioxin from sediment samples

Supercritical fluid extraction (SFE) is a promising technique for the extraction of 2,3,7,8-tetrachlorodibenzo-p-dioxin (2,3,7,8-TCDD) from environmental matrices such as contaminated sediments. The ability of SFE to solubilize many organic contaminants is well documented in industrial processes but its analytical applications were exploited just recently. In this study supercritical carbon dioxide and nitrous oxide and their mixtures with 2% methanol were used to extract 2,3,7,8-TCDD from aquatic sediments. An attractive feature of this process is that the carbon dioxide, being a virtually inert fluid, leaves no solvent residue on the processed sediment. Almost 100% of the 2,3,7,8-TCDD can be extracted from a sediment spiked with 200 μg/kg 2,3,7,8-TCDD in 30 minutes by using supercritical carbon dioxide + 2% methanol. Cleanup procedure is compared with the Soxhlet extraction procedure currently used as a standard method for extracting dioxins from sediment samples.     

超临界流体萃取在天然药物分析中的应用

按物质的不同性质综述了１９９５年以来超临界流体萃取技术在天然药物分析中的一些进展情况,常见的分析主要包括萜类、生物碱、黄酮类、挥发油及苯丙素类。超临界流体萃取作为一门新型的样品前处理技术,在天然药物的分离分析中展示了其特有的优点。该技术操作温度低,不会引起热敏性的分解变质;使用的有毒溶剂少,从而减少化学药品对药物的污染。     

Selected uses of enzymes with critical fluids in analytical chemistry

The use of enzymes coupled with supercritical fluid (SF)-based analytical techniques, such as supercritical fluid extraction (SFE), provides a safer environment platform for the analytical chemist and reduces the use of organic solvents. Incorporation of such techniques not only reduces the use of solvent in analytical laboratories, but it can also lead to overall method simplification and time savings. In this review, some of the fundamental aspects of using enzymes in the presence of SF media are discussed, particularly the influence of extraction (reaction) pressure, temperature, and water content of the extracting fluid and/or the sample matrix. Screening of optimal conditions for conducting reactions in the presence of SF media can be readily accomplished with automated serial or parallel SFE instrumentation, including selection of the proper enzyme. Numerous examples are cited, many based on lipase-initiated conversions of lipid substrates, to form useful analytical derivatives for gas chromatography, liquid chromatography, or SF chromatography analysis. In certain cases, enzymatic-aided processing of samples can permit the coupling of the extraction, sample preparation, and final analysis steps. The derived methods/techniques find application in nutritional food analyses, assays of industrial products, and micro analyses of specific samples.