用于高温射频超导量子干涉器的介质谐振器的性质研究

介质谐振器是目前高温射频超导量子干涉器较常采用的一种高品质因数微波谐振器.它是由10 mm×10 mm×1 mm的SrTiO₃(STO)标准衬底及覆盖在其上的YBa₂Cu₃O_7-δ(YBCO)薄膜磁通聚焦器共同构成的.为探明磁通聚焦器构形对介质谐振器谐振频率的影响,本文采用Ansoft公司出品的HFSS高频结构仿真软件对磁通聚焦器构形不同的若干介质谐振器的谐振特性进行了仿真.结果表明:增大磁通聚焦器开     

O3+与H2碰撞中非解离电荷转移过程的全量子计算

应用全量子的分子轨道强耦合方法，研究了基态的O³⁺(2s²2p ²P)与氢分子碰撞的非解离电荷转移过程，计算了不同方位角(25°，45°，89°)，能量分别为100，500，1000和5000eV/u时的单电子俘获的振动分辨的态选择截面及相应的微分截面.分子轨道强耦合计算中采用了自旋耦合价带理论计算的三原子分子势能面和径向耦合矩阵元.对氢分子的自身转动，采用无限阶的冲量近似方法；对体系的电子运动同H₂或H^+<     

同步辐射X射线成像光束线劳厄双晶单色器设计

上海光源X射线成像光束线采用多极扭摆器(wiggler)作为辐射光源, 提出一种劳厄双弯晶单色器的设计方案. 计算结果显示, 可获得固定出口的平行单色光束, 能量调谐范围覆盖19—120keV, 在33keV时, 输出光子通量及通量密度分别为1.9×10¹³phs/s和3.8×10¹⁰phs/s/mm². 分析了劳厄晶体的聚焦及单色化性能, 计算了输出光子通量及单色器的热负载情况. 与传统的双平晶方案相比, 本设计在获得高通量和解决热负载等方面有明显的优越性, 并能有效控制热形变.     

Cs2 NaMF6(M=Al,Ga):Cr3+络合分子体系局域结构和基态分裂的理论研究

采用双自旋轨道耦合系数模型并结合完全能量矩阵的方法对Cs₂NaMF₆(M=Al, Ga):Cr³⁺ 体系中Cr³⁺ 离子的基态分裂和局域结构进行了研究.通过模拟光谱和EPR谱确定了Cr³⁺ 取代 M³⁺ 形成的两种占位结构的畸变角,发现用双自旋轨道耦合系数模型与单自旋轨道耦合系数模型计算出的畸变角Δθ存在较大的差异.这表     

关于光激射器的线宽

本文从描述光激射器工作的基本方程出发,讨论了光激射器光束线宽的“短期”(short-time)部分。通常都以下式描写这部分线宽:△v_s=(8πhv(△v′)²)/P,(1)其中△v′是谐振腔电磁模的半宽度;v为光束频率;P为输出功率。我们的主要结论可以归结为以下三点:(1)线宽主要是由与电磁模耦合的耗散体系引起的,与分子耦合的耗散体系的贡献是可以忽略的;(2)在单模近似下,只要分子的线宽比电磁模的线宽大得多,则(1)式是正确的;(3)如果多模谐振腔中激发模与其他模之间的相互作用是强的,则式(1)将被推广为 △v_s=(8πhv(△v′)²)/P+(4hv(△v′))/P somefromn=(λ′≠λ)(r_λλ′²/(rλ′),(2) 其中r_λλ′是相关弛豫系数;r_λ′是模λ′的线宽。在某些情况下,式(2)中第二项可以比其第一项还大。所以,这可能是目前关于线宽的实验结果与由式(1)计算结果不相符合的原因之一。     

Au2Gen-/0 (n=1∽8)团簇结构演化和电子性质的光电子能谱和理论计算研究

本文利用尺寸选择的负离子光电子能谱和理论计算探索Au₂Ge_n^-/0 (n=1∽8)团簇的结构演化和电子性质. 通过比较理论模拟谱与实验谱,并使用CCSD(T)理论方法计算异构体的相对能量,从而确定金锗混合团簇的全局最小结构. 本文发现Au₂Ge_n^-/0 (n=1∽8)团簇的两个Au原子具有较高的配位数和较弱的亲金相互作用. 负离子团簇和中性团簇的最稳定结构分别处于自旋双重态和自旋单重态. 除了Au₂Ge₄^-/0和Au₂Ge₅^-/0,负离子团簇和中性团簇的全局最小结构具有相似的结构特点. Au₂Ge₁^-/0团簇是一个C_2v对称的V形结构,而Au₂Ge₂^-/0团簇是一个C_2v对称的双桥连结构. Au₂Ge₁^-负离子团簇是两个Au原子盖帽的Ge₄四面体结构,而Au₂Ge₄中性团簇是两个Au原子盖帽的Ge₄菱形结构. Au₂Ge_5∽8^-/0团簇主要采用三棱柱、四棱柱、及五棱柱结构. Au₂Ge₆是一个C_2v对称的四棱柱结构,并表现出σ和π双键性质.     

Wn(n=3—27)原子团簇结构的第一性原理计算

使用密度泛函理论下的第一性原理方法，对W_n原子团簇(n=3—27)的结构特性进行了理论计算. 得到了W_n团簇(n=3—7)的最低能量结构和(n=8—27)的局域能量极小的典型结构. 使用凝胶模型，提出的电子组态1s²1p⁶1d¹⁰2s²1f¹⁴2p⁶3s     

J/ψ辐射衰变中θ(1720)宽共振峰的矩分析

本文用矩分析法对J/ψ辐射衰变产生的θ(1720)宽共振峰的结构进行了研究.由于f'₂(1525)和θ(1720)二共振峰有重迭,为此我们讨论了2⁺⁺(f'₂(1525))+0⁺⁺+0⁺⁺和2⁺⁺(f'₂(1525))+0⁺⁺+2⁺⁺二种三态耦合结构模式,这对于弄清θ(1720)这个宽共振峰的结构,确定可能包含在其中的二个共振态,例如G(1590)和f₂(1720)的质量、宽度、自旋以及其它重要性质,进一步认识这二个令人关注的共振态是有帮助的.     

小尺寸VmOn+团簇的激光光解和密度泛函计算

通过激光溅射法产生了V₂O_n⁺ (n=1, 2), V₃O_n⁺ (n=1, 2, 3)和V₄O₃⁺等缺氧的钒氧团簇,并采用532和266 nm波长的激光对它们进行了光解研究. 利用密度泛函理论计算与激光光解实验相结合确定了这些团簇的几何结构和可能的光解通道. 激光光解实验表明V相似文献   

几种纤锌矿相硫族和磷族半金属铁磁体磁电性能的第一性原理

采用基于密度泛函理论中的广义梯度近似的第一性原理研究, 优化了纤锌矿结构化合物CrX(X=As、Sb、O、Se和Te)的几何结构, 并详细计算了它们的磁电性能． 结果表明, 这些磷族或硫族化合物在费米面处的自旋极化率均为100%, 分子磁矩分别为整数3.00和4.00 μB; 分子磁矩主要来自于Cr离子; 磷族和硫族化合物中存在亚铁磁性耦合; 它们的居里温度均较高; 磷族和硫族化合物中Cr离子的电子结构分别为a²_1g↑↓t⁴_1u↑↓t¹_1u↑e²_g↑和a²_1g↑↓t⁴_1u↑↓t¹_1u↑t³_2g↑.     

Triband phase shifter design using split-ring resonator and complementary split-ring resonator-loaded ground plane for wireless applications

This paper presents the design of a novel linear analog planar phase shifter deploying split-ring resonator (SRR) and complementary split-ring resonator (CSRR) structures. Based on the advantages of these structures, a triband phase shifter is designed for multiple target systems to operate at 0.85, 1.69, and 2.46 GHz bands finding applications for European RFIDs, Satellite Radio Broadcast System, Mobile Services, and ISM Band, respectively. The effect of SRR and CSRR coupling with host transmission line is also analyzed on the basis of Bloch mode theory and the modes are validated through Eigen mode analysis. The proposed phase shifter design shows a good agreement between simulated and measured results. A 90^° ± 8^° shift in phase is observed at lower and upper bands, and a 135^° ± 8^° shift is observed in center band with reasonable group delay components.     

大有效面积的高Tc rf SQUID

关键词： c rf SQUID')" href="#">高T_c rf SQUID 新型结构 大有效面积 磁通聚焦器     

New dual-mode square patch bandpass filter using CSRR slot-type perturbation

A compact dual-mode microstrip bandpass filter using square-patch resonator and a new perturbation element is designed in this letter. This new slot-type element is composed by a complement split-ring resonator (CSRR) with two pairs of etching slots. The nature of coupling between the degenerate modes is investigated with respect to the perturbation size. By proper arranging the orientations of the CSRRs, new coupling characteristics can be obtained. The proposed dual mode bandpass filters are designed, and simulated. The simulation and measure results of proposed bandpass filter are reasonable.     

A new type of HTc superconducting film comb-shape resonator for radio frequency superconducting quantum interference devices

A new type of HTc superconducting film combshape resonator for radio frequency superconducting quantum interference devices (RF SQUID) has been designed. This new type of superconducting film comb-shape resonator is formed by a foursquare microstrip line without a flux concentrator. The range of the center frequency of this type of resonator varies from 800 MHz to 1 300 MHz by changing the length of the teeth. In this paper, we report on simulating the relationship of the value of the center frequency and the length of the teeth, and testing the noise of HTc RF SQUID coupling this comb-shape resonator. __________ Translated from Chinese Journal of Low Temperature Physics, 2005, 27(3) (in Chinese)     

Analysis of a second-order polarization-independent filter made of a single ring resonator and a Sagnac interferometer

A novel second-order polarization-independent filter made of a single ring resonator and a Sagnac interferometer (SRRSI) is proposed, and its filtering characteristics are investigated. By using birefringence in waveguide, a single ring resonator can be used to synthesize a filter with second-order response. Analytical formulas are derived for characteristics of the SRRSI varied with waveguide parameters, such as the coupling coefficient; and the critical condition of a second-order Butterworth filter is given. The influence of loss in the ring resonator is also analyzed.     

Design and implementation of dual-band antennas based on a complementary split ring resonators

A simple dual-band antenna design and implementation method is proposed in this work, based on the equivalent media properties inspired by resonant metamaterial elements. The equivalent circuit model of dual-band patch antennas based on a complementary split ring resonator (CSRR) is presented and validated. The dual-band patch antenna is designed etching a CSRR in the patch of a conventional rectangular microstrip patch antenna. The first resonance is governed by the quasi-static resonance of the CSRR while the second resonance is originated by the rectangular patch. The fact of etching a CSRR on a rectangular patch antenna also produces a miniaturization of a conventional patch antenna. The equivalent circuit model proposed in this letter is sound in order to understand the functionality of dual-band patch antennas based on a CSRR. Good agreement between simulation, equivalent circuit model and experimental results is shown and discussed. These results lead the equivalent circuit model to become a simple and straightforward tool for the design of this type of multiband antennas, of low cost and versatile operation for a broad range of wireless communication systems.     

光学微盘腔与三能级量子点系统中的模耦合研究

用一种全量子理论方法研究了波导、光学微盘腔与三能级量子点耦合系统的动力学过程,求出其耦合后的透射模和反射模的解析解. 由于微腔表面粗糙引起反向散射,在微腔内形成两简并回音壁耦合共振模,其耦合率为β;量子点的两激发态分别以耦合率g₁,g₂与回音壁耦合共振模产生耦合. 在实数空间里,得出透射光谱和反射光谱的数值解,这些三能级模型结果比二能级模型结果更接近真实光学微盘腔系统,能更好地显示耦合系统的动力学特性. 关键词： 模耦合 光学微盘腔 三能级量子点 全量子理论     

Calibration method for ESR signal intensity of calcitic shells

A practical method of calibrating intensities of ESR signals with a single crystal of copper pentahydrate (CuSO₄ · 5H₂O) has been developed for calcitic shells containing a large amount of manganese (Mn²⁺). A sample holder is designed to insert the crystal from the bottom of the cavity for use as a standard sample. The signal of Cu²⁺ in the standard does not interfere with the Mn²⁺ signals. The Cu²⁺ signal and dating signal of the shell are recorded simultaneously; the ratio of their intensities is the basis for calibration. It is shown that this calibration method reduces the errors attributed to both coupling and unloadedQ factors of the cavity resonator to within 2%.     

High-Speed Quantum Transducer with a Single-Photon Emitter in a 2D Resonator

Quantum transducers can transfer quantum information between different systems. Microwave–optical photon conversion is important for future quantum networks to interconnect remote superconducting quantum computers with optical fibers. Here, a high-speed quantum transducer based on a single-photon emitter in an atomically thin membrane resonator, that can couple single microwave photons to single optical photons, is proposed. The 2D resonator is a freestanding van der Waals heterostructure (which may consist of hexagonal boron nitride, graphene, or other 2D materials) that hosts a quantum emitter. The mechanical vibration (phonon) of the 2D resonator interacts with optical photons by shifting the optical transition frequency of the single-photon emitter with strain or the Stark effect. The mechanical vibration couples to microwave photons by shifting the resonant frequency of an LC circuit that includes the membrane. Thanks to the small mass of the 2D resonator, both the single-photon optomechanical coupling strength and the electromechanical coupling strength can reach the strong coupling regime. This provides a way for high-speed quantum state transfer between a microwave photon, a phonon, and an optical photon.     

Anticrossing phenomena in a resonator with 2D electrons on liquid helium

We have investigated the details of the eigenmode for a resonator containing a two-dimensional electron system (2DES) formed on the surface of liquid helium. We show that anticrossing phenomena occur near the crossing point ω₀=ω_c, where ω₀ is the eigenmode of the resonator and ω_c is the cyclotron frequency. The structure of the coupling constant is established. It is a flexible parameter, i.e., sensitive especially to magnetic field and electron density. A finite coupling leads to a perturbation, δω, of the eigenmode of the resonator in presence of the 2DES. Corresponding calculations and measurements of δω are presented. The theory fits the experimental data. The influence of anticrossing on the cyclotron resonance absorption line shape is demonstrated.