中孔MCM-41负载Ru纳米粒子催化剂用于超声辐射下芳烃选择氧化反应

以中孔MCM-41为载体制得均一分散的粒径约5nm的Ru纳米粒子催化剂MCM-41-Ru,采用电感耦合等离子体、透射电镜、能量散射谱、X射线衍射和N2吸附-脱附法对其进行了表征,并将其作为可重复使用高效催化剂用于超声辅助芳烃选择氧化反应.结果表明,在超声辐射和KBrO3为氧化剂条件下,MCM-41-Ru催化剂加速了氧化反应,并以较高产率得到目的产物.回收的催化剂用于下次反应时活性保持不变,但其活性中心性质发生变化.     

Pd/NH2C3H6-MCM-41催化水介质中的碘苯Ullmann反应

 采用室温共缩聚法合成了胺基改性MCM-41杂化材料(NH2C3H6-MCM-41), 并以此材料为载体制备了负载型Pd催化剂 (Pd/NH2C3H6-MCM-41). 采用X射线衍射、核磁共振、红外光谱、透射电镜、X射线光电子能谱和N2吸附等方法对催化剂进行了表征. 结果表明,催化剂仍保持有MCM-41的孔结构,但其有序度随着 NH2C3H6-基团和Pd含量的增加而降低. 催化剂在以水为溶剂的碘苯偶联反应(Ullmann反应)中显示出优良的催化性能,联苯收率可达63%, 有望为清洁有机合成提供高效非均相催化剂. 胺基修饰的促进作用可归因于催化剂Pd分散度的提高和表面化学性质的改变.     

中孔MCM-41负载Ru纳米粒子催化剂用于超声辐射下芳烃选择氧化反应（英文）

以中孔MCM-41为载体制得均一分散的粒径约5 nm的Ru纳米粒子催化剂MCM-41-Ru,采用电感耦合等离子体、透射电镜、能量散射谱、X射线衍射和N_2吸附-脱附法对其进行了表征,并将其作为可重复使用高效催化剂用于超声辅助芳烃选择氧化反应.结果表明,在超声辐射和KBrO_3为氧化剂条件下,MCM-41-Ru催化剂加速了氧化反应,并以较高产率得到目的产物.回收的催化剂用于下次反应时活性保持不变,但其活性中心性质发生变化.     

TiO_2/MCM-41催化苯酚与碳酸二甲酯邻位烷基化研究

采用等体积浸渍法制备了一系列Ti O_2/MCM-41催化剂,并对其进行X射线衍射、N2吸附-脱附、吡啶吸附红外光谱、NH3程序升温脱附和CO_2程序升温脱附等手段对Ti O_2/MCM-41催化剂的结构性质进行了表征。在气相连续流动固定床反应器上,对催化剂催化性能进行了评价,并研究了催化剂结构及酸碱性对苯酚甲基化反应合成邻甲酚的影响。结果表明:MCM-41经Ti O_2改性后,Ti O_2/MCM-41催化剂上Lewis酸中心和弱碱性中心的数量都不断增加,催化剂酸碱中心的存在明显提高苯酚邻位甲基化反应的活性和邻甲酚选择性。过高的酸中心和碱中心数量会引起邻甲酚的进一步邻位甲基化。最佳工艺条件下,苯酚转化率为85.8%,邻甲酚选择性为60.1%。     

镍(II)配合物官能化的MCM-41催化分子氧环氧化苯乙烯

制备了镍(II)席夫碱配合物官能化的MCM-41多相催化剂MCM-41-Ni.利用X射线粉末衍射、氮气物理吸附脱附、红外光谱、热重、电感耦合等离子体原子发射光谱、元素分析和透射电镜等方法对催化剂进行了表征.以氧气为氧化剂,MCM-41-Ni在催化环氧化苯乙烯的反应中表现出较高的催化活性;苯乙烯的转化率为95.2%,环氧苯乙烷的选择性为66.7%.系统地研究了反应温度、催化剂用量、溶剂以及反应时间对反应性能的影响.催化剂经过4次循环仍然表现出较好的稳定性和催化活性.     

微波法制备SO_4~(2-)_/TiO_2催化剂及其光催化氧化性能

采用微波法、混合加热法和常规加热法制备 SO_4~(2-)/TiO_2催化剂 ,运用 XRD、 BET、 DRS及 LRS光谱测定等技术对催化剂的结构进行了表征 ,并以光催化降解 C2H4为模型反应考察了不同制备方法对催化剂的光催化氧化反应性能的影响 .研究结果表明 ,微波法制备的 SO_4~(2-)/TiO_2催化剂的光催化氧化性能得到明显改善 ,对乙烯转化率为 80％ ,而混合加热法和常规加热法制备的样品乙烯转化率分别为 58％和 41％ .微波辐射制备的催化剂锐钛矿相含量高、比表面积大 ,光吸收阈值增大;并且拉曼散射光谱向低波数方向移动 ,有助于增加光致电子的跃迁几率 ,提高多相光催化过程的本征量子效率 .     

微波法制备SO2-4/TiO2催化剂及其光催化氧化性能

采用微波法、混合加热法和常规加热法制备/TiO2催化剂,运用XRD、BET、DRS及LRS光 谱测定等技术对催化剂的结构进行了表征,并以光催化降解C2H4为模型反应考察了不同制备 方法对催化剂的光催化氧化反应性能的影响.研究结果表明,微波法制备的/TiO2催化剂的光 催化氧化性能得到明显改善,对乙烯转化率为80％,而混合加热法和常规加热法制备的样品乙 烯转化率分别为58％和41％.微波辐射制备的催化剂锐钛矿相含量高、比表面积大,光吸收阈 值增大;并且拉曼散射光谱向低波数方向移动,有助于增加光致电子的跃迁几率,提高多相光 催化过程的本征量子效率.     

PtSn/Al2O3/MCM-41催化剂的丙烷脱氢催化性能

用微型催化反应装置评价, 并结合X射线粉末衍射(XRD)、表面积和孔结构测试、程序升温还原(TPR)、氢化学吸附和热重分析等方法研究了负载型PtSn/γ-Al2O3, PtSn/MCM-41和PtSn/Al2O3/MCM-41催化剂的丙烷脱氢反应催化性能. 发现PtSn/Al2O3/MCM-41催化剂具有较PtSn/MCM-41催化剂高的丙烷脱氢反应活性和较PtSn/γ-Al2O3催化剂高的反应稳定性. 实验结果表明, 纯硅MCM-41载体表面的锡物种因与载体相互作用较弱故易被还原, 导致铂金属分散度和催化剂的丙烷脱氢活性较低. 用Al2O3修饰MCM-41可以增强Sn物种与Al2O3/MCM-41载体之间的相互作用, 提高PtSn/Al2O3/MCM-41催化剂铂金属分散度和丙烷脱氢催化活性. 并且, 积炭后的PtSn/Al2O3/MCM-41催化剂具有较高的铂金属表面裸露度, 故具有较高的丙烷脱氢反应稳定性. PtSn/Al2O3/MCM-41催化剂优良的丙烷脱氢催化性能可能不仅与Sn-载体Al2O3/MCM-41较强的相互作用有关, 而且与Al2O3/MCM-41载体的介孔结构有关.     

MCM-41分子筛负载亚硒核过氧钨酸盐催化剂催化二苯并噻吩氧化脱硫

石油在作为燃料使用过程中常常产生各种污染,特别是油品中的含硫化合物不仅会降低油品品质,而且燃烧后产生的硫氧化物可污染大气,形成酸雨,危害人类健康.因此,油品深度脱硫是一项十分重要而紧迫的工作.
　　目前油品脱硫方法有很多种,主要分为加氢脱硫与非加氢脱硫.加氢脱硫反应条件苛刻,脱硫效率低,对设备要求高,因而非加氢脱硫正在被广泛研究.其中氧化脱硫反应条件温和,脱硫效率高,对设备要求不高,有望实现规模化应用.在氧化脱硫反应中,催化剂是研究重点,尤其是催化剂效率及可回收能力.本课题组合成的亚硒核过氧钨酸盐是一种具有高选择性和高催化活性的催化剂,但它在反应后无法实现回收再利用,从而限制了其广泛应用.为了提高该催化剂的可回收能力,本文尝试制备负载型亚硒核过氧钨酸盐用于氧化脱硫反应中,考察其催化效率及可回收能力.
　　分子筛具有孔结构,比表面积大且较为稳定,是理想的催化剂载体.本文采用浸渍法制备了MCM-41分子筛负载的亚硒核过氧钨酸盐,为了提高负载能力,减少催化剂溶脱,还制备了MCM-41-NH2分子筛负载的亚硒核过氧钨酸盐,并运用红外光谱、X射线衍射、N2吸附-脱附和透射电镜对它们进行了表征.结果显示,亚硒核过氧钨酸盐在MCM-41和MCM-41-NH2分子筛内分散均匀,表明负载成功.将负载型亚硒核过氧钨酸盐催化剂用于模拟油样二苯并噻吩(DBT)氧化脱硫实验,并用气相-火焰光度检测仪跟踪实验.结果表明,负载型和非负载型催化剂均具有较高的催化性能.模拟油样在负载型催化剂作用下氧化脱硫反应2 h后, DBT转化率达98.7%,实现了深度脱硫.此外,还优化了反应时间、反应温度及氧化剂和催化剂用量.与其它催化剂相比,在相似脱硫效率情况下,负载型催化剂的催化效率更高,反应条件更加温和,催化剂用量更少,因而更加环保和节能.对反应产物进行了红外光谱、气相-质谱联用分析以及气相色谱保留时间对比分析,结果表明DBT脱硫反应产物为DBTO2.结合相关文献,对该催化剂上DBT氧化脱硫提出了一种可能的催化氧化反应机理.
　　反应后将负载型催化剂回收过滤,洗涤和干燥后,进行下一轮氧化脱硫反应.结果表明, MCM-41分子筛负载的亚硒核过氧钨酸盐在循环使用过程中, DBT转化率下降较快,循环使用4次后, DBT转化率降至80%,而MCM-41-NH2分子筛负载的催化剂在循环使用4次后, DBT转化率仍达90%.这表明MCM-41-NH2分子筛负载的亚硒核过氧钨酸盐催化剂具有更好的稳定性和回收使用性能.
　　综上所述,负载型亚硒核过氧钨酸盐是一种高效的氧化脱硫催化剂,在较为温和的反应条件下即可实现深度催化氧化脱硫,其循环使用性能也得到明显提高.本结果可为该催化剂未来在工业上广泛应用提供一定参考.     

PtSn/Al2O3/MCM-41催化剂的丙烷脱氢催化性能

用微型催化反应装置评价,并结合X射线粉末衍射(XRD)、表面积和孔结构测试、程序升温还原(TPR)、氢化学吸附和热重分析等方法研究了负载型PtSn/γ-Al2O3,PtSn/MCM-41和PtSn/Al2O3/MCM-41催化剂的丙烷脱氢反应催化性能.发现PtSn/Al2O3/MCM-41催化剂具有较PtSn/MCM-41催化剂高的丙烷脱氢反应活性和较PtSn/γ-Al2O3催化剂高的反应稳定性.实验结果表明,纯硅MCM-41载体表面的锡物种因与载体相互作用较弱故易被还原,导致铂金属分散度和催化剂的丙烷脱氢活性较低.用Al2O3修饰MCM-41可以增强Sn物种与Al2O3/MCM-41载体之间的相互作用,提高PtSn/Al2O3/MCM-41催化剂铂金属分散度和丙烷脱氢催化活性.并且,积炭后的PtSn/Al2O3/MCM-41催化剂具有较高的铂金属表面裸露度,故具有较高的丙烷脱氢反应稳定性.PtSn/Al2O3/MCM-41催化剂优良的丙烷脱氢催化性能町能不仅与Sn-载体Al2O3/MCM-41较强的相互作用有关,而且与Al2O3/MCM-41载体的介孔结构有关.     

Oxo‐vanadium(IV) Schiff base complex supported on modified MCM‐41: a reusable and efficient catalyst for the oxidation of sulfides and oxidative S–S coupling of thiols

Oxo‐vanadium(IV) Schiff base complex supported on MCM‐41 as an organic–inorganic hybrid heterogeneous catalyst was synthesized with post‐grafting of MCM‐41 with 3‐aminoropropyltrimethoxysilane and subsequent reaction with 3,4‐dihydroxybenzaldehyde and then complexation with oxo‐vanadium acetylacetonate salt. The catalyst was analysed using a series of characterization techniques such as Fourier transform infrared spectroscopy, small‐angle X‐ray diffraction, nitrogen absorption isotherm, transmission electron microscopy and thermogravimetric analysis. The data collected provided evidence that the vanadium complex was anchored onto MCM‐41. High catalytic activity of this catalyst was observed in the oxidation of various sulfides and thiols (into sulfoxides and disulfides, respectively) with urea hydrogen peroxide as oxidant in high to excellent yields and selectivity under mild conditions. The heterogeneous catalyst could be recovered easily and reused several times without significant loss in catalytic activity and selectivity. Copyright © 2015 John Wiley & Sons, Ltd.     

Influence of the Synthesis pH on Sorption Behavior of Mesoporous MCM-41 for Toxic Metal Ions

Two samples of mesoporous MCM‐41 have been prepared in acidic and basic conditions with cetyltrimethylammonium bromide (CTAB) as template and characterized by powder X‐ray diffraction and N₂ adsorption‐desorption measurement to confirm the ordered mesoporous structure. Sorption of 21 toxic metal ions on these sorbents has been studied and discussed. The results show that distribution coefficient of Ba(II), Fe(III), Th(IV) on the synthesized MCM‐41 in basic condition and Cu(II), Pb(II), Zr(IV) on the synthesized MCM‐41 in acidic condition has been enhanced.     

Immobilization of cerium (IV) and erbium (III) in mesoporous MCM‐41: Two novel and highly active heterogeneous catalysts for the synthesis of 5‐substituted tetrazoles,and chemo‐ and homoselective oxidation of sulfides

Two well‐ordered 2D ‐ hexagonal cerium (IV) and erbium (III) embedded functionalized mesoporous MCM ‐ 41(MCM‐41@Serine/Ce and MCM ‐ 41@Serine/Er) have been developed via functionalization of mesoporous MCM ‐ 41. The surface modification method has been used in the preparation of serine‐grafted MCM ‐ 41 and led to the development of MCM‐41@Serine. The reaction of MCM‐41@Serine with Ce (NH₄)₂(NO₃)₆·2H₂O or ErCl₃·6H₂O in ethanol under reflux led to the organization of MCM‐41@Serine/Ce and MCM‐41@Serine/Er catalysts. The structures of these catalysts were determined using scanning electron microscopy, mapping, energy‐dispersive X‐ray spectroscopy, Fourier transform‐infrared, thermogravimetric analysis, X‐ray diffraction, inductively coupled plasma, and Brunauer–Emmett–Teller analysis. These MCM‐41@Serine/Ce and MCM‐41@Serine/Er catalysts show outstanding catalytic performance in sulfides oxidation and synthesis of 5‐substituted tetrazoles. These catalysts can be recycled for seven repeated reaction runs without showing a considerable decrease in catalytic performance.     

Investigations of Reactivity and Magnetic Properties of Nanostructured Iron Oxide within Mesoporous Silica Materials

The change in reactivity for nanostructured iron oxide within mesoporous silica materials is demonstrated. Iron oxides were incorporated into the pore system of MCM‐41 and MCM‐48 silica materials and characterized by powder X‐ray diffraction and nitrogen physisorption. Iron oxide shows significant changes in the reducibility by hydrogen compared to comparable bulk iron oxide phases. Partially reduced iron oxides within the mesoporous host were characterized by X‐ray absorption spectroscopy and SQUID measurements.     

Schiff base complexes of vanadium(III, IV, V) as catalysts for the electroreduction of O2 to H2O in acetonitrile

Fifteen Schiff base ligands were synthesized and used to form complexes with vanadium in oxidation states III, IV, and V. Electrochemical and spectral characteristics of the complexes were evaluated and compared. In acidified solutions in acetonitrile the vanadium(IV) complexes undergo reversible disproportionation to form V(III) and V(V) complexes. With several of the ligands the V(III) complexes are much more stable in the presence of acid than is the previously studied complex with salen, an unelaborated Schiff base ligand (H(2) salen = N,N'-ethylenebis(salicylideneamine)). Equilibrium constants for the disproportionation were evaluated. The vanadium(III) complexes reduce dioxygen to form two oxo ligands. The reaction is stoichiometric in the absence of acid, and second-order rate constants were evaluated. In the presence of acid some of the complexes investigated participate in a catalytic electroreduction of dioxygen.     

Titanium-salen complexes as initiators for the ring opening polymerisation of rac-lactide

A family of bis(iso-propoxide) titanium(IV) complexes supported by tetradentate Schiff base (salen) ligands has been synthesised and characterised, including a structural determination of N,N'-bis(6'-methylenimino-2',4'-di-tert-butylphenoxy)cyclohexyl-(1R,2R)-diamino titanium(IV) bis(iso-propoxide). Their suitability for initiating the ring-opening polymerisation of rac-lactide has been investigated. Polymerisation activities are shown to correlate with the electronic properties of the substituents within the salen ligand. In contrast to aluminium-salen initiators, electron-withdrawing substituents on the Schiff base ligand have a detrimental influence upon polymerisation activities, whereas the use of electron-donating alkoxy-functionalized ligands has allowed the highest recorded activity to date for a titanium-based initiator.     

Zirconium oxide complex‐functionalized MCM‐41 nanostructure: an efficient and reusable mesoporous catalyst for oxidation of sulfides and oxidative coupling of thiols using hydrogen peroxide

Zirconium oxide complex‐functionalized mesoporous MCM‐41 (Zr‐oxide@MCM‐41) as an efficient and reusable catalyst is reported for the oxidation of sulfides into sulfoxides using hydrogen peroxide (H₂O₂) as the oxidant, with short reaction times in good to excellent yields at room temperature under solvent‐free conditions. Also, a simple and efficient method is reported for the oxidative coupling of thiols into corresponding disulfides in good to high yields using H₂O₂ as oxidant in the presence of Zr‐oxide@MCM‐41 as recoverable catalyst in ethanol at room temperature. A series of sulfides and thiols possessing functional groups was successfully converted into corresponding products. After completion of reactions the catalyst was easily separated with simple filtration from the reaction mixture and reused for several consecutive runs without significant loss of catalytic efficiency. The mesoporous catalyst was characterized using Fourier transform infrared spectroscopy, Brunauer–Emmett–Teller surface area measurements, X‐ray diffraction, transmission and scanning electron microscopies, energy‐dispersive X‐ray spectroscopy and thermogravimetric analysis. Copyright © 2015 John Wiley & Sons, Ltd.     

Selective oxidation of ethylbenzene to acetophenone over Cr(III) Schiff base complex intercalated into layered double hydroxide

A new heterogeneous catalyst, Cr(III) Schiff base‐containing layered double hydroxide, was synthesized using the intercalation method. The Cr(III) Schiff base complex derived from 2‐hydroxy‐1‐naphthaldehyde and 4‐aminobenzoic acid was intercalated into the layered double hydroxide. The synthesized materials were characterized using inductively coupled plasma atomic emission spectrometry, energy‐dispersive X‐ray analysis, scanning electron microscopy, X‐ray diffraction, Brunauer–Emmett–Teller surface area measurement, Fourier transform infrared spectroscopy, thermogravimetric analysis, diffuse reflectance UV–visible spectroscopy and electron paramagnetic resonance spectroscopy. The catalytic activity was investigated for the oxidation of ethylbenzene with tert‐butylhydroperoxide as an oxidant under solvent‐free conditions as well as with lower chromium concentrations. In the oxidation reaction, ethylbenzene was oxidized to acetophenone and benzaldehyde. The catalyst was recycled ten times without significant loss of catalytic activity. Leaching studies performed with hot filtration experiments showed that the chromium catalyst was heterogeneous in nature and stable under the reaction conditions.     

埃洛石表面修饰并负载salen钼高效催化烯烃环氧化反应

采用温和的化学表面改性和自组装方法成功制备了埃洛石纳米管负载salen钼(HNTs-SL-Mo)催化剂,运用透射电镜、X射线衍射、红外光谱、诱导偶合等离子体谱和X射线光电子能谱表征了催化剂的形态、大小和分散性等性质。结果证明了salen结构的存在和埃洛石配位钼催化剂的成功制备。制备的催化剂在各种烯烃的环氧化反应中均有很好的活性,且活性高于均相催化剂。对比实验表明,在固定MoO(O2)2(DMF)2时, salen结构发挥了重要作用,不能用N原子作为单一配体来代替。本文还推测了钼和salen配体可能的连接方式和该催化剂催化烯烃环氧化反应的机理。该催化剂在重复使用8次后其活性未见明显下降,表现出优异的重复使用性能。由于埃洛石是一种廉价易得的材料,因此它可为设计效果独特的催化剂提供一个选择。     

Copper(I)‐N2S2‐salen type complex covalently anchored onto MCM‐41 silica: an efficient and reusable catalyst for the A3‐coupling reaction toward propargylamines

The immobilization of copper complexes by covalent anchoring of the ligand on the surface of mesoporous MCM‐41 has been described. Bis[2‐(phenylthio)benzylidene]‐1,2‐ethylenediamine as a new N₂S₂ donor salen‐type ligand was covalently anchored onto nanopores of MCM‐41 coordinated with copper (I) halide. The organic–inorganic hybrid material was achieved readily using 3‐mercaptopropyltrimethoxysilane as a reactive surface modifier. 2‐Nitrobenzaldehyde was reacted smoothly with the thiol moieties in order to form functionalized nanoporous silica with carbaldehyde groups. The resulting supported organic moieties were converted to thiosalen ligand and coordinated with CuX (X = CN, Cl, Br, I). Characterization of the heterogeneous catalyst by X‐ray diffraction, N₂ sorption, FT‐IR, diffuse reflectance UV‐visible and TGA techniques indicated successful grafting of the copper complex inside the nano‐channels of MCM‐41. The heterogenized catalyst was evaluated by the Mannich condensation reaction of aldehydes, amines and alkynes. In this reaction, the corresponding propargylamines were obtained as single products in good to excellent yields. Factors such as reaction temperature, solvent, catalyst loading, leaching and reusability of the catalyst also were discussed. The use of MCM‐41 as support permits an easier separation and recycles with only a marginal decrease in reactivity. Copyright © 2013 John Wiley & Sons, Ltd.