Star‐shaped cyclopolymers: A new category of star polymer with rigid cyclized arms prepared by controlled cationic cyclopolymerization and subsequent microgel formation of divinyl ethers

The combination of living/controlled cationic cyclopolymerization and crosslinking polymerization of bifunctional vinyl ethers (divinyl ethers) was applied to the synthesis of core‐crosslinked star‐shaped polymers with rigid cyclized arms. Cyclopolymerization of 4,4‐bis(vinyloxymethyl)cyclohexene ( 1 ), a divinyl ether with a cyclohexene group, was investigated with the hydrogen chloride/zinc chloride (HCl/ZnCl₂) initiating system in toluene at 0 °C. The reaction proceeded quantitatively to give soluble poly( 1 )s in organic solvents. The content of the unreacted vinyl groups in the produced polymers was less than ～3 mol%, and therefore, the degree of cyclization of the polymers was determined to be ～97%. The number‐average molecular weight (M_n) of the polymers increased in direct proportion to monomer conversion and further increased on addition of a fresh monomer feed to the almost completely polymerized reaction mixture, indicating that living cyclopolymerization of 1 occurred. The chain linking reactions among the formed living cyclopolymers with 1,4‐bis(vinyloxy)cyclohexane ( 3 ) as a crosslinker in toluene at 0 °C produced core‐crosslinked star‐shaped cyclopoly( 1 )s [star‐poly( 1 )s] in high yield (100%). Dihydroxylation of the cyclohexene double bonds of star‐poly( 1 ) gave hydrophilic water‐soluble star‐shaped polymers with rigid arm structure [star‐poly( 1 )‐OH] with thermo‐responsive function in water. T_gs of star‐poly( 1 ) and star‐poly( 1 )‐OH were 135 °C and 216 °C, respectively; these values are very high as vinyl ether‐based star‐shaped polymers. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1094–1102     

Living/controlled cationic cyclopolymerization of divinyl ether with a cyclic acetal moiety: Synthesis of poly(vinyl ether)s with high glass transition temperature based on incorporation of cyclized main chain and cyclic side chains

Cationic cyclopolymerization of 2‐methyl‐5,5‐bis(vinyloxymethyl)‐1,3‐dioxane ( 1 ), a divinyl ether with a cyclic acetal group, was investigated with the HCl/ZnCl₂ initiating system in toluene and methylene chloride at ?30 °C. The reaction proceeded quantitatively to give gel‐free, soluble polymers in organic solvents. The number‐average molecular weight (M_n) of the polymers increased in direct proportion to monomer conversion, and further increased on addition of a fresh monomer feed to the almost completely polymerized reaction mixture, indicating that the polymerization proceeded in living/controlled manner. The contents of the unreacted vinyl groups in the produced soluble polymers were less than ～3 mol %, and therefore, the degree of cyclization was determined to be ～97%. In contrast, the pendant cyclic acetal groups remained intact in the polymers under the present cationic polymerization conditions. These facts show that cyclopolymerization of 1 almost exclusively occurred and the poly(vinyl ether)s with the cyclized repeating units and cyclic pendant acetal rings were obtained. Glass transition temperature (T_g) and thermal decomposition temperature (T_d) of poly( 1 ) (M_n = 7870, M_w/M_n = 1.57) were found to be 166 and 338 °C, respectively, indicating that poly( 1 ) had high T_g and high thermal stability. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 952–958, 2010     

Effect of central spacer chain structure on cationic cyclopolymerization tendency of divinyl ethers

To clarify the effects of the central spacer chain structure of divinyl ethers on their cationic cyclopolymerization tendencies, 1,4‐bis[(2‐vinyloxy)ethoxy]benzene ( 1 ), 1,4‐bis[(2‐vinyloxy)ethoxy]butane ( 2 ), 1,6‐bis[(2‐vinyloxy)ethoxy]hexane ( 3 ), 1,8‐bis[(2‐vinyloxy)ethoxy]octane ( 4 ), and 1,4‐bis[(4‐vinyloxy)butoxy]butane ( 5 ) were polymerized with the hydrogen chloride/zinc chloride (HCl/ZnCl₂) initiating system in methylene chloride (CH₂Cl₂) at 0 °C at low initial monomer concentration ([M]₀ = 0.15 M). The polymerizations of divinyl ethers 2 and 3 gave soluble polymers quantitatively. In contrast, the polymerizations of divinyl ethers 1 , 4 , and 5 underwent gel formation at high monomer conversion. The content of the unreacted vinyl groups of the obtained soluble polymers was measured by ¹H NMR spectroscopy. Judging from the relatively low vinyl contents of the polymers produced even in the early stage of the polymerization (monomer conversion < ～20%), the cyclopolymerization occurred to some extent for 2 , 3 , and 4 . On the contrary, the polymers produced from 1 and 5 exhibited the relatively high vinyl content, indicating that the cyclopolymerization tendencies of 1 and 5 were lower than those of 2 , 3 , and 4 . These results are discussed in terms of the structural variety of the spacer chains: (1) the presence of benzene ring ( 1 vs 2 ), (2) their length ( 2 vs 3 and 4 ), and (3) the position of ether oxygen ( 4 vs 5 ). © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4002–4012, 2002     

Cationic cyclopolymerization of new divinyl ethers: The effect of ether and ester neighboring functional groups on their cyclopolymerization tendency

The cationic polymerization of two new divinyl ethers, 1‐(2‐vinyloxyethoxy)‐2‐[(2‐vinyloxyethoxy)carbonyl]benzene ( 2 ) and 1,2‐bis[(2‐vinyloxyethoxy)carbonyl]benzene ( 3 ), as well as 1,2‐bis(2‐vinyloxyethoxy)benzene ( 1 ), with BF₃OEt₂ in CH₂Cl₂ at 0 °C at low initial monomer concentrations ([M]₀ = 0.15 and 0.075 M) gave soluble polymers with relatively high molecular weights and broad molecular weight distributions (MWDs), whereas reactions with the HCl/ZnCl₂ initiating system yielded soluble polymers with relatively narrow MWDs (weight‐average molecular weight/number‐average molecular weight ? 1.6) under similar reaction conditions. An NMR structural analysis of the HCl/ZnCl₂‐mediated polymers from the divinyl ethers showed that poly( 1 ) had virtually no unreacted vinyl ether groups throughout the polymerization (monomer conversion = 28–98%), whereas poly( 2 ) and poly( 3 ) possessed some amount of unreacted vinyl ether groups in the initial stage of the polymerization; the content of the vinyl groups of poly( 2 ) was 18 mol % at a 15% monomer conversion, and the content of the vinyl groups of poly( 3 ) was 31 mol % at an 18% monomer conversion. Therefore, divinyl ether 1 underwent cyclopolymerization exclusively to give almost completely cyclized polymers [degree of cyclization (DC) ～ 100%], whereas divinyl ethers 2 and 3 exhibited a lower cyclopolymerization tendency [DC for poly( 2 ) = 82%; DC for poly( 3 ) = 69%]. The differences in the cyclopolymerization tendencies among the divinyl ethers can be explained by the differences in the solvation powers of the neighboring functional groups adjacent to the vinyl ether moiety with the active center: the ether oxygen of the ether neighboring group solvates intramolecularly with the active center to accelerate the intramolecular propagation, but such an interaction is less effective with the more electron‐deficient oxygen attached to the carbonyl group of the ester neighboring group. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 281–292, 2003     

Synthesis and characterization of soluble polyimides derived from 2′,5′‐bis(3,4‐dicarboxyphenoxy)‐p‐terphenyl dianhydride

A novel bis(ether anhydride) monomer, 2′,5′‐bis(3,4‐dicarboxyphenoxy)‐p‐terphenyl dianhydride, was synthesized from the nitro displacement of 4‐nitrophthalonitrile by the phenoxide ion of 2′,5′‐dihydroxy‐p‐terphenyl, followed by alkaline hydrolysis of the intermediate bis(ether dinitrile) and cyclodehydration of the resulting bis(ether diacid). A series of new poly(ether imide)s bearing laterally attached p‐terphenyl groups were prepared from the bis(ether anhydride) with various aromatic diamines via a conventional two‐stage process that included ring‐opening polyaddition to form the poly(amic acid)s followed by thermal or chemical imidization to the poly(ether imide)s. The inherent viscosities of the poly(amic acid) precursors were in the range of 0.62–1.26 dL/g. Most of the poly(ether imide)s obtained from both routes were soluble in polar organic solvents, such as N,N‐dimethylacetamide. All the poly(ether imide)s could afford transparent, flexible, and strong films with high tensile strengths. The glass‐transition temperatures of these poly(ether imide)s were recorded as between 214 and 276 °C by DSC. The softening temperatures of all the poly(ether imide) films stayed in the 207–265 °C range according to thermomechanical analysis. For all the polymers significant decomposition did not occur below 500 °C in nitrogen or air atmosphere. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1008–1017, 2004     

Synthesis and characterization of new highly organosoluble poly(ether imide)s based on 3,3′,5,5′‐tetramethyl‐2,2‐bis[4‐(4‐dicarboxyphenoxy)phenyl]propane dianhydride

A new bis(ether anhydride), 3,3′,5,5′‐tetramethyl‐2,2‐bis[4‐(4‐dicarboxyphenoxy)phenyl]propane dianhydride ( 3 ), was prepared in three steps: the nitro displacement of 4‐nitrophthalonitrile with 2,2‐bis(4‐hydroxy‐3,5‐dimethylphenyl)propane, the alkaline hydrolysis of the intermediate bis(ether dinitrile), and the subsequent dehydration of the resulting bis(ether diacid). A series of new highly soluble poly(ether imide)s with tetramethyl and isopropylidene groups were prepared from the bis(ether anhydride) 3 with various diamines by a conventional two‐stage synthesis including polyaddition and chemical cyclodehydration. The resulting poly(ether imide)s had inherent viscosities of 0.54–0.73 dL g^?1. Gel permeation chromatography measurements revealed that the polymers had number‐average and weight‐average molecular weights of up to 54,000 and 124,000, respectively. All the polymers showed typical amorphous diffraction patterns. All of the poly(ether imide)s showed excellent solubility and were readily dissolved in various solvents such as N‐methyl‐2‐pyrrolidinone, N,N‐dimethylacetamide, N,N‐dimethylformamide, pyridine, cyclohexanone, tetrahydrofuran, and even chloroform. Most of the polymers could be dissolved with chloroform concentrations as high as 30 wt %. These polymers had glass‐transition temperatures of 244–282 °C. Thermogravimetric analysis showed that all polymers were stable, with 10% weight losses recorded above 463 °C in nitrogen. These transparent, tough, and flexible polymer films were obtained through solution casting from N,N‐dimethylacetamide solutions. These polymer films had tensile strengths of 81–102 MPa and tensile moduli of 1.8–2.0 GPa. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2556–2563, 2002     

Living cationic polymerization of α‐methyl vinyl ethers using SnCl4

Cationic polymerization of α‐methyl vinyl ethers was examined using an IBEA‐Et_1.5AlCl_1.5/SnCl₄ initiating system in toluene in the presence of ethyl acetate at 0 ～ ?78 °C. 2‐Ethylhexyl 2‐propenyl ether (EHPE) had a higher reactivity, compared to corresponding vinyl ethers. But the resulting polymers had low molecular weights at 0 or ?50 °C. In contrast, the polymerization of EHPE at ?78 °C almost quantitatively proceeded, and the number‐average molecular weight (M_n) of the obtained polymers increased in direct proportion to the EHPE conversion with quite narrow molecular weight distributions (weight‐average molecular weight/number‐average molecular weight ≤ 1.05). In monomer‐addition experiments, the M_n of the polymers shifted higher with low polydispersity as the polymerization proceeded, indicative of living polymerization. In the polymerization of methyl 2‐propenyl ether (MPE), the living‐like propagation also occurred under the reaction conditions similar to those for EHPE, but the elimination of the pendant methoxy groups was observed. The introduction of a more stable terminal group, quenched with sodium diethyl malonate, suppressed this decomposition, and the living polymerization proceeded. The glass transition temperature of the obtained poly(MPE) was 34 °C, which is much higher than that of the corresponding poly(vinyl ether). This poly(MPE) had solubility characteristics that differed from those of poly(vinyl ethers). © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2202–2211, 2008     

Ring‐opening metathesis polymerization of amino acid‐functionalized norbornene derivatives

Amino acid‐derived novel norbornene derivatives, N,N′‐(endo‐bicyclo[2.2.1] hept‐5‐en‐2,3‐diyldicarbonyl) bis‐L ‐alanine methyl ester (NBA), N,N′‐(endo‐bicyclo[2.2.1]hept‐5‐en‐2,3‐diyldicarbonyl) bis‐L ‐leucine methyl ester (NBL), N,N′‐(endo‐bicyclo[2.2.1]hept‐5‐en‐2,3‐diyldicarbonyl) bis‐L ‐phenylalanine methyl ester (NBF) were synthesized and polymerized using the Grubbs 2nd generation ruthenium (Ru) catalyst. Although NBA, NBL, and NBF did not undergo homopolymerization, they underwent copolymerization with norbornene (NB) to give the copolymers with M_n ranging from 5200 to 38,100. The maximum incorporation ratio of the amino acid‐based unit was 9%, and the cis contents of the main chain were 54–66%. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5337–5343, 2006     

Living cationic polymerization of vinyl ether with a cyclic acetal group

The living cationic polymerization of 5‐ethyl‐2‐methyl‐5‐(vinyloxymethyl)‐1,3‐dioxane ( 1 ), a vinyl ether with a cyclic acetal unit, was investigated with various initiating systems in toluene or methylene chloride at 0 to ?30 °C. With initiating systems such as hydrogen chloride (HCl)/zinc chloride (ZnCl₂), isobutyl vinyl ether–acetic acid adduct [CH₃CH(OiBu)OCOCH₃]/tin tetrabromide (SnBr₄)/di‐tert‐butylpyridine (DTBP), and CH₃CH(OiBu)OCOCH₃/ethylaluminum sesquichloride (Et_1.5AlCl_1.5)/ethyl acetate (CH₃COOEt), the number‐average molecular weights (M_n's) of the obtained poly( 1 )s increased in direct proportion to the monomer conversion and produced polymers with relatively narrow molecular weight distributions [MWDs; weight‐average molecular weight/number‐average molecular weight (M_w/M_n) = 1.2–1.3]. To investigate the living nature of the polymerization with CH₃CH(OiBu)OCOCH₃/SnBr₄/DTBP, a second monomer feed was added to the almost polymerized reaction mixture. The added monomer was completely consumed, and the M_n values of the polymers showed a direct increase against the conversion of the added monomer, indicating the formation of a long‐lived propagating species. The glass transition temperature and thermal decomposition temperature of poly( 1 ) (e.g., M_n = 13,600, M_w/M_n = 1.30) were 29 and 308 °C, respectively. The cyclic acetal group in the pendants of the polymer of 1 could be converted to the corresponding two hydroxy groups in a 65% yield by an acid‐catalyzed hydrolysis reaction. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4855–4866, 2007     

Synthesis and characterization of new highly organosoluble poly(etherimide)s derived from 1,1‐bis{4‐[4‐(3,4‐dicarboxyphenoxy)phenyl]‐4‐phenylcyclohexane} dianhydride

A new bulky pendent bis(ether anhydride), 1,1‐bis[4‐(4‐dicarboxyphenoxy)phenyl]‐4‐phenylcyclohexane dianhydride, was prepared in three steps, starting from the nitrodisplacement of 1,1‐bis(4‐hydroxyphenyl)‐4‐phenylcyclohexane with 4‐nitrophthalonitrile to form bis(ether dinitrile), followed by alkaline hydrolysis of the bis(ether dinitrile) and subsequent dehydration of the resulting bis(ether diacid). A series of new poly(ether imide)s were prepared from the bis(ether anhydride) with various diamines by a conventional two‐stage synthesis including polyaddition and subsequent chemical cyclodehydration. The resulting poly(ether imide)s had inherent viscosities of 0.50–0.73 dL g^?1. The gel permeation chromatography measurements revealed that the polymers had number‐average and weight‐average molecular weights of up to 57,000 and 130,000, respectively. All the polymers showed typical amorphous diffraction patterns. All of the poly(ether imide)s showed excellent solubility in comparison with the other polyimides derived from adamantane, norbornane, cyclododecane, and methanohexahydroindane and were readily dissolved in various solvents such as N‐methyl‐2‐pyrrolidinone, N,N‐dimethylacetamide (DMAc), N,N‐dimethylformamide, pyridine, cyclohexanone, tetrahydrofuran, and even chloroform. These polymers had glass‐transition temperatures of 226–255 °C. Most of the polymers could be dissolved in chloroform in as high as a 30 wt % concentration. Thermogravimetric analysis showed that all polymers were stable up to 450 °C, with 10% weight losses recorded from 458 to 497 °C in nitrogen. These transparent, tough, and flexible polymer films could be obtained by solution casting from DMAc solutions. These polymer films had tensile strengths of 79–103 MPa and tensile moduli of 1.5–2.1 GPa. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2066–2074, 2002     

Hyperbranched poly(ether–urea)s using AB2‐type blocked isocyanate monomer and azide monomer: Synthesis,characterization, reactive end functionalization,and copolymerization with AB monomer

3,5‐bis(4‐aminophenoxy)phenyl phenylcarbamate—a novel AB₂‐type blocked isocyanate monomer and 3,5‐bis{ethyleneoxy(4‐aminophenoxy)}phenyl carbonyl azide—a novel AB₂‐type azide monomer were synthesized in high yield. Step‐growth polymerization of these monomers were found to give a first example of hyperbranched poly (aryl‐ether‐urea) and poly(aryl‐alkyl‐ether‐urea). Molecular weights (M_w) of the polymer were found to vary from 1,858 to 52,432 depending upon the monomer and experimental conditions used. The polydispersity indexes were relatively narrow due to the controlled regeneration of isocyanate functional groups for the polymerization reaction. The degree of branching (DB) was determined using ¹H‐NMR spectroscopy and the values ranged from 87 to 54%. All the polymers underwent two‐stage decomposition and were stable up to 300 °C. Functionalized end‐capping of poly(aryl‐ether‐urea) using phenylchloroformate and di‐t‐butyl dicarbonate (Boc)₂O changed the thermal properties and solubility of the polymers. Copolymerization of AB₂‐type blocked isocyante monomer with functionally similar AB monomer were also carried out. The molecular weights of copolymers were found to be in the order of 6 × 10⁵ with narrow dispersity. It was found that the T_g's of poly(aryl‐alkyl‐ether‐urea)s were significantly less (46–49 °C) compared to poly(aryl‐ether‐urea)s. Moreover the former showed melting transition at 154 °C, which was not observed in the latter case. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2959–2977, 2007     

Living cationic polymerization of 2‐adamantyl vinyl ether

Living cationic polymerization of 2‐adamantyl vinyl ether (2‐vinyloxytricyclo[3.3.1.1]^3,7decane; 2‐AdVE) was achieved with the CH₃CH(OiBu)OCOCH₃/ethylaluminum sesquichloride/ethyl acetate [CH₃CH(OiBu)OCOCH₃/Et_1.5AlCl_1.5/CH₃COOEt] initiating system in toluene at 0 °C. The number‐average molecular weights (M_n's) of the obtained poly(2‐AdVE)s increased in direct proportion to monomer conversion and produced the polymers with narrow molecular weight distributions (MWDs) (M_w/M_n = ～1.1). When a second monomer feed was added to the almost polymerized reaction mixture, the added monomer was completely consumed and the M_n's of the polymers showed a direct increase against conversion of the added monomer. Block and statistical copolymerization of 2‐AdVE with n‐butyl vinyl ether (CH₂?CH? O? CH₂ CH₂CH₂CH₃; NBVE) were possible via living process based on the same initiating system to give the corresponding copolymers with narrow MWDs. Grass transition temperature (T_g) and thermal decomposition temperature (T_d) of the poly(2‐AdVE) (e.g., M_n = 22,000, M_w/M_n = 1.17) were 178 and 323 °C, respectively. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1629–1637, 2008     

Synthesis of laterally attached side‐chain liquid‐crystalline polynorbornenes with high mesogen density by ring‐opening metathesis polymerization

(±)‐exo,endo‐5,6‐Bis{[[11′‐[2″,5″‐bis[2‐(3′‐fluoro‐4′‐n‐alkoxyphenyl)ethynyl]phenyl]undecyl]oxy]carbonyl}bicyclo[2.2.1]hept‐2‐ene (n = 1–12) monomers were polymerized by ring‐opening metathesis polymerization in tetrahydrofuran at room temperature with Mo(CHCMe₂Ph)(N‐2,6‐ⁱPr₂Ph)(O^tBu)₂ as the initiator to produce polymers with number‐average degrees of polymerization of 8–37 and relatively narrow polydispersities (polydispersity index = 1.08–1.31). The thermotropic behavior of these materials was independent of the molecular weight and therefore representative of that of a polymer at approximately 15 repeat units. The polymers exhibited an enantiotropic nematic mesophase when n was 2 or greater. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4076–4087, 2006     

Gel formation in cationic polymerization of divinyl ethers. III. Effect of oligooxyethylene chain versus oligomethylene chain as central spacer units

Cationic polymerizations of two series of divinyl ethers were carried out to clarify the effects of their central spacer chain structure on their crosslinking polymerization behavior. One series of the monomers involves divinyl ethers with an oligooxyethylene central spacer chain: diethylene glycol divinyl ether ( O‐3 ), triethylene glycol divinyl ether ( O‐4 ), tetraethylene glycol divinyl ether ( O‐5 ), pentaethylene glycol divinyl ether ( O‐6 ), and heptaethylene glycol divinyl ether ( O‐8 ) (see Scheme 1 ). The other series includes divinyl ethers with an oligomethylene central spacer chain: 1,4‐butanediol divinyl ether ( C‐4 ), 1,6‐hexanediol divinyl ether ( C‐6 ), and 1,8‐octanediol divinyl ether ( C‐8 ). Cationic polymerizations of these monomers were carried out with the hydrogen chloride/zinc chloride (HCl/ZnCl₂) initiating system in methylene chloride (CH₂Cl₂) at ?30 °C ([Monomer]₀ = 0.15 M; [HCl]₀ = 5.0 mM; [ZnCl₂]₀ = 0.5 mM). The polymerizations of the oligomethylene‐based divinyl ethers C‐6 and C‐8 caused gel formation at high monomer conversions (～90%), whereas C‐4 formed soluble polymers even at almost 100% monomer conversion. The oligooxyethylene‐based divinyl ethers O‐3 , O‐4 , O‐5 , and O‐6 underwent gel‐free polymerizations up to 100% monomer conversion and O‐8 did so at least up to ～80% conversion. The content of unreacted pendant vinyl groups of the obtained soluble polymers was measured by ¹H NMR spectroscopy. In the polymerizations of the oligomethylene‐based divinyl ethers ( C‐4 , C‐6 , and C‐8 ), the vinyl contents of the polymers decreased monotonously with increasing monomer conversion, and their number‐average molecular weights (M_n's) and polydispersity ratios (M_w/M_n's) increased considerably just before the gelation occurred. On the contrary, the vinyl contents of the polymers obtained from the oligooxyethylene‐based divinyl ethers ( O‐3 , O‐4 , O‐5 , O‐6 , and O‐8 ) decreased steeply even in the early stage of the polymerizations and almost all the pendant vinyl ether groups were consumed in the soluble polymers at the final stage of the polymerizations. The oligooxyethylene spacer units adjacent to the pendant unreacted vinyl ether groups may solvate intramolecularly with the carbocationic active center to accelerate frequent occurrence of intramolecular crosslinking reactions. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3729–3738, 2004     

Ring‐opening metathesis polymerization of new norbornene‐based monomers containing various chromophores

Pure exo‐functional norbornene monomers containing various chromophores such as fluorene, pyrene, and carbazole were successfully prepared via the Diels–Alder reaction and condensation reaction. The living ring‐opening metathesis polymerization (ROMP) of a fluorene‐containing monomer, exo‐2‐(fluorene‐9‐ylcarboxymethyl)norborn‐5‐ene (exo‐1), was observed and confirmed by the formation of a diblock copolymer and a linear relationship between the number‐average molecular weight and [M]/[I] ratios ([M] = monomer concentration; [I] = initiator concentration). The synthesis and characteristics of novel fluorene‐containing polymers based on pure exo‐1 are reported with Grubbs catalyst I {RuCl₂(CHPh)[P(C₆H₁₁)₃]₂} with a high molecular weight of 3.18 × 10⁴ in 90 s ([M]/[I] = 100). However, the ROMP of pyrene‐ and carbazole‐containing monomers [exo‐5‐(pyrene methoxy carbonyl)bicyclo[2.2.1]hept‐2‐ene and exo‐5‐(carbazole ethoxy carbonyl)bicyclo[2.2.1]hept‐2‐ene, respectively] were carried out in a nonliving fashion. All the chromophore‐containing polymers showed excellent solubility in various organic solvents, particularly in chloroform, N‐methyl‐2‐pyrrolidinone, and 1,2‐dichlorobenzene. The glass transition temperatures of polynorbornenes containing various chromophores were determined to be 80–109 °C (by differential scanning calorimetry) higher than that of ring‐opened polynorbornene (glass transition temperature = 35 °C), indicating that the incorporation of the pendant aromatic moieties (e.g., fluorene, pyrene, and carbazole) could enhance the transition temperature for segmental motions of polymer chains. The photoluminescence spectra of all polymer solutions showed a strong emission in the blue region of the visible spectra. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3022–3031, 2007     

Synthesis and characterization of poly(arylene ether)s containing 6‐(4‐hydroxyphenyl)pyridazin‐3(2H)‐one or 6‐(4‐hydroxyphenyl)pyridazine moieties

A series of novel soluble pyridazinone‐ or pyridazine‐containing poly(arylene ether)s were prepared by a polycondensation reaction. The pyridazinone monomer, 6‐(4‐hydroxyphenyl)pyridazin‐3(2H)‐one ( 1 ), was synthesized from the corresponding acetophenone and glyoxylic acid in a simple one‐pot reaction. The pyridazinone monomer was successfully copolymerized with bisphenol A (BPA) or 1,2‐dihydro‐4‐(4‐hydroxyphenyl)phthalazin‐1(2H)‐one (DHPZ) and bis(4‐fluorophenyl)sulfone to form high‐molecular‐weight polymers. The copolymers had inherent viscosities of 0.5–0.9 dL/g. The glass‐transition temperatures (T_g's) of the copolymers synthesized with BPA increased with increasing content of the pyridazinone monomer. The T_g's of the copolymers synthesized from DHPZ with different pyridazinone contents were similar to those of the two homopolymers. The homopolymers showed T_g's from 202 to 291 °C by differential scanning calorimetry. The 5% weight loss temperatures in nitrogen measured by thermogravimetric analysis were in the range of 411–500 °C. 4‐(6‐Chloropyridazin‐3‐yl)phenol ( 2 ) was synthesized from 1 via a simple one‐pot reaction. 2 was copolymerized with 4,4′‐isopropylidenediphenol and bis(4‐fluorophenyl)sulfone to form high‐T_g polymers. The copolymers with less than 80 mol % pyridazinone or chloropyridazine monomers were soluble in chlorinated solvents such as chloroform. The copolymers with higher pyridazinone contents and homopolymers were not soluble in chlorinated solvents but were still soluble in dipolar aprotic solvents such as N‐methylpyrrolidinone. The soluble polymers could be cast into flexible films from solution. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3328–3335, 2006     

Novel doubly polymerizable functional norbornene: Its synthesis,reactivity, and macromolecular architectures from a dual cure via ring‐opening metathesis polymerization and radical photopolymerization

A novel doubly polymerizable functional norbornene, 5‐(methacryloyloxyethylamino carboxylmethyl)bicyclo[2.2.1]hept‐2‐ene (NBMOACM), was prepared. The ring‐opening metathesis polymerization (ROMP) of NBMOACM was carried out to prepare polymers with crosslinkable side chains with the Grubbs catalyst. No gel formation occurred during the ROMP of NBMOACM. The ¹H NMR spectrum of poly(NBMOACM) showed broad signals between 5.10 and 5.40 ppm, corresponding to the vinyl protons of the cis and trans double bonds of the ring‐opened polymer. Increasing the ratio of the monomer concentration to the catalyst concentration resulted in the formation of higher molecular weight polymers. Poly(NBMOACM) was incorporated into poly(methyl methacrylate) [poly(MMA)] to produce AB crosslinked materials. These crosslinked materials [1 wt % poly(NBMOACM), 10% weight loss temperature = 300 °C in air] had higher thermal stability than pure poly(MMA) (10% weight loss temperature = 276 °C in air). © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6287–6298, 2006     

Novel Flame‐Retardant and Thermally Stable Poly(Amide‐imide)s Based on Bicyclo[2,2,2]oct‐7‐Ene‐2,3,5,6‐Tetracarboxylic Diimide and Phosphine Oxide in the Main Chain: Synthesis and Characterization

Six novel poly(amide‐imide)s PAIs 5a‐f were synthesized through the direct polycondensation reaction of six chiral N,N′‐(bicyclo[2,2,2]oct‐7‐ene‐tetracarboxylic)‐bis‐L‐amino acids 3a‐f with bis(3‐amino phenyl) phenyl phosphine oxide 4 in a medium consisting of N‐methyl‐2‐pyrrolidone (NMP), triphenyl phosphite (TPP), calcium chloride (CaCl₂) and pyridine. The polymerization reaction produced a series of flame‐retardant and thermally stable poly(amide‐imide)s 5a‐f with high yield and good inherent viscosity of 0.39–0.83 dLg^?1. The resultant polymers were fully characterized by means of FTIR, ¹H NMR spectroscopy, elemental analyses, inherent viscosity, specific rotation and solubility tests. Thermal properties and flame retardant behavior of the PAIs 5a‐f were investigated using thermal gravimetric analysis (TGA and DTG) and limited oxygen index (LOI). Data obtained by thermal analysis (TGA and DTG) revealed that these polymers show good thermal stability. Furthermore, high char yields in TGA and good LOI values indicated that resultant polymers exhibited good flame retardant properties. N,N′‐(bicyclo[2,2,2]oct‐7‐ene‐tetracarboxylic)‐bis‐L‐amino acids 3a‐f were prepared in quantitative yields by the condensation reaction of bicyclo[2,2,2]oct‐7‐ene‐2,3,5,6‐tetracarboxylic dianhydride 1 with L‐alanine 2a , L‐valine 2b , L‐leucine 2c , L‐isoleucine 2d , L‐phenyl alanine 2e and L‐2‐aminobutyric acid 2f in acetic acid solution. These polymers can be potentially utilized in flame retardant thermoplastic materials.     

Synthesis and Rh(I)‐catalyzed polymerization of 1,3‐diphenylyne–calix[4]arene compounds: Novel conjugated,calixarene‐based polymers

The synthesis of two 1,3‐bis(4‐ethynylbenzyloxy)calix[4]arenes, 5,11,17,23‐tetrakis(1,1‐dimethylethyl)‐25,27‐bis(4‐ethynylbenzyloxy)‐26,28‐dihydroxycalix[4]arene ( 1 ) and 25,27‐bis(4‐ethynylbenzyloxy)‐26,28‐dihydroxycalix[4]arene ( 2 ), was accomplished through Sonogashira coupling of appropriate calixarene derivatives. Methods for the polymerization of these bifunctional building blocks with Rh(I) as a catalyst, leading ultimately to conjugated polymers having calix[4]arene units incorporated into the main chain, were explored. Calixarenes 1 and 2 were efficiently polymerized with rhodium‐based initiators and afforded the conjugated polymers poly{5,11,17,23‐tetrakis(1,1‐dimethylethyl)‐25,27‐bis(4‐ethynylbenzyloxy)‐26,28‐dihydroxycalix[4]arene} ( poly 1 ) and poly{25,27‐bis(4‐ethynylbenzyloxy)‐26,28‐dihydroxycalix[4]arene}. Depending on the conditions, high conversions and good yields were obtained. The effects of adding cocatalysts (NHEt₂ and/or PPh₃) were studied in connection with the number‐average molecular weight and the molecular weight distribution of the resultant polymer ( poly 1 ) and tentatively correlated with the formation of low‐molecular‐weight materials. A catalytic system containing triphenylphosphine as the sole additive ([Rh(nbd)Cl]₂; [Rh]/[PPh₃] = 0.5) proved to be the best for the polymerization of p‐tert‐butylcalixarene compound 1 . Linear polymers having high number‐average molecular weights (up to 1.1 × 10⁵ g mol^?1) with low polydispersities were produced under these conditions. For debutylated homologue 2 , its polymerization was best carried out in the absence of any added cocatalyst. A cyclopolymerization route, comprising the intramolecular ring closing of the calix[4]arene pendant ethynyl groups followed by an intermolecular propagation step, is advanced to explain the results. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 7054–7070, 2006     

pH and ionic strength responsive polyelectrolyte block copolymer micelles prepared by ring opening metathesis polymerization

Well‐defined amphiphilic block copolymers were prepared by ring opening metathesis polymerization and their stimuli responsive behavior of formed micelles in aqueous solution was investigated. The hydrophobic core of the micelles consists of either a poly[5,6‐bis(ethoxymethyl)bicyclo[2.2.1]hept‐2‐ene]‐block with a glass transition T_g at room temperature or a poly[endo,exo[2.2.1]bicyclohept‐5‐ene‐2,3‐diylbis (phenylmethanone)] with a T_g of 143 °C. For the polyelectrolyte shell, the precursor block poly[endo,exo[2.2.1]bicyclohept‐5‐ene‐2,3‐dicarboxyclic tert‐butylester] was transformed into the free acidic block by cleavage of the tert‐butyl groups using trifluoroacetic acid. Micellar solutions were prepared by dialysis, dissolving the copolymers in dimethyl sulfoxide which was subsequently replaced by water. All polymers form micelles with radii between 10 and 20 nm at a pH‐value below 5, where the carboxylic acid groups are in the protonated state. The block copolymer micelles show a strong increase of the hydrodynamic radius with increasing pH‐value, due to the repulsion among the formed carboxylate anions resulting in a stretching of the polymer chains. In this state, the micelles exhibit responsive behavior to ionic strength where a contraction of the micelles is observed as the carboxylate charges are balanced by sodium ions, whereas no changes of the hydrodynamic radius on addition of salt are observed at low pH. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1178–1191, 2009