NUMERICAL MODELLING OF MEDIAN ROAD TRAFFIC NOISE BARRIERS

Outdoor sound propagation from road traffic is modelled by solving a boundary integral equation formulation of the wave equation using boundary element techniques in two dimensions. In the first model, the source representing a traffic stream can be considered as a coherent line source of sound. The results can then be transformed to derive a pseudo-three dimensional solution to the problem. In the second model the line source is incoherent. For receivers near the ground, the second model predicted significantly higher values of ground attenuation than the first. The first model generally produced better agreement with ground attenuation results obtained using the U.K. traffic noise prediction model. For conditions when a noise barrier was present and the ground was absorbent, the incoherent line source model generally predicted significantly higher values of attenuation than those from the barrier and ground attenuation calculated separately. Over a range of receiver positions and barrier heights a similar, but less marked effect was observed when the coherent line source model was used. On dual carriageway roads, it is possible to incorporate barriers on the central reservation as a noise control measure. These are “median” noise barriers. The incoherent line source model is used to assess the performance of median barriers in reducing noise when installed alone and also with associated roadside barriers. A sound absorbent median noise barrier 1m in height produced consistent values of insertion loss of between 1 and 2dB over the range of receiver positions and ground conditions considered. When the median barrier was used in conjunction with a roadside barrier it produced a consistent improvement in insertion loss of between 1 and 2 dB over the range of conditions considered.     

Experiments on the validity of ground effect predictions for static noise testing of propeller aircraft

The practical importance of an advanced ground effect theory for the prediction of free field noise spectra from static field measurements above grassland is investigated. Empirical noise data from a ground-based light propeller aircraft are compared with predictions. The results show that short range propagation of low frequency noise is adequately described by theory. It is also shown, however, that at intermediate and high frequencies detailed experiments on ground interference effects remain required to determine the characteristics of the noise source.     

Sound propagation through vegetation

The propagation of sound through a large number of scatterers (i.e., trees) is treated in a similar way to a classical diffusion problem. A general differential equation governing the sound intensity is derived which is valid under certain conditions, notably that the depth of the belt of vegetation is large, and absorption small. The predictions of this theory are compared with results derived from a small scale model study, and with some field measurements. They are also compared with published field data. The implications of some of the conclusions reached for the practical achievement of effective sound attenuation are pointed out. In general, it would appear that significant noise reductions may be achieved for a predominantly high frequency source if the existing ground cover is acoustically hard, or if there is no “ground effect” attenuation between source and receiver for some other reason. In other cases, the noise reduction will be much lower and may be negative.     

Determination of acoustic attenuation in the Hudson River Estuary by means of ship noise observations

Analysis of sound propagation in a complex urban estuary has application to underwater threat detection systems, underwater communication, and acoustic tomography. One of the most important acoustic parameters, sound attenuation, was analyzed in the Hudson River near Manhattan using measurements of acoustic noise generated by passing ships and recorded by a fixed hydrophone. Analysis of the ship noise level for varying distances allowed estimation of the sound attenuation in the frequency band of 10-80 kHz. The effective attenuation coefficient representing the attenuation loss above cylindrical spreading loss had only slight frequency dependence and can be estimated by the frequency independent value of 0.058 dBm.     

Comparative Study of the Propagation of Jet Noise in Static and Flow Environments

In order to analyze the effect of the background flow on the sound prediction of fine-scale turbulence noise, the sound spectra from static and flow environments are compared. It turns out that, the two methods can obtain similar predictions not only at 90 deg to the jet axis but also at mid- and high frequencies in other directions. The discrepancies of predictions from the two environments show that the effect of the jet flow on the sound propagation is related to low frequencies in the downstream and upstream directions. It is noted that there is an obvious advantage of computational efficiency for calculating in static environment, compared with that in flow environment. A good agreement is also observed to some extent between the predictions in static environment and measurements of subsonic to supersonic. It is believed that the predictions in static environment could be an effective method to study the propagation of the sound in jet flow and to predict the fine scale turbulence noise accurately in a way as well.     

Wave propagation in a duct with a periodic Helmholtz resonators array

Helmholtz resonator is often used to reduce noise in a narrow frequency range. To obtain a broader noise attenuation band, combing several resonators is a possible way. This paper presents a theoretical study of sound propagation in a one-dimensional duct with identical side-branch resonators mounted periodically. The analysis of each resonator was based on a distributed-parameter model that considered multi-dimensional wave propagation in its neck-cavity interface. This model provided a more accurate prediction of the resonant frequency of the resonator than traditional lumped-parameter model. Bloch wave theory and the transfer matrix method were used to investigate wave propagation in these spatially periodic resonators. The results predicted by the theory fit well with the computer simulation using a three-dimensional finite element method and the experimental results. This study indicates that the wave coupling in this periodic system results in the dispersion of the frequency band into the stop and the pass bands. The long-term significance is that periodic resonators may more effectively control noise in ducts by broadening the bandwidth they attenuate and increasing the magnitude of sound attenuation.     

Proper orthogonal decomposition and cluster weighted modeling for sensitivity analysis of sound propagation in the atmospheric surface layer

Outdoor sound propagation predictions are compromised by uncertainty and error in the atmosphere and terrain representations, and sometimes also by simplified or incorrect physics. A model's predictive power, i.e., its accurate representation of the sound propagation, cannot be assessed without first quantifying the ensemble sound pressure variability and sensitivity to uncertainties in the model's governing parameters. This paper describes fundamental steps toward this goal for a single-frequency point source. The atmospheric surface layer is represented through Monin-Obukhov similarity theory and the acoustic ground properties with a relaxation model. Sound propagation is predicted with the parabolic equation method. Governing parameters are modeled as independent random variables across physically reasonable ranges. Latin hypercube sampling and proper orthogonal decomposition (POD) are employed in conjunction with cluster-weighted models to develop compact representations of the sound pressure random field. Full-field sensitivity of the sound pressure field is computed via the sensitivities of the POD mode coefficients to the system parameters. Ensemble statistics of the full-field sensitivities are computed to illustrate their relative importance at every down range location. The central role of sensitivity analysis in uncertainty quantification of outdoor sound propagation is discussed and pitfalls of sampling-based sensitivity analysis for outdoor sound propagation are described.     

Hearing sensitivity and critical ratios of hooded crows (Corvus corone cornix)

The hearing threshold and critical ratios were estimated psycho-acoustically for captive wild-caught hooded crows by a yes/no procedure and the method of constant stimuli. Human subjects were tested in the same setup for direct comparison and to check for experimental artifacts. The hooded crows were found to have excellent low-frequency hearing capabilities compared to other passerine birds. Their hearing sensitivity is very close to that of humans at and below 5.6 kHz. The distribution of the critical ratios differed from that of the average bird and humans in being rather constant with frequency and not increasing monotonically. It furthermore showed a middle region of 5-6 dB lower critical ratio values between 500 Hz and 2 kHz. It is suggested that this improved range for hearing in noise is an adaptation to long distance communication. Human critical ratios gave the expected values and were between 3 and 6 dB lower than those of the crows.     

Sound attenuation of a periodic array of micro-perforated tube mufflers

The wave propagation in a periodic array of micro-perforated tube mufflers is investigated theoretically, numerically and experimentally. Because of the high acoustic resistance and low mass reactance due to the sub-millimeter perforation, the micro-perforated muffler can provide considerable sound attenuation of duct noise. Multiple mufflers are often used to enhance attenuation performance. When mufflers are distributed periodically in a duct, the periodic structure produces special dispersion characteristics in the overall sound transmission loss. The Bloch wave theory and the transfer matrix method are used to study the wave propagation in periodic micro-perforated tube mufflers and the dispersion characteristics of periodic micro-perforated mufflers are examined. The results predicted by the theory are compared with finite element method simulation and experimental results. The results indicate that the periodic structure can influence the performance of micro-perforated mufflers. With different periodic distances, the combination of the periodic structure and the micro-perforated tube muffler can contribute to the control of lower frequency noise with a broader frequency range or improvement of the peak transmission loss around the resonant frequency.     

Reliability of sound attenuation in Florida scrub habitat and behavioral implications

Attenuation over distance in natural habitat is often difficult to predict when measured without respect to sound frequency. The physical-acoustic structure of Florida scrub habitat is described and both attenuation and reliability of attenuation are measured as a function of sound frequency, over several distances, speaker elevations, and microphone elevations. The spatial context of sound propagation in Florida scrub habitat is discussed and a model designed to describe contributions to overall attenuation from individual factors is presented. Sound frequencies below approximately 3.5 kHz attenuate more reliably than higher sound frequencies, suggesting that animals should pay greatest attention to relatively low sound frequencies when they assess attenuation or estimate sound-pressure level.     

Using impedance measurements to detect and quantify the effect of air leaks on the attenuation of earplugs

The impedance of a simple artificial ear occluded with an earplug and bypassed with narrow air leaks was measured along with the attenuation of sound through the air leaks. A lumped element model is suggested for the simple occluded artificial ear with an air leak. The suggested model was adapted to the impedance measurements and the attenuation was predicted from the model. The attenuation predictions were compared to the attenuation measurements and were found to be within [-3.5,+3] dB of the measured attenuation over the frequency range of 50-1000 Hz and an attenuation range of -2-38 dB. The average difference between the measured and predicted attenuation for four different leaks in the frequency range of 50-1000 Hz was -0.7 dB, indicating a very slight underestimation of the attenuation.     

Attenuation of a resonant dissipative silencer in a rigid duct

Sound attenuation characteristics of a resonant-type dissipative silencer consisting of a reactive chamber with a porous facing have been considered. Such a silencer provides a high degree of attenuation within a narrow frequency range. Predicted attenuation values are compared with experiment for plane waves propagating in a rigid duct containing the dissipative silencer. The sound field is described by one-dimensional acoustical expressions taking into account the effect of boundary conditions and the presence of the silencer. The theoretical model incorporates the acoustical properties of porous materials and inertance of the sound field in the duct adjacent to the silencer. Good agreement was achieved between theoretical predictions and actual measurements. Results presented indicate the dependence of the attenuation spectrum upon flow resistivity and thickness of the porous material.     

Localization and source level estimates of black drum (Pogonias cromis) calls

A four hydrophone linear array was used to localize calling black drum and estimate source levels and signal propagation. A total of 1025 source level estimates averaged 165 dB(RMS) relative (re:) 1 μPa (standard deviation (SD)=1.0). The authors suggest that the diverticulated morphology of the black drum swimbladder increase the bladder's surface area, thus contributing to sound amplitude. Call energy was greatest in the fundamental frequency (94 Hz) followed by the second (188 Hz) and third harmonics (282 Hz). A square root model best described propagation of the entire call, and separately the fundamental frequency and second harmonic. A logarithmic model best described propagation of the third harmonic which was the only component to satisfy the cut-off frequency equation. Peak auditory sensitivity was 300 Hz at a 94 dB re: 1 μPa threshold based on auditory evoked potential measurements of a single black drum. Based on mean RMS source level, signal propagation, background levels, and hearing sensitivity, the communication range of black drum was estimated at 33-108 m and was limited by background levels not auditory sensitivity. This estimate assumed the source and receiver were at approximately 0.5 m above the bottom. Consecutive calls of an individual fish localized over 59 min demonstrated a mean calling period of 3.6 s (SD=0.48), mean swimming speed of 0.5 body lengths/s, and a total distance swam of 1035 m.     

Sound propagation in forests: A comparison of experimental results and values predicted by the Nord 2000 model

The purpose of the work described in this paper is twofold: (i) to present the results of an experimental investigation of the sound attenuation in different types of forest, and (ii) to validate a part of the Nord 2000 model. A number of measurements have been carried out in regular and irregular forests with trees with deciduous and evergreen leaves, different tree density, different trunk diameter, etc. The experimental results indicate that trees have a noticeable effect on sound propagation at medium and high frequencies at distances longer than 40 m. The Nord 2000 model uses a simple algorithm to predict scattering effects when sound propagates in outdoor spaces with obstacles. The comparison of experimental results and predictions shows that the Nord 2000 model predicts the ground effect dip in forests with acceptable accuracy in about 60% of the cases if the flow resistivity of the ground is allowed to vary with distance. The high frequency effect of trees is in general not predicted very well.     

Use of the sound levels of noise for assessing the adequacy of hearing protectors

The dB(A) sound level of a noise is accepted as a measure of the damage risk to unprotected ears but often it is not a reliable guide to the risk to ears fitted with hearing protectors. For any dB(A) level inside a protector, normally there will be substantially higher sound levels outside that protector. This paper shows how, from sequential frequency attenuation bands of the protector, and sound level weightings, external sound levels can be calculated, below which the noise inside the protector does not exceed a chosen dB(A) level. Further valuable information may be obtained by mapping external dB(A) and dB(C) levels to cover all possible noise spectra that give the chosen dB(A) level inside the protector. Thus, from a pair of measured sound levels, use of the method indicates whether the protector is sufficient or not, or whether more detailed measurment of the noise is required. This knowledge enhances the scope of the sound level meter and reduces the need for frequency analysis of industrial noise. Its application should be a helpful addition to the data provided by suppliers of hearing protectors.     

The effects of speech intelligibility and temporal–spectral variability on performance and annoyance ratings

Ambient sound can impair verbal short-term memory performance. This finding is relevant to the acoustic optimization of open-plan offices. Two algorithmic approaches claim to model the impairment during a given sound condition. One model is based on the Speech Transmission Index (STI). The other approach relies on the hearing sensation fluctuation strength (F). Within the scope of our consulting activities the approach based on F can hardly be applied and the model based on the STI is often misinterpreted in terms of semanticity. Therefore we put to test the two models and elucidate the relevance of temporal–spectral variability and semanticity of background sound with regard to impairment of performance. A group of 24 subjects performed a short-term memory task and rated perceived annoyance during eight different speech and speech-like noise conditions, which varied with regard to STI and F. The empirical data is compared to the model predictions, which only partly cover the experimental results. Speech impairs performance more than all other sound conditions and variable speech-like noise is more impairing than continuous speech-like noise. Sound masking with continuous speech-like noise provides relief from the negative effect of background speech. This positive effect is more pronounced if the signal to noise ratio is −3 dB(A) or even lower.     

Localization of virtual sound sources with bilateral hearing aids in realistic acoustical scenes

Sound localization with hearing aids has traditionally been investigated in artificial laboratory settings. These settings are not representative of environments in which hearing aids are used. With individual Head-Related Transfer Functions (HRTFs) and room simulations, realistic environments can be reproduced and the performance of hearing aid algorithms can be evaluated. In this study, four different environments with background noise have been implemented in which listeners had to localize different sound sources. The HRTFs were measured inside the ear canals of the test subjects and by the microphones of Behind-The-Ear (BTEs) hearing aids. In the first experiment the system for virtual acoustics was evaluated by comparing perceptual sound localization results for the four scenes in a real room with a simulated one. In the second experiment, sound localization with three BTE algorithms, an omnidirectional microphone, a monaural cardioid-shaped beamformer and a monaural noise canceler, was examined. The results showed that the system for generating virtual environments is a reliable tool to evaluate sound localization with hearing aids. With BTE hearing aids localization performance decreased and the number of front-back confusions was at chance level. The beamformer, due to its directivity characteristics, allowed the listener to resolve the front-back ambiguity.     

Analysis of noise barrier overlap gaps

Sound propagation through the gap produced by two parallel vertical barriers with overlapped ends is formulated for traffic noise sources. The analysis identifies both source and receiver regions according to the mechanisms that influence noise propagation in the vicinity of an overlap gap. A method to account for the contributions from the various source regions for a given receiver location is described. The derived method can be implemented using various equations for sound propagation. The results of using equations approved by the United States Federal Highway Administration for traffic noise propagation are given. Uncalibrated predictions are compared with field measurements for up to 30 receiver positions from each of four overlap gaps. The relative importance of contributions from reflected rays to the noise levels at receiver positions is given. The analysis confirms the initial hypothesis that a commonly used strategy of overlapping barriers by an amount equal to two or three times the overlap width is useful for controlling line-of-sight propagation but ignores the substantial effect of reflections.     

发动机圆形管道内噪声衰减谱模态分析

本文应用模态分析方法建立了剪切流存在条件下,发动机多段声衬圆形管道声传播工程计算模型,对管内各模态频谱和总噪声衰减频谱进行了算例计算,并与有关文献试验数据进行了对比。结果表明,多段声衬圆形管道中声传播工程计算方法是可行的,从而为发动机前短舱管内声传播研究提供了一种模态分析工程预测方法。