NUMERICAL MODELLING OF MEDIAN ROAD TRAFFIC NOISE BARRIERS

Outdoor sound propagation from road traffic is modelled by solving a boundary integral equation formulation of the wave equation using boundary element techniques in two dimensions. In the first model, the source representing a traffic stream can be considered as a coherent line source of sound. The results can then be transformed to derive a pseudo-three dimensional solution to the problem. In the second model the line source is incoherent. For receivers near the ground, the second model predicted significantly higher values of ground attenuation than the first. The first model generally produced better agreement with ground attenuation results obtained using the U.K. traffic noise prediction model. For conditions when a noise barrier was present and the ground was absorbent, the incoherent line source model generally predicted significantly higher values of attenuation than those from the barrier and ground attenuation calculated separately. Over a range of receiver positions and barrier heights a similar, but less marked effect was observed when the coherent line source model was used. On dual carriageway roads, it is possible to incorporate barriers on the central reservation as a noise control measure. These are “median” noise barriers. The incoherent line source model is used to assess the performance of median barriers in reducing noise when installed alone and also with associated roadside barriers. A sound absorbent median noise barrier 1m in height produced consistent values of insertion loss of between 1 and 2dB over the range of receiver positions and ground conditions considered. When the median barrier was used in conjunction with a roadside barrier it produced a consistent improvement in insertion loss of between 1 and 2 dB over the range of conditions considered.