聚苯胺粒子悬浮液的电流变特性

将聚苯胺作为分散粒子，电绝缘油 分散介质组成电流变流体，研究了电场强度，温度等因素与ＥＲＦ的静态屈服应力和电流密度的关系。结果表明：τｓ和ｉ随电场强度的变化皆成指数关系。     

微孔发泡聚合物基导电复合材料的研究进展

概述了用超临界流体作为物理发泡剂对聚合物基导电复合材料进行微孔发泡的基本原理,总结了聚合物基导电复合材料及其微发泡复合材料的几种导电机理,简要介绍了近年来微孔发泡聚合物基导电复合材料电学性能的研究现状。并从微发泡聚合物基导电复合材料的基体特性、所使用的导电填料类型、导电填料的含量、填料在基体中的分散方法及微发泡复合材料的泡孔形态等几个方面,分析了影响微孔发泡聚合物基导电复合材料电学性能的主要因素,并展望了新型微孔发泡聚合物基导电复合材料的研究和发展趋势。     

多壁碳纳米管/溴/聚苯乙炔三元复合材料导电性能的研究

通过机械共混和溶液共混制备了多壁碳纳米管(MWNTs)/溴/聚苯乙炔(PPA)三元复合材料, 复合材料表现出良好的导电性能, 电导率为10 S/m, 达到掺溴MWNTs的导电水平. 通过固体紫外光谱、XPS和SEM分析了复合材料中MWNTs、溴与PPA三者之间的相互作用, 研究了独立导电单元的形成, 以及导电单元对电导率提高所起的作用. 结果表明, 当MWNTs含量较低时, MWNTs和PPA之间的溴转移导致复合材料电导率降低; MWNTs含量较高时, 独立导电单元的数目增多, 复合材料的电导率随之大幅提高.     

多壁碳纳米管/溴/聚苯乙炔三元共混物导电性能的研究

通过机械共混和溶液共混制备了多壁碳纳米管(MWNTs)/溴/聚苯乙炔(PPA)三元复合材料,复合材料表现出良好的导电性能,电导率为10S/m,达到掺溴MWNTs的导电水平.通过固体紫外光谱、XPS和SEM分析了复合材料中MWNTs、溴与PPA三者之间的相互作用,研究了独立导电单元的形成,以及导电单元对电导率提高所起的作用.结果表明,当MWNTs含量较低时,MWNTs和PPA之间的溴转移导致复合材料电导率降低;MWNTs含量较高时,独立导电单元的数目增多,复合材料的电导率随之大幅提高.     

梳状高分子固体电解质的离子导电性研究

深入研究了交替马来酸酐共聚物多缩乙二醇酯（ＣＰ３５０）两种锂盐络合物ＣＰ３５０／ＬｉＡｓＦ＿６和ＣＰ３５０／ＬｉＰＦ＿６的离子传导性能,给出了与复阻抗谱相对应的等效电路．离子电导率随［Ｌｉ］／［ＥＯ］的变化而出现一极大值,室温下,两体系电导率极大值分别为１．３８×１０（－４）,８．３２×１０（－５）Ｓ／ｃｍ．电导率随温度升高而增加．导电行为呈非－Ａｒｒｈｅｎｉｕｓ特征．阴阳离子半径之和（ｒ＿ｃ＋ｒ＿ａ）愈大,离子电导率愈高．     

由聚苯胺粒子组成的电流变液的研究

由经碱处理的掺杂态聚苯胺（ＰＡｎ）制得高介电常数的半导体ＰＡｎ粒子，将其悬浮于电绝缘油可组成电流变液，讨论了电流变（ＥＲ）液的静态屈服应力（τ＿ｓ），电流密度等性能与ＰＡｎ的介电常数（ε＿ｐ），导电率（σ），体积分数和应用电场强度的关系。对导电率相同的ＰＡｎ粒子，用氨水处理的ＰＡｎ粒子ε＿ｐ较用ＮａＯＨ液处理的高，前者在σ足够低如σ≤１．０×１０￣（－７）／ｃｍ时，ＥＲ液的τ＿ｓ随偶极系数的平方（β￣２）的增大而呈现非线性增加；后者ＥＲ液的τ＿ｓ随β￣２的增大出现一最大值．结果表明：由聚苯胺粒子可组成高电流变活性的无水ＥＲ液．     

聚苯胺电极的电导率

采用化学氧化聚合法制备聚苯胺(PANI)。利用四探针技术和电流-电压方法对PANI的电导率进行表征测试。基于电子-空穴导电机理和经典电流密度表达式,建立了PANI的有效导电数学模型,该模型可描述为电流密度、电压、温度的函数。对模型的图形分析表明,得到的电流-电压规律与PANI的实验结果一致。对电流密度与温度的关系分析得到的电导率随温度的变化规律与实验现象相符。结果表明:PANI有机半导体主要以耦合电流为主,电流强度随电压(温度)的增加呈现先增大后减小的趋势;低温时,PANI的导电性较好。     

聚3-辛基噻吩/MWNTs复合材料的导电性能研究

采用在氯仿溶液中超声共混, 制备聚3-辛基噻吩(P3OT)和多壁碳纳米管(MWNTs)复合材料. 当MWNTs掺杂量为3%时复合材料的电导率为1.43 S•m－1, 达到纯MWNTs的电导率水平. 用FTIR光谱, TG, UV-Vis光谱, XPS和FESEM进行研究分析, 认为MWNTs的离域电子与P3OT主链上的π电子之间形成π-π共轭, 增加了P3OT主链的有效共轭度, 被掺杂的P3OT具有很高的电导率, 提高了复合材料的导电性能. MWNTs与被掺杂的P3OT组成相对独立的导体单元, 对复合材料的导电网络形成起着主要作用.     

无定形梳状高分子固体电解质的二重玻璃化转变及典型VTF…

研究了交替马酸酐共聚物多缩乙二醇酯（ＣＰ３５０）－ＬｉＮＯ３络合物的热行为及离子导电性。实验表明：ＣＰ３５０／ＬｉＮＯ３络合物在所研究的［Ｌｉ］／［ＥＯ］配比范围呈均相无定形并具有二重玻璃化转变。２个玻璃化转变温度均随盐含量的增加而上升。离子电导率随盐浓度的变化出现１个极大值，室温电导率最大可达３．７２×１０＾－５Ｓ／ｃｍ。导电行为呈典型ＶＴＦ特征。     

高聚物固体电解质聚氧化乙烯－溴化铜复阻抗谱及介电常数的静水压效应

采用分子量５００万的聚氧化乙烯和无水溴化铜，通过混溶蒸发法制备成高聚物固体电解质Ｐ（ＥＯ）ｎ－ＣｕＢｒ２薄膜，并在０．１～３００ＭＰａ范围不同的流体静水压下详细测量其复平面阻抗谱，分别得到在不同压力下离子电导率和介电常数与测量频率的关系．进一步解谱准确地求出Ｐ（ＥＯ）ｎ－ＣｕＢｒ２（ｎ＝１２、１６）薄膜离子电导率和介电常数的静水压效应，并结合Ｘ－光物相分析，根据离子迁移通道的物理图象和高聚物的极化机构进行了初步的讨论．添加２０％的增塑剂碳酸丙烯酯，较大改进了压力下的导电性．１２０～３００ＭＰａ的离子电导率提高一个数量级     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.