Green synthesis of Pt/CeO2/graphene hybrid nanomaterials with remarkably enhanced electrocatalytic properties

We developed a facile strategy for clean synthesis of Pt/CeO(2)/graphene nanomaterials with remarkably enhanced catalytic properties. The graphene oxide (GO) could be used as an oxidant to oxidize Ce(3+) into CeO(2) NPs, and l-lysine was used as a linker to realize the in situ growth of Pt NPs around CeO(2) NPs dispersed on graphene.     

Hydrogels Incorporating GdDOTA: Towards Highly Efficient Dual T(1) /T(2) MRI Contrast Agents

Do not tumble dry: Gadolinium-DOTA encapsulated into polysaccharide nanoparticles (GdDOTA?NPs) exhibited high relaxivity (r(1) =101.7?s(-1) mM(-1) per Gd(3+) ion at 37?°C and 20?MHz). This high relaxation rate is due to efficient Gd loading, reduced tumbling of the Gd complex, and the hydrogel nature of the nanoparticles. The efficacy of the nanoparticles as a T(1) /T(2) dual-mode contrast agent was studied in C6 cells.     

甲醇电氧化催化剂Pt/CeO2-CNTs与PtRu/C的比较研究

为认识合成催化剂Pt/CeO2-CNTs与商用催化剂PtRu/C(E-TEK)的催化性能和结构特点, 用CO溶出法和恒电位氧化法比较了这两种催化剂对CO的电氧化活性, 运用循环伏安法和恒电位氧化法比较了这两种催化剂对甲醇的电氧化活性. CO电氧化实验结果表明, PtRu/C上CO的电氧化活性明显优于Pt/CeO2-CNTs; 甲醇电氧化实验结果却表明, Pt/CeO2-CNTs与PtRu/C上甲醇电氧化表观活性相当. 为从结构特点上解释PtRu/C上CO电氧化和甲醇电氧化活性的不一致, 对PtRu/C进行了循环伏安扫描和CO溶出实验. 结果表明, PtRu/C的甲醇电氧化电流之所以没有预期高, 一是由于Pt比表面积不够大, 同时Pt-Ru之间协同作用有待提高. 本研究结果表明, 尽管Ru对Pt上CO电氧化有显著助催化作用, 但要充分发挥其对Pt上甲醇电氧化的助催化作用, 需同时提高Pt表面积和Pt-Ru接触界面. 该结论对设计甲醇电氧化催化剂具有普适意义.     

Relating the Composition of PtxRu100−x/C Nanoparticles to Their Structural Aspects and Electrocatalytic Activities in the Methanol Oxidation Reaction

A controlled composition‐based method—that is, the microwave‐assisted ethylene glycol (MEG) method—was successfully developed to prepare bimetallic Pt_xRu_100?x/C nanoparticles (NPs) with different alloy compositions. This study highlights the impact of the variation in alloy composition of Pt_xRu_100?x/C NPs on their alloying extent (structure) and subsequently their catalytic activity towards the methanol oxidation reaction (MOR). The alloying extent of these Pt_xRu_100?x/C NPs has a strong influence on their Pt d‐band vacancy and Pt electroactive surface area (Pt ECSA); this relationship was systematically evaluated by using X‐ray absorption (XAS), scanning electron microscopy (SEM) coupled with energy dispersive X‐ray spectroscopy (EDX), transmission electron microscopy (TEM), density functional theory (DFT) calculations, and electrochemical analyses. The MOR activity depends on two effects that act in cooperation, namely, the number of active Pt sites and their activity. Here the number of active Pt sites is associated with the Pt ECSA value, whereas the Pt‐site activity is associated with the alloying extent and Pt d‐band vacancy (electronic) effects. Among the Pt_xRu_100?x/C NPs with various Pt:Ru atomic ratios (x=25, 50, and 75), the Pt₇₅Ru₂₅/C NPs were shown to be superior in MOR activity on account of their favorable alloying extent, Pt d‐band vacancy, and Pt ECSA. This short study brings new insight into probing the synergistic effect on the surface reactivity of the Pt_xRu_100?x/C NPs, and possibly other bimetallic Pt‐based alloy NPs.     

Interrelated functionalities of hierarchically CNT/CeO2/Pt nanostructured layers: synthesis, characterization, and electroactivity

We present a free-standing catalyst layer comprising current collector/CNTs (catalyst support)/CeO(2)/Pt (catalyst) nanostructured layers, each layer constructed upon the one below it. FESEM and TEM showed that a CeO(2) layer has a fluffy morphology recalling the texture of cotton, whereas Pt nanoparticles assemble into cauliflower or broccoli-like arrangement. New insights have been gained into the effect of CeO(2) on the structural properties of the beneath CNTs layer and on the above Pt layer. First, by means of Raman analysis, it was found that interaction of CeO(2) with CNTs induced a decrease in the crystallinity of the latter. Second, by TEM and XPS analyses, it was observed that the size of Pt nanoparticles in the CNT/CeO(2)/Pt structure was inferior to that in the CNT/Pt, implying that CeO(2) influenced the dispersion quality of Pt nanoparticles. For the first time, it is observed that CeO(2) supported CNTs undergo oxidation/reduction reactions at low potentials in the ethanol electrolyte. The electrochemical analysis showed that entities produced from those redox processes are surface adsorbed/desorbed species most likely hydroxides. This unexpected electroactivity is due to the beneath CNTs that boosted the conductivity of CeO(2). Such improved conductivity of CeO(2) has fostered the electron-transfer kinetics of ethanol at Pt as demonstrated by the decreased overpotential required to oxidize ethanol and by the specific mass activity, which was greater than that of CNT/Pt.     

CeO_2/Pt复合电极及其电催化特性

应用恒电位沉积(psd)和电位脉冲沉积(ppd)法在Pt基底制备CeO2/Pt复合电极,用能量色散X射线光谱(EDX)和X射线衍射(XRD)检测CeO2纳米粒子的成分和结构,场发射扫描电子显微镜(FESEM)观察样品形貌.结果表明:CeO2颗粒细小、致密.在KOH溶液中,CeO2/Pt对甲醇氧化和氧还原有电催化作用;若在稀硫酸中溶除CeO2/Pt电极(ppd)的部分CeO2,则电极的电催化作用进一步增强.     

棒状CeO_2负载Pt催化剂的合成及其电化学性能研究

通过水热法合成棒状纳米Ce O2(Ce O2-R),并将Pt纳米颗粒负载于Ce O2表面,制得甲醇燃料电池的阳极催化剂Pt/Ce O2-R.通过结构与形貌表征,结果表明,Pt/Ce O2-R中Ce O2的暴露晶面为(111)和(002)晶面,改变了Pt周围的电子结构,进而降低了Pt-COads的键能,释放出更多的活性位.另外,Pt纳米颗粒在Ce O2-R表面分散更均匀.利用电化学工作站测试阳极催化剂Pt/Ce O2-R在酸性溶液中的电化学性能,证明Pt/Ce O2-R催化剂的甲醇电氧化性能与抗CO毒害能力较颗粒状Ce O2负载Pt催化剂(Pt/Ce O2-P)都有很大的提高,证明Ce O2-R作为Pt纳米颗粒的载体用于直接甲醇燃料电池的阳极反应具有发展潜力.     

CeO2修饰的Pt/Ni催化剂在碱性溶液中对乙醇电催化氧化性能的增强

有机小分子直接燃料电池具有高能量密度和转换效率、易贮存及运输方便等优点.在过去几十年,有机小分子化合物尤其是乙醇的电催化氧化引起了研究者的关注,高活性和稳定性及低价格的电催化剂的设计和制备一直是乙醇燃料电池的研究热点.本文采用复合电沉积方法制备了Ni和CeO2复合镀层,然后利用Ni置换铂前驱体中Pt的方法制备了纳米CeO2修饰的Pt/Ni电催化剂(Pt/Ni-CeO2).采用X射线衍射(XRD)、扫描电子显微镜(SEM)及能谱仪(EDS)等手段表征了所制样品的组成和相结构、表面形貌及组成成份.XRD结果表明,所制Pt/Ni催化剂主要是PtNi合金相结构.与Pt/Ni相比,Pt/Ni-CeO2催化剂的XRD峰强明显变弱,表明纳米CeO2修饰的Pt/Ni电催化剂的结晶性较差或者其晶体颗粒较小.这可能是由于CeO2的共沉积阻止了Ni纳米颗粒的进一步生长或团聚.当电镀液中CeO2含量为50和100 mg/L时,所制Pt/Ni-CeO2催化剂样品Pt/NiCe1和Pt/NiCe2的XRD谱上未观察到CeO2相关的衍射峰,这主要可归因于催化剂中沉积的CeO2量少或其高度分散.随着电镀液中CeO2浓度进一步增大到200 mg/L时,在Pt/Ni-CeO2催化剂(Pt/NiCe4)的XRD谱上出现了CeO2相关的衍射峰.这表明采用复合电沉积-化学还原法可以成功制备CeO2修饰的Pt/Ni电催化剂.SEM结果显示,所制催化剂都是由团聚状态的纳米颗粒组成,并且Pt/NiCe2表现出比Pt/Ni更开放的微结构,从而有利于反应物扩散至催化剂内部.该结果进一步表明共沉积的CeO2对所制Pt/Ni催化剂微结构的影响.此外,EDS结果也证实成功制备了CeO2修饰的Pt/Ni电催化剂.采用多次循环伏安、电流时间曲线和电化学阻抗谱(EIS)等手段研究了所制电催化剂的电化学性能.与Pt/Ni相比,Pt/Ni-CeO2催化剂表现出更好的电催化氧化乙醇活性和稳定性,这可能与CeO2的贮氧特性及其共沉积增大了电极的粗糙度有关.红外光谱测试结果表明,在CeO2修饰的Pt/Ni电催化剂催化氧化乙醇过程中,CH3COO?可能是乙醇氧化的主要产物.在所制催化剂中,CeO2含量影响其电催化氧化乙醇性能.循环伏安和电流时间曲线测试结果表明,随着催化剂中CeO2含量增大,催化剂活性先增加后减弱.电化学阻抗谱结果表明,随着CeO2含量增大,CeO2修饰的Pt/Ni电催化剂的接触电阻先增大后变小再变大;而电荷转移电阻不断变小.在电解液中含有100 mg/L CeO2时所制电催化剂(Pt/NiCe2)具有最佳的电催化氧化乙醇活性和稳定性.这主要与CeO2的贮氧功能、Pt与CeO2/Ni间的相互作用和其较小的接触电阻和电荷转移电阻有关.该结果可为设计和制备低价格、高活性乙醇燃料电池中的催化剂提供思路.     

CO oxidation on inverse CeO(x)/Cu(111) catalysts: high catalytic activity and ceria-promoted dissociation of O2

A Cu(111) surface displays a low activity for the oxidation of carbon monoxide (2CO + O(2) → 2CO(2)). Depending on the temperature, background pressure of O(2), and the exposure time, one can get chemisorbed O on Cu(111) or a layer of Cu(2)O that may be deficient in oxygen. The addition of ceria nanoparticles (NPs) to Cu(111) substantially enhances interactions with the O(2) molecule and facilitates the oxidation of the copper substrate. In images of scanning tunneling microscopy, ceria NPs exhibit two overlapping honeycomb-type moire? structures, with the larger ones (H(1)) having a periodicity of 4.2 nm and the smaller ones (H(2)) having a periodicity of 1.20 nm. After annealing CeO(2)/Cu(111) in O(2) at elevated temperatures (600-700 K), a new phase of a Cu(2)O(1+x) surface oxide appears and propagates from the ceria NPs. The ceria is not only active for O(2) dissociation, but provides a much faster channel for oxidation than the step edges of Cu(111). Exposure to CO at 550-750 K led to a partial reduction of the ceria NPs and the removal of the copper oxide layer. The CeO(x)/Cu(111) systems have activities for the 2CO + O(2) → 2CO(2) reaction that are comparable or larger than those reported for surfaces of expensive noble metals such as Rh(111), Pd(110), and Pt(100). Density-functional calculations show that the supported ceria NPs are able to catalyze the oxidation of CO due to their special electronic and chemical properties. The configuration of the inverse oxide/metal catalyst opens new interesting routes for applications in catalysis.     

Cerium oxide nanoparticles scavenge nitric oxide radical (˙NO)

In this study we have obtained evidence that cerium oxide nanoparticles (CeO(2) NPs) are able to scavenge nitric oxide radical. Surprisingly, this activity is present in CeO(2) NPs with a lower level of cerium in the 3+ state (CeO(2) NPs with low 3+/4+ ratio and therefore a reduced number of oxygen vacancies), in contrast to the superoxide scavenging properties which are correlated with an increased level of cerium in the 3+ state (CeO(2) NPs with high 3+/4+ ratio and therefore an increased number of oxygen vacancies).     

FePt nanoparticles assembled on graphene as enhanced catalyst for oxygen reduction reaction

Seven-nanometer FePt nanoparticles (NPs) were synthesized and assembled on graphene (G) by a solution-phase self-assembly method. These G/FePt NPs were a more active and durable catalyst for oxygen reduction reaction (ORR) in 0.1 M HClO(4) than the same NPs or commercial Pt NPs deposited on conventional carbon support. The G/FePt NPs annealed at 100 °C for 1 h under Ar + 5% H(2) exhibited specific ORR activities of 1.6 mA/cm(2) at 0.512 V and 0.616 mA/cm(2) at 0.557 V (vs Ag/AgCl). As a comparison, the commercial Pt NPs (2-3 nm) had specific activities of 0.271 and 0.07 mA/cm(2) at the same potentials. The G/FePt NPs were also much more stable in the ORR condition and showed nearly no activity change after 10?000 potential sweeps. The work demonstrates that G is indeed a promising support to improve NP activity and durability for practical catalytic applications.     

Pt/CeO2/SBA-15催化剂上Pt-CeO2接触界面的相互作用

通过沉积沉淀法(Deposition precipitation, DP)将CeO2纳米粒子高度分散在SBA-15分子筛上, 进一步采用浸渍法负载Pt后制备了 Pt/CeO2/SBA-DP催化剂. 紫外-可见漫反射光谱分析表明, 在Pt/CeO2/SBA-DP催化剂上可以形成更多的Pt-CeO2接触界面, 有利于从CeO2到Pt的电子转移过程. CO程序升温还原(CO-TPR)测试证实, Pt/CeO2/SBA-DP催化剂上CeO2表面氧物种具有较高的还原能力.     

CeO_2修饰炭载体负载PdPt二元合金催化剂及其在甲酸氧化电催化中的应用

用CeO2修饰炭粉做载体,使用有机溶胶法还原PdPt二元合金的方法制备了一系列PdPt/CeO2-C催化剂.借助电化学测试,探讨催化剂中不同Pd与Pt原子比例的PdPt二元合金和不同含量的CeO2对于甲酸电氧化催化活性的影响.不断减少PdPt合金中Pt的比例可以促使甲酸氧化的起始电位前移,当Pd：Pt=15：1时氧化电流出现极值;同时,随着催化剂中CeO2含量的增加,催化剂对于HCOOH氧化的电流密度增加,当含量为15%时达到最大值.相对于Pd/C催化剂,在Pd15Pt1/15CeO2-C催化剂表面的甲酸氧化反应起始电位负移至少0.1V,氧化的电流密度提高60%以上.结合X射线衍射（XRD）,X射线光电子能谱（XPS）,透射电镜（TEM）和热重（TG）等测试数据可以发现,当极少量的Pt与Pd形成合金,Pt与Pd之间产生电子效应,使得合金表面HCOOH氧化的过电位降低;而CeO2的添加不仅有助于PdPt二元合金的分散,更有可能改变甲酸在PdPt表面的氧化反应路径,发挥双功能机理.     

DRIFTS investigation and DFT calculation of the adsorption of CO on Pt/TiO2, Pt/CeO2 and FeOx/Pt/CeO2

Molecular structures and vibrational spectra of the CO species adsorbed on the Pt/TiO2, Pt/CeO2 and FeOx/Pt/CeO2 have been investigated by means of density functional theory (DFT) calculation and diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS). The geometrical structures and vibrational frequencies were obtained at the MPW1PW91/SDD level. Theoretical calculation shows that the calculated IR spectra were in good agreement with the experimental results. The calculated results clarify the assignment of the adsorbed CO species on the surface of Pt/TiO2, Pt/CeO2 and FeOx/Pt/CeO2.     

Pt/CexZr1-xO2催化剂上丙烷完全氧化性能研究

采用沉淀法制备了ZrO2,CeO2和Ce0.7Zr0.3O2载体,并用浸渍法制备负载型Pt催化剂。考察了500和900℃焙烧催化剂的丙烷完全氧化性能和水汽对丙烷氧化反应的影响。对于500℃焙烧的催化剂,催化剂的丙烷氧化活性顺序为:Pt/ZrO2-500>Pt/CeO2-500>Pt/Ce0.7Zr0.3O2-500;而经900℃焙烧的催化剂活性顺序为:Pt/ZrO2-900>Pt/Ce0.7Zr0.3O2-900>Pt/CeO2-900。反应气氛中水汽的存在对两种Pt/ZrO2催化剂的活性均有抑制作用(T50温度均提高了10~15℃);而对于Pt/CeO2-500催化剂有抑制作用(T50温度提高10℃),但对Pt/CeO2-900催化剂活性有促进作用(T50温度下降25℃);对于两种Pt/Ce0.7Zr0.3O2催化剂活性具有促进作用(T50温度均下降5~25℃)。表征结果表明催化剂的活性与其表面Pt物种价态密切相关,催化剂表面上Pt0物种有利于活性的提高。Pt/Ce0.7Zr0.3O2-500催化剂中只含有氧化态Pt物种(Pt^2+),而Pt/Ce0.7Zr0.3O2-900催化剂中则含有部分金属态Pt物种,因此其活性高于Pt/Ce0.7Zr0.3O2-500催化剂。     

Pt/CeO2-ZrO2变换催化剂的制备、表征与性能

 用共沉淀法制备了不同Ce/Zr比的CeO2-ZrO2复合氧化物,用浸渍法制备了Pt/CeO2-ZrO2水煤气变换催化剂,并对该催化剂进行了活性评价. 结果表明,与传统的Cu基低变催化剂相比,该催化剂具有操作温度范围宽和抗氧化冲击等优点,具有应用于车载重整制氢过程的潜力. 考察了温度、空速和汽/气比等条件对催化剂活性的影响,对催化剂的制备参数和工艺参数进行了研究. 结果表明,不同Ce/Zr比的Pt/CeO2-ZrO2催化剂的活性相差很大,其中Pt/Ce0.8Zr0.2O2变换催化剂活性最高. XRD结果表明,制备的Pt/Ce0.8Zr0.2O2形成了固溶体. 通过增加单位质量催化剂表面的Pt原子数可提高催化剂的活性.     

In situ coarsening study of inverse micelle-prepared Pt nanoparticles supported on γ-Al2O3: pretreatment and environmental effects

The thermal stability of inverse micelle prepared Pt nanoparticles (NPs) supported on nanocrystalline γ-Al(2)O(3) was monitored in situ under different chemical environments (H(2), O(2), H(2)O) via extended X-ray absorption fine-structure spectroscopy (EXAFS) and ex situ via scanning transmission electron microscopy (STEM). Drastic differences in the stability of identically synthesized NP samples were observed upon exposure to two different pre-treatments. In particular, exposure to O(2) at 400 °C before high temperature annealing in H(2) (800 °C) was found to result in the stabilization of the inverse micelle prepared Pt NPs, reaching a maximum overall size after moderate coarsening of ～1 nm. Interestingly, when an analogous sample was pre-treated in H(2) at ～400 °C, a final size of ～5 nm was reached at 800 °C. The beneficial role of oxygen in the stabilization of small Pt NPs was also observed in situ during annealing treatments in O(2) at 450 °C for several hours. In particular, while NPs of 0.5 ± 0.1 nm initial average size did not display any significant sintering (0.6 ± 0.2 nm final size), an analogous thermal treatment in hydrogen leads to NP coarsening (1.2 ± 0.3 nm). The same sample pre-dosed and annealed in an atmosphere containing water only displayed moderate sintering (0.8 ± 0.3 nm). Our data suggest that PtO(x) species, possibly modifying the NP/support interface, play a role in the stabilization of small Pt NPs. Our study reveals the enhanced thermal stability of inverse micelle prepared Pt NPs and the importance of the sample pre-treatment and annealing environment in the minimization of undesired sintering processes affecting the catalytic performance of nanosized particles.     

A new type of strong metal-support interaction and the production of H2 through the transformation of water on Pt/CeO2(111) and Pt/CeO(x)/TiO2(110) catalysts

The electronic properties of Pt nanoparticles deposited on CeO(2)(111) and CeO(x)/TiO(2)(110) model catalysts have been examined using valence photoemission experiments and density functional theory (DFT) calculations. The valence photoemission and DFT results point to a new type of "strong metal-support interaction" that produces large electronic perturbations for small Pt particles in contact with ceria and significantly enhances the ability of the admetal to dissociate the O-H bonds in water. When going from Pt(111) to Pt(8)/CeO(2)(111), the dissociation of water becomes a very exothermic process. The ceria-supported Pt(8) appears as a fluxional system that can change geometry and charge distribution to accommodate adsorbates better. In comparison with other water-gas shift (WGS) catalysts [Cu(111), Pt(111), Cu/CeO(2)(111), and Au/CeO(2)(111)], the Pt/CeO(2)(111) surface has the unique property that the admetal is able to dissociate water in an efficient way. Furthermore, for the codeposition of Pt and CeO(x) nanoparticles on TiO(2)(110), we have found a transfer of O from the ceria to Pt that opens new paths for the WGS process and makes the mixed-metal oxide an extremely active catalyst for the production of hydrogen.     

Mechanism of Pt(IV) sonochemical reduction in formic acid media and pure water

Sonochemical synthesis of platinum nanoparticles (Pt?NPs) in formic acid solutions and pure water was investigated using a 20?kHz ultrasonic irradiation. The obtained results gave new insights on the underneath Pt(IV) reduction mechanism in formic acid media under argon and in pure water under Ar/CO atmosphere. It was shown that in pure water sonochemical reduction of platinum ions occurs by hydrogen issued from homolytic water molecule split. Pt(IV)?ion reduction appears to be a very slow process under argon atmosphere in pure water due to formation of oxidizing species like OH radicals and H(2)O(2) leading to reoxidation of intermediate Pt(II) ions. Sonochemical reduction is accelerated manifold in the presence of formic acid or Ar/CO gas mixture. Solution and gas-phase analyses reveal that both CO and HCOOH act as OH(.) radical scavenger and reducing agent under ultrasonic irradiation. Their ability to reduce platinum ions at room temperature is enhanced due to the local heating in the liquid shell surround the cavitation bubble. An innovative synthesis route for monodispersed Pt?NPs in pure water without any templates or capping agents in the presence of Ar/CO gas mixture is then proposed. Obtained Pt?NPs within the range of 2-3?nm exhibited a strong stability towards sedimentation in water. Since Ar/CO atmosphere is the only restriction of the process, this procedure can be applied in various media and is also compatible with a large array of experimental conditions.     

Synthesis method-dependent photothermal effects of colloidal solutions of platinum nanoparticles used in photothermal anticancer therapy

One of the most common anticancer therapies is photothermal therapy (PTT). The effectiveness of PTT depends on the photosensitizer being a molecule which is toxic for the cancer cells after electromagnetic wave irradiation. Therefore, a simulation of PTT was performed in this work on two colon cancer cells (SW480 and SW620) using platinum nanoparticles (Pt NPs). Interestingly, in the literature the dependence between the synthesis method and the photothermal properties of Pt NPs was not discussed. Consequently, in this paper, we evaluated the photothermal properties of Pt NPs synthesized by two different methods: polyol (PtI NPs) and green chemistry (PtII NPs). Scanning transmission electron microscopy revealed that the size of both Pt NPs obtained was 2 nm, the NPs were not agglomerated, and that the PtII NPs were distributed on green tea supports. The selected area electron diffraction and X-ray diffraction analysis confirmed the crystallinity of both types of Pt NPs. Fourier-transform infrared (FTIR) spectrum of the PtII NPs showed interactions between the NPs and stretching modes for C=O groups from flavonoids and polyphenols. Therefore, these chemical compounds could be responsible for reducing Pt⁴⁺ ions to Pt⁰. Moreover, the 3-(4,5-dimethylthiazol-2-yl)-5-(3-carboxymethoxyphenyl)-2-(4-sulfophenyl)-2H-tetrazolium (MTS) assay showed that the PtII NPs exhibited 10% and 20% better cytotoxicity effect on SW480 and SW620 cells, than PtI NPs. The viability of cancer cells decreased when Pt NPs were used in PTT. The highest percentage of dead cells (82%) was observed for PtII NPs and 650-nm laser irradiation. FTIR and Raman spectroscopy showed structural changes induced by both Pt NPs and laser irradiation of cells in the range corresponding to levels of DNA, phospholipids, proteins, and lipids. Moreover, the calculated photothermal conversion efficiency showed that the value of this parameter is around 35%, regardless of the synthesis method and used wavelengths.