Cationic Surfactants as Regulators in Paper Separation of 2‐Nitrophenol and 2,4,6‐Trinitrophenol in Water

The chemical pollutants 2‐nitrophenol (2‐NP) and 2,4,6‐trinitrophenol (2,4,6‐TNP) were studied for their separation from water by the paper capillary permeation adsorption technique by the use of the four cationic surfactants dodecyltrimethylammonium chloride (DTAC), tetradecyltrimethylammonium bromide (TTAB), cetyltrimethylammonium bromide (CTAB), cetylpyridinium chloride (CPC) as regulators. The effect of pH and the concentration of surfactant on the separatability have been investigated. A nearly 100% separatability was obtained for each pollutant at its optimum pH and surfactant concentration. It was shown that the separation was accomplished via surface adsorption onto the fibers of paper. The change in separatability at basic pH 11 with surfactant variety was analyzed. The result shows that the surfactant with a longer chain alkyl group is more effective for the separation of 2‐NP and the surfactants with 16 carbons in the long chain alkyl group are most effective. The surfactants with 12 carbons or more in the long alkyl group but containing no aromatic group such as pyridyl group are equally effective for accomplishing an efficient separation of 2,4,6‐TNP. Selective separation of 2‐NP from an admixture of 2‐NP plus 2,4,6‐TNP was attempted. The optimum surfactant for each pollutant was tested with seawater for removing the pollutant. The goal of this study is to search for an optimum cationic surfactant and optimum separation conditions for nitrophenols.     

A model for the cooperative adsorption of surfactant mixtures on solid surfaces

Adsorption of surfactant mixtures on solids is of considerable theoretical and practical importance. In this study, cooperative adsorption of surfactant mixtures of nonyl phenol ethoxylated decyl ether (NP-10) and n-dodecyl-beta-D-maltoside (DM) on silica and alumina has been investigated as a function of the distribution of individual surfactants between solution and solid surface. In the mixed adsorption process, DM is identified to be the "active" adsorbing component and NP is the "passive" co-adsorbing one in the process of adsorption on alumina, while their roles are reversed on silica. A modified model has been proposed to quantify the adsorption behavior of surfactant mixtures and to obtain information in terms of aggregation number and standard free energy for surface aggregation. This model is the first model applied to the aggregation of the surfactant mixture at the solid/solution interfaces.     

Preparation of poly(2‐anilinoethanol) containing azobenzene group under electrical field and its liquid crystalline properties investigation

In this project, 2‐[N‐ethyl‐N‐[4‐[(4′‐nitrophenyl)azo]‐phenyl]amino]ethanol (Disperse Red‐I) was prepared by adding of (N‐ethyl‐2‐anilinoethanol) with the salt diazonium p‐nitroaniline. The main mesogenic liquid crystalline (LC) 2‐[N‐ethyl‐N‐[4‐[4′‐nitrophenyl)azo]‐phenyl]amino]ethyl‐3‐chloro propionate (Disperse Red‐II) was synthesized by reaction of disperse Red I and 3‐chloropropanoeic acid at the alkaline condition. Then 2‐anilinoethyl‐3‐chloropropionate‐{2‐[ethyl[4‐[(4′‐nitrophenyl)azo]phenyl]amino] ethanol}, (2AECP‐Red‐I) was prepared via reaction of disperse red‐II and 2‐anilinoethanol. On the other hand, poly 2‐anilinoethyl‐3‐chloropropionate‐{2‐[ethyl[4‐[(4′‐nitrophenyl)azo]phenyl]amino]ethanol} and poly(2AECP‐Red‐I) have been synthesized by polymerization of 2AECP‐Red‐I in two separate schemes. These include polymerization in the absence of electric field (EF) and polymerization under different EFs. A comparison of the results reveals that the polymer produced under electric field is more linear, regular in shape with high electrical conductivity, as well as good LC behavior with semectic texture. The resulted monomer and poly(2AECP‐Red‐I) are characterized by using Fourier transform infrared and ultraviolet–visible and were studied by thermogravimetric analysis and differential scanning calorimetry. Scanning electron microscopy images supported the formation of poly(2AECP‐Red‐I) and showed morphology feature and homogeneous structure on poly(2AECP‐Red‐I). Electrical conductivity of poly(2AECP‐Red‐I) has been studied by four‐point probe method. Copyright © 2014 John Wiley & Sons, Ltd.     

Interpretation of colloidal dyeing of polyester fabrics pretreated with ethyl xanthogenate in terms of zeta potential and surface free energy balance

Data are presented on the adsorption of the colloidal dye Disperse Blue 3 onto polyester fabric (Dacron 54, Stile 777), the fabric being pretreated with different amounts of the surfactant potassium ethyl xanthogenate (PEX). This study has been made by means of both the evolution of the zeta potential of the fiber/dye interface and the behaviour of the surface free energy components of the above systems. The kinetics of adsorption of the process of dyeing, using 10(-4) M of PEX in the pretreatment of the fabric, shows that increasing temperature of adsorption decrease the amount of colloidal dye adsorbed onto the fabric. This fact shows that the principal mechanism involved in this adsorption process is physical in nature. The adsorption isotherms of the colloidal dye onto polyester pretreated with different amounts of PEX, shows that the adsorption of the dye is favored with the increase in the concentration of the surfactant used in the pretreatment. This fact shows that the pretreatment with PEX is a very interesting aspect of interest in textile industry. The zeta potential of the system fabric/surfactant shows that this parameter is negative (about -25 mV) for the untreated fiber and decreases in absolute value for increasing concentration of the surfactant on the fiber, the value of the zeta potential of the system being -5 mV for 10(-2) M of PEX. This behavior can be explained for the chemical reaction nucleophilic attack between the carboxyl groups of polyester, ionized at pH 8, and the thiocarbonyl group of the xanthogenate ion. On the other hand, the zeta potential of the system polyester pretreated with PEX/Disperse Blue 3 at increasing concentrations of the surfactant and the dye shows that this parameter increases its negative value strongly with increasing concentration of the surfactant used in the treatment. This can be explained for the hydrogen bonds between the hydroxy groups of the dye and the S- ions of the thiocarbonyl group of the surfactant preadsorbed onto the fiber.     

Stability of dispersions of colloidal alumina particles in aqueous suspensions

The colloidal stability of suspensions of alumina particles has been investigated by measuring particle size distribution, sedimentation, viscosity, and zeta potential. Alumina particles were found to be optimally dispersed at pH around 3 to 7.8 without dispersant and at pH 8.5 and beyond with dispersant. The above results corroborate zeta potential and viscosity measurement data well. The surface charge of alumina powder changed significantly with anionic polyelectrolyte (ammonium polycarboxylate, APC) and the iep shifted toward more acidic range under different dispersant conditions. It was found that the essential role played by pH and dispersant (APC) on the charge generation and shift in the isoelectric point of alumina manifests two features: (i) the stability decreases on approaching the isoelectric point from either side of pH, and (ii) the maximum instability was found at pH 9.1 for alumina only and at pH 6.8 for alumina/APC, which is close to the isoelectric points for both the system, respectively. Using the model based on the electrical double-layer theory of surfactant adsorption through shift in isoelectric points, the authors could estimate the specific free energy of interaction (7.501 kcal/mol) between particles and dispersant. The interaction energy, zeta potential, sedimentation, and viscosity results, were used to explain the colloidal stability of the suspension.     

表面活性剂对Al2O3吸附MoO4^2—的影响

土壤自溶液中吸附MoO_4~(2-)会影响植物生长。前人对这一吸附过程已作过一些研究。本文报导阴离子表面活性剂十二烷基硫酸钠(SDS),阳离子表面活性剂氯化十六烷基吡啶(CPC)和非离子表面活性剂吐温-20(TW-20)对Al_2O_3吸附MoO_4~(2-)的影响。 实验所用吸附剂为层析用中性Al_2O_3(上海五四农场化学试剂厂),SDS(化学纯,广东石岐化工厂),CPC(化学纯。上海试剂一厂),TW—20(试剂级),其余试剂均为分析纯,含钼液用Na_2MoO_4配制。     

Dispersion of Colloidal Alumina using a Rhamnolipid Biosurfactant

Dispersability of colloidal alumina in water has been studied using a rhamnolipid containing biosurfactant. Zeta potential measurements revealed that the surface charge of alumina was altered due to adsorption of the biosurfactant and the iso‐electric‐point of alumina shifted from pH 9 to 6.3. Sedimentation tests indicated that the alumina suspension was completely dispersed for 3–5 hours in the presence of biosurfactant after which some settling was observed. Stability of the suspension in the time period studied was found to be independent of pH. Capillary suction time measurements showed that the alumina suspension was dispersed in the presence of the biosurfactant and varied with pH. Maximum dispersion is obtained in the pH range of 3.5–5 and 7–11 while a minimum is obtained around pH 6. This behavior is consistent with the changes in zeta potential in the presence of the biosurfactant and thus capillary suction time measurements appeared to be more reliable than the sedimentation tests. Optimization studies showed that about 60 mg/g of biosurfactant was necessary for best dispersion and dispersion could be done up to 40% solids. The application of a natural biosurfactant for dispersing colloidal alumina has been demonstrated.     

pH dependence of adsorption of n-dodecyl-beta-D-maltoside on solids

Adsorption of surfactants on solids plays an important role in industrial operations such as separation, lubrication, flotation, dispersion, chemical mechanical polishing, and enhanced oil recovery. In this work, adsorption of a typical biodegradable nonionic surfactant, n-dodecyl-beta-d-maltoside, on solids was studied to explore its potential applications. Even though it is a nonionic surfactant, significant pH-dependence was revealed for the adsorption on alumina in the range from pH 4 to 7. The adsorption density was found to be proportional to the concentration of surface AlOH group among Al(OH(2))(+) and AlO(-) groups. The equilibriums among the surface species are governed by pH through surface ionization reactions. The surface AlOH group evidently determines the formation of hydrogen bonding between the surfactant molecules and the solid surface and thus the adsorption. Similar correlation was also found in the case of hematite. The results help to understand the mechanism of adsorption of sugar-based surfactant on solids.     

Interaction of Plasma Proteins with Tri‐quaternary Ammonium Salt Cationic Surfactant Studied by QCM‐D

A tri‐quaternary ammonium salt cationic surfactant was synthesized. Its structure was confirmed by using Fourier‐transform infrared spectroscopy, ¹H nuclear magnetic resonance spectroscopy, and X‐ray photoelectron spectroscopy analyses. Three model surfaces, including Au‐CH₃, Au‐OH and Au‐COOH, were fabricated. Adsorptions of surfactant on the three model surfaces and subsequent plasma proteins adsorption were investigated by quartz crystal microbalance with dissipation (QCM‐D). The mass of surfactant on the Au‐COOH surface was the largest, followed by that on the Au‐CH₃ surface, and that on the Au‐OH surface. These results suggested that the main driving force of surfactant immobilization was electrostatic interaction followed by hydrophobic interaction. Based on the results obtained, we concluded that the protein mass adsorbed on Au‐CH₃‐ S , Au‐OH‐ S , and Au‐COOH‐ S surfaces depended on the protein size and orientation. The mass and thickness of S on the Au‐COOH surface is the largest and the protein adsorption capacity of Au‐COOH‐ S surface is inferior to that of Au‐CH₃‐ S . The Au‐COOH‐ S surface could inhibit lysozyme adsorption, maintain the adsorption balance of bovine serum albumin, and induce fibrinogen‐binding protein adsorption.     

Influence of surfactant addition on the stability of concentrated alumina dispersions in water

The goal of this study was to assess the effects of surfactant addition on the stability and viscosity of concentrated alumina dispersions. The stabilizing effects of several candidate surfactants were investigated for concentrated dispersions of two different pseudoboehmite aluminas at pH 4 and 7. The stabilities of concentrated alumina dispersions treated by pH adjustment alone and by pH adjustment combined with surfactant addition were compared to assess the degree to which the surfactant enhanced stability. The initial rate of mass removal from a sedimenting alumina dispersion was used as a measure of stability.

The anionic surfactants Surfine WNT-A and DOWFAX 3B2 were identified as effective in enhancing the stability of concentrated alumina dispersions. The optimal doses of these surfactants for stabilizing 15% by weight VERSAL™ 250 alumina dispersions at pH 4 were determined to be about 4.6 × 10⁻⁵ mol g⁻¹ for both surfactants. On the basis of the initial rate of mass removal, surfactant-stabilized 15 wt.% suspensions were found to be approximately 2.5 and 10.6 times more stable than similar dispersions stabilized electrostatically by pH adjustment alone. These more stable dispersions exhibited lower viscosities than observed for the alumina dispersions not subjected to surfactant addition. The results indicate that the stability of concentrated alumina dispersions can be enhanced by anionic surfactant addition, and that such surfactants may therefore help to control the rheology of concentrated dispersions of alumina in water.     

SURFACE PROPERTIES OF SOME LOW MOLECULAR WEIGHT PROTEINS

Surface properties of four proteins having molecular weights less than 5,000 are reported at air/water and alumina/water interface at pH 7.0. Reversibility in the adsorption of these proteins at the alumina/water interface is tested. The adsorption on alumina/water interface has been found to be controlled by electrostatic interaction. Positive adsorption was obtained when protein and alumina surface had opposite charges and negative adsorption was obtained when both protein and surface had same charges. Of the four proteins reversibility in adsorption was observed with the one having the lowest molecular weight of 3100. The adsorption behavior apparently had no correlation with their surface hydrophobic!ty. Time dependent changes in air/water interfacial tension was observed for all the four proteins indicating time dependent loosening of compact protein structure and surface unfolding.     

Alumina interaction with AMPS-MPEG random copolymers I. Adsorption and electrokinetic behavior

Adsorption of brush copolymers, bearing sulfonate groups and polyethylene glycol segments, on to alumina particles in suspension in water has been investigated. Study of the adsorption isotherms revealed that the copolymers displayed a strong affinity for the surface of the alumina regardless of the fraction of ionic groups on the polymer. For poly(ethylene glycol) content greater than 50%, the adsorption isotherms revealed an initial adsorption plateau followed by a second one. The shape of the adsorption isotherms was interpreted in terms of the polymer configuration at the solid-to-liquid interface. The effects of the pH and the ionic force on adsorption were studied and connected to the effects of interaction between chain segments at the surface of the alumina particles. Changes in the electrokinetic properties of the alumina particles after addition of the copolymers were investigated by following the zeta potential of particles as a function of pH. In the presence of the copolymer continuous shift of the isoelectric point IEP to a more acidic values was observed. Beyond a certain concentration the zeta potential remained negative regardless of the pH.     

Influence of Light Scattering by Residual Alumina Nanoparticles on the Analysis of Surfactants Adsorption Using Spectroscopy

The adsorption of a surfactant mixture, based on an anionic surfactant, sodium dodecyl benzenesulfonate (SDBS) and a nonionic surfactant (Triton X-100, or TX100), on alumina nanoparticles was determined by solution depletion method combined with spectrometric measurement. It is shown that the light scattering, originated from the residual adsorbent alumina particles in the supernatant after centrifugation separation, interferes with the measurements of absorbance of the surfactant molecules, and therefore constitutes an error source for determination of the surfactant concentration in the supernatant by spectrometric means. The intensity of this light scattering, namely the influence of the residual alumina nanoparticles upon the surfactant adsorption, was related to the surfactant adsorption and its equilibrium concentration and varied among a batch. In this paper we report a Kalman filter method in order to eliminate the variational scattering background caused by non-separated residual alumina nanoparticles in each supernatant. This method is of interest as it is simple, easy to carry out and of high precision.     

Plane‐wave density functional theory investigation of adsorption of 2,4,6‐trinitrotoluene on al‐hydroxylated (0001) surface of (4 × 4) α‐alumina

This article reports the results of the theoretical investigation of adsorption of 2,4,6‐trinitrotoluene (TNT) on Al‐hydroxylated (0001) surface of (4 × 4) α‐alumina (α‐Al₂O₃) using plane‐wave Density Functional Theory. Sixteen water molecules were used to hydroxylate the alumina surface. The Perdew–Burke–Ernzerhof functional and the recently developed van der Waals functional (vdW‐DF2) were used. The interaction of electron with core was accounted using the Vanderbilt ultrasoft pseudopotentials. It was found that hydroxylation has significant influence on the geometry of alumina and such changes are prominent up to few layers from the surface. Particularly, due to the Al‐hydroxylation the oxygen layers are decomposed into sublayers and such partitioning becomes progressively weaker for interior layers. Moreover, the nature of TNT adsorption interaction is changed from covalent type on the pristine alumina surface to hydrogen‐bonding interaction on the Al‐hydroxylated alumina surface. TNT in parallel orientation forms several hydrogen bonds compared to that in the perpendicular orientation with hydroxyl groups of the Al‐hydroxylated alumina surface. Therefore, the parallel orientation will be present in the adsorption of TNT on Al‐hydroxylated (0001) surface of α‐alumina. Further, the vdW‐DF2 van der Waals functional was found to be most suitable and should be used for such surface adsorption investigation. © 2014 Wiley Periodicals, Inc.     

Kinetics of sodium dodecyl benzene sulfonate adsorption on hematite and its interaction with polyacrylamide

This article describes the adsorption of sodium dodecyl benzene sulfonate, an anionic surfactant, on a hematite surface and that when the surface is preadsorbed with polyacrylamide. The adsorption of surfactant on a hematite surface has been studied through equilibration and during kinetics measurements at three pH levels, viz. 4.0, 7.0, 8.9. The surfactant adsorbs strongly on the hematite surface. The adsorption density at equilibrium as well as the rate of adsorption are dependent on the suspension pH. The maximum adsorption density has been observed at pH 4, which reflects strong adsorption of negatively charged sulfonate ions on the oppositely charged Fe₂O₃ surface (point of zero charge, 6.4). The adsorption density reaches its equilibrium value sooner in the case of an alkaline suspension and later in the case of acidic pH. The polymer surfactant interaction has been noticed in the present study and is also a function of pH. The hematite mineral when preadsorbed with the polymer draws fewer of the surfactant molecules at lower surface coverage (during the initial period of the kinetics measurement) irrespective of the pH. When the adsorption of the surfactant reaches a value which is near the equilibrium one, the pH effect is evident. In the case of acidic pH, the surfactant adsorbs more on the hematite surface when preadsorbed with the polymer compared to the bare surface. In the case of neutral or alkaline pH, however, the density of surfactant adsorption remains lower throughout the kinetics measurement when the surface is preadsorbed with the flocculant compared to the bare surface. The particles also remain flocculated till the end of the experiment, whereas at pH 4 the particles are deflocculated. In addition to pH, the electrostatic nature of the adsorbent and the presence of anionic surfactant have an influence on the flocculation–deflocculation phenomena. The polymer–surfactant interaction has been schematically represented. The surfactant is bound with polymeric chains as a combination of its monomeric form as well as in the form of association in the case of acidic media and in competition with polymer in the case of alkaline media. Received: 18 April 2000/Accepted: 2 August 2000     

Optimization of cadmium adsorption from aqueous solutions by functionalized graphene and the reversible magnetic recovery of the adsorbent using response surface methodology

Novel functionalized graphene adsorbent was prepared and characterized using different techniques. The prepared adsorbent was applied for the removal of cadmium ions from aqueous solution. A response surface methodology was used to evaluate the simple and combined effects of the various parameters, including adsorbent dosage, pH, and initial concentration. Under the optimal conditions, the cadmium removal performance of 70% was achieved. A good agreement between experimental and predicted data in this study was observed. The experimental results revealed of cadmium adsorption with high linearity follow Langmuir isotherm model with maximum adsorption capacity of 502 mg g^?1, and the adsorption data fitted well into pseudo‐second order model. Thermodynamic studies showed that adsorption process has exothermic and spontaneous nature. The recommended optimum conditions are: cadmium concentration of 970 mg L^?1, adsorbent dosage of 1 g L^?1, pH of 6.18, and T = 25 °C. The magnetic recovery of the adsorbent was performed using a magnetic surfactant to form a noncovalent magnetic functionalized graphene. After magnetic recovery of the adsorbent both components (adsorbent and magnetic surfactant) were recycled by tuning the surface charges through changing the pH of the solution. Desorption behavior studied using HNO₃ solution indicated that the adsorbent had the potential for reusability.     

Adsorption of mixtures of nonionic sugar-based surfactants with other surfactants at solid/liquid interfaces I. Adsorption of n-dodecyl-beta-D-maltoside with anionic sodium dodecyl sulfate on alumina

Sugar-based surfactants can be synthesized from renewable materials and are environmentally benign. They have some unique solution and interfacial properties and have potential applications in a wide variety of processes, and there is a need for corresponding information on their behavior at various interfaces. In this study, co-adsorption of nonionic sugar-based n-dodecyl-beta-D-maltoside (DM) and anionic sodium dodecyl sulfate (SDS) on alumina was studied as a function of mixing ratios and solution pHs. It is found that at solid-liquid interface, depending on the solid type and the solution conditions, there are various interactions that dictate synergy or antagonism. At pH 6 where alumina is positively charged, marked synergistic effects between DM and SDS were observed, while at pH 11 where alumina is negatively charged, SDS shows antagonistic adsorption effects with DM. The ratios of surfactant components on solids change as a function of surfactant structure and concentrations as well, indicating various interactions at solid/liquid interface under different conditions that can be utilized for many industrial processes.     

Negative adsorption due to electrostatic exclusion of micelles

Interactions of surfactants with solid substrates are important in the controlling of processes such as flotation, coating, flocculation and sedimentation. These interactions usually lead to adsorption on solids, but can also result in an exclusion of the reagents with dire consequences. In this work electrostatic exclusion of negatively charged dodecylbenzene sulfonate micelles from quartz/water, Bio-Sil/water and alumina/water interfaces has been investigated as a function of pH and ionic strength. Measurable negative adsorption of these surfactants from similarly charged solid/liquid interface was observed in the micellar region. In the case of porous samples with large surface area, comparison of pore size with the micelle size is necessary to avoid any erroneous conclusions regarding the role of electrostatic exclusion in a given system. A theoretical model for the electrostatic exclusion of micelles is developed and used to calculate the adsorption of negatively charged dodecylbenzene sulfonate on negatively charged quartz (pH 7), silica (Bio-Sil A, pH 3) and alumina (pH 11) in the micellar concentration region. The micellar exclusion values calculated using the model are in excellent agreement with the experimental results.     

Modifying the adsorption properties of anionic surfactants onto hydrophilic silica using the pH dependence of the polyelectrolytes PEI, ethoxylated PEI, and polyamines

The manipulation of the adsorption of the anionic surfactant, sodium dodecyl sulfate, SDS, onto hydrophilic silica by the polyelectrolytes, polyethyleneimine, PEI, ethoxylated PEI, and the polyamine, pentaethylenehexamine, has been studied using neutron reflectometry. The adsorption of a thin PEI layer onto hydrophilic silica promotes a strong reversible adsorption of the SDS through surface charge reversal induced by the PEI at pH 7. At pH 2.4, a much thicker adsorbed PEI layer is partially swelled by the SDS, and the SDS adsorption is now no longer completely reversible. At pH 10, there is some penetration of SDS and solvent into a thin PEI layer, and the SDS adsorption is again not fully reversible. Ethoxylation of the PEI (PEI-EO(1) and PEI-EO(7)) results in a much weaker and fragile PEI and SDS adsorption at both pH 3 and pH 10, and both polymer and surfactant desorb at higher surfactant concentrations (>critical micellar concentration, cmc). For the polyamine, pentaethylenehexamine, adsorption of a layer of intermediate thickness is observed at pH 10, but at pH 3, no polyamine adsorption is evident; and at both pH 3 and pH 10, no SDS adsorption is observed. The results presented here show that, for the amine-based polyelectrolytes, polymer architecture, molecular weight, and pH can be used to manipulate the surface affinity for anionic surfactant (SDS) adsorption onto polyelectrolyte-coated hydrophilic silica surfaces.     

阳离子膨润土对分散染料的吸附动力学研究

研究了阳离子膨润土(EPI-DMA/Bt, PD/Bt, CTMAB/Bt)对分散染料(分散黄棕S-2RFL, 分散大红S-R, 分散蓝SBL, 分散黄SE-6GFL)的吸附动力学行为. 结果表明, 阳离子膨润土对分散染料的吸附过程符合二阶段吸附速率方程, 各阶段具有不同的吸附动力学常数(k1, k2)以及吸附活化能(Ea1, Ea2)、活化焓(ΔH*1, ΔH*2)和活化熵(ΔS*1, ΔS*2); 在阳离子膨润土对分散染料的吸附过程中, k1随着阳离子插层剂烷烃链的增加而增大, 表明较大的晶片层间距, 疏水的层间域和表面正电荷增加均有利于吸附速率增大; 对于两个吸附动力学阶段, ΔH★1<-TavΔS★1, △H★2<-TavΔS★2和ΔG★>0表明整个吸附过程活化熵的影响大于活化焓.