激光促进乙烯在磷酸铁上的表面反应

激光促进表面反应;丁二烯;激光促进乙烯在磷酸铁上的表面反应     

激光促进了烷裂解表面反应过程中的能量传递

本文利用红外光谱、化学吸咐和激光表面反应技术,研究了丁烷在H-ZSM-5分子筛、SiO_2和γ-A1_2O_3表面上的激光表面反应规律;研究了不同激发模式、固体表面材料的红外特性及化学吸附能力、激光脉冲次数及脉冲间隔时间等因素对激光光能利用率的影响;证实了固体表面键激发模式的有效性,探讨了激光表面反应过程中能量吸收、积累、传递和损失的途径,提出了激光促进丁烷裂解的表面反应机理。     

钒钼复合氧化物表面上激光促进异丁烷选择氧化制甲基丙烯酸

表面反应;钒钼复合氧化物表面上激光促进异丁烷选择氧化制甲基丙烯酸     

铋钼复合氧化物表面上激光促进异丁烷选择氧化制甲基丙烯酸

 用共沉淀法制备了Bi和Mo的复合氧化物固体材料．运用XRD,IR,TPD和激光促进表面反应（LSSR）技术研究了其晶体结构、表面构造、化学吸附特性和激光促进异丁烷选择氧化反应性能．结果表明：Bi－Mo－O复合氧化物含有α－Bi2Mo3O12和少量γ－Bi2MoO6晶相;其表面上存在着Lewis碱位（MoO和Mo—O—Bi键中的O）及Lewis酸位（Bi3＋）;异丁烷的两个甲基H分别吸附在两个相邻的Lewis碱位MoO上,形成双位分子吸附态;在常压和200℃条件下,用一定频率的激光激发MoO键1000次,异丁烷的转化率可达11．2％,其反应产物是异丁烯、甲基丙烯醛和甲基丙烯酸,其中甲基丙烯酸的选择性为90％．根据实验结果,探讨了激光促进异丁烷选择氧化为甲基丙烯酸的表面反应机理．     

饿钼复合氧化物表面上激光促进异丁烷选择氧化制甲基丙烯酸

用共沉淀法制备了Bi和Mo的复合氧化物固体材料,运用XRD,IR,TPD和激光促进表面反应（LSSR）技术研究了其晶体结构、表面构造、化学吸附特性和激光促进异丁烷选择氧化反应性能,结果表明：Bi-Mo-O复合氧化物含有α-Bi2Mo3O12和少量γ-Bi2MoO6晶相;其表面上存在着Lewis碱位（Mo=O和Mo-O-Bi键中的O)及Lewis酸位（Bi^3 );异丁烷的两个甲基H分别吸附在两个相邻的Lewis碱位Mo=O上,形成双位分子吸附态;在常压和200℃条件下,用一定的激光激发Mo=O键1000次,异丁烷的转化率可达11.2％,其反应产物是异丁烯、甲基丙烯醛和甲基丙烯酸,其中甲基丙烯酸的选择性为90％,根据实验结果,探讨了激光促进异丁烷选择氧化为甲基丙烯酸的表面反应机理。     

激光促进锂铋磷酸盐表面异丁烷选择氧化反应

用共沉淀法制备了5％Li3PO4•BiPO4固体材料.运用XRD、IR、TPD和LSSR技术研究了其晶体结构、表面构造、化学吸附特性和激光促进异丁烷选择氧化表面反应性能.结果表明,复合盐的主体晶相为简单单斜晶型的BiPO4,Li3PO4以分子分散态掺杂主体相中;其表面存在Lewis碱位P=O和P－O－Bi键中的O2－及Lewis酸位Bi3＋和Li＋;异丁烷的两个甲基中的H分别吸附在两个相邻的Lewis碱位P=O上,形成双位分子吸附态;在常压和200℃下,用一定频率的激光激发P=O键1000次,异丁烷的转化率为11.3％,甲基丙烯酸的选择性为72％.根据实验结果,探讨了激光促进异丁烷选择氧化为MAA的表面反应机理.     

激光促进异丁烷选择氧化制甲基丙烯酸

用共沉淀法制备了Fe和Mo的复合氧化物.运用XRD、 IR、 TPD和LSSR技术研究了其晶体结构、表面构造、化学吸附特性和激光促进异丁烷选择氧化反应性能.结果表明: Fe-Mo-O的主体物相为Fe2(MoO4)3,并有少量的MoO3相;其表面上存在Lewis碱位(Mo=O和Mo-O-Fe键中的O)及Lewis酸位Fe3+;异丁烷的两个甲基H分别吸附在两个相邻的Lewis碱位(Mo=O)上形成双位分子吸附态;在常压和200℃条件下,用一定频率的激光激发Mo=O键1000次,异丁烷的转化率为5.8%,其反应产物是异丁烯、甲基丙烯醛和甲基丙烯酸,其中甲基丙烯酸的选择性为80%.根据实验结果,探讨了激光促进异丁烷选择氧化为甲基丙烯酸的表面反应机理.     

激光促进Pb和Bi磷酸盐表面上异丁烷氧化脱氢反应

采用沉淀法制备了Pb₃(PO₄)₂和BiPO₄固体材料,用XRD,IR,TPD和LSSR等手段对Pb₃(PO₄)₂和BiPO₄的晶体结构、表面构造、化学吸附性能和激光促进异丁烷氧化脱氢反应性能进行了研究.结果表明,固体材料表面由Lewis碱位P＝O和P-O-M(Pb或Bi)键中的O^2-及Lewis酸位Pb²⁺或Bi³⁺构成;异丁烷分子中两个甲基中的H分别吸附在两个相邻的Lewis碱位P＝O上,形成双位分子吸附态;在常压和200℃条件下,用一定频率的激光激发固体表面P＝O键,发生异丁烷氧化脱氢反应,产物异丁烯的选择性大于95%,在激光促进表面反应体系中,激光能量的利用率主要取决于固体材料的振动结构和对反应物分子的吸附能力,反应产物的选择性主要决定于反应物分子在固体表面上的吸附态.     

激光促进甲醇在氧化物上的表面反应

运用红外光谱（IR）、程序升温脱附（TPD）技术,对甲醇吸附在氧化物SiO2、γ－Al2O3和MgO表面所形成的反应体系进行了红外振动结构和化学吸附形态分析,并引入1052cm^-1激光,研究了上述体系的激光促进表面反应（LSSR）规律。结果表明：所选固体材料能够明显促进甲醇光促分解反应,室温条件下即可在SiO2上达到40.5%的转化率;另外与甲醇吸附强度和吸附量相比,反应体系的振动结构对LSSR效率起着更为重要的作用,SiO2因能够较好地吸收、传送激光能量而具有比γ－Al2O3和MgO更好的促进反应性能。最后,根据表征和反应结果给出了反应机理的模型。     

激光促进乙醇氧化偶联表面反应机理

利用红外光谱（IR）和激光促进表面反应（LSSR）等技术，研究了沉淀法制得Cu2（PO4）（OH）表面上的乙醇氧化偶联合成1，4-丁二醇激光表面反应机理，结果表明：固体表面键激发是激光表面反应的有效激发模式; 乙醇在固体表面材料上的特定化学吸附态形式（－P＝O…H－CH2CH2OH）决定了反应产物的高选择性；固体材料表面晶格氧参与反应是使标题反应能够实现的一个重要因素．     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Microwave-assisted copper-catalyzed stereoselective ring expansion of three-membered heterocycles with α-diazo-β-dicarbonyl compounds

Microwave-assisted copper-catalyzed ring expansions of three-membered heterocycles with α-diazo-β-dicarbonyl compounds were investigated. Thiiranes generated 3-acyl-5,6-dihydro-1,4-oxathiines in the presence of copper sulfate and trans-3-acyl-5,6-dihydro-1,4-oxathiines as stereospecific products for 1,2-disubstituted cis-thiiranes through an intramolecular S_N2 process. Oxiranes gave rise to 2-acyl-5,6-dihydro-1,4-dioxines under the catalysis of copper hexafluoroacetylacetonate and cis-3-acyl-5,6-dihydro-1,4-dioxines as stereospecific products for 1,2-disubstituted cis-oxiranes via an intimate ion-pair mechanism. The current method provides a direct and simple strategy in efficient preparation of 3-acyl-5,6-dihydro-1,4-oxathiines and 2-acyl-5,6-dihydro-1,4-dioxines, important agents in medicinal and agricultural chemistry, from readily available thiiranes and oxiranes, respectively.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.