MoS2/Cd2SnO4复合材料的制备及其气敏性能

采用水热-煅烧法制备Cd₂SnO₄,之后通过超声混合法得到一系列MoS₂/Cd₂SnO₄复合材料。采用X射线衍射、扫描电子显微镜、X射线光电子能谱对Cd₂SnO₄和一系列MoS₂/Cd₂SnO₄复合材料进行结构和形貌的表征。研究了MoS₂掺杂量对于MoS₂/Cd₂SnO₄复合材料的气敏性能影响。实验结果表明,当MoS₂与Cd₂SnO₄的质量比为2.5%,MoS₂/Cd₂SnO₄复合材料制备的气敏元件在170 ℃时对浓度为100 μL·L^-1的甲醛气体的灵敏度为40.0,最低检测限为0.1 μL·L^-1。     

La3+掺杂CaFe2O4材料的制备及室温检测超低浓度甲醛

采用静电纺丝法成功制备了La³⁺掺杂CaFe₂O₄材料。通过X射线衍射、扫描电子显微镜和X射线光电子能谱对La³⁺掺杂CaFe₂O₄材料的结构和形貌进行了表征。随后，研究了La³⁺的掺杂量（质量分数）对CaFe₂O₄气敏性能的影响。研究表明，3% La³⁺掺杂CaFe₂O₄材料在室温下对100 μL·L^-1甲醛的响应最高（R_a/R_g=14.1）。更为重要的是，对甲醛的最低检测限低至0.1 nL·L^-1，并且响应/恢复时间仅为4.3 s/8.4 s。     

Ti3C2Tx/MnO2正极在水系锌电池中的电化学性能

二氧化锰(MnO₂)材料具有比容量大、电极电位高、储量丰富以及价格低廉等优势,成为水系锌电池正极最受关注的一类材料,然而其仍然存在着结构稳定性差和电化学储存机理复杂的问题。因此,我们通过两步合成法制备了一种花苞状结构的MnO₂负载在Ti₃C₂T_x表面形成Ti₃C₂T_x/MnO₂复合材料,通过X射线粉末衍射(XRD)、X射线光电子能谱(XPS)、透射电子显微镜(TEM)和高分辨透射电子显微镜(HRTEM)对复合样品的结构、成分和形貌进行表征。通过将Ti₃C₂T_x/MnO₂复合材料作为正极,与锌负极匹配组装成水系锌电池,研究了其分别在2 mol·L^-1 ZnSO₄、2 mol·L^-1 ZnSO₄+0.1 mol·L^-1 MnSO₄、30 mol·L^-1三氟甲基磺酸四乙基铵(TEAOTf)+1 mol·L^-1三氟甲烷磺酸锌(ZnOTf)和3 mol·L^-1 ZnOTf四种电解液中的电化学性能。结果表明,Ti₃C₂T_x/MnO₂在2 mol·L^-1 ZnSO₄中的比容量较高,但循环稳定性很差。将TEAOTf盐和ZnOTf盐共溶于水中,设计了一种新型的含惰性阳离子的超高浓度盐包水电解液(30 mol·L^-1 TEAOTf+1 mol·L^-1 ZnOTf),不仅提高了Ti₃C₂T_x/MnO₂材料的可逆性,而且有效抑制了电极材料在循环过程中的溶解。     

纳米CuFe2O4-rGO复合材料的制备及电化学性能

采用溶剂热法成功制备了纳米CuFe₂O₄-rGO复合材料。通过X射线衍射（XRD）,扫描电子显微镜（SEM）、透射电子显微镜（TEM）和电化学工作站对样品的结构、形貌及电容特性进行表征。结果表明,CuFe₂O₄纳米粒子均匀地分散在石墨烯片层间,其中CuFe₂O₄-20% rGO复合材料具有最优的电化学性能,当电流密度1 A·g^-1时,其比电容为1 952.5 F·g^-1,当电流密度为1 A·g^-1时,CuFe₂O₄-20% rGO复合材料经1 000次充放电后的比电容保持率为86.17%。     

尖晶石型LiMn2O4的制备及超级电容性能研究

采用高温固相法制备LiMn₂O₄。X射线衍射结果表明800 ℃下得到尖晶石型LiMn₂O₄。利用恒流充放电、循环伏安和交流阻抗等研究了LiMn₂O₄电极材料在2 mol·L^-1 (NH₄)₂SO₄溶液中的超级电容性能。循环伏安测试结果表明LiMn₂O₄电极材料在0～1 V电位窗口范围内具有较好的方形特征；恒流充放电结果表明充放电曲线呈现出较规整的三角形对称分布，放电曲线呈直线关系，5 mA·cm^-2下的放电比容量为141 F·g^-1，具有较高的充放电效率，循环性能稳定；交流阻抗结果也显示LiMn₂O₄电极材料在2 mol·L^-1 (NH₄)₂SO₄中具有典型的电容阻抗特性。     

二维层状Ti3C2Tx-MXene@VS2用于高性能锂离子电池负极

为探索一种高性能的锂离子电池负极材料,采用酸刻蚀法制备了高导电性、高稳定性的二维层状Ti₃C₂T_x,通过溶剂热法制备了具有高理论比容量的花瓣状VS₂纳米片,再经过简单的液相混合得到了二维层状Ti₃C₂T_x-MXene@VS₂复合物。通过扫描电子显微镜、透射电子显微镜、X射线光电子能谱、X射线衍射和能谱分析对复合材料的形貌和结构进行了表征,采用循环伏安、恒流充放电、长循环和交流阻抗谱对复合材料的电化学性能进行了研究。结果表明：VS₂纳米片均匀地分布在Ti₃C₂T_x的层间及表面,该复合物具有高的可逆容量(电流密度为0.1A·g^-1时,比容量为610.5mAh·g^-1)、良好的倍率性能(电流密度为2A·g^-1时,比容量为197.1mAh·g^-1)和良好的循环稳定性(电流密度为0.2 A·g^-1时,循环600圈后比容量为874.9 mAh·g^-1;电流密度为2 A·g^-1时,循环1 500圈后比容量为115.9mAh·g^-1)。     

Co3O4/ZnO修饰针灸针的制备及其在葡萄糖检测领域的应用

将Co₃O₄/ZnO针状纳米棒材料修饰到针灸针表面用于检测葡萄糖浓度的变化。首先采用水热法在针灸针表面得到Co（CO₃）_0.5（OH）·0.11H₂O针状纳米棒前驱体,然后在500 ℃条件下退火3 h得到Co₃O₄针状纳米棒阵列。再采用浸渍法将预制备好的ZnO量子点修饰到Co₃O₄针状纳米棒表面,得到Co₃O₄/ZnO复合修饰的针灸针。研究发现此针灸针对葡萄糖具有较好的电流响应（2 264.27 μA·L·mmol^-1·cm^-2）、较快的响应速度（<4 s）及较低的检测极限（0.311 μmol·L^-1（S/N=3））。且该针灸针在用于检测人体模拟细胞液中葡萄糖浓度时,对抗坏血酸和尿素等表现出较强的抗干扰性。     

Co3O4/ZnO修饰针灸针的制备及其在葡萄糖检测领域的应用

将Co₃O₄/ZnO针状纳米棒材料修饰到针灸针表面用于检测葡萄糖浓度的变化。首先采用水热法在针灸针表面得到 Co（CO₃）_0.5（OH）·0.11H₂O针状纳米棒前驱体,然后在500 ℃条件下退火3 h得到Co₃O₄针状纳米棒阵列。再采用浸渍法将预制备好的ZnO量子点修饰到Co₃O₄针状纳米棒表面,得到Co₃O₄/ZnO复合修饰的针灸针。研究发现此针灸针对葡萄糖具有较好的电流响应（2 264.27 μA·L·mmol^-1·cm^-2）、较快的响应速度（<4 s）及较低的检测极限（0.311 μmol·L^-1（S/N=3））。且该针灸针在用于检测人体模拟细胞液中葡萄糖浓度时,对抗坏血酸和尿素等表现出较强的抗干扰性。     

Li1.2Mn0.54Ni0.13Co0.13O2正极材料的Ga2O3包覆改性及电化学性能

首先采用共沉淀方法制备富锂锰基正极材料 Li_1.2Mn_0.54Ni_0.13Co_0.13O₂原始样品(P-LRMO), 然后通过简单的湿化学法以及低温煅烧方法对其进行不同含量 Ga₂O₃原位包覆。透射电子显微镜(TEM)以及 X射线光电子能谱(XPS)结果表明在 P-LRMO表面成功合成了 Ga₂O₃包覆层。电化学测试结果表明:含有 3 %Ga₂O₃的改性材料 G3-LRMO具有最优的电化学性能, 其在 0.1C倍率(电流密度为 25 mA·g^-1)下首圈充放电比容量可以达到 270.1 mAh·g^-1, 在 5C倍率下容量仍能保持 127.4 mAh·g^-1, 优于未改性材料的 90.7 mAh·g^-1, 表现出优异的倍率性能。G3-LRMO在 1C倍率下循环 200圈后仍有 190.7 mAh·g^-1的容量, 容量保持率由未改性前的 72.9 %提升至 85.6 %, 证明 Ga₂O₃包覆改性能有效提升富锂锰基材料的循环稳定性。并且, G3-LRMO在 1C倍率下循环 100圈后, 电荷转移阻抗(R_ct)为 107.7 Ω, 远低于未改性材料的 251.5 Ω, 表明 Ga₂O₃包覆层能提高材料的电子传输速率。     

多孔软硬磁Ni0.5Zn0.5Fe2O4/SrFe12O19复合纤维制备及吸波性能

通过静电纺丝技术制备了多孔软硬磁Ni_0.5Zn_0.5Fe₂O₄/SrFe₁₂O₁₉复合纤维,利用综合热重分析仪（TG-DSC）、X射线衍射仪（XRD）、扫描电子显微镜（SEM）、透射电子显微镜（TEM）、X射线能谱仪（EDS）和矢量网络分析仪（VNA）等对复合纤维的晶体结构、微观形貌和电磁性能进行了表征,研究了不同软硬磁质量比对纤维结构和性能的影响。结果表明：900℃下制备的复合纤维具有立体多孔结构,软硬磁质量比为1∶3时,复合纤维的比表面积达到55 m²·g^-1。吸波性能测试结果显示,当吸波剂涂层厚度为3.5 mm时,复合纤维在10.6 GHz处反射损失（R_L）值达到-31.9 dB,在2~18 GHz频率范围内,R_L值小于-10 dB的吸收带宽达到10.5 GHz,覆盖了整个X波段（8.2~12.4 GHz）和Ku波段（12.4~18 GHz）,显示出优异的宽波段吸收性能。     

LiCoO2梯度包覆LiNi0.96Co0.04O2电极材料的电化学性能

镍钴酸锂(LiNi0.8Co0.2O2)与目前商业用锂离子电池正极材料钴酸锂(LiCoO2)相比,具有成本低、实际比容量高和环境友好等优势。但LiNi0.8Co0.2O2的充放循环性能还有待提高,对其进行阳离子掺杂或表面修饰可以改善其电化学性能,这方面的研究已经成为热点。Fey等人[1]用溶胶凝胶法制     

Preparation of ZrO2-TiO2-CeO2 and Its Application in the Selective Catalytic Reduction of NO with NH3

TiO₂,ZrO₂-TiO₂,andZrO₂-TiO₂-CeO₂ were prepared by co-precipitation method and characterized by X-ray diffraction (XRD), specific surface area measurements (BET), temperature programmed desorption (NH₃-TPD), oxygen storage capacity (OSC), and temperature programmed reduction (H₂-TPR). The results showed that ZrO₂-TiO₂-CeO₂ exhibited large number of surface strong acid, possessed some oxygen storage capacity, and strong redox property. The three materials were used as supports and the monolith catalysts were prepared with 1% (w) V₂O₅ and 9% (w)WO₃ for selective catalytic reduction (SCR) of NO with ammonia in the presence of excessive O₂, and the results of catalytic activity showed that the catalyst used ZrO₂-TiO₂-CeO₂ as support yielded nearly 100% NO conversion at 275 °C at a gas hourly space velocity (GHSV) of 10000 h⁻¹, and it had the best catalytic activity and showed great potential for practical application.     

Synthesis and properties of the double perovskites La2NiVO6, La2CoVO6, and La2CoTiO6

The double perovskites La₂CoVO₆, La₂CoTiO₆, and La₂NiVO₆, are described. Rietveld fitting of neutron and powder X-ray diffraction data show La₂NiVO₆ and La₂CoVO₆ to have a disordered arrangement of B-cations whereas La₂CoTiO₆ shows ordering of the B-cations (with ∼5% Co/Ti inversion). Curie-Weiss fits to the linear region of the 1/χ plots reveal Weiss temperatures of −107, −34.8, and 16.3 K for La₂CoVO₆, La₂CoTiO₆, and La₂NiVO₆, respectively, and magnetic transitions are observed. La₂CoTiO₆ prepared by our method differs from material prepared by lower-temperature routes. A simple antiferromagnetic spin model is consistent with the data for La₂CoTiO₆. These compounds are semiconductors with bandgaps of 0.41 (La₂CoVO₆), 1.02 (La₂CoTiO₆) and 0.45 eV (La₂NiVO₆).     

WS2/CuGa2O4复合材料的制备及其气敏性

采用共沉淀法制备了CuGa₂O₄纳米材料,并利用水热法制备了一系列WS₂/CuGa₂O₄复合材料。结合X射线衍射(XRD)、扫描电子显微镜(SEM)、X射线光电子能谱(XPS)等对制备的材料进行了物相组成、表面形貌以及元素价态的分析。研究了WS₂的复合量对CuGa₂O₄材料检测乙醇气体敏感性能的影响。实验结果表明,当WS₂与CuGa₂O₄质量比为1%时,该复合材料制备的传感器在室温下对100μL·L^-1乙醇气体表现出345.3的灵敏度,响应时间和恢复时间分别为184和69 s,且最低检测限为0.1μL·L^-1。     

Transport and optical properties of heavily hole-doped semiconductors BaCu2Se2 and BaCu2Te2

Experimental and theoretical studies of the electronic and optical properties of orthorhombic BaCu₂Se₂ and BaCu₂Te₂ are reported. Experimental data include the electrical resistivity, Hall coefficient, Seebeck coefficient, thermal conductivity, and lattice constants for , and optical transmission and diffuse reflectance data at room temperature. Nominally stoichiometric, polycrystalline samples form with hole concentrations inferred from Hall measurements of 2×10¹⁸ and 5×10¹⁹ cm⁻³ near room temperature for the selenide and telluride, respectively. The corresponding mobilities are near 15 cm² V⁻¹ s⁻¹ for both materials. Optical measurements reveal a transition near 1.8 eV in BaCu₂Se₂, while no similar feature was observed for BaCu₂Te₂. First principles calculations indicate both materials are direct or nearly direct gap semiconductors with calculated gaps near 1.0 eV and 1.3 eV for the telluride and selenide, respectively, and predict weak absorption below about 2 eV. Transport properties calculated from the electronic structure are also presented.     

Conversion of NO in NO/N2, NO/O2/N2, NO/C2H4/N2 and NO/C2H4/O2/N2 Systems by Dielectric Barrier Discharge Plasmas

An experimental study on the conversion of NO in the NO/N₂, NO/O₂/N₂, NO/C₂H₄/N₂ and NO/C₂H₄/O₂/N₂ systems has been carried out using dielectric barrier discharge (DBD) plasmas at atmospheric pressure. In the NO/N₂ system, NO decomposition to N₂ and O₂ is the dominating reaction; NO conversion to NO₂ is less significant. O₂ produced from NO decomposition was detected by an on-line mass spectrometer. With the increase of NO initial concentration, the concentration of O₂ produced decreases at 298 K, but slightly increases at 523 K. In the NO/O₂/N₂ system, NO is mainly oxidized to NO₂, but NO conversion becomes very low at 523 K and over 1.6% of O₂. In the NO/C₂H₄/N₂ system, NO is reduced to N₂ with about the same NO conversion as that in the NO/N₂ system but without NO₂ formation. In the NO/C₂H₄/O₂/N₂ system, the oxidation of NO to NO₂ is dramatically promoted. At 523 K, with the increase of the energy density, NO conversion increases rapidly first, and then almost stabilizes at 93–91% of NO conversion with 61–55% of NO₂ selectivity in the energy density range of 317–550 J L⁻¹. It finally decreases gradually at high energy density. A negligible amount of N₂O is formed in the above four systems. Of the four systems studied, NO conversion and NO₂ selectivity of the NO/C₂H₄/O₂/N₂ system are the highest, and NO/O₂/C₂H₄/N₂ system has the lowest electrical energy consumption per NO molecule converted.     

Cr2(WO4)3和Cr2(MoO4)3的负热膨胀特性研究

用液相反应-前驱物烧结法制备了Cr₂(WO₄)₃和Cr₂(MoO₄)₃粉体。298～1 073 K的原位粉末X射线衍射数据表明Cr₂(WO₄)₃和Cr₂(MoO₄)₃的晶胞体积随温度的升高而增大, 本征线热膨胀系数分别为(1.274±0.003)×10^-6 K^-1和(1.612±0.003)×10^-6 K^-1。用热膨胀仪研究了Cr₂(WO₄)₃和Cr₂(MoO₄)₃在静态空气中298～1 073 K范围内热膨胀行为，即开始表现为正热膨胀，随后在相转变点达到最大值，最后表现为负热膨胀，其负热膨胀系数分别为(-7.033±0.014)×10^-6 K^-1和(-9.282±0.019)×10^-6 K^-1。     

CeO2改性Ag-V2O5/TiO2催化剂的甲基吡啶氧化脱甲基性能

以锐钛矿TiO_2为载体,考察了CeO_2改性对Ag-CeO_2-V_2O_5/TiO_2催化3-甲基吡啶氧化脱甲基性能的影响,并优化了催化剂组成与制备条件.结果表明:Ce掺杂改性不仅能够与V物种作用形成Ce VO_4,而且促进V_2O_5分散,改善活性组分的氧化还原性能,从而提高3-甲基吡啶脱甲基转化率与选择性,改善Ag-V_2O_5/TiO_2催化性能.适宜的催化剂组成为V_2O_5负载量15%,Ce/V的摩尔比0.33,Ag质量分数1.0%.过高的焙烧温度将导致TiO_2载体向金红石型转变,Ag-CeO_2-V_2O_5/TiO_2适宜制备条件为450℃焙烧4 h.     

Why pressure induces an abrupt structural rearrangement in PdTe2 but not in PtTe2

High-pressure X-ray diffraction measurements were carried out for polymeric CdI₂-type compounds MTe₂ (M=Pt, Pd) to investigate if they undergo a structural phase transition under pressure as does IrTe₂. Up to 27 GPa at room temperature PtTe₂ does not undergo any structural phase transition. In contrast, however, an abrupt change in the inter-atomic distances occurs in PdTe₂ above 15.7 GPa at room temperature, and above 5 GPa at 300 °C, but the volume vs. pressure curve exhibits no discontinuity. To account for the differences between the isostructural compounds PtTe₂, PdTe₂ and IrTe₂, their electronic structures and bonding were analyzed on the basis of first principles electronic band structure calculations.     

Energetics of copper diphosphates – Cu2P2O7 and Cu3(P2O6OH)2

Differential scanning calorimetry and high temperature oxide melt solution calorimetry are used to study enthalpy of phase transition and enthalpies of formation of Cu₂P₂O₇ and Cu₃(P₂O₆OH)₂. α-Cu₂P₂O₇ is reversibly transformed to β-Cu₂P₂O₇ at 338–363 K with an enthalpy of phase transition of 0.15 ± 0.03 kJ mol⁻¹. Enthalpies of formation from oxides of α-Cu₂P₂O₇ and Cu₃(P₂O₆OH)₂ are −279.0 ± 1.4 kJ mol⁻¹ and −538.8 ± 2.7 kJ mol⁻¹, and their standard enthalpies of formation (enthalpy of formation from elements) are −2096.1 ± 4.3 kJ mol⁻¹ and −4302.7 ± 6.7 kJ mol⁻¹, respectively. The presence of hydrogen in diphosphate groups changes the geometry of Cu(II) and decreases acid–base interaction between oxide components in Cu₃(P₂O₆OH)₂, thus decreasing its thermodynamic stability.