Chloro-Modified Magnetic Fe3O4@MCM-41 Core–Shell Nanoparticles for L-Asparaginase Immobilization with Improved Catalytic Activity,Reusability, and Storage Stability

This paper describes a new support that permits to efficient immobilization of L-asparaginase (L-ASNase). For this purpose, Fe₃O₄ magnetic nanoparticles were synthesized and coated by MCM-41. 3-chloropropyltrimethoxysilane (CPTMS) was used as a surface modifying agent for covalent immobilization of L-ASNase on the magnetic nanoparticles. The chemical structure; thermal, morphological, and magnetic properties; chemical composition; and zeta potential value of Fe₃O₄@MCM-41-Cl were characterized by Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), differential thermal analysis (DTA), differential scanning calorimetry (DSC), vibrating sample magnetometer (VSM), scanning electron microscope (SEM), energy dispersive X-ray (EDX), X-ray diffraction patterns (XRD), and zeta-potential measurement. The immobilization efficiency onto Fe₃O₄@MCM-41-Cl was detected as 63%. The reusability, storage, pH, and thermal stabilities of the immobilized L-ASNase were investigated and compared to that of soluble one. The immobilized enzyme maintained 42.2% of its original activity after 18 cycles of reuse. Furthermore, it was more stable towards pH and temperature compared with soluble enzyme. The Michaelis–Menten kinetic properties of immobilized L-ASNase showed a lower V_max and a similar K_m compared to soluble L-ASNase. Immobilized enzyme had around 47 and 32.5% residual activity upon storage a period of 28 days at 4 and 25 °C, respectively. In conclusion, the Fe₃O₄@MCM-41-Cl@L-ASNase core–shell nanoparticles could successfully be used in industrial and medical applications.

     

Synthesis of a highly active amino‐functionalized Fe3O4@SiO2/APTS/Ru magnetic nanocomposite catalyst for hydrogenation reactions

An amino‐functionalized silica‐coated Fe₃O₄ nanocomposite (Fe₃O₄@SiO₂/APTS) was synthesized. The Fe₃O₄@SiO₂ microspheres possessed a well‐defined core–shell structure, uniform sizes and high magnetization. An immobilized ruthenium nanoparticle catalyst (Fe₃O₄@SiO₂/APTS/Ru) was obtained after coordination and reduction of Ru³⁺ on the Fe₃O₄@SiO₂/APTS nanocomposite. The Ru nanoparticles were not only ultra‐small with nearly monodisperse sizes but also had strong affinity with the surface of Fe₃O₄@SiO₂/APTS. The obtained catalyst exhibited excellent catalytic performance for the hydrogenation of a variety of aromatic nitro compounds, even at room temperature. Moreover, Fe₃O₄@SiO₂/APTS/Ru was easily recovered using a magnetic field and directly reused for at least five cycles without significant loss of its activity.     

Matrices based on meso antibacterial framework

In this paper, the synthesis of three types of porous materials (PMs) (porous Fe₃O₄, MIL-101 metal-organic framework (MOF), and MCM-41 mesoporous silica) by hydrothermal method was performed. The incorporation of Ag nanoparticles (Ag NPs) was carried out after the synthesis reaction of supports in MCM-41 and MIL-101 MOF. Ag core@ porous Fe₃O₄ core–shell system was prepared via a one-pot hydrothermal method. Ag-MIL-101 was obtained using Urtica dioica leaf extract as the green solvent and reducing agent. The antibacterial activity of Ag-PM nanocomposites (NCs) was investigated on both Gram-negative and Gram-positive bacteria. The size of the silver NPs was determined to be 12 and 30 nm in MCM-41 and MIL-101 MOF, respectively. The diameter of Ag core in Ag@Fe₃O₄ shell was ~135 nm. The antibacterial activity of Ag-PMs was in the order Ag-MCM-41 > Ag-MIL-101 > Ag core@Fe₃O₄ shell. The loading percent of Ag NPs in MCM-41 (84%) was more than that in MIL-101 (53%) and Fe₃O₄ (31%). The release of Ag⁺ ions from Ag-MCM-41, Ag-MIL-101, and Ag@Fe₃O₄ NCs was 46, 2, and 1 ppm, respectively. The release of the Ag⁺ ions and, consequently, the antibacterial activity of NCs depend on the uniform distribution, particles size, and the absence of aggregation of Ag NPs in PMs.     

Preparation and characterization of flexible polyurethane foam nanocomposites reinforced by magnetic core-shell Fe3O4@APTS nanoparticles

Novel magnetic polyurethane flexible foam nanocomposites were synthesized by incorporation of aminopropyltriethoxysilane (APTS) functionalized magnetite nanoparticles (MNPs) via one-shot method. The functionalized MNPs (Fe₃O₄@APTS) were synthesized by co-precipitation of the Fe²⁺ and Fe³⁺ with NH₄OH and further functionalization with APTS onto the surface of MNPs by sol–gel method. The magnetic core-shell NPs were used up to 3.0 % in the foam formulation and the magnetic nanocomposites prepared successfully. The results of thermogravimetric analysis (TGA) showed an increasing in thermal stability of polyurethane nanocomposite foam at initial, 5 and 10 %, and maximum thermal decomposition temperatures by incorporation of Fe₃O₄@APTS. In addition SEM images revealed the uniformity of the foam structures and decreasing in pore sizes. Furthermore, VSM result showed super paramagnetic behavior for Fe₃O₄@APTS-PU nanocomposites.     

Magnetically recoverable facile nanomaterials: Synthesis, characterization and application in remediation of heavy metals

The present work reports a facile route for ethylenediaminetetraacetic acid (EDTA) immobilization on the surface of amine-terminated Fe₃O₄ nanoparticles for remediation of heavy metals from aqueous solutions. Transmission electron microscopy images showed both Fe₃O₄–NH₂ and Fe₃O₄–NH₂/PEI-EDTA magnetic nanoparticles with an average diameter of 60 nm. The FT-IR study confirmed the chemical covalent modification of EDTA on the surface of amine-terminated magnetite nanoparticles. XRD analysis demonstrated that the magnetic nanoparticles had a high crystallinity before and after modification. Magnetic measurements indicated that these nanoparticles could be easily removed through external magnetic force. The research work on the adsorption revealed that the concentration of Pb²⁺ altered from 10 to 0.12 mg/L and it indicated that 98.8% of Pb²⁺ could be removed from aqueous solutions at pH 5.05, and Fe₃O₄–NH₂/PEI-EDTA loaded heavy metal ions after being treated with 0.1 M HCl could be used as a reusable nano-adsorbent.     

Towards site-specific nanoparticles for drug delivery application: preparation,characterization and release performance

Due to the uncontrollable drug release, traditional chemotherapies could cause great side-effects and are detrimental to normal tissue or organs. Therefore, to avoid those side-effects, drug delivery system (DDS) which is capable of releasing drug molecules at target area with controllable rate according to the development of the disease or to certain functions of the organism/biological rhythm, has attracted especially focus in recent years. In this research, we devoted our efforts in constructing a core–shell nanocomposite to meet the above requirements. The superparamagnetic Fe₃O₄ nanoparticles were chosen as the core to introduce the magnetic guiding as well as site-specific properties in this novel drug carrier. The core was further encapsulated by silica-based molecular sieve MCM-41 (briefly denoted as MS in this research), which was consisted by immense highly ordered hexagonal tunnels to offer plenty cavity for molecules of drug. A light stimuli-responsive ligand, which is a derivative from light-responsive precursor 4,5-diazafluoren-9-one (indicated in the paper as DAFO), was further connected to the MCM-41 tunnels. The ligand can be excited by light and will flip over, making the tunnels of MCM-41 switch from close to open with light on and light off. The nanocomposite thus became capable of releasing drug molecules at certain wavelength of light. In the final, the nanoparticles were tested via SEM/TEM, XRD, FT-IR spectra, thermogravimetry and N₂ adsorption/desorption to verify the structure. The MTT testing of our nanocomposite reveals no obvious cytotoxicity with non-morbid L929 murine fibroblast cells line, indicating that it could be used as a DDS candidate. The cargo releasing behaviors were studied on cytarabine loaded composite: DAFO@MS@Fe₃O₄ in simulated body fluids.     

Improving Pullulanase Catalysis via Reversible Immobilization on Modified Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>@Polydopamine Nanoparticles

To improve the catalysis of pullulanase from Anoxybacillus sp.WB42, Fe₃O₄@polydopamine nanoparticles (Fe₃O₄@PDA) were prepared and modified with functional groups for immobilization of pullulanases via covalent binding or ionic adsorption. Immobilized pullulanases had lower thermal stability than that of free pullulanase, whereas their catalysis depended on the surface characteristics of nanoparticles. As for covalent immobilization of pullulanases onto Fe₃O₄@PDA derivatives, the spacer grafted onto Fe₃O₄@PDA made the catalytic efficiency of pullulanase increase up to the equivalence of free enzyme but dramatically reduced the pullulanase thermostability. In contrast, pullulanases bounded ionically to Fe₃O₄@PDA derivatives had higher activity recovery and catalytic efficiency, and their catalytic behaviors varied with the modifier grafted onto Fe₃O₄@PDA. Among these immobilized pullulanases, ionic adsorption of pullulanase on Fe₃O₄@PDA-polyethyleneimine-glycidyltrimethylammonium gave a high-performance and durable catalyst, which displayed not only 1.5-fold increase in catalytic efficiency compared to free enzyme but also a significant improvement in operation stability with a half of initial activity after 27 consecutive cycles with a total reaction time of 13.5 h, and was reversible, making this nanoparticle reusable for immobilization.     

磁性壳聚糖/Fe3O4/氧化石墨烯吸附剂的制备及其多染料吸附性能

为了提高壳聚糖的多染料吸附性能并使其便于固液分离,采用共沉淀法制备了壳聚糖、磁铁矿纳米颗粒、氧化石墨烯复合磁性吸附剂(CS/Fe₃O₄/GO)。系统的结构表征显示,CS包覆的Fe₃O₄磁性纳米颗粒均匀地分布在GO的表面。CS/Fe₃O₄/GO具有高达42.5 emu·g^-1的室温铁磁性,因此可在外加磁场中实现高效固液分离。研究表明,CS/Fe₃O₄/GO对亚甲基蓝(MB)、甲基橙(MO)和刚果红(CR)等多种染料具有良好的吸附性能,溶液的pH、初始浓度和吸附时间对其多染料吸附性能具有显著影响。在最佳条件下,CS/Fe₃O₄/GO对MB、MO和CR的吸附量分别达到210.6、258.6和308.9 mg·g^-1。CS/Fe₃O₄/GO具有优异的循环利用性能,经5次循环后仍能保留90%以上的原始吸附量。采用吸附等温线和吸附动力学对CS/Fe₃O₄/GO的多染料吸附性能进行了拟合分析,并详细讨论了其吸附机理。     

Enhancing of asphaltene adsorption onto Fe3O4 nanoparticles coated with metal-organic framework Mil-101 (Cr) for the inhibition of asphaltene precipitation

In this study, the potential of MOF (Mil-101-Cr)-coated Fe₃O₄ magnetic nanoparticles (Fe₃O₄-MOF MNPs) for asphaltene adsorption was investigated for the first time and the results were compared with magnetic Fe₃O₄ nanoparticles (Fe₃O₄ MNPs). The coprecipitation method was used for the synthesis of both nanoparticles and were verified using x-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), and field emission scanning electron microscopy (FE-SEM). The initial asphaltene concentration, nanoparticles concentration, and temperature were the investigated parameters that influenced the adsorption capacity. Increasing the asphaltene concentration, decreasing the mass of nanoparticles, and reducing the temperature could enhance the maximum asphaltene adsorption capacities of 0.79 for Fe₃O₄ MNPs and 0.98?mg?m^?2 for Fe₃O₄-MOF MNPs. Adsorption isotherms tests showed that the Langmuir model was in agreement with the experimental data. In addition, the evaluation of adsorption kinetics demonstrated that the pseudo-second-order Lagergren model predicted the results more precisely. The amount of asphaltene adsorption for Fe₃O₄-MOF MNPs was higher than that for Fe₃O₄ MNPs. These results recommend the application of MOF as an appropriate and effective coating for enhancing asphaltene adsorption.     

可循环磁性Pt/Fe3O4-MCNT催化剂上的肉桂醛选择性加氢反应

采用多步法依次将制备的Fe₃O₄纳米颗粒和Pt纳米颗粒负载到多壁碳纳米管(MCNT)上得到Pt/Fe₃O₄-MCNT磁性催化剂,以X射线衍射(XRD)、透射电镜(TEM)、超导量子干涉磁强计(SQUID)和热重-差热分析(TG-DTA)对Pt/Fe₃O₄-MCNT磁性催化剂的结构和磁性质进行了表征。研究发现预制备的Fe₃O₄纳米颗粒与Pt纳米颗粒均匀地分散于MCNT上,新制备以及多次使用后的Pt/Fe₃O₄-MCNT室温下都具有良好的超顺磁性。研究了Pt/Fe₃O₄-MCNT磁性催化剂上的肉桂醛选择性加氢反应,结果显示催化剂具有良好的C=O加氢活性,肉桂醛转化率在50%左右时,肉桂醇选择性可达96%以上。尺寸均一的Pt粒子均匀的分散在催化剂上可能是催化剂具有良好的C=O加氢选择性的重要原因。在外加磁场作用下催化剂可以高效地从液相反应体系中分离,经多次循环使用后仍具有良好的催化性能。     

Equilibrium and kinetic study of novel methyltrimethoxysilane magnetic titanium dioxide nanocomposite for methylene blue adsorption from aqueous media

Novel magnetic titanium dioxide nanoparticles decorated with methyltrimethoxysilane (Fe₃O₄@TiO₂‐MTMOS) were successfully fabricated via a sol–gel method at room temperature. The synthesized material was characterized using Fourier transform infrared spectroscopy, X‐ray diffraction, scanning electron microscopy, energy‐dispersive X‐ray spectroscopy, thermogravimetric analysis and vibrating sample magnetometry. The removal efficiency of the adsorbent was evaluated through the adsorption of methylene blue (MB) dye from water samples. The adsorption isotherm and kinetics were evaluated using various models. The Langmuir model indicated a high adsorption capacity (11.5 mg g^?1) of Fe₃O₄@TiO₂‐MTMOS. The nanocomposite exhibited high removal efficiency (96%) and good regeneration (10 times) compared to Fe₃O₄ and Fe₃O₄@TiO₂ at pH = 9.0. Based on the adsorption mechanism, electrostatic interaction plays a main role in adsorption since MB dye is cationic in nature at pH = 9, whereas the adsorbent acquired an anionic nature. The newly synthesized Fe₃O₄@TiO₂‐MTMOS can be used as a promising material for efficient removal of MB dye from aqueous media.     

Adsorption of Crystal Violet Dye Using Activated Carbon of Lemon Wood and Activated Carbon/Fe3O4 Magnetic Nanocomposite from Aqueous Solutions: A Kinetic,Equilibrium and Thermodynamic Study

Activated carbon prepared from lemon (Citrus limon) wood (ACL) and ACL/Fe₃O₄ magnetic nanocomposite were effectively used to remove the cationic dye of crystal violet (CV) from aqueous solutions. The results showed that Fe₃O₄ nanoparticles were successfully placed in the structure of ACL and the produced nanocomposites showed superior magnetic properties. It was found that pH was the most effective parameter in the CV dye adsorption and pH of 9 gave the maximum adsorption efficiency of 93.5% and 98.3% for ACL and ACL/Fe₃O₄, respectively. The Dubinin–Radushkevich (D-R) and Langmuir models were selected to investigate the CV dye adsorption equilibrium behavior for ACL and ACL/Fe₃O₄, respectively. A maximum adsorption capacity of 23.6 and 35.3 mg/g was obtained for ACL and ACL/Fe₃O₄, respectively indicating superior adsorption capacity of Fe₃O₄ nanoparticles. The kinetic data of the adsorption process followed the pseudo-second order (PSO) kinetic model, indicating that chemical mechanisms may have an effect on the CV dye adsorption. The negative values obtained for Gibb’s free energy parameter (−20 < ΔG < 0 kJ/mol) showed that the adsorption process using both types of the adsorbents was physical. Moreover, the CV dye adsorption enthalpy (ΔH) values of −45.4 for ACL and −56.9 kJ/mol for ACL/Fe₃O₄ were obtained indicating that the adsorption process was exothermic. Overall, ACL and ACL/Fe₃O₄ magnetic nanocomposites provide a novel and effective type of adsorbents to remove CV dye from the aqueous solutions.     

磁性壳聚糖/Fe3O4/氧化石墨烯吸附剂的制备及其多染料吸附性能

为了提高壳聚糖的多染料吸附性能并使其便于固液分离,采用共沉淀法制备了壳聚糖、磁铁矿纳米颗粒、氧化石墨烯复合磁性吸附剂(CS/Fe₃O₄/GO)。系统的结构表征显示,CS包覆的Fe₃O₄磁性纳米颗粒均匀地分布在GO的表面。CS/Fe₃O₄/GO具有高达42.5 emu·g-1的室温铁磁性,因此可在外加磁场中实现高效固液分离。研究表明,CS/Fe₃O₄/GO对亚甲基蓝(MB)、甲基橙(MO)和刚果红(CR)等多种染料具有良好的吸附性能,溶液的pH、初始浓度和吸附时间对其多染料吸附性能具有显著影响。在最佳条件下,CS/Fe₃O₄/GO对MB、MO和CR的吸附量分别达到210.6、258.6和308.9 mg·g-1。CS/Fe₃O₄/GO具有优异的循环利用性能,经5次循环后仍能保留90%以上的原始吸附量。采用吸附等温线和吸附动力学对...     

Magnetite nanoparticles for removal of heavy metals from aqueous solutions: synthesis and characterization

Fe₃O₄ magnetic nanoparticles were synthesized by co-precipitation method. The structural characterization showed an average nanoparticle size of 8 nm. The synthesized Fe₃O₄ nanoparticles were tested for the treatment of synthetic aqueous solutions contaminated by metal ions, i.e. Pb(II), Cu(II), Zn(II) and Mn(II). Experimental results show that the adsorption capacity of Fe₃O₄ nanoparticles is maximum for Pb(II) and minimum for Mn(II), likely due to a different electrostatic attraction between heavy metal cations and negatively charged adsorption sites, mainly related to the hydrated ionic radii of the investigated heavy metals. Various factors influencing the adsorption of metal ions, e.g., pH, temperature, and contacting time were investigated to optimize the operating condition for the use of Fe₃O₄ nanoparticles as adsorbent. The experimental results indicated that the adsorption is strongly influenced by pH and temperature, the effect depending on the different metal ion considered.     

可循环磁性Pt/Fe_3O_4-MCNT催化剂上的肉桂醛选择性加氢反应

采用多步法依次将制备的Fe3O4纳米颗粒和Pt纳米颗粒负载到多壁碳纳米管(MCNT)上得到Pt/Fe3O4-MCNT磁性催化剂,以X射线衍射(XRD)、透射电镜(TEM)、超导量子干涉磁强计(SQUID)和热重-差热分析(TG-DTA)对Pt/Fe3O4-MCNT磁性催化剂的结构和磁性质进行了表征。研究发现预制备的Fe3O4纳米颗粒与Pt纳米颗粒均匀地分散于MCNT上,新制备以及多次使用后的Pt/Fe3O4-MCNT室温下都具有良好的超顺磁性。研究了Pt/Fe3O4-MCNT磁性催化剂上的肉桂醛选择性加氢反应,结果显示催化剂具有良好的C=O加氢活性,肉桂醛转化率在50%左右时,肉桂醇选择性可达96%以上。尺寸均一的Pt粒子均匀的分散在催化剂上可能是催化剂具有良好的C=O加氢选择性的重要原因。在外加磁场作用下催化剂可以高效地从液相反应体系中分离,经多次循环使用后仍具有良好的催化性能。     

Synthesis, structure and magnetic properties of porous magnetic composite, based on MCM-41 molecular sieve with Fe3O4 nanoparticles

Porous magnetic composites were prepared by the synthesis of molecular sieve MCM-41 in the presence of Fe₃O₄ nanoparticles with average diameter of 15 nm. Nanoparticles were captured by porous silica matrix MCM-41, which resulted in their incorporation, as it was confirmed by TEM, SEM and X-ray diffraction. The materials possessed high surface area (392-666 m² g⁻¹), high pore volume (0.39-0.73 cm³ g⁻¹) along with high magnetic response (M_S up to 28.4 emu g⁻¹ at 300 K). Calcination of samples resulted in partial oxidation of Fe₃O₄ to α-Fe₂O₃. The influence of nanoparticles content on sorption and magnetic properties of the composites was shown. No hysteresis was found for the samples at 300 K; at 5 K, H_C was in the range 370-385 G for non-calcinated samples and 350-356 G for calcinated ones.     

Adsorption of asphaltene from crude oil by applying polythiophene coating on Fe3O4 nanoparticles

The objective of the present study was to investigate the potential use of applying polythiophene coating on magnetic Fe₃O₄ nanoparticles for the enhancement of asphaltene adsorption. Two stages of experimental were conducted. In the first stage, the ability of coated nanoparticles for asphaltene adsorption in synthetic asphaltene-toluene solution was evaluated. The effects of parameters such as nanoparticles concentration, initial concentration of asphaltene, and temperature were studied. In the second stage, the performance of the coated nanoparticles for the adsorption of asphaltene from crude oil was investigated under atmospheric pressure and a pressure-volume-temperature (PVT) apparatus was utilized for simulated reservoir conditions. Fe₃O₄ and Fe₃O₄-PT MNPs were synthesized using an effective co-precipitation method. The results of the first-stage tests indicated that the maximum adsorption capacity values for Fe₃O₄ and Fe₃O₄-PT MNPs were 0.79 and 1.09?mg?m^?2, respectively. The optimum value of nanoparticles concentration was approximately determined as 10?g?L^?1. According to the adsorption isotherms and kinetics, the Langmuir and pseudo-second-order Lagergren models were consistent with the experimental data, respectively. The average adsorption efficiencies for Fe₃O₄-PT and Fe₃O₄ MNPs were 78.98 and 65.94%, respectively. The results of the performed experiments on crude oil showed that Fe₃O₄-PT MNPs could adsorb asphaltenes from crude oil in a similar trend as synthetic asphaltene-toluene solution.     

Iron oxide nanoparticles coated with green tea extract as a novel magnetite reductant and stabilizer sorbent for silver ions: Synthetic application of Fe3O4@green tea/Ag nanoparticles as magnetically separable and reusable nanocatalyst for reduction of 4‐nitrophenol

Green tea extract having many phenolic hydroxyl and carbonyl functional groups in its molecular framework can be used in the modification of Fe₃O₄ nanoparticles. Moreover, the feasibility of complexation of polyphenols with silver ions in aqueous solution can improve the surface properties and capacity of the Fe₃O₄@green tea extract nanoparticles (Fe₃O₄@GTE NPs) for sorption and reduction of silver ions. Therefore, the novel Fe₃O₄@GTE NPs nano‐sorbent has potential ability as both reducing and stabilizing agent for immobilization of silver nanoparticles to make a novel magnetic silver nanocatalyst (Fe₃O₄@GTE/Ag NPs). Inductively coupled plasma analysis, transmission and scanning electron microscopies, energy‐dispersive X‐ray and Fourier transform infrared spectroscopies, and vibrating sample magnetometry were used to characterize the catalyst. Fe₃O₄@GTE/Ag NPs shows high catalytic activity as a recyclable nanocatalyst for the reduction of 4‐nitrophenol at room temperature.     

Preparation of a novel Fe3O4/graphene oxide hybrid for adsorptive removal of methylene blue from water

In this work, a novel Fe₃O₄/graphene oxide (GO) hybrid was prepared and its removal ability of cationic methylene blue dye from water was investigated. To improve the dispersability of Fe₃O₄/GO hybrid in water, GO was first modified by polyethylene glycol (PEG) via a click approach before deposition of Fe₃O₄ nanoparticles onto its surface. The successful modification of GO surface and the deposition of Fe₃O₄ nanoparticles were confirmed by transmission electron microscopy directly. The saturation magnetization of the resultant Fe₃O₄/GO hybrid is 7.8 eum/g. The adsorption capacities of Fe₃O₄/GO hybrid for methylene blue at 35 and 60°C were as high as 96.05 and 120.05 mg/g, respectively. Moreover, the Langmuir, Freundlich, and Temkin models are used to investigate the isothermal adsorption behavior of Fe₃O₄/GO hybrid.     

Easily prepared and stable functionalized magnetic ordered mesoporous silica for efficient uranium extraction

Functionalized magnetic Fe_3O_4@SiO_2 composite nanoparticles were prepared by simply embedding iron oxide nanoparticles into MCM-41 through one-step synthesis process, followed by aminopropyls grafting on the mesopore channels, aiming to efficiently and conveniently uptake U(VI) from aqueous solution. The resultant material possesses highly ordered mesoporous structure with large surface area, uniform pore size, excellent thermal stability, quick magnetic response, and desirable acids resistance, confirmed by Fourier transform infrared spectroscopy(FTIR), scanning electron microscopy(SEM), N_2 adsorption/desorption experiments, powder X-ray diffraction(PXRD), and thermogravimetric analysis(TGA). Detailed U(VI) sorption test indicated that this material is indeed an effective U(VI) sorbent with fast sorption kinetics of less than 2 h, large sorption capacity of 160 mg/g at p H 5.0±0.1, and desirable selectivity towards U(VI) ions over a range of competing metal ions. The absorbed U(VI) can be easily desorbed by 0.01 mol/L or more concentrated HNO_3 solution, and the reclaimed sorbent can be reused with no obvious decrease of sorption capacity even after 4 sorption-desorption cycles. The present results suggest the vast opportunities of this kind of magnetic composite on the solid-phase extraction of U(VI).