3-Cyclobutenyl-1,2-dione-substituted porphyrins. A general and efficient entry to porphyrin-quinone and quinone-porphyrin-quinone architectures

A new and efficient synthesis of meso-linked porphyrin-quinone dyads and quinone-porphyrin-quinone triads has been developed via the intermediacy of porphyrins bearing 3-cyclobutenyl-1,2-dione and 3-(1-ethenyl)cyclobutenyl-1,2-dione substituents at one or two nonadjacent meso-positions. The free-base porphyrins 5-bromo-10,20-diphenylporphyrin and 5,15-dibromo-10,20-diphenylporphyrin undergo facile palladium-catalyzed Stille coupling with 3-isopropoxy-2-tri-n-butylstannyl-cyclobutene-1,2-dione to produce the corresponding mono- and bis(3-cyclobutenyl-1,2-dione)-substituted porphyrins in good yields. In contrast, the zinc bromoporphyrins reacted with the same tin reagent only slowly and with the formation of side products. The free-base bromoporphyrins also were coupled with tri-n-butylvinyltin to afford vinylporphyrins in very good yields. 5,15-Diphenyl-10-vinylporphyrin was converted into trans-bromovinylporphyrin, which underwent facile Stille coupling with 3-isopropoxy-2-tri-n-butylstannylcyclobutene-1,2-dione to afford the vinylogous 3-cyclobutenyl-1,2-dione-substituted porphyrin. The molecular structure of 5,15-bis(3-cyclobutenyl-1,2-dione)-10,20-diphenylporphyrin(Z n) was determined by X-ray crystallography. Although the data revealed a fairly large dihedral angle between the cyclobutenedione and the porphyrin rings (57 degrees), the UV-vis spectra of both the mono- and bis(3-cyclobutenyl-1,2-dione)-substituted porphyrins showed B- and Q-band red shifts indicative of strong electronic coupling between the porphyrin and cyclobutenedione chromophores in solution. Introduction of a double bond between the cyclobutenedione and porphyrin rings resulted in a significant red shift of both the B- and Q-bands compared to those of the nonvinylogous system. All porphyrinic cyclobutenediones were metalated with zinc and then, using established cyclobutenedione chemistry, converted into a variety of porphyrin-quinones in excellent yields with aryllithium and vinylic Grignard reagents. From the mono(3-cyclobutenyl-1,2-dione)-substituted porphyrin, 7, a variety of directly linked monoquinone-porphyrin dyads were easily synthesized. Substituents could also be introduced at the free meso-position of 7 by bromination followed by palladium-catalyzed cross-coupling reactions, and additional porphyrinic monoquinones were then prepared from these starting materials. The vinylogous squarylporphyrin was converted into a double bond linked porphyrin-quinone via reaction with phenyllithium followed by thermal rearrangement and oxidation. As a result of the hindered rotation around the C-C bond between the porphyrin and the quinone, pairs of stable, separable, and thermally interconvertable atropisomers of porphyrin-quinones were obtained from 5,15-bis(3-cyclobutenyl-1,2-dione)-10,20-diphenylporphyrin(Z n). The structure of one of the atropisomers was determined by X-ray crystallography.     

Decoupling optical and potentiometric band gaps in pi-conjugated materials

Syntheses, optical spectroscopy, potentiometric studies, and electronic structural calculations are reported for two classes of conjugated (porphinato)metal oligomers that feature a meso-to-meso ethyne-bridged linkage topology. One set of these systems, bis[(5,5'-10,20-bis[3,5-bis(3,3-dimethyl-1-butyloxy)phenyl]porphinato)zinc(II)]ethyne (DD), 5,15-bis[[5'-10',20'-bis[3,5-di(3,3-dimethyl-1-butyloxy)phenyl]porphinato)zinc(II)]ethynyl]-10,20-bis[3,5-di(9-methoxy-1,4,7-trioxanonyl)phenyl]porphinato)zinc(II) (DDD), and 5,15-bis[[15' '-(5'-10',20'-bis[3,5-bis(3,3-dimethyl-1-butyloxy)phenyl]porphinato)zinc(II)]-[(5' '-10' ',20' '-bis[3,5-di(9-methoxy-1,4,7-trioxanonyl)phenyl]porphinato)zinc(II)]ethyne]ethynyl]-10,20-bis[3,5-di(9-methoxy-1,4,7-trioxanonyl)phenyl]porphinato)zinc(II) (DDDDD), constitute highly soluble analogues of previously studied examples of this structural motif having simple 10,20-diaryl substituents, while a corresponding set of conjugated oligomers, [(5-10,20-bis[3,5-bis(3,3-dimethyl-1-butyloxy)phenyl]porphinato)zinc(II)]-[(5'-15'-ethynyl-10',20'-bis[10,20-bis(heptafluoropropyl)porphinato)zinc(II)]ethyne (DA), 5,15-bis[[5'-10',20'-bis[3,5-di(3,3-dimethyl-1-butyloxy)phenyl]porphinato)zinc(II)]ethynyl]-10,20-bis(heptafluoropropyl)porphinato]zinc(II) (DAD), and 5,15-bis[[15' '-(5'-10',20'-bis[3,5-bis(3,3-dimethyl-1-butyloxy)phenyl]porphinato)zinc(II)]-[(5' '-(10' ',20' '-bis(heptafluoropropyl)porphinato)zinc(II)]ethyne]ethynyl]-10,20-bis[3,5-di(9-methoxy-1,4,7-trioxanonyl)phenyl]porphinato)zinc(II) (DADAD), features alternating electron-rich and electron-poor (porphinato)zinc(II) units. Electrooptic and computational data for these species demonstrate that it is possible to engineer conjugated oligomeric structures that possess highly delocalized singlet (S1) excited states yet manifest apparent one-electron oxidation and reduction potentials (E1/20/+ and E1/2-/0 values) that are essentially invariant with respect to those elucidated for their constituent monomeric precursors.     

3-Cyclobutenyl-1,2-dione-substituted porphyrins. 2. A simple and general entry to quinone-porphyrin-porphyrin-quinone tetrads and related molecules

The synthesis of meso-linked quinone-porphyrin-porphyrin-quinone tetrads has been accomplished by the simple treatment of a CH2Cl2 solution of zincated 5-substituted-10,20-diphenylporphyrins (where the substituent = 3-cyclobutenyl-1,2-dione, various quinonyl derivatives, and p-anisyl) with 2,3-dichloro-5,6-dicyanoquinone (DDQ). The zincated porphyrinic quinones were synthesized from 5-(3-cyclobutenyl-1,2-dione)-10,20-diphenylporphyrin(Zn). The meso-linked dimer of 5-(3-cyclobutenyl-1,2-dione)-10,20-diphenylporphyrin(Zn) was also shown to be a useful precursor to meso-linked quinone-porphyrin-porphyrin-quinone tetrads. This DDQ-based oxidative dimerization appears to be general and effective for various zincated 5-substituted-10,20-diphenylporphyrins bearing both electron-withdrawing and -donating substituents. The oxidative dimerization was very sensitive to the reaction solvent (dimerization occurred in CH2Cl2, not in THF) and required the zincated porphyrins (the corresponding free base porphyrins did not undergo dimerization). When this solvent effect was applied to the reaction of I2/AgO2CCF3 with zincated porphyrins, either the dimeric porphyrins or iodoporphyrins could be selectively prepared simply by selecting methylene chloride or THF as the reaction solvent, respectively.     

Synthesis of meso-substituted porphyrins carrying carboranes and oligo(ethylene glycol) units for potential applications in boron neutron capture therapy

Selective delivery of 10B to tumours is one of the major remaining problems in boron neutron capture therapy (BNCT) of cancer. Porphyrins are selectively accumulated in tumours. Thus two series of carborane-carrying porphyrins were constructed, with additional functionality for attachment of uncharged potentially water-solubilising polyethers. 3-(1,2-Dicarbaclosododecaboran(12)-1-ylmethoxy)benzaldehyde was prepared by protection of the aldehyde of 3-(prop-2-ynyloxy)benzaldehyde as a dithioacetal, treatment with decaborane(14) and deprotection. Condensation with a 3-nitrophenyldipyrromethane gave a separable mixture of meso-(3-nitrophenyl)-meso-(3-carboranylmethoxyphenyl)porphyrins, resulting from extensive scrambling at the porphyrinogen stage. Similarly, condensation of 3-(1,2-dicarbaclosododecaboran(12)-1-yl)benzaldehyde with this dipyrromethane gave an analogous mixture of meso-(3-nitrophenyl)-meso-(3-carboranylphenyl)porphyrins. In this second series, the two regioisomeric bis(nitrophenyl)bis(carboranylphenyl)porphyrins could only be distinguished by X-ray crystallography, their NMR spectra being identical. The nitro groups of the mono(nitrophenyl)porphyrins and the bis(nitrophenyl)-porphyrins were reduced to the corresponding amines with tin(II) chloride and the monoamines were coupled with a omega-methoxy poly(ethylene glycol) chloroformate of mean MW 600 to give the MeOPEGylated tricarboranyl porphyrins.     

Rational synthesis of meso- or beta- fluoroalkylporphyrin derivatives via halo-fluoroalkylporphyrin precursors: electronic and steric effects on regioselective electrophilic substitution in 5-fluoroalkyl-10,20-diarylporphyrins

[reaction: see text] Electrophilic nitration, formylation or bromination of metalated 5-fluoroalkyl-10,20-diphenylporphyrin (fluoroalkyl = CF3, ClCF2CF2, n-C6F13) proceeded with high regioselectivity, exclusively affording corresponding meso-substituted porphyrins, while the iodination reaction mainly took place at the adjacent beta site giving 2-iodo-10-fluoroalkyl-5,15-diphenylporphyrin. Suzuki, Sonogashira, and trifluoromethylation reactions of the obtained 5-bromo-15-fluoroalkyl-10,20-diphenylporphyrins or 2-iodo-10-fluoroalkyl-5,15-diphenylporphyrins could perform smoothly to give the corresponding various meso- or beta-functionalized fluoroalkylated porphyrin derivatives. Accordingly, two meso-to-meso butadiyne-bridged bisporphyrin dimers and two beta-to-beta butadiyne-linked dimeric porphyrins were prepared by the coupling reactions of 5-ethynyl-15-fluoroalkyl-10,20-diphenylporphyrins and 2-ethynyl-10-fluoroalkyl-5,15-diphenylporphyrins, respectively.     

Electronic modulation of hyperpolarizable (porphinato)zinc(II) chromophores featuring ethynylphenyl-, ethynylthiophenyl-, ethynylthiazolyl-, and ethynylbenzothiazolyl-based electron-donating and -accepting moieties

A series of conjugated (porphinato)zinc(II)-based chromophores structurally related to [5-(4-dimethylaminophenylethynyl)-15-(5-nitrothienyl-2-ethynyl)-10,20-bis(3,5-bis(3,3-dimethyl-1-butyloxy)phenyl)]zinc(II) were synthesized using metal-catalyzed cross-coupling reactions involving [5-bromo-15-triisopropylsilylethynyl-10,20-diarylporphinato]zinc(II), [5-bromo-15-(4-dimethylaminophenylethynyl)-10,20-diarylporphinato]zinc(II), [5-(4-dimethylaminophenylethynyl)-15-ethynyl-10,20-diarylporphinato]zinc(II), and [5-(4-nitrophenylethynyl)-15-ethynyl-10,20-diarylporphinato]zinc(II), along with appropriately functionalized aryl, thienyl (or thiophenyl), thiazolyl, benzothiazolyl, and carbazolyl precursors. The linear and nonlinear optical properties of these asymmetrically 5,15-substitued-(10,20-diarylporphinato)zinc(II) chromophores that bear either 2-(9H-carbazol-9-yl)-thiophen-5-yl-ethynyl, 4-dimethylaminophenylethynyl, or 2-(N,N-diphenylamino)thiophen-5-yl-ethynyl electron-releasing groups and an electron-withdrawing group selected from 2-formyl-thiophen-5-yl-ethynyl, 2-(2,2-dicyanovinyl)-thiophen-5-yl-ethynyl, 4-nitrophenylethynyl, 6-nitrobenzothiazol-2-yl-ethynyl, or 5-nitrothiazol-2-yl-ethynyl are reported. The dynamic hyperpolarizabilities of these compounds were determined from hyper-Rayleigh light scattering measurements carried out at a fundamental incident irradiation wavelength (lambda(inc)) of 1300 nm; these measured beta1300 values ranged from 690 --> 1400 x 10(-30) esu. These data (i) show that these neutral dipolar molecules express substantial beta1300 values, (ii) highlight that reductions in the magnitude of the aromatic stabilization energy of (porphinato)metal-pendant arylethynyl groups have a significant impact upon the magnitude of the molecular hyperpolarizability, and (iii) provide insights into advantageous design modifications for closely related structures having potential utility in long-wavelength electrooptic applications.     

Chemoenzymatic Synthesis of Antiviral Carbocyclic Nucleosides: Asymmetric Hydrolysis of meso-3,5-Bis(acetoxymethyl)cyclopentenes Using Rhizopusdelemar Lipase

7-Substituted norbornadienes were stereoselectively converted into the meso-3,5-bis(acetoxymethyl)cyclopentenes by a three-step sequence of ozonolysis, reduction, and acetylation. Rhizopus delemar lipase (RDL)-catalyzed asymmetric hydrolysis of meso-3,5-bis(acetoxymethyl)cyclopentenes afforded the monoalcohols of high enantiomeric purities (>95% ee) in good yields (64-95%). The obtained monoalcohols 11 and 14 could be applied for the synthesis of antiviral carbocyclic nucleosides (-)-carbovir and (-)-BCA.     

Meso-substituted porphyrin photosensitizers with enhanced near-infrared absorption: Synthesis,characterization and biological evaluation for photodynamic therapy

Porphyrin derivatives are widely explored and used in photodynamic therapy, for their marvelous therapeutic properties. In order to fill in the gaps of insufficient photosensitizers with near-infrared absorption, three porphyrin molecules, 5,10,15,20-tetrakis(3,4-bis(2-(-2-(2-hydroxyethoxy)ethoxy)ethoxy)benzyl)zinc porphyrin(P1), 5,15-bis(3,4-bis(2-(-2-(2-hydroxyethoxy)ethoxy)ethoxy)benzyl)-10,20-bis(2-(2-(2-(4-ethynylphenoxy)ethoxy)ethoxy)ethanol)zincporphyrin(P2),5,15-bis(3,4-bis(2-(-2-(2-hydroxyethoxy)ethoxy)ethoxy)benzyl)-10,20-N,N-dibutyl-4-ethynylaniline zinc porphyrin(P3), were designed and synthesized targeting for more efficient cancer treatment. Excellent photophysical properties were illustrated by UV–vis absorption and emission spectra with enhanced absorbance between 650 and 750?nm and fluorescence emission within 600–800?nm. Besides, with high ¹O₂ quantum yield, especially P2 (0.89), all porphyrins were further evaluated in vitro by 3-(4, 5-dimethyl-2-thiazolyl)-2, 5-diphenyl-2-H-tetrazolium bromide (MTT) assay against Hela cells and exhibited negligible dark toxicity and robust phototoxicity. Fluorescence confocal laser microscopy confirmed cellular uptake and diffusion of these porphyrins, therefore demonstrated their potential and promising applications in photodynamic therapy.     

An anomalous reaction of 7-chloro-2-hydrazono-5-phenyl-1,2-dihydro-3H-1,4-benzodiazepine with sodium acetate and 1,1′-carbonyldiimidazole

The addition of 7-chloro-2-hydrazono-5-phenyl-1,2-dihydro-3H-1,4-benzodiazepine 3 to a mixture of sodium acetate and 1,1′-carbonyldiimidazole 1 at room temperature gave, in moderate yields, carbonyl-1,1′-bis[7-chloro-5-phenyl-1,2-dihydro-3H-1,4-benzodiazepin-2-ylidene hydrazone] 7 instead of the expected 2-acetylhydrazono-7-chloro-5-phenyl-1,2-dihydro-3H-1,4-benzodiazepine 4 .     

Tris(porphyrinyl-oxinato)Ga Complexes as a Photosynthetic Antenna Miniature

Two oxinylporphyrins, 5-(8-hydroxy-5-quinolinyl)-10,15,20-( p -tolyl)- porphyrin ( 1 ) and 5,15-bis(8-hydroxy-5-quinolinyl)-10,20-bis( n -heptyl)-porphyrin ( 2 ), were prepared and coordinated with Ga(III) to afford tris(oxinato) complex 3 and poly(oxinato) complex 4 , respectively. The structure of 3 was analyzed by variable temperature NMR study with referring to tris(8-hydroxy-5-quinolinyl)Ga(III) complex 5 to be in a meridional form. Oxinato ligands of 3 and 5 were exchanged with one another, with keeping the meridional structure. UV-Vis and fluorescence spectra of tris(oxinato)complex 3 and poly(oxinato)complex 4 were compared with each monomeric compound 1 and 2 . The absorption spectra showed only a slight broadening of the Soret band, suggesting trivial electronic and excitonic interactions. The fluorescence intensity was increased significantly compared with each monomeric compound 1 and 2 . At the same time, efficient excitation energy transfer among three porphyrins has been observed.     

The synthesis and proton nuclear magnetic resonance study of some nitro- and amino-unsymmetrically meta-substituted tetraphenylporphyrins

Procedures for the synthesis of new partially-substituted mesotetraphenylporphyrins (TPP's) are described. The 5-(3-nitrophenyl)-10,15,20-triphenylporphyrin is the primary product from a 1:2:3 molar ratio of m-nitrobenzaldehyde, benzaldehyde and pyrrole. The crude reaction product also contained TPP, 5,10-bis-(3-nitrophenyl)-15,20-diphenylporphyrin, 5,15-bis(3-nitrophenyl)-10,20-diphenylporphyrin, and 5,10,15-tris-(3-nitrophenyl)-20-phenylporphyrin. The crude mixture of m-nitrophenylporphyrins was reduced to a mixture of the corresponding amino derivatives, which was separated into TPP, 5-(3-aminophenyl)-10,15,20-triphenylporphyrin, 5,10-bis(3-aminophenyl)-15,20-diphenylporphyrin, and 5,15-bis(3-aminophenyl)-10,20-diphenylporphyrin. The products were characterized by uv-visible and ir spectrophotometry, and by high resolution nmr spectroscopy and mass spectroscopy.     

First general approach to cyclohex-3-ene-1,1-bis(phosphonates) by Diels-Alder cycloaddition of tetraethyl vinylidenebis(phosphonate) to 1,3-dienes

Tetraethyl vinylidenebis(phosphonate) (VBP) reacts smoothly with substituted 1,3-dienes at 90-110 degrees C without solvent to give the corresponding cyclohex-3-ene-1,1-bis(phosphonates) in good yields (60-85%). With nonsymmetrically substituted dienes, mixtures of regioisomers are obtained, the regioisomeric ratio being exclusively controlled by electronic effects. Danishefsky's diene allows tetraethyl 4-oxocyclohex-2-ene-1,1-bis(phosphonate) to be obtained in an 81% overall yield after the acid-catalyzed hydrolysis of the Diels-Alder cycloadduct. With 2,3-dimethoxy-1,3-butadiene, a mixture of regioisomeric dimethoxycyclohexene-1,1-bis(phosphonates) is formed by the VBP-catalyzed isomerization of the normal Diels-Alder cycloadduct. The mixture converges into tetraethyl 3,4-dimethoxycyclohex-2-ene-1,1-bis(phosphonate) at prolonged reaction times.     

含1,2-双(3,5-二氧哌嗪-1)乙烷和(±)-1,2-双(3,5-二氧哌嗪-1)丙烷低聚物的合成

<正> 将低分子药物或有药理活性的基团,通过高分子化,所得的高分子药物,具有较高的为细胞吞噬或胞饮等活性,并期望它们在体内崩解缓释,与相应的低分子药物相比,可以发挥长效、低毒的优点。 1,2双-(3,5-二氧哌嗪-1)乙烷和(±)1,2双(3,5-二氧哌嗪-1)丙烷,是临床使用     

原位生成的水溶性Salen-Pd配合物催化微波促进水中的C-C偶联反应

将一种水溶性Salen,N,N’-双[（5-磺酸基-2-羟基）苄基]缩N,N’-二甲基-1,2-乙二胺（L）与醋酸钯原位生成水溶性Salen-Pd配合物,该水溶性钯配合物应用于催化微波加热的水中的Heck和Sonogashira碳-碳偶联反应.在优化反应条件之后,对溴苯衍生物与乙烯衍生物的Heck偶联反应以及溴苯衍生物与苯乙炔及其衍生物之间的Sonogashira偶联反应进行了考察.发现,在优化的反应条件下,无论是Heck反应,还是Sonogashira偶联反应,都能得到很好的收率.在有机物分离之后,水相继续循环使用4次,在水相的前3次循环使用时,都获得了不错的收率.     

Metalloporphyrins as chemical shift reagents: the unambiguous NMR characterization of the cis- and trans-isomers of meso-(bis)-4′-pyridyl-(bis)-4′-carboxymethylphenylporphyrins

The condensation of pyrrole with 4-pyridylcarboxyaldehyde and methyl 4-formyl benzoate under Adler-Longo conditions yielded the series of meso-(4′-pyridyl)/(4′-carboxymethylphenyl)porphyrins as a mixture. Careful column chromatography afforded each isomer in pure form. In this paper we focus on the two bis-substituted isomeric meso-porphyrins, 5,10-bis(4′-pyridyl)-15,20-bis(4′-carboxymethylphenyl)porphyrin and 5,15-bis(4′-pyridyl)-10,20-bis(4′-carboxymethylphenyl)porphyrin, respectively, 4′-cis and 4′-transDPyDMeP. The assignment of the geometry of the two isomers was performed by ¹H NMR spectroscopy on the trinuclear adducts [(4′-cisDPyDMeP){Ru(TPP)(CO)}₂] and [(4′-transDPyDMeP){Ru(TPP)(CO)}₂], obtained by selective coordination of [Ru(TPP)(CO)(EtOH)] (TPP=tetraphenylporphyrin) to the peripheral nitrogen atoms. The axially bound ruthenium porphyrins act as chemical shift reagents on the central porphyrin, allowing a clear distinction of the pyrrole proton resonances and consequent unambiguous assignment of the geometry of each isomer based upon symmetry considerations.     

New Data on the Reaction of Diethyl Hydrogen Phosphite with 3,5-Di-tert-butyl-4-hydroxybenzaldehyde

3,3',5,5'-Tetra-tert-butylstilbene quinone and 1,2-bis(3,5-di-tert-butyl-4-hydroxyphenyl)-1,2-bis-(diethoxyphosphinoyl)-ethane were isolated from a mixture of products of the reaction of equivalent amounts of diethyl hydrogen phosphite and 3,5-di-tert-butyl-4-hydroxybenzaldehyde. A scheme of chemical transformations in this reaction system was offered.     

Facile and efficient synthesis of meso-arylamino- and alkylamino-substituted porphyrins via palladium-catalyzed amination

meso-Arylamino- and alkylamino-substituted porphyrins were efficiently synthesized by reactions of meso-halogenated porphyrins with amines via palladium-catalyzed amination. The combination of palladium acetate and the commercially available phosphine ligand bis(2-diphenylphosphinophenyl) ether (DPEphos) is effective for catalyzing the couplings of both [5-bromo-10,20-diphenyl porphyrino]zinc(II) and [5,15-dibromo-10,20-diphenylporphyrino]zinc(II) with amines to give the corresponding monoamino- and diamino-substituted porphyrins in high yields under mild conditions. The corresponding halogenated free-base porphyrins also underwent the cross-coupling reactions efficiently under similar catalytic conditions.     

Condensation of acetylacetone with formaldehyde and thiols

Acetylacetone reacted with formaldehyde and thiols in aqueous medium or in the presence of 0.1 equiv of sodium hydroxide to give the corresponding 3-[(alkylsulfanyl)methyl]pentane-2,4-diones which exist in solution as mixtures of diketone and enol tautomers. Four-component condensation of acetylacetone with formaldehyde, methanethiol, and sodium sulfide, depending on the reaction time, led to the formation of a mixture of 1,1-bis(methylsulfanylmethyl)propan-2-one with 1,1′-{3-[(methylsulfanyl)methyl]tetrahydro-2H-thiopyran-3,5-diyl}diethanone or with 8-methyl-5-(methylsulfanylmethyl)-3-thiabicyclo[3.3.1]non-7-en-6-one.     

Manganese(III)-mediated intermolecular cyclization reactions of alkenes and active methylene compounds

The reactions of 1,1-diphenylethene, 1,1-bis(4-chlorophenyl)ethene, 1,1-bis(4-methylphenyl)ethene, and 1,1-bis(4-methoxyphenyl)ethene with 3,5-diacetyl-2,6-heptanedione in the presence of manganese(III) acetate in acetic acid at 80° yielded 4,6-diacetyl-8,8-diaryl-1,3-dimethyl-2,9-dioxabicyclo[4.3.0]non-3-enes (41-48%), 5-acetyl-2,2-diaryl-6-methyl-2,3-dihydrobenzo[b]furans (20–21%), 3-acetyl-5,5-diaryl-2-methyl-4,5-dihydrofurans (5–10%), and benzophenones (3–7%). Similarly, the reactions of 1,1-diarylethenes with dimethyl 2,4-diacetyl-1,5-pentanedioate or diethyl 2,4-diacetyl-1,5-pentanedioate gave the corresponding 4,6-bis(alkoxycarbonyl)-8,8-diaryl-1,3-dimethyl-2,9-dioxabicyclo[4.3.0]non-3-enes in moderate yields.     

Chemistry of a 1-silacyclopropene. Thermal production of 1,4-disilacyclohexa-2,5-dienes

Thermolysis of 1,1-dimethyl-2-phenyl-3-trimethylsilyl-1-silacyclopropene in the presence or absence of an alkyne such as diphenylacetylene or ethyl-dimethylsilylphenylacetylene gave a mixture of 1,1,4,4-tetramethyl-2,5-diphenyl-3,6-bis(trimethylsilyl- and 1,1,4,4-tetramethyl-2,6-diphenyl-3,5-bis(trimethylsilyl)-1,4-disilacyclohexa-2,5-diene in high yield. The formation of the 1,4-disilacyclohexa-2,5-diene system can be best rationalized in terms of a mechanism involving direct dimerization of the 1-silacyclopropene.