正极材料LiNi0.45Co0.1Mn0.45O2的制备与性能

正极材料LiNi0.45Co0.1Mn0.45O2的制备与性能;正极材料; 溶胶凝胶合成法; 电化学性能; 锂离子电池     

Ab Initio Modeling of Interatomic Interactions in 3C–SiC:M, M = Cr, Mn, Fe, Co

The electronic structure and chemical binding parameters of impurity atoms M = Cr, Mn, Fe, Co in cubic silicon carbide are considered in DFT (density functional theory) and X-DV (discrete variation) approximations. A scheme for calculating the binding energies in the cluster approach is suggested. Stoichiometric and superstoichiometric models of impurity incorporation are investigated. The binding energy is higher for the stoichiometric model. In the superstoichiometric model, the titanium and iron atoms preferably occupy the Si₄ interstice. For all other atoms, the MSi, Sii model is preferable. The incorporated impurity weakens the basic Si–C bonds.     

BaZr0.45Ce0.45Y0.1O3-δ的合成及其电性能研究

采用高温固相反应制备了电导率高、化学稳定性较好的新型高温质子导体BaZr0.45Ce0.45Y0.1O3-δ材料.运用X射线衍射仪、扫描电子显微镜分别对不同烧结温度试样的晶型、微观形貌进行了表征,并应用IM6e型电化学工作站测定了其不同温度下的阻抗谱.结果表明1600℃为最佳的烧结温度,此温度烧结试样具有最高的电导率,800℃约为1.06×10-2S·cm-1,电导活化能为0.76 ev.     

Synthesis, structure, and properties of M[VO2(XO4)(H2O)2] · H2O (X = S, M = K, Rb, NH4, Tl; X = Se, M = K, Rb, NH4)

Keeping of MVO(XO₄)₂ under saturated vapor pressure at room temperature resulted in the synthesis of a number of isostructural complexes M[VO₂(XO₄)(H₂O)₂] · H₂O, where X = S, M = K, Rb, NH₄, Tl and X = Se, M = K, Rb, NH₄. The conclusion about the isostructural nature of the synthesized sulfate and selenate compounds was based on X-ray diffraction and vibrational spectroscopy data. Characteristic features of the thermal decomposition of M[VO₂(XO₄)(H₂O)₂] · H₂O on heating in air were identified. It was shown that K[VO₂(SeO₄)(H₂O)₂] · H₂O tends to undergo spontaneous dehydration under ambient conditions to give the monohydrate K[VO₂(SeO₄)(H₂O)].     

Li-storage and cycling properties of Sn–Sb-mixed oxides, (M1/2Sb1/2Sn)O4, M = In, Fe

The mixed oxide compounds, (M_1/2Sb_1/2Sn)O₄, M = In and Fe are prepared by the high-temperature solid-state reaction, at 800 °C for M = In and at 1,150 °C for M = Fe. High-energy ballmilling is used to reduce the particle size to nm-range. The compounds are characterized by X-ray diffraction, Rietveld refinement, scanning electron microscopy, and Brunauer–Emmett–Teller surface area methods. The Li-storage and cycling properties of the bare and ballmilled compounds are evaluated by galvanostatic cycling at ~0.15 C and in the voltage ranges 0.005–1.0 and 0.005–1.2 V vs. Li up to 50 (or 100) cycles and by cyclic voltammetry (CV) at room temperature. Effect of electrode heat treatment and carbon nanotube (CNT) addition is also studied. Initial reversible capacities in the range 425–550 mAh g^?1 are observed depending on the metal (M) upper cut-off voltage, CNT content and electrode heat treatment. Ballmilled (In_1/2Sb_1/2Sn)O₄ showed a stable capacity of 445 mAh g^-1 up to 30 cycles and 5 % capacity fading after 50 cycles. In all other cases, capacity fading is observed ranging from 9 to 60 %. The CV showed that the main cathodic and anodic peaks occur at 0.15–0.25 V and ~0.5 V vs. Li, respectively, for both M. The reaction mechanism involves alloying–de-alloying reactions of Sn and In with Li₃Sb or Fe acting as conducting matrix, and corroborated by the ex-situ X-ray diffraction data on (In_1/2Sb_1/2Sn)O₄.     

Halogen bonds and metal bonds involving superalkalies M2OCN/M2NCO (M = Li,Na) complexes

Structural Chemistry - A new type of halogen bond formed by supermetals or superalkalies with dihalogen molecules was analyzed by means of ab initio at the MP2/aug-cc-pVTZ level. The results reveal...     

Pt/MO2/CNTs（M=Sn,Ti,Ce）催化剂上乙醇电氧化研究

应用循环伏安法研究了几种催化剂Pt/MO2/CNTs(M=Sn,Ti,Ce)和Pt/CNTs对乙醇在H2SO4溶液中的电催化氧化过程.结果表明,金属氧化物的加入有利于乙醇的电氧化.其中,Pt/CeO2/CNTs对乙醇电氧化中间态产物具有显著的氧化性能.综合初始氧化电位、峰电流和总氧化峰面积等参数,可以得出Pt/SnO2/CNTs催化剂性能最佳.     

Ce0.45Zr0.45Y0.07La0.03O1.95/La-Ba-Al2O3质量比对整体式铁基催化剂上稀薄甲烷燃烧的影响

采用共沉淀法和胶溶法分别制备了高性能的储氧材料Ce0.45Zr0.45Y0.07La0.03O1.95(OSM)和耐高温高比表面的La-Ba-Al2O3,并以它们为载体,制备了一系列整体式铁基催化剂.考察了该系列催化剂对甲烷稀薄燃烧的催化性能.并用低温N2吸附-脱附,储氧量(OSC)测试,X射线衍射(XRD)和H2程序升温还原(H2-TPR)等测试手段考察了不同Ce0.45Zr0.45Y0.07La0.03O1.95/La-Ba-Al2O3质量比对催化剂特性的影响.活性测试结果表明,当Ce0.45Zr0.45Y0.07La0.03O1.95/La-Ba-Al2O3质量比为1:1时新鲜和老化催化剂的活性均最好,新鲜催化剂可在50000h-1的高空速条件下使含量为1%(体积分数)的甲烷在446℃起燃,553℃完全转化;低温氮气吸附-脱附测试结果和H2-TPR表明,不同的Ce0.45Zr0.45Y0.07La0.03O1.95/La-Ba-Al2O3质量比使催化剂表现出不同的织构性能和还原性能;XRD测试结果表明,OSM以均一固溶体存在,Fe高度分散在载体上.综合以上表征手段得出:合适的Ce0.45Zr0.45Y0.07La0.03O1.95/La-Ba-Al2O3质量比导致催化剂具有优异的稀薄甲烷催化燃烧活性和热稳定性.     

M/C3N4/AC (M=Au,Pt,Ru)催化乙炔与二氯乙烷耦合反应:双功能催化剂性能如何?

聚氯乙烯是世界上产量最大的通用塑料,在日常生活的诸多领域具有广泛应用.按照原料来源划分,聚氯乙烯的工业生产方法主要有基于煤炭的电石法和基于石油的"平衡法".我国有丰富的煤炭资源,因此,电石乙炔法是合成聚氯乙烯的主要途径.该方法采用乙炔与氯化氢在活性炭担载氯化汞催化剂上进行氢氯化反应得到聚氯乙烯的单体氯乙烯.然而,由于汞...     

Ce0.50Zr0.50O2中掺杂M(M = Mn,Y)对乙酸乙酯燃烧催化剂MnOx/Ce0.50-zZr0.50-zM2zOy/Al2O3性能的影响

考察了乙酸乙酯催化燃烧时,铈锆固溶体中掺杂M (M = Mn, Y)对催化剂MnO_x/Ce_0.50-zZr_0.50-zM_2zO_y/Al₂O₃活性的影响。结果表明: Mn的掺杂明显增加了储氧材料的储氧量(OSC),Y的掺杂明显降低了催化剂的还原温度;Mn 和Y的同时掺杂兼具Mn掺杂和Y掺杂的优点。催化剂MnO_x/Ce_0.40Zr_0.40Mn_0.10Y_0.10O_y/Al₂O₃ 性能最佳,完全转化温度为513K,且T_10% 和 T_100%间隔的温度范围最窄,可适用于较大初始浓度变化范围和较高空速(GHSV)条件下的乙酸乙酯净化。H₂程序升温还原(H₂-TPR)和X射线衍射(XRD)测试显示,MnO_x/Ce_0.40Zr_0.40Mn_0.10Y_0.10O_y/Al₂O₃具有较低的还原温度和较大的还原峰面积; Mn 和Y进入铈锆固溶体的晶格,改善了其织构性能,促进了锰氧化物在载体表面的分散。     

Catalytic Combustion of Methane over MnOx／ZrO2-Al2O3 Catalysts

MnOx/Al2O3 and MnOx/ZrO2-Al2O3 catalysts were prepared by incipient wetness impregnation of Mn(CH3COO)2 on the corresponding supports, followed by the characterization using X-ray diffraction (XRD). temperature programmed reduction (TPR) and BET surface area techniques. The result shows the BET surface area of ZrO2-Al2O3 is lower than that of Al2O3 due to the loading of ZrO2.However tile resulted MnOx/ZrO2-Al2O3 catalyst exhibits higher activity for methane combustion than MnOx/Al2O3, because the addition of ZrO2 onto Al2O3 is beneficial for the dispersion of Mn species and the improvement of the lattice oxygen activity in MnOx. subsequently the activation of methane during combustion. The optimum loading of Zr in MnOx/ZrO2-Al2O3 is in the range of 5%-10% correlated with the calcination temperatures of catalyst supports.     

Doping of Ceria-Zirconia Solid Solution with Rare-earth Elements

The increasingly restrictive regulations on car exhaust emissions will necessitate the development of a new generation of three way catalysts (TWC) with better performance1. Ceria (CeO2) is the main component of the current TWC: its key role is to compensate the fluctuations in the exhaust stream composition, therefore, allowing to expand the air/fuel(A/F) operating window of catalytic converters2. This property is related to its oxygen storage capacity (OSC), associated to the redox couple Ce4+/Ce3+. However, CeO2 alone is easy to sinter to lost OSC at high temperature3.Ceria-zirconia (CexZr1-xO2) solid solutions by incorporation of Zr4+ in the CeO2 lattice have enhanced OSC and greater thermal stability, which are becoming the key materials for the new generation of TWC4. OSC of ceria-zirconia solid solutions can be further improved by the addition of M3+ dopants5. Besides Ce, other rare-earth elements such as Pr and Tb can vary their oxidation state. Pr and Tb are particularly suitable for making solid solutions with cerium because the known structure of PrO2 and TbO2 is of the cubic fluorite type, and the ionic radii of Pr4+ and Tb4+ are close to that of Ce4+6.In this paper, Ce0.6Zr0.3M0.1O2 (M=Y, La, Pr, Tb) were prepared by co-precipitation technique and characterized by a series of methods. Meanwhile, palladium-only TWCs were prepared by slurry coating and their catalytic activity was evaluated under the condition of simulated exhaust in the lab.XRD and FT-Raman spectra results show Ce0.6Zr0.3M0.1O2 have cubic fluorite structure which keep unchanging at high temperature. The different dopant ion radii brought different effect on the cell parameter of Ce0.6Zr0.3M0.1O2. The X-ray photoelectron spectroscopy (XPS) results show that the binding energy of Ce3d, Zr3d and O1s for Ce0.6Zr0.3M0.1O2 rose compared with that for Ce0.6Zr0.4O2, indicating dopant elements changed chemistry environment of solid solutions which was available to improve redox performance From TPR results, doping La can not change redox performance of solid solution, but doping Y decreased reduction temperature. Doping Pr and Tb notably improved redox performance of solid solutions due to appearance of low-temperature reduction peak in TPR profile which come from mobility of bulk oxygen.Compared with Pd/Ce0.6Zr0.4O2, doping Y and La unchanged A/F characteristic of TWCs, but doping Pr and Tb widen A/ F operating window and make HC, CO and NO have higher conversion.The light-off temperature of Pd/Ce0.6Zr0.3La0.1O2 was corresponded to that of Pd/Ce0.6Zr0.4O2.However, the light-off temperatures of Pd/Ce0.6Zr0.3M0.1O2 (M=Y, Pr, Tb) were lower than that of Pd/Ce0.6Zr0.4O2, which kept much lower after high temperature treatments. Among Pd/Ce0.6Zr0.3M0.1O2 (M=Y, La, Pr, Tb), Pd/Ce0.6Zr0.3Tb0.1O2 showed wider A/F operating window,higher conversion, lower light-off temperature and better high-temperature resistance     

Ce0.35Zr0.55La0.10O1.95对低贵金属Pt-Rh型三效催化剂性能的影响

采用共沉淀技术制备了Ce0.35Zr0.55La0.10O1.95固溶体, 其织构和结构性能以及氧化还原性能分别采用BET、XRD和程序升温(TP)技术进行了表征. 制备了低贵金属Pt-Rh型三效催化剂, 考察了Ce0.35Zr0.55La0.10O1.95对催化剂性能的影响. XRD和BET的结果表明, 经600 ℃焙烧5 h后, Ce0.35Zr0.55La0.10O1.95具有与Ce0.50Zr0.50O2相似的立方结构和高的比表面积；经1000 ℃焙烧5 h后, 仍能保持稳定的立方结构和47.25 m2•g−1的比表面积, 表现出优越的织构性能和高的热稳定性. H2-TPR和O2-TPO的结果表明, Ce0.35Zr0.55La0.10O1.95具有比Ce0.50Zr0.50O2更好的氧化还原性能. 和含Ce0.50Zr0.50O2的催化剂相比, 含Ce0.35Zr0.55La0.10O1.95的催化剂具有较宽的工作窗口, 优越的低温起燃性能, 较强的水气变换能力；催化剂经1000 ℃高温水热老化5 h后, 仍具有良好的催化活性, 表现出了优异的抗老化性能.     

CeO2-MnOx催化剂上氯乙烯有机废气的催化燃烧

采用柠檬酸(CA)溶胶-凝胶法制备了不同Mn:(Ce+Mn)摩尔比的CeO2-MnOx催化剂,以氯乙烯有机废气的催化燃烧为模型反应,考察了催化剂制备条件和反应条件对于CeO2-MnOx催化剂性能的影响,并用N2吸附、X射线衍射(XRD)和H2程序升温还原(H2-TPR)对催化剂进行了表征.结果表明,CeO2-MnOx催化剂上氯乙烯燃烧反应产物只有HCl,H2O和CO2,没有检测到其他氯代烃和氯气等副产物.当CA:Mn:Ce=0.3:0.50:0.50时,所制备的CeO2-MnOx催化剂活性最高,对于较宽的空速范围(10000～30000h-1)和较宽的浓度范围(0.05%～0.15%),低浓度氯乙烯的催化燃烧反应具有较好的操作弹性.其中当氯乙烯浓度为0.1%,空速为15000h-1时,起燃温度T50=110oC,完全转化温度T99=220oC.XRD和H2-TPR结果表明,在CeO2-MnOx催化剂中只出现立方相萤石结构CeO2的特征衍射峰,没有出现MnOx物种的特征衍射峰;Mn离子进入CeO2晶格形成的Ce-Mn-O固溶体,有利于提高催化剂表面的活性氧物种的活性,乃至催化剂活性.     

乙酸乙酯在Al2O3-Ce0.5Zr0.5O2负载的金属氧化物催化剂上的催化燃烧

制备了Fe, Co, Cu, Cr和Mn金属氧化物催化剂, 所用载体为Al2O3-Ce0.5Zr0.5O2复合氧化物. 利用X射线衍射(XRD), 程序升温还原(TPR), 储氧量测试, BET比表面测试和光电子能谱(XPS)表征了催化剂. 并利用活性测试表征了各种催化剂对乙酸乙酯催化燃烧能力. 各种表征结果证实, 由于催化剂Mn/Al2O3-Ce0.5Zr0.5O2(1:2, 质量比)具有最多的可还原物种, Cu/Al2O3-Ce0.5Zr0.5O2(1:2)具有较多的可还原物种和最强的可还原能力, 使它们对乙酸乙酯催化燃烧表现出了最好的活性. 在催化剂Cu/Al2O3-Ce0.5Zr0.5O2(1:2)和Mn/Al2O3-Ce0.5Zr0.5O2(1:2)上, 乙酸乙酯于245 ℃转化了99%, 表明这两种催化剂具有广泛的应用潜力.     

高效 CeO2-MnOx-Al2O3催化剂的制备、表征及催化消除 NO性能

机动车在给人类生活带来便利的同时,也造成了严重的大气污染.其尾气净化成为人们关注的焦点.一氧化氮(NO)、一氧化碳(CO)和碳氢化合物(HCs)是机动车尾气中的三大典型污染物,主要通过三效催化(TWC)技术进行脱除. TWC技术涉及几个重要的催化反应,其中 CO催化还原 NO由于能够同时消除 CO和 NO两种污染物而引起研究者的极大关注.研究表明,负载型贵金属催化剂在该反应中显示出优异的催化性能,但存在资源匮乏、价格昂贵以及热稳定性欠佳等不足.因此,低价、高效的过渡金属氧化物催化剂成为近年研究重点.稀土金属氧化物 CeO2由于具有良好的氧化还原性能、较高的储释氧容量以及丰富的表面氧空位而被广泛用于 CO催化还原 NO反应.研究表明,对 CeO2进行离子掺杂可进一步增大其比表面积,改善其氧化还原性能和储释氧容量.并且,我们在先前的研究中还发现,将具有多种可变价态的钛离子或锡离子掺入 CeO2晶格由于掺杂离子能与 Ce4+/Ce3+发生电子转移而更有利于改善 CeO2的理化性质.此外,锰氧化物(MnOx)在氧化还原气氛中容易实现不同价态之间的切换,从而在一些重要的氧化还原反应中表现出优异的催化性能.近年来,有研究者将 CeO2与 MnOx相结合制备了 CeO2-MnOx催化剂用于 NO消除、碳烟燃烧和挥发性有机物(VOCs)氧化等反应,并取得一些有意义的结果.然而,对于实际应用来说, CeO2-MnOx催化剂存在比表面积偏小等不足.众所周知,γ-Al2O3是一种常用的具有高比表面积和高热稳定性的催化剂载体材料,可有效增大催化剂比表面积.我们前期研究结果表明,通过共沉淀法将 Al3+掺入铈基复合氧化物的晶格相比于以γ-Al2O3为载体更有利于改善铈基复合氧化物的理化性质和催化性能.因此,我们通过简单的氨水反滴加共沉淀法制备了一系列 CeO2-MnOx-Al2O3(Ce：Mn：Al摩尔比=6：4：x,x =0.25,0.5,1,2)复合氧化物催化剂用于 CO催化还原 NO反应.并运用 X射线衍射、拉曼光谱、氮气物理吸附、氢气程序升温还原、X射线光电子能谱以及原位漫反射红外光谱等表征技术对上述催化剂进行了系统分析.重点考察了 Al3+掺杂量对 CeO2-MnOx-Al2O3复合氧化物催化剂理化性质和催化性能的影响.结果表明,在 CeO2-MnOx复合氧化物中掺入少量 Al3+会导致其晶粒尺寸减小,从而增大其比表面积和孔体积,并增加 Ce3+和 Mn4+的含量.比表面积和孔体积增大有助于催化剂与反应物分子之间充分接触; Ce3+和 Mn4+含量增加能分别促进 CO物种吸附以及吸附态 NO物种脱附、转化和解离.这些变化有利于提高 CeO2-MnOx复合氧化物在 CO催化还原 NO反应中的催化性能.最后,基于催化剂的理化性质表征及其催化性能评价,我们尝试提出了一个可能的催化反应机理,以进一步理解 CeO2-MnOx-Al2O3复合氧化物催化剂在 CO催化还原 NO反应中的优异性能.     

Selective catalytic oxidation of NO with O2 over Ce-doped MnOx/TiO2 catalysts

A series of Ce-doped MnOx/TiO2 catalysts were prepared by impregnation method and used for catalytic oxidation of NO in the presence of excess O2. The sample with the Ce doping concentration of Ce/Mn=1/3 and calcined at 300°C shows a superior activity for NO oxidation to NO2. On Ce(1)Mn(3)Ti catalyst, 58% NO conversion was obtained at 200°C and 85% NO conversion at 250°C with a GHSV of 41000 h-1, which was much higher than that over MnOx/TiO2 catalyst (48% at 250°C). Characterization results implied that the higher activity of Ce(1)Mn(3)Ti could be attributed to the enrichment of well-dispersed MnOx on the surface and the abundance of Mn3+ and Ti3+ species. The addition of Ce into MnOx/TiO2 could improve oxygen storage capacity and facilitate oxygen mobility of the catalyst as shown by PL and ESR, so that its activity for NO oxidation could be enhanced. The effect of H2O and SO2 on the catalyst activity was also investigated.     

Effect of Transition Metals (Cu, Co and Fe) on the Autothermal Reforming of Methane over Ni/Ce0.2Zr0.1Al0.7Oδ Catalyst

The transition metals (Cu, Co, and Fe) were applied to modify Ni/Ce0.2Zr0.1Al0.7Oδ catalyst.The effects of transition metals on the catalytic properties of Ni/Ce0.2Zr0.1Al0.7Oδ autothermal reforming of methane were investigated. The Ni-supported catalysts were characterized by XRD, TPR and XPS.Tests in autothermal reforming of methane to hydrogen showed that the addition of transition metals (Cu and Co) significantly increased the activity of catalyst under the conditions of lower reaction temperature,and Ni/Cu0.05Ce0.2Zr0.1Al0.65Oδ was found to have the highest conversion of CH4 among all catalysts in the operation temperatures ranging from 923 K to 1023 K. TPR, XRD and XPS measurements indicated that the cubic phases of CexZr1-xO2 solid solution were formed in the preparation process of catalysts.Strong interaction was found to exist between NiO and CexZr1-xO2 solid solution. The addition of Cu improved the dispersion of NiO, inhibited the formation of NiAl2O4, and thus significantly promoted the activity of the catalyst Ni/Cu0.05Ce0.2Zr0.1Al0.65Oδ.