Nanocrystalline MnO thin film anode for lithium ion batteries with low overpotential

Nanocrystalline MnO thin film has been prepared by a pulsed laser deposition (PLD) method. The reversible lithium storage capacity of the MnO thin film electrodes at 0.125C is over 472 mAh g^?1 (3484 mAh cm^?3) and can be retained more than 90% after 25 cycles. At a rate of 6C, 55% value of the capacity at 0.125C rate can be obtained for both charge and discharge. As-prepared MnO thin film electrodes show the lowest values of overpotential for both charge and discharge among transition metal oxides. All these performances make MnO a promising high capacity anode material for Li-ion batteries.     

Binder-free porous core–shell structured Ni/NiO configuration for application of high performance lithium ion batteries

An interwoven core–shell structured Ni/NiO anode for lithium ion batteries was created by a simple oxidation of Ni foam. As-prepared configuration has a high specific discharge capacity of 701 mAh g^?1 at the 2nd cycle. Its electrochemical performance at subsequent cycles shows good energy capacity of 646 mAh g^?1 at the 65th cycle as well as good rate capability. The porous core–shell structure not only buffers the volume change during cycling but also effectively increases the contact among anode, current collector and electrolyte. The small contact resistance between NiO and Ni facilitates enhanced intrinsic kinetics from conversion reaction.     

High capacity and excellent cyclability of vanadium (IV) oxide in lithium battery applications

A VO₂ · 0.43H₂O powder with a flaky particle morphology was synthesized via a hydrothermal reduction method. It was characterized by scanning electron microscopy, electron energy loss spectroscopy, and thermogravimetric analysis. As an electrode material for rechargeable lithium batteries, it was used both as a cathode versus lithium anode and as an anode versus LiCoO₂, LiFePO₄ or LiNi_0.5Mn_1.5O₄ cathode. The VO₂ · 0.43H₂O electrode exhibits an extraordinary superiority with high capacity (160 mAh g^?1), high energy efficiency (95%), excellent cyclability (142.5 mAh g^?1 after 500 cycles) and rate capability (100 mAh g^?1 at 10 C-rate).     

Superior storage performance of carbon nanosprings as anode materials for lithium-ion batteries

Carbon nanosprings (CNSs) with spring diameter of ～140 nm, carbon ring diameter of ～100 nm and pitch distance of ～150 nm, synthesized by using a catalytic chemical vapor deposition technology, have been investigated for potential applicability in lithium batteries as anode materials. The electrochemical results demonstrate that the present CNSs are superior anode materials for rechargeable lithium-ion batteries with high-rate capabilities, as well as long-term cycling life. At a current density as high as 3 A g^?1, CNSs can still deliver a reversible capacity of 160 mA h g^?1, which is about six times larger than that of graphite and three times larger than that of multi-wall carbon nanotubes under the same current density. After hundreds of cycles, there is no significant capacity loss for CNSs at both low and high current densities. The much improved electrochemical performances could be attributed to the nanometer-sized building blocks as well as the unusual spring-like morphology.     

Hierarchically ordered porous nickel oxide array film with enhanced electrochemical properties for lithium ion batteries

Hierarchically ordered porous nickel oxide array film was prepared by electrodeposition through monolayer polystyrene spheres template. The as-prepared film had a highly porous structure of interconnected macrobowls array possessing nanopores. As anode material for lithium ion batteries, the porous array NiO film exhibited weaker polarization, higher coulombic efficiency and better cycling performance in comparison with the dense NiO film. After 50 cycles, the discharge capacity of porous array NiO film was 518 mAh g^? 1 at 1 C rate, higher than that of the dense NiO film (287 mAh g^? 1). The enhancement of the electrochemical properties was due to the unique hierarchical porous architecture, which provided fast ion/electron transfer and alleviated the structure degradation during the cycling process.     

Fabrication of porous carbon/Si composite nanofibers as high-capacity battery electrodes

Carbon/Si composite nanofibers with porous structures are prepared by electrospinning and subsequent carbonization processes. It is found that these porous composite nanofibers can be used as anode materials for rechargeable lithium-ion batteries (LIBs) without adding any binding or conducting additive. The resultant anodes exhibit good electrochemical performance; for example, a large discharge capacity of 1100 mAh g^?1 at a high current density of 200 mA g^?1.     

Flexible free-standing graphene-silicon composite film for lithium-ion batteries

Flexible, free-standing, paper-like, graphene-silicon composite materials have been synthesized by a simple, one-step, in-situ filtration method. The Si nanoparticles are highly encapsulated in a graphene nanosheet matrix. The electrochemical results show that graphene-Si composite film has much higher discharge capacity beyond 100 cycles (708 mAh g^? 1) than that of the cell with pure graphene (304 mAh g^? 1). The graphene functions as a flexible mechanical support for strain release, offering an efficient electrically conducting channel, while the nanosized silicon provides the high capacity.     

Fabrication and electrochemical properties of the Sn–Ni–P alloy rods array electrode for lithium-ion batteries

A new ternary Sn–Ni–P alloy rods array electrode for lithium-ion batteries is synthesized by electrodeposition with a Cu nanorods array structured foil as current collector. The Cu nanorods array foil is fabricated by heat treatment and electrochemical reduction of Cu(OH)₂ nanorods film, which is grown directly on Cu substrate through an oxidation method. The Sn–Ni–P alloy rods array electrode is mainly composed of pure Sn, Ni₃Sn₄ and Ni–P phases. The electrochemical experimental results illustrate that the Sn–Ni–P alloy rods array electrode has high reversible capacity and excellent coulombic efficiency, with an initial discharge capacity and charge capacity of 785.0 mAh g^?1 and 567.8 mAh g^?1, respectively. After the 100th discharge–charge cycling, capacity retention is 94.2% with a value of 534.8 mAh g^?1. The electrode also performs with an excellent rate capacity.     

ZIF-8 derived nano-SnO2@ZnO as anode for Zn/Ni secondary batteries

SnO₂@ZnO was synthesized by a new method involving the immobilization of Sn onto zeolitic imidazolate framework-8 (ZIF-8) followed by calcination. The synthesized nanoparticles were characterized as 20–30 nm spherical ZnO particles uniformly dotted with SnO₂. When SnO₂@ZnO were used as anode material for Zn/Ni batteries, the average specific capacity was approximately 600 mAh g^− 1 and remained stable after 150 cycles at a rate of 1 C.     

Fabrication and electrochemical performance of nickel ferrite nanoparticles as anode material in lithium ion batteries

Nano-sized nickel ferrite (NiFe₂O₄) was prepared by hydrothermal method at low temperature. The crystalline phase, morphology and specific surface area (BET) of the resultant samples were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM) and nitrogen physical adsorption, respectively. The particle sizes of the resulting NiFe₂O₄ samples were in the range of 5–15 nm. The electrochemical performance of NiFe₂O₄ nanoparticles as the anodic material in lithium ion batteries was tested. It was found that the first discharge capacity of the anode made from NiFe₂O₄ nanoparticles could reach a very high value of 1314 mAh g⁻¹, while the discharge capacity decreased to 790.8 mAh g⁻¹ and 709.0 mAh g⁻¹ at a current density of 0.2 mA cm⁻² after 2 and 3 cycles, respectively. The BET surface area is up to 111.4 m² g⁻¹. The reaction mechanism between lithium and nickel ferrite was also discussed based on the results of cycle voltammetry (CV) experiments.     

Partially reduced SnO2 nanoparticles anchored on carbon nanofibers for high performance sodium-ion batteries

One-dimensional (1-D) carbon nanofibers anchored with partially reduced SnO₂ nanoparticles (SnO₂/Sn@C) were successfully synthesized through a simple electrospinning method followed by carbon coating and thermal reduction processes. The partially reduced Sn frameworks, combined with the carbon fibers, provide a more favorable mechanism for sodiation/desodiation than SnO₂. As a result, SnO₂/Sn@C exhibits a high reversible capacity (536 mAh g^− 1 after 50 cycles) and an excellent rate capability (396 mAh g^− 1 even at 2 C rate) when evaluated as an anode material for sodium-ion batteries (SIBs).     

Structural and electrochemical properties of a porous nanostructured SnO2 film electrode for lithium-ion batteries

A B₂O₃-doped SnO₂ thin film was prepared by a novel experimental procedure combining the electrodeposition and the hydrothermal treatment, and its structure and electrochemical properties were investigated by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD) analysis, energy dispersive X-ray (EDX) spectroscopy and galvanostatic charge–discharge tests. It was found that the as-prepared modified SnO₂ film shows a porous network structure with large specific surface area and high crystallinity. The results of electrochemical tests showed that the modified SnO₂ electrode presents the largest reversible capacity of 676 mAh g^?1 at the fourth cycle, close to the theoretical capacity of SnO₂ (790 mAh g^?1); and it still delivers a reversible Li storage capacity of 524 mAh g^?1 after 50 cycles. The reasons that the modified SnO₂ film electrode shows excellent electrochemical properties were also discussed.     

Microstructures and electrochemical hydrogen storage properties of novel Mg–Al–Ni amorphous composites

The amorphous Mg–Al–Ni composites were prepared by mechanical ball-milling of Mg₁₇Al₁₂ with x wt.% Ni (x = 0, 50, 100, 150, 200). The effects of Ni addition and ball-milling parameters on the electrochemical hydrogen storage properties and microstructures of the prepared composites have been investigated systematically. For the Mg₁₇Al₁₂ ball-milled without Ni powder, its particle size decreases but the crystal structure does not change even the ball-milling time extending to 120 h, and its discharge capacity is less than 15 mAh g^?1. The Ni addition is advantageous for the formation of Mg–Al–Ni amorphous structure and for the improvement of the electrochemical characteristics of the composites. With the Ni content x increasing, the composites exhibit higher degree of amorphorization. Moreover, the discharge capacity of the composite increases from 41.3 mAh g^?1 (x = 50) to 658.2 mAh g^?1 (x = 200) gradually, and the exchange current density I₀ increases from 67.1 mA g^?1 (x = 50) to 263.8 mA g^?1 (x = 200), which is consistent with the variation of high-rate dischargeability (HRD). The ball-milled Mg₁₇Al₁₂ + 200 wt.% Ni composite has the highest cycling discharge capacity in the first 50 cycles.     

Electrochemical behavior of a micro-patterned Si anode/LiV3O8 secondary cell

Using a micro-patterned Si plate, a Li secondary cell was assembled and tested for its electrochemical properties. A micro-patterned Si plate was made by photolithography. This was followed by Pt coating and Li deposition. With a non-lithiated LiV₃O₈ cathode, a Li-deposited micro-patterned Si anode was assembled as a secondary cell. The cell exhibited an initial charge/discharge capacity of about 220 mAh g^? 1 at a current density of 0.1 C-rate and it continued for more than 100 cycles without failure. The morphologies of Li deposition/dissolution in the anode were observed via scanning electron microscopy (SEM). Dendrite behavior of the Li metal was not observed on the anode during the cyclic process.     

Electrochemical performance of nanocomposite LiMnPO4/C cathode materials for lithium batteries

A LiMnPO₄/C composite cathode was prepared by a combination of spray pyrolysis and wet ball milling. The cathode showed stable performance at various cutoff voltages up to 4.9 V. The cutoff voltage increase up to 4.9 V allowed the achievement of a high discharge capacity in galvanostatic charge–discharge tests. The discharge capacities of 153 mAh g^?1 at 0.05 C and 149 mAh g^?1 at 0.1 C were achieved at room temperature; the trickle-mode discharge capacities at room temperature were 132, 120 and 91 mAh g^?1 at 0.1, 1 and 5 C discharge rates, respectively. The cell exhibited a good rate capability in the galvanostatic cycling up to 5 C discharge rates at both ambient temperature and 50 °C.     

Bismuth nanosheets grown on carbon fiber cloth as advanced binder-free anode for sodium-ion batteries

The bismuth nanosheets grown on carbon fiber cloth were designed. For sodium-ion batteries, the Bi/CFC electrode exhibited a high reversible capacity of 350 and 240 mAh g^− 1 after 300 cycles at 50 and 200 mA g^− 1, as well as a good rate capability. Besides, the electrode displayed two flat potential profiles during the charge/discharge process. The results suggest that the Bi/CFC electrode has excellent potential as an anode for sodium-ion batteries.     

Improved electrochemical performances of core-shell Cu2O/Cu composite prepared by a simple one-step method

Core-shell Cu₂O/Cu composites were successfully prepared by over-reduction of aqueous CuSO₄ with hydrazine hydrate as reductant. Field emission scanning electron microscopy (SEM) and high resolution transmission electron microscopy (HRTEM) clearly illuminate that the core is Cu₂O with 400 nm in diameter, and the shell is Cu with about 50 nm in thickness. The core-shell Cu₂O/Cu exhibited weaker polarization and higher coulombic efficiency than pure octahedral Cu₂O, especially in the initial stage of cycles. After 50 cycles, the reversible capacity of Cu₂O/Cu (360 mAh g^?1) was much higher than that of pure Cu₂O (160 mAh g^?1). The improvement of electrochemical properties is attributed to the core-shell structure of Cu₂O/Cu and the catalytic effect of Cu on the decomposition of Li₂O during the charging process.     

Li2ZnTi3O8 nanorods: A new anode material for lithium-ion battery

Spinel Li₂ZnTi₃O₈ nanorods were first synthesized using titanate nanowires as a precursor. The synthesized nanorods are highly crystalline and used as an anode material in a rechargeable Li-ion battery. A large capacity of 220 mA h g^? 1 was kept after 30 cycles at a current density of 0.1 A g^? 1, which is close to the theoretic capacity. The electrochemical measurements indicate that the anode material made of spinel Li₂ZnTi₃O₈ nanorods displayed a highly reversible capacity and excellent cycling stability.     

Superior rate capabilities of SnS nanosheet electrodes for Li ion batteries

We report on the self-supported, two-dimensional (2D) SnS nanosheets electrode directly grown on metallic current collectors via non-catalytic and template-free, vapor transport synthetic route. The self-supported SnS nanosheets electrode demonstrates good cycling performance and superior rate capabilities: a capacity of ～380 mAh g^?1 even at 20C rate (after charging for 3 min), larger than the theoretical capacity of the carbon-based electrodes currently used in commercial Li ion batteries. The origin of such an improvement in the long-term cycle stability and electronic/ionic transport kinetics, is understood by means of various microscopic investigation as well as unique characteristics of self-supported nanostructuring strategy itself.     

Preparation and electrochemical characterization of the porous sulfur cathode using a gelatin binder

A novel porous sulfur cathode in which a gelatin was used as the binder was prepared by using a freeze–drying method at −58 °C. The porous structure provides channels for electrolyte infiltration and then facilitates ion diffusion. This porous sulfur cathode has a high initial capacity of 1235 mAh g⁻¹ and a high reversible capacity of 626 mAh g⁻¹ after 50 cycles, both of which are higher than that of the normal cathodes with compact structures.