In situ fabrication of microporous organic network coated capillary column for high resolution gas chromatographic separation of hydrocarbons

Microporous organic networks (MONs) are a new class of porous materials synthesized via Sonogashira coupling reactions between organic building blocks. Here we report an in situ synthesis approach to fabricate MONs coated capillary column for high resolution GC separation of hydrocarbons. The McReynolds constant evaluation reveals the MONs coated capillary is a non‐polar column. The MONs coated capillary column shows good resolution for GC separation of diverse important industrial hydrocarbons such as linear and branched alkanes, alkylbenzenes, pinene isomers, ethylbenzene and styrene, cyclohexane and benzene. The MONs coated capillary column gave a high column efficiency of 1542 plates per meter for hexane and good precision for replicate separations of the selected hydrocarbons with the RSDs of 0.2–0.3, 1.5–3.1, and 1.9–3.3% for retention time, peak height and peak area, respectively. The MONs coated capillary also offered better resolution than commercial Inert Cap‐1 and Inert Cap‐5 capillary columns for hexane and heptane isomers. These results reveal the potential of MONs as novel stationary phases in GC.     

Crosslinked methylphenylsilicones as stationary phases for capillary gas chromatography

Summary Methyl(phenyl)silicones offer useful selectivities when used as stationary phases in gas chromatography (GC). Such phases have, however, hitherto been of restricted importance in capillary GC due to the lack of phases having a viscosity high enough to ensure stationary phase film stability. Further, to utilize fully the possibilities of a methyl(phenyl)silicone capillary column, it must also possess high efficiency and a high degree of deactivation.In this work, the preparation of soda-glass capillary columns coated within situ cured methyl(phenyl) and methyl(tolyl)-silicones is presented. Vulcanization was made possible by the introduction of some vinyl substitution in the gum to be cured: tolyl-containing gums could be cured without the presence of vinyl groups. In addition, fused silica capillary columns coated with OV-1701 were prepared.The columns show a coating efficiency of above 80%, a thermal stability up to 320 °C and a high degree of deactivation. Their utility is demonstrated by the separation of samples containing polynuclear aromatics, antidepressants and some potent mutagens.Presented at the 14th International Symposium on Chromatography London, September, 1982     

Approaches for the coating of capillary columns with highly phenylated stationary phases for high-temperature GC

Two highly phenylated tetramethyl-p-silphenylene-diphenylsiloxane copolymers were coated on fused silica capillary columns and used as stationary phases in GC. The copolymers offered new insights into the coating process and column preparation due to their physicochemical properties. The fused silica capillary surface had to be pretreated in various ways to achieve a homogeneous film and a well deactivated surface: etching with ammonium bifluoride; leaching with sodium hydroxide and hydrochloric acid; silylation with tetraphenyldimethyldisilazane and triphenylsilylamine. Droplet formation was observed on tetraphenyldimethyldisilazane silylated surfaces leading to capillary columns with low separation efficiency. The topology of inhomogeneous films was investigated by light microscopy, scanning electron microscopy, and Auger electron spectroscopy. It became apparent that the stationary phase did not form droplets but islands, which are connected by a wetting layer according to the Stranski-Krastanov growth mode. Both copolymers are potential stationary phases for high-temperature GC with promising properties. They offer a higher overall polarity than 75% phenyl, 25% methyl-polysiloxanes in combination with increased thermal stability and reduced bleed levels.     

Diastereoselective and enantioselective chromatography of the pyrethroid insecticides allethrin and cypermethrin

Summary Liquid and gas chromatographic separations of the pyrethroid insecticides allethrin and cypermethrin have been investigated with various achiral and chiral stationary phases. Diastercomeric and enantiomeric selectivity was observed for cypermethrin on a Pirkle-type chiral LC stationary phase, but very strong interactions and therefore long retention times prevented the separation of allethrin on this phase. Trans-allethrin isomers were separated on a chiral -cyclodextrin RP-HPLC column while cypermethrin showed some difficulties on this phase due to isomerization. Diastereomeric but no enantiomeric selectivity by GC was achieved for cypermethrin with an apolar DB 5 capillary. GC separation of the diastereomers was used to study the selective photodegradation of cypermethrin isomers after forestry applications. Chiral -cyclodextrin-based GC phases showed some enantioselectivity for cis- and trans-allethrin isomers. A separation of the eight isomers into six partially resolved peaks was achieved by GC with a coupled column consisting of chiral permethylated -cyclodextrin and DB 1701 as stationary phases. This combination was used to characterize allethrin formulations intended for indoor use and to investigate allethrin products formed by ozonolysis of thin films of the insecticide.     

Overview of methods for the determination of trans fatty acids by gas chromatography, silver-ion thin-layer chromatography, silver-ion liquid chromatography, and gas chromatography/mass spectrometry

trans Isomers of naturally occurring cis-unsaturated fatty acids are produced when liquid vegetable oils or marine oils are partially hydrogenated to produce margarine, shortenings, and other hardened-fat products. Isomeric trans fatty acids are also formed in the intestinal tract of ruminants, and they appear in small amounts in dairy products and ruminant meat. Currently, satisfactory analyses for the fatty acid profiles of fats containing trans fatty acids are obtained by gas chromatography (GC) using capillary columns coated with highly polar cyanosilicone stationary phases. In capillary GC methods, the key limitation has been the incomplete separation of trans-monoenoic acid isomers from their cis isomers; however, recent reports have demonstrated that improvements in separation are attainable with the use of 100 m columns. In these columns, there is very little overlap of cis and trans isomers. More accurate trans fatty acid analyses can be obtained by coupling GC with either silver-nitrate thin-layer chromatography or silver-nitrate liquid chromatography.     

Comparison of series 5 gas chromatography column performances from a variety of manufacturers for separation of chlorinated dibenzo-p-dioxins and dibenzofurans using high-resolution mass spectrometry

An extended study of seven fused silica capillary gas chromatographic (GC) columns has been conducted with regard to separation of international toxic equivalent factor (I-TEF) isomers (tetra- through octa-chlorinated at 2,3,7,8 positions) of polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans (PCDDs/PCDFs) from closely co-eluted other isomers using high-resolution gas chromatography-high-resolution mass spectrometry (HRGC-HRMS). The data are explicated in mass chromatograms of Series 5 GC columns from a variety of manufacturers (Varian CP-Sil 8 CB LowBleed/MS, Phenomenex ZB-5UMS, Agilent HP-5MS, Restek Rtx-5MS, Supelco Equity-5, J&W Scientific DB-5 and DB-5MS), according to relative retention times, and 2,3,7,8-substituted isomer concentrations for each of the columns tested. Results showed differences between 5% phenyl methyl silicone and 5% silphenylene (Si-arylene) silicone polymer type GC stationary phases in separation of 2,3,7,8-substituted PCDDs/PCDFs from closely co-eluted isomers. The separation differences for Si-arylene type columns resulted in lower toxic equivalence (TEQ) values compared to the siloxane-based columns. Because of differences in product nomenclature and manufacturing practices by various manufacturers, incorrect assumptions and comparisons may be made regarding the interchangeability of these columns for PCCD/PCDF separations. The data presented are the most comprehensive to date and provide a valuable addition to operational criteria for the standard US Environmental Protection Agency methods 1613b and 8290.     

Preparation of thermostable,phenyl silicone coated,glass capillary columns for separation of polyaromatic hydrocarbons

Summary A procedure for the preparation of glass capillary columns coated with non-extractable phenyl polysiloxanes has been developed, the phenyl silicone being synthesised in situ in the column. The non-extractability can be explained in terms of a certain degree of crosslinking in the polymer and possibly also by some chemical bonding to the capillary glass wall. Rearrangement of the film at higher temperatures is counteracted by crosslinking in the phase. Column bleeding is thus decreased, and column efficiency is maintained even at higher temperatures. Such capillary columns showed suitable selectivities for separation of polyaromatic hydrocarbons, and the high temperatures necessary for these analyses could be attained.     

Evaluation of New Stationary Phases for the Separation of Fatty Acid Methyl Esters

In the analysis of fatty acids, one of the most commonly used tools is a GC separation of the fatty acid methyl esters (FAME). Many researchers perform this separation using a non-polar phase such the ubiquitous 5% phenyl / 95% methyl capillary columns found in most every chromatography laboratory. Numerous laboratories have also turned recently to polar phases such as 70% cyanopropyl columns, as this type of chemistry provides increased selectivity for unsaturated compounds, and thus improved separation of cis/trans and ω³/ω⁶ FAME isomers. Here, a series of columns nominally having 60, 70, 80, and 90% bis-cyanopropyl content have been tested for the separation of FAME isomers. Trends in retention and the influence of increasing phase polarity on effective and fractional chain lengths are highlighted to provide the FAME chromatographer with insight into which of these novel stationary phases might be best suited to their particular application. In addition, the elution temperatures (T_e) of the FAME and linear alkane standards are presented, as this information will be of value to comprehensive two-dimensional multidimensional GC (GC × GC) users who wish to use these columns in the primary dimension separation.     

气相色谱近年的发展

简要阐述了近几年气相色谱(GC)的发展和特点。GC是一个成熟的技术,广泛地应用于各个领域,近几年GC的发展除了继续研究新的固定相和高性能的毛细管色谱柱之外,主要在全二维气相色谱(GC×GC)、快速GC、便携式GC仪和微型GC仪几个方面。近几年新研究的GC固定相主要集中在常温离子液体和各种环糊精的衍生物。现在GC研究者趋向于使用商品化的GC毛细管柱,而商品化的GC毛细管柱应用最多的是以含5%苯基的聚甲基硅氧烷为固定相的色谱柱。GC×GC发展迅猛,特别是关于调制器的研究,已开发出十多种调制模式,并广泛地应用于各个领域。为了适应大量样品的分析和现场分析,研究和开发了多种快速GC方法和仪器以及便携式GC仪。为了仪器的小型化和专属性检测,μGC仪的研究也稳步地发展起来。     

Gas chromatographic properties of common cholesterol and phytosterol oxidation products

The most common cholesterol and phytosterol oxidation products found in foodstuffs or biological matrices are the 7alpha- and 7beta-hydroxysterol, 7-ketosterol, 5alpha,6alpha- and 5beta,6beta-epoxysterol, and triol derivatives of sterols. This study focused on the preparation and purification of such products derived from campesterol, stigmasterol and beta-sitosterol. The identity of the substances was confirmed by mass spectroscopic analysis. The elution order of a complex mixture composed of the 7alpha- and 7beta-hydroxysterol, 7-ketosterol, 5alpha,6alpha- and 5beta,6beta-epoxysterol, and triol derivatives of cholesterol, campesterol, stigmasterol and beta-sitosterol was recorded on an apolar as well as a medium-polarity capillary column in relation to two commonly used internal standards, i.e. alpha-cholestane and 19-hydroxy cholesterol. Flame-ionization detector as well as mass spectrometry response factors were derived from a gravimetrically prepared mixture of commercially available cholesterol oxide standards. It was proven that the ionization efficiency of cholesterol and phytosterol oxides are very similar and that response factors obtained for cholesterol oxidation products are also valid for quantitative work regarding phytosterol oxidation products.     

GC／MS法测定木香挥发油化学成分

用气相色谱-质谱法对木香挥发油进行化学成分的分析。采用水蒸气馏法从木香中提取挥发油。试用不同类型的毛细管柱进行分析,找出最佳分析条件,用归一化法测定其含量,并用气相色谱-质谱法对化学成分进行鉴定。共鉴定了38个成分,占挥发油总成分的86%以上。方法稳定可靠。重现性好,适用于中药挥发油的化学成分分析。     

Dual Fiber-In-capillary Annular Column with Ternary Stationary Phase for Gas Chromatographic Separation

In the present work a novel strategy for improving and/or tuning the selectivity of gas chromatographic (GC) separation by combining three different stationary phases (SPs) without premixing was introduced. A fused silica fiber coated with polydimethylsiloxane (SE30) and another coated with cyanopropylphenylmethylpolysiloxane (OV1701) were serially inserted into an 8-m polyethylene glycol 20 M (PEG20M) capillary column to form a GC annular column with ternary SP, abbreviating as SE30-OV1701-CF/PEG20M-CC. The separation capability of this ternary SP annular column was compared with a SE30-coated fiber-in-PEG20M-coated capillary annular column and a PEG20M-coated open tubular column by a test mixture of 19 organic compounds. Among these three columns, SE30-OV1701-CF/PEG20M-CC produced the best separation when the SE30-coated fiber and OV1701-coated fiber was 3 and 5 m, respectively. Selectivity can be easily tuned by changing the length of the SP-coated fibers in the ternary SP annular column. The proposed ternary SP annular column shows additional tunability, thus making it a promising tool for separation of organic solvents that are often used in the manufacturing process of pharmaceutical formulations and lacquer thinners.     

Determination of 2-ethylhexyl nitrate in diesel fuel

The aim of this study was to develop and validate fast and easily applicable GC/MS assay for the quantification of the substance that increases cetane number in diesel fuel (2-ethylhexylnitrate, 2-EHN). These requirements were fulfilled best by a headspace GC-MS assay with negative chemical ionization with methane (HS-GC/MS). Chromatographic separation is achieved using a DB5-MS capillary column after the addition of known amount of internal standard (o-nitrotoluene). The limit of detection was 0.009% v/v for 2-EHN and the limit of quantification was 0.03% v/v. The HS-GC/MS method was applied for the quantification of cetane improver in spiked diesel fuel and real diesel fuel. The method is linear over the studied range (0.03-0.3%, v/v), with satisfactory intra- and inter-assay precision, and the relative standard deviations are lower than 10%. Good accuracy is achieved with bias <10% at all levels tested.     

Einsatz von Hochleistungs-Trennkapillaren in der GC.-EIMS./GC.-CIMS.-Analyse: Eine Möglichkeit zur massenspektrometrischen Doppelbindungscharakterisierung in komplexen Monoalkengemischen

In an attempt to determine position and substitution of double bonds in complex mixtures of straight-chain and branched monoalkenes without actually isolating the constituents, GC.-MS. analysis is performed after in-batch preparation of derivatives of a judiciously chosen type. Cyclic phenylboronates (4,5-substituted 2-phenyl-1,3,2-dioxaborols) are prepared from 1,2-diols which are, in turn, obtained from the original alkenes by treatment with osmium tetroxide. Chemical ionization mass spectrometry (CIMS.) is used in addition to conventional electron impact techniques (EIMS.) in sequential GC./CIMS.- and GC./EIMS.runs, yielding complementary structural information for the single components of the mixture. In order to cope with the potential severity of the separation problem, high-efficiency glass capillary columns were employed throughout. The performance of the system used is demonstrated by a complete double bond analysis of a 35-component mixture of monoalkenes in the C₅ to C₉ range.     

纤维素衍生物作为毛细管气相色谱新型固定相的研究

以纤维素三苯甲酸酯、纤维素三苯基氨基甲酸酯以及二者的混合物为固定相,制备了新型毛细管气相色谱柱,最高柱效达到2580板/米。其能对一些难分离物质对、位置异构体以及手性化合物进行拆分,如对丙氨酸的分离因子可达到1·13。此外,还研究了毛细管柱的极性、选择性以及保留机理。结果表明,该类聚合物是一类很有前景的新型气相色谱固定相。     

Comparison of two-stage retention index monitoring capillary gas chromatography and selected ion monitoring capillary gas chromatography – mass spectrometry as analytical tools

Two-stage capillary GC with two-stage retention index monitoring is an efficient analytical technique which can be used for detection and determination of small amounts of volatile compounds in complex mixtures of hundreds or thousands of other compounds. The system employs two capillary columns, coated with different stationary phases, connected on-line with the aid of a micro valve; the first column acts as a pre-separating unit from which unresolved fractions of interest are cut (transferred) into another column for final, interference-free separation of the compounds to be determined. This technique has been compared with selected ion monitoring capillary GC-MS using a hydrocarbon mixture as a test sample for comparing resolution, repeatability, and the practical usefulness of the techniques. Results indicate that two-stage capillary GC is very useful for mixtures containing compounds which produce mostly non-specific ions in the MS ion source whereas compounds producing specific ions can be easily analyzed by capillary GC – single ion monitoring MS even if they are not perfectly separated by a single capillary column.     

Glass capillary gas chromatography-mass spectrometry at high temperatures. direct analysis of free base porphyrins and metal porphyrin complexes extracted from the serpiano oil shale

This contribution describes GC/MS analysis of natural petroporphyrin extracts containing alkylporphyrins either as vanadyl complexes or as demetalated free bases. The combination of high temperature glass capillary gas chromatography with mass spectrometry allows, for the first time, direct determination of electron impact mass spectra of separated alkylporphyrins, making additional purification and derivatization unnecessary. The separation is carried out on glass capillary columns coated with the high temperature-stable medium polar, OH-terminated, polysiloxane phases PS 086 and OV-225-OH. The paper gives detailed working directions for the preparation of the high temperature GC/MS-interface, and of the high temperature stable OV-225-OH columns (max. working temperature 390°C).     

3,4-二(3-苯氧基-4-氟苯基)-2,5-二苯基苯基接枝聚硅氧烷气相色谱固定相的合成与表征（英文）

合成了一种耐高温的3,4-二(3-苯氧基-4-氟苯基)-2,5-二苯基苯基接枝聚硅氧烷(DPFP)固定相,使用静态涂渍法将其涂渍到毛细管柱内壁上,制成气相色谱柱。分离裂解乙烯的色谱图显示DPFP固定相在360℃时仍具有良好的分离能力。DPFP固定相的柱效为3 324块/米(保留因子(k)4.24,萘,0.25 mm i.d.)。麦克雷诺常数计算结果显示DPFP固定相属中等极性。溶剂化参数模型结果显示DPFP固定相与溶质之间的主要作用力为偶极-诱导偶极作用力、氢键碱性作用力。Grob试剂分离结果显示DPFP色谱柱具有良好的选择性与惰性。另外,芳香族同分异构体、苯取代物、多环芳烃、脂肪酸酯及脂肪醇都得到了良好的分离,表明DPFP固定相在应用方面有巨大的潜力。     

The preparation of non-extractable methylphenylpolysiloxane stationary phases for capillary column gas chromatography

Summary The synthesis of methylphenylpolysiloxane polymers and their use in the preparation of crosslinked, non-extractable stationary phases for fused-silica capillary columns are described. By preparing more viscous phenyl-containing polymers than are commercially available, stationary phase films of these polymers could be efficiently coated on fused-silica capillary columns and stabilized by a free radical crosslinking mechanism using peroxides. Four methylphenylpolysiloxane polymers containing different phenyl concentrations were prepared. These included three polymers containing 50% phenyl and one polymer containing 70% phenyl. Two of the 50% phenyl polymers had one phenyl and one methyl group attached to each silicon atom. One of these also had 1% vinyl incorporated. The third 50% phenyl polymer was synthesized in such a way that one half of the silicon atoms had two phenyl groups attached while the rest contained dimethyl groups. The 70% phenyl polymer also had 4% vinyl incorporated. Due to the intrinsic thermal stability of these phenyl phases and the enhanced film stability achieved by crosslinking, the 70% phenyl phase could be utilized up to 400 °C. Using the methods described in this paper, highly efficient and thermally stable fused silica capillary columns coated with crosslinked methylphenylpolysiloxane stationary phases can be successfully prepared.     

Comparison of high-selectivity gas chromatographic methods, including column switching, for the determination of felodipine in plasma

The selectivity required for the determination of low concentrations of felodipine in plasma was achieved by either mass-selective detection, optimization of stationary phase selectivity or column-switching gas chromatography (GC) with a dual-oven chromatograph, the latter two with electron-capture detection. The three approaches were evaluated in terms of selectivity, detectability, precision and suitability for routine applications with automated injection. Using mass-selective detection, the detectability in plasma samples was limited by the performance of the mass spectrometer. The detection limit (signal-to-noise ratio = 3) was 4.7 pmol (1.8 pg) of felodipine. Pre-concentration of extracts permitted quantitation in plasma down to 0.2 nmol/1. Using electron-capture detection, the detectability was determined by the selectivity and bleeding characteristics of the columns. For single-column separation, a 35% phenyl phase was selected. The detection limit was 3.0 fmol (1.2 pg). The limit of quantitation in plasma was 1 nmol/1. In column-switching GC, bleeding products from the first column will separate on the second column and may interfere in separations for trace analysis. Bleeding products from a 50% phenyl phase (DB-17) were characterised by GC-mass spectrometry. With a dual-column system, employing a DB-17 (50% phenyl) column for selective introduction on to a CP-Sil 5 (0% phenyl) column, the signal-to-noise ratio was limited by the low-bleeding second column, provided that the bleeding products from the first column were adequately separated from felodipine. The detection limit in this instance was significantly lower 0.35 fmol (0.13 pg). Direct injection of plasma extracts permitted quantitation down to 0.4 nmol/l. All three methods were well suited for use with autosamplers.