活性/可控自由基聚合制备恩诺沙星印迹微球及识别性能研究

研究了一种以活性／可控自由基聚合（可逆加成一断裂链转移自由基聚合,reversible addition-fragmentation chain transfer radical polymerization,RAFT polymerization）制备分子印迹微球的方法。结合沉淀聚合法,以二硫代苯甲酸异丙苯酯（cumyl dithiobenzoate,CDB）为可逆加成一断裂链转移剂,恩诺沙星为印迹化合物,甲基丙烯酸（MAA）和乙二醇二甲基丙烯酸酯（EDMA）分别为功能单体和交联剂,偶氮二异丁腈（AIBN）为引发剂,乙腈为分散剂,考察了温度、单体浓度等反应条件对微球制备的影响。通过改变AIBN和CDB的比例,可以达到控制分子印迹微球粒径和分散性的目的。扫描电镜结果显示,以RAFT聚合法得到的分子印迹微球粒径可达2．0～2．2μm,并有良好的分散性。平衡吸附实验结果说明印迹聚合物微球对印迹化合物的结合能力优于非印迹聚合物。分子印迹微球对于恩诺沙星及其结构类似物洛美沙星的饱和吸附量分别为37．3和19．5μmol·g^-1,证明分子印迹微球有很好的识别能力。     

绿原酸印迹均匀微球的制备及其色谱行为研究

以绿原酸为模板,甲基丙烯酸为功能单体,二乙烯基苯为交联剂,采用沉淀聚合法制备了绿原酸印迹均匀微球。探讨了模板及功能单体类型和用量对聚合物颗粒均匀性的影响,考察了流动相组成及柱温对分子印迹柱色谱保留和选择性的影响。绿原酸均匀印迹微球的制备条件为：模板-功能单体-交联剂的用量比为0.375:1.5:7.0,摇瓶转速为15r/min时,微球直径约2.5μm,聚合物收率为35.4%。流动相组成及含水量对印迹聚合物的保留行为影响较大,当用乙腈-水混合物为流动相时,含水量增加,各化合物在印迹色谱柱上的容量因子降低：当流动相含水量高于2.5%,分子印迹聚合物失去选择识别能力;但以0.002mol L_-1磷酸缓冲液(pH3.0)-乙腈混合液为流动相时,分子印迹柱对模板的容量因子、选择性及色谱峰形都有较大改进。当二者体积比为19:1,容量因子高达90.69,其选择性相对于没食子酸和原儿茶酸高达23.10和6.562。温度影响分子印迹聚合物的选择保留能力,当温度从25℃提高到45℃时,印迹聚合物对模板的容量因子从3.52降低到2.41,选择因子降低约30%。     

TNT分子印迹聚合物微球的合成与性能研究

以三硝基甲苯(TNT)为模板分子,EDMA为交联剂,采用沉淀聚合法制备了TNT分子印迹微球.讨论了溶剂用量、模板分子用量、功能单体种类等对分子印迹微球的形貌及吸附性能的影响;利用紫外吸收光谱和BET表征了印迹聚合物微球的结合位点相互作用与印迹孔穴结构;通过平衡吸附和选择性吸附实验,研究了印迹聚合物微球的吸附性能和选择性识别性能.结果表明,以丙烯酰胺为功能单体制备的分子印迹聚合物为规则的球形,内部含有分子印迹孔穴,微球的粒径为1～2μm.印迹聚合物微球可在30 min内达到吸附平衡,在1 mmol/L的TNT乙醇溶液中,印迹聚合物微球的平衡吸附量为32.5 mmol/kg,对TNT分离系数为25.19,具有较好的特异性吸附能力,并可选择性识别TNT分子.     

酮洛芬分子印迹拆分及分离过程热力学研究

利用非共价分子印迹法,采用4-乙烯基吡啶为功能单体,以二甲基丙烯酸乙二 醇酯为交联剂,在模板分子（S）-酮洛芬的存在下,制备出（S）-酮洛芬的分子印 迹聚合物（MIPs）,并用作HPLC固定相,对其进行了高效液相色谱评价。结果表明 外消旋酮洛芬在制备的印迹柱上得到了有效的分离,（S）-酮洛芬的容量因子 k_s'为9.52,选择性因子α为1.52,分离度R为0.88。此外,HPLC分析表明制备的 MIPs能够分离结构相似的酮洛芬、布洛芬和萘普生。研究了流动相中乙酸浓度、流 速及温度对拆分效果的影响,测定了分离过程中的焓变、熵变和自由能变化,对分 子印迹分离过程作了进一步解释。     

L-组氨酸手性识别印迹固定相的制备及表征

以L-组氨酸为模板分子, 甲基丙烯酸为功能单体, 乙二醇二甲基丙烯酸酯为交联剂, 偶氮二异丁腈为引发剂, 在水-乙腈微乳体系中采用沉淀聚合方法制备了具有手性识别L-组氨酸功能的印迹微球. 采用静态平衡吸附实验及色谱分析探讨聚合微球对模板分子的选择识别吸附性能. 结果表明, 该印迹聚合物微球对模板分子存在两种结合位点, 最大表观结合量分别为33.04和24.16 μmol/g. 相对于常规的C18柱, 该印迹聚合物填充柱能够完全分离L-组氨酸和D-组氨酸, 分离度R为2.23, 选择因子为2.14. 利用差热分析、红外光谱及X射线衍射等技术表征聚合物微球的热性能及结构. 结果表明, 聚合物微球具有良好的热稳定性, 是一种具有部分晶体结构的聚合物.     

绿原酸印迹微球的制备及其色谱行为研究

以绿原酸为模板,甲基丙烯酸为功能单体,二乙烯苯为交联剂,采用沉淀聚合法制备了绿原酸印迹微球。探讨了模板及功能单体类型和用量对聚合物颗粒均匀性的影响,考察了流动相组成及柱温对分子印迹柱色谱保留和选择性的影响。绿原酸印迹微球的制备条件为:模板-功能单体-交联剂的用量比为0.375∶1.5∶7.0,摇瓶转速为15r/min时,微球直径约2.5μm,聚合物收率为35.4%。流动相组成及含水量对印迹聚合物的保留行为影响较大,当用乙腈-水混合物为流动相时,含水量增加,各化合物在印迹色谱柱上的保留因子降低:当流动相含水量高于2.5%,分子印迹聚合物失去选择识别能力;但以0.002mol/L磷酸缓冲液(p H3.0)-乙腈混合液为流动相时,分子印迹柱对模板的保留因子、选择性及色谱峰形都有较大改进。当二者体积比为19∶1,保留因子高达90.69,其选择性相对于没食子酸和原儿茶酸高达23.10和6.562。温度影响分子印迹聚合物的选择保留能力,当温度从25℃提高到45℃时,印迹聚合物对模板的保留因子从3.52降低到2.41,选择性因子降低约30%。     

反乌头酸分子印迹聚合物微球的制备及其分子识别功能

以乙腈为分散剂,采用沉淀聚合法合成了反乌头酸分子印迹聚合物微球。研究了合成反应条件对聚合物形貌的影响,发现聚合前主客体氢键络合物和功能单体氢键低聚体是控制微球形成及其粒径大小的关键因素。通过振荡吸附法对聚合物的结合特性进行了评价,发现印迹聚合物微球对模板分子的识别选择性优于块状印迹聚合物和非印迹聚合物。     

沉淀聚合法制备三聚氰胺分子印迹聚合物微球

以三聚氰胺为模板分子,以甲基丙烯酸为功能单体,乙二醇二甲基丙烯酸酯为交联剂,在乙腈-乙二醇(20∶1,V/V)混合溶剂中沉淀聚合制备了分子印迹聚合物微球.利用1H-NMR和紫外光谱方法研究了模板与功能单体相互作用情况.结果表明,三聚氰胺与甲基丙烯酸(MAA)分子通过协同氢键作用形成1∶2型氢键配合物.利用扫描电镜和红外光谱对聚合物微球的结构进行了表征.结果表明,印迹聚合物近似圆球形,粒径约为400～500 nm,且大于非印迹聚合物微球,表面存在大量的结合位点.通过静态平衡吸附实验研究了聚合物微球对模板分子的结合能力,印迹聚合物微球在4 h后逐渐达到吸附平衡,Scatchard分析表明,印迹聚合物微球主要存在两类不同的结合位点,最大表观结合量(Qmax)和平衡离解常数(Kd)分别为Qmax1=22.97μmol/g,Kd1=0.14×10-3 mol/L;Qmax2=157.65μmol/g,Kd2=2.55×10-3 mol/L,计算得出表观印迹效率和有效印迹效率分别为68%和58%.此方法合成的印迹聚合物微球对三聚氰胺有较好的结合性能,可应用于三聚氰胺的分离检测.     

S-布洛芬磁性分子印迹膜的吸附及拆分性能

以S-布洛芬为模板分子、3-氨丙基三乙氧基硅烷为功能单体、正硅酸乙酯为交联剂,采用溶胶凝胶法成功制备了对S-布洛芬具有特异选择识别功能的磁性分子印迹聚合物,并且分别采用红外(IR)光谱、扫描电镜(SEM)、X射线粉末衍射(XRD)对其结构进行了表征.通过紫外(UV)光谱研究了其对S-布洛芬的吸附性能,并且建立了高效液相色谱(HPLC)手性流动相法研究其对布洛芬的拆分.结果表明,该磁性分子印迹聚合物具有良好的磁响应性,在外加磁场下可实现快速分离;S-布洛芬分子印迹复合膜对S-布洛芬具有较好的选择结合性,其结合量达到68.3mg/g;每100mg复合膜可使外消旋布洛芬的分离度增加2.1%.     

沉淀聚合法制备右旋邻氯扁桃酸分子印迹聚合物微球

以右旋邻氯扁桃酸为模板,丙烯酰胺、乙二醇二甲基丙烯酸酯分别为功能单体和交联剂,采用沉淀聚合法制备了分子印迹聚合物微球,讨论了反应介质用量、聚合温度、引发剂的种类和用量对印迹微球的影响。实验表明：分子印迹微球与传统本体聚合法制备的聚合物相比具有更高的特异识别能力,通过Scatchard分析研究了聚合物的选择结合性能,结果表明分子印迹聚合物微球在识别右旋邻氯扁桃酸分子的过程中存枉两类结合位点,而空白聚合物微球只存在一类结合位点。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Microwave-assisted copper-catalyzed stereoselective ring expansion of three-membered heterocycles with α-diazo-β-dicarbonyl compounds

Microwave-assisted copper-catalyzed ring expansions of three-membered heterocycles with α-diazo-β-dicarbonyl compounds were investigated. Thiiranes generated 3-acyl-5,6-dihydro-1,4-oxathiines in the presence of copper sulfate and trans-3-acyl-5,6-dihydro-1,4-oxathiines as stereospecific products for 1,2-disubstituted cis-thiiranes through an intramolecular S_N2 process. Oxiranes gave rise to 2-acyl-5,6-dihydro-1,4-dioxines under the catalysis of copper hexafluoroacetylacetonate and cis-3-acyl-5,6-dihydro-1,4-dioxines as stereospecific products for 1,2-disubstituted cis-oxiranes via an intimate ion-pair mechanism. The current method provides a direct and simple strategy in efficient preparation of 3-acyl-5,6-dihydro-1,4-oxathiines and 2-acyl-5,6-dihydro-1,4-dioxines, important agents in medicinal and agricultural chemistry, from readily available thiiranes and oxiranes, respectively.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.