剪切作用对功能聚合物微观结构性能的影响研究

梳型聚合物和活性聚合物是目前常用驱油聚合物,其增黏性和黏弹性是评价其驱油能力的重要指标.为考察剪切作用对两种聚合物溶液性能的影响,分别研究了梳型聚合物和活性聚合物溶液经过模拟炮眼剪切前后的宏观和微观性能变化.结果表明,在高速剪切、拉伸应力作用下,梳型聚合物黏度损失率为40.73%,活性聚合物黏度损失率为70.10%;当剪切频率为0.02 Hz时,梳型聚合物界面扩张弹性降低了19.03%,而活性聚合物界面扩张弹性降低了68.03%;相比活性聚合物,梳型聚合物紧密的空间网状结构虽被部分破坏,但仍有疏松的网络结构,且以聚集体的形式紧密地分散在溶液中,通过DLS及AFM测定表明其粒径尺寸稍有变小;可见梳型聚合物抗剪切能力较活性聚合物强.     

梳状聚合物研究进展

梳状聚合物是一类具有高接枝密度的接枝型共聚物。由于高密度接枝的侧链之间相互排斥,导致梳状聚合物主链被迫伸直,整个梳状聚合物表现出棒状构象。同时,相比于一般线形聚合物而言,梳状聚合物分子量较容易达到很高,形成几十到上百纳米尺寸的结构,因此有着广泛的应用前景。目前,人们对于梳状聚合物的研究集中于其合成、结构以及性能等领域,其中主要基于对柔性侧链、柔性主链梳状聚合物的研究。本文对于梳状聚合物的合成、刚性主链和刚性侧链梳状聚合物发展现状以及梳状聚合物的性质和应用进行了总结。     

聚合物固体电解质研究进展

本文概述近十几年来聚合物固体电解质材料开发研究的状况,包括线型高分子、为改进性能而发展起来的枝型、梳型及交联型高分子,并对高分子与金属盐络合的离子聚合物结构和性能作了描述。阐述了高分子固体电解质的导电行为、导电模型及导电机理。对聚合物固体电解质的各种应用作了介绍并简要讨论了高分子固体电解质的发展趋向及前景。     

EVOH梳型单离子聚合物的合成及其离子电导电性质

EVOH梳型单离子聚合物的合成及其离子电导电性质;梳型聚合物;聚合物电解质;交流阻抗谱     

可逆加成-断裂链转移自由基聚合法合成梳型磺化聚醚醚酮

以带双硫酯取代基聚醚醚酮为大分子链转移剂, 采用可逆加成-断裂链转移自由基聚合(RAFT)法合成不同接枝率的磺化聚醚醚酮(g-SPEEK), 并对其结构进行表征. 在单体/链转移剂/引发剂的投料比(摩尔比)为50:4:1, 温度为70 ℃, 反应24 h, 得到聚合物膜的离子交换容量和吸水率分别为1.312 mmol/g和43.51%, 其溶胀率为5.05%, 低于Nafion膜的11.50%. 热重分析(TGA)结果表明该梳型g-SPEEK具有较好的热力学稳定性, 且该聚合物膜具有与Nafion膜相当的抗氧化性. 在相同的离子交换容量下, 梳型g-SPEEK比主链型SPEEK具有更好的H⁺离子透过性能.     

以聚苯乙烯为把的聚四氢呋喃(PTHF)梳型聚合物的制备

高分子的自组装已成为当今高分子科学的热门研究课题之一[1] .开展该研究工作 ,首先要获得特定结构的聚合物 .我们设计合成如图 1所示的梳型聚合物 ,调节制备Ａ ,Ｂ ,Ｃ三链段所用的单体和它们的聚合度等参数 ,并进一步进行自组装研究 .若Ａ段是结晶聚合物 ,且熔融温度低于Ｃ段的玻璃化转变温度 ,则在定型储能材料等方面具有应用前景 .合成梳型嵌段聚合物有三个方法 ,即发散 (Ｇｒａｆｔｆｒｏｍ) ,收敛 (Ｇｒａｆｔｔｏ)和大分子方法 .采用大分子技术 ,每个梳型链长及支化密度可控 ,一直是人们青睐的方法[2 ] .一般采用与普通烯类单体共聚…     

光敏感双亲性梳状SMA聚合物的合成及其胶束化

以含香豆素型苯乙烯类光敏单体(coumarin-containing styrene monomer, CS)与苯乙烯(St)、马来酸酐(MA)为反应单体, 以偶氮二异丁腈(AIBN)为引发剂制备了光敏感三元苯乙烯-马来酸酐共聚物(SMA)双亲交替聚合物P(St/CS-alt-MA), 再利用羧酸酐基元与正辛胺的室温胺解反应获得光敏感双亲性梳状聚合物P(St/CS-alt-MAA8). 用傅立叶变换红外光谱(FTIR)、凝胶渗透色谱(GPC)、1H核磁共振(1H-NMR)等对该双亲梳状聚合物进行结构表征. 通过香豆素基元的光二聚作用, 使梳状聚合物溶解在DMSO中进行光照预交联; 非交联与预交联聚合物分别在选择性溶剂中自组装形成胶束; 利用羧酸基元与NaOH的离子化作用改变聚合物胶束的亲疏水性质. 动态激光光散射(DLS)与芘荧光探针实验表明预交联聚合物胶束较非交联胶束粒径大, 负载芘的能力强; 离子化作用使聚合物胶束解离重组成粒径更小的胶束, 但预交联胶束较非交联胶束小, 离子化后胶束疏水微区更加紧密, 负载芘的能力也增大.     

可还原降解梳形阳离子聚合物的合成

通过缩合聚合和可逆加成-断裂链转移聚合(RAFT)合成了一种新型可还原降解的梳形聚阳离子.首先,以具有化学选择性的三氟甲磺酸钪催化苹果酸、二硫二丙酸、癸二醇的三元缩合聚合得到了含多个侧羟基的聚(苹果酸-co-二硫二丙酸)癸二酯;将羟基酯化修饰为双硫酯后,通过甲基丙烯酸二甲氨基乙酯(DMAEMA)的RAFT聚合制备了梳型聚甲基丙烯酸二甲氨基乙酯(PDMAEMA).采用1H-NMR和GPC等测试方法对该聚合物进行结构表征.该梳形阳离子聚合物在还原性环境中可通过双硫键的断裂降解成为小分子量PDMAEMA低聚物.     

梳形抗盐聚合物在聚合物驱油中的应用

三次采油技术已成为我国提高原油采收率的主要措施之一。研制新型高效驱油用聚合物是降低成本,提高采油量的关键。目前国内外研制的新型高效驱油用聚合物主要为两性聚合物、耐温耐盐单体共聚物、疏水缔合聚合物、复合(或多元组合)型聚合物、共混聚合物和梳形聚合物等。     

聚苯乙烯微球表面的聚集态结构和苯基堆砌

用扫描隧道显微镜(STM)研究微乳液聚合法制备的聚苯乙烯微球.STM图像显示这种聚苯乙烯微球的表面具有不同的聚集态结构.在表面的某些区域,聚合物链没有相互缠结现象,而是有序地堆积在一起.在适当的情况下,同一条链上的苯基还会堆砌起来,形成一种平行移位的结构,其类似于苯双分子的最稳定结构.还用STM研究了用苯溶胀过的聚苯乙烯粒子,并观察到了类似螺旋结构的聚合物链以及扭曲的聚合物链.在聚苯乙烯微球中,聚合物链段和苯基的有序堆砌状态的存在,是因为苯乙烯单体已经在微乳液内的某些区域堆砌成有序的状态.     

Effect of polymer size and chain length on depletion interactions between two colloids

A density functional theory based on the weighted density has been developed to investigate the depletion interactions between two colloids immersed in a bath of the binary polymer mixtures, where the colloids are modeled as hard spheres and the polymers as freely jointed tangent hard-sphere chain mixtures. The theoretical calculations for the depletion forces between two colloids induced by the polymer are in good agreement with the computer simulations. The effects of polymer packing fraction, degree of polymerization, polymer/polymer size ratio, colloid/polymer size ratio on the depletion interactions, and colloid-colloid second virial coefficient B2 due to polymer-mediated interactions have been studied. With increasing the polymer packing fraction, the depletion interaction becomes more long ranged and the attractive interaction near the colloid becomes deeper. The effect of degree polymerization shows that the long chain gives a more stable dispersion for colloids rather than the short chain. The strong effective colloid-colloid attraction appears for the large colloid/polymer and polymer/polymer size ratio. The location of maximum repulsion Rmax is found to appear Rmax approximately sigmac+Rg2 for the low polymer packing fraction and this is shifted to smaller separation Rmax approximately sigmac+sigmap2 with increasing the polymer packing fraction, where sigmap2 and Rg2 are the small-particle diameter and the radius of gyration of the polymer with the small-particle diameter, respectively.     

新型大孔硅质酰胺型聚合物键合相的制备及其对蛋白质的分离

大孔硅胶与乙烯基硅烷反应后,再与甲基丙烯酰胺和二乙烯基苯共聚成一种新型分离蛋白质的色谱柱填料。考察了这种色谱填料对蛋白质的分离能力,认为其具有柱效高、惰性好和分离效率高的优点,聚合物键合相的制备重复性好。并探讨了流动相中离子强度和ｐＨ值对蛋白质分离的影响。     

Side‐chain effect of octa‐substituted POSS fillers on refraction in polymer composites

To investigate the relationship between the chemical structures of the side chains of polyoctahedral oligomeric silsesquioxanes (POSS) fillers and the ability to decrease the refractive indices of the polymer composites, we examined the influence on the degree of polymer chain packing by the existence of the octa‐substituted POSS derivatives. The polymer composites containing methyl‐, ethyl‐, vinyl‐, isobutyl‐, octyl‐, octadecyl‐, cyclopentyl‐, and phenyl‐substituted POSS in poly(methyl methacrylate) (PMMA) were prepared. The packing coefficients of the PMMA composites containing POSS derivatives were evaluated from molar refractions and refractive indices of the films with the Lorentz–Lorenz equation. We found that the ethyl group shows the lowest values of the packing coefficients and a significant effect in reducing the refractive indices of the polymer composites. Finally, in summary, it was shown that POSS molecules can intrinsically offer to reduce a packing. In addition, less entanglement and smaller interactions between polymer chains and the substitution groups are favorable to release a packing, resulting in decreases in refractive indices. Our findings described here are the first efforts to quantitatively evaluate the ability of POSS fillers to lower refractive indices at the molecular level. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Internal Architecture of Zwitterionic Polymer Brushes Regulates Nonfouling Properties

In this work, we study how film thickness and chain packing density affect the protein‐resistant properties of polymer brushes in complex media. Polymer brushes based on dual‐functional poly(carboxybetaine acrylamide) (pCB) were prepared via surface‐initiated photoiniferter‐mediated polymerization. By adjusting UV radiation time and solvent polarity, pCB films with different thicknesses can be achieved and characterized using an ellipsometer. The packing density of pCB polymer chains is directly related to the swelling ratio of swollen to collapsed film thicknesses. Results showed that the dry film thickness alone, used often in the literature, is not sufficient to correlate with nonfouling properties and the chain packing density must be considered for the design of nonfouling surface coatings.     

阻隔氧塑料包装薄膜处理工艺及进展

食品包装需要氧气阻隔性能优异的包装材料以延长产品的货架寿命。综述了目前常用的阻隔氧薄膜研制与生产技术的进展。     

一种包覆型聚合物高效液相色谱固定相的制备与评价

当代应用最广的HPLC固定相中,硅胶基质填料化学稳定性较低,并且由于残存硅羟基而表现所谓第二效应,特别使碱性化合物的峰形拖尾;聚合物基质填料虽提高了化学稳定性,没有离子基团,但刚性降低,并且由于溶胀难于进行梯度淋洗;面包覆型聚合物填料则可综合二者的优点,本文对我们制备的这种固定相作初步报道。     

Nonlinear optical constants of polymers from molecular hyperpolarizabilities of donor–acceptor molecules

A mathematical analysis previously developed to solve the quadratic tensor equations that relate molecular hyperpolarizability and bulk medium nonlinear optical constants is applied to donor–acceptor polyene molecules. The focus is on mutual polarization of spatially organized collections of molecules, e.g., chromophore side chains in an optical polymer. The performance of the electrostatic model is first confirmed by comparison with MOPAC calculations of composite molecules containing a pair of chromophores, and then applied to linear polymer chains as well as lattices in two and three dimensions. An optimal chromophore packing density is determined to maximize the macroscopic susceptibilities of polymer materials of the type studied. This is lower than the density allowed by the structure of the polymer, because of the mutual depolarization of chromophores at high packing densities. © 2005 Wiley Periodicals, Inc. Int J Quantum Chem, 2005     

含酯基包覆聚合物液相色谱柱填料

以丙烯酸甲酯或辛酯和二乙烯苯为原料，在溶液中用游离基聚合法制备了一系列含酯基包覆聚合物反相液相色谱柱填料．用傅立叶红外光谱、电子显微镜和元素分析鉴定了聚合物层，并评价了诸如硅羟基、柱压降、柱效和峰对称性等特性．该类填料适合于含氨基和羟基化合物的分离，作为应用实例，对洛伐他汀（Lovastatin）的分析展示其优良的色谱性能。     

Brownian dynamics simulations of associating diblock copolymers

A novel coarse-grained computational model for associating polymers is proposed that is based on a Gaussian "blob" representation of the polymer chains. The model allows a large number of model polymers to be simulated at moderate computational cost over a wide packing fraction range using the Brownian dynamics, BD, technique. The attraction of the hydrophobic part of the polymer to those on other molecules can lead to strong aggregation of the polymer molecules in real systems, and this is included in the model by an attractive potential felt by the Gaussian blobs to a common "nodal" point that represents the center of the micelle. Attention here is confined to model AB diblock copolymers in which the hydrophilic block, A, has a much higher mass than the hydrophobic moiety, B, which leads to relatively small aggregation numbers, Nagg, of approximately 8. The aggregation number at low packing fractions is found to increase with packing fraction, as observed in experiments, with a functional form that closely follows a simple theory derived here that is based on entropy-derived mean-field terms for the free-energy change associated with the incorporation of the polymer molecule into the micelle. The computational model exhibits an extremely low critical micelle concentration (cmc), and micelles with Nagg approximately 5 are observed at the lowest packing fractions, phi, simulated ( approximately 10-4), which is consistent with experiment. The long-time self-diffusion coefficient of the polymers (and hence micelles) decreases logarithmically with packing fraction, and the viscosity increased with concentration according to the Huggins equation. The spherical blob coarse graining results in the simulable time scales being longer than the Rouse time of the chain, and hence for the nonassociating polymers the intrinsic viscosity is an input parameter in the model. The introduction of association leads to the partial inclusion of the intrinsic viscosity in the simulation and has an effect on the computed Huggins coefficient, kH, which is found to be approximately 6 in those cases.     

Polymer-particle mixtures: depletion and packing effects

The structure of polymers in the vicinity of spherical colloids is investigated by Monte Carlo simulations and integral equation theory. Polymers are represented by a simple bead-spring model; only repulsive Lennard-Jones interactions are taken into account. Using advanced trial moves that alter chain connectivity, depletion and packing effects are analyzed as a function of chain length and density, both at the bond and the chain level. Chain ends segregate to the colloidal surface and polymer bonds orient parallel to it. In the dilute regime, the polymer chain length governs the range of depletion and has a negligible influence on monomer packing in dense polymer melts. Polymers adopt an ellipsoidal shape, with the larger axis parallel to the surface of the particle, as they approach larger colloids. The dimensions are perturbed within the range of the depletion layer.