面向复杂地形的四足机器人步态生成方法

为实现四足机器人在凹凸地形上稳定运动并能选择最大步长的目的,提出了基于稳定裕度的步态规划方法。基于研究对象,建立四足机器人的运动学方程及逆运动学方程,将机器人足端的位置映射为各关节的关节变量;提出工作空间矩阵的概念,将所需克服的地形高度反映到工作空间矩阵中,并选择最优步态区域;依据四足机器人的立足点在质心坐标系下的空间坐标,以纵向稳定裕度为约束条件,在工作空间矩阵中计算机器人摆动腿的最大步长并规划机械腿的运动轨迹;针对所提出的方法,分别利用MATLAB和ADAMS进行仿真验证。在MATLAB环境中计算并验证质心的水平投影是否在立足点形成支撑多变形内,而ADAMS平台分析机器人在复杂地形上的位移变化及姿态变化。仿真结果表明机器人的质心始终在支撑多边形内,机器人的躯干姿态基本保持不变且运动速度匀速,所提出的方法能够保证机器人稳定行走,为四足机器人的稳定运动提出依据。     

PtMn/Co多层膜的磁光特性研究

采用磁控溅射法制备了一系列的Mn掺杂的PtMn/Co多层膜.通过测量得到的磁光常数和光学常 数,计算介电张量的对角元和非对角元,得到在掺杂较大时,克尔角的变化是由于介电张量 的非对角元引起的;在掺杂量较小时,克尔角的变化是由介电张量的对角元和非对角元以及 光学常数的变化引起的.     

基于虚拟样机技术的四足机器人静态稳定步态规划

针对现有技术文献中广泛使用的多种静态稳定步态中速度稳定性与稳定裕度不可兼得的通病,在随动质心的静态步态基础上,利用参数化坐标变换矩阵方法规划出一种四足机器人前进过程中质心以曲线轨迹移动的静态步态方法,使该步态方法以连续性速度运动的过程中保证一定稳定裕度。通过D-H法求得四足机器人的逆运动学坐标变换矩阵,分别在三维空间中对四足机器人的四组足端轨迹方程进行规划,并带入MATLAB软件后以逆运动学方程计算出关节夹角驱动方程,利用步态规划图求出机器人四条腿各自对应的夹角驱动方程以及机体质心轨迹方程。最后在MSC.ADAMS软件中建立四足机器人虚拟样机并对规划的步态进行虚拟仿真,仿真结果验证了该步态对提升四足机器人对于速度连续性以及稳定裕度的提升。     

液压驱动型四足机器人电液伺服控制系统仿真建模与实验分析

复杂的作业环境和艰巨的作业任务使液压驱动型四足机器人对其伺服系统的精度、速度和力量均比一般机器人在普通情况下有更高的要求。为掌握液压驱动型四足机器人在多种路况下行走时各液压缸的受力情况以及液压系统内流量、压力的变化情况,需要对其虚拟样机进行机械动力系统和液压伺服系统的联合仿真,定性分析电液伺服系统位置、速度等被控对象的特性,并分析PID控制器在四足机器人伺服控制方面的特性与不足。针对传统控制算法在四足机器人控制存在的短板问题,设计了一种非对称前馈补偿模糊自适应PID算法,并利用物理样机进行了实际验证。实验结果为四足机器人电液伺服控制系统硬件、软件和控制算法的设计与优化指明了方向,还为研究四足机器人平稳步态控制策略提供了决策依据和数据支持。     

感应电压叠加装置中角向传输线阻抗计算

在进行感应电压叠加装置设计时, 为了使初级脉冲形成与传输系统产生的快前沿高压脉冲均匀耦合到次级传输线, 需要建立感应腔的二维电路模型对电磁波在角向传输线中的传播过程进行分析, 并基于电路计算结果优化设计角向传输线阻抗分布规律,使次级传输线中电流能够均匀分布。由于角向传输线结构复杂, 没有精确求解阻抗值的解析公式, 介绍了一种基于电报方程和瞬态电磁场仿真求解复杂结构传输线阻抗值的方法, 采用该方法对等宽度和变化宽度两种结构角向传输线阻抗值进行了评估。研究结果表明,相比于三平板传输线阻抗计算公式, 采用微带传输线阻抗计算公式对角向传输线阻抗值进行求解结果更加精确。     

一种新的双足机器人模型设计与相关研究

针对双足机器人最简模型在行走过程中出现摆动腿足部擦地的问题,提出了一种通过摆动腿膝关节弯曲达到摆动腿缩短的新模型。当摆动腿开始摆动时,摆动腿膝关节弯曲锁定,摆动腿缩短;当摆动腿摆动到最大位置时,膝关节解锁,摆动腿伸直再锁定,此后摆动腿回摆,系统变为直腿模型。采用脚后跟冲击控制,在摆动腿落地前,拖后的支撑腿与地面接触处施加一指向髋关节的瞬时冲击力,冲击力可以减小摆动腿着地时能量的损耗,同时驱动被动机器人向前行走。设计了迭代学习控制算法,找到极限环与不动点,实现不同给定期望步长跟踪的冲击力的计算。仿真结果表明,迭代学习控制可以有效的实现不同期望步长的跟踪,可以很快的找到机器人系统的不动点,通过收敛的相平面,得到稳定的极限环,保证了机器人行走过程稳定。     

沙摆实验误差分析

从实验误差理论角度，分析了沙摆重心变化引起的实验误差，结果表明由重心变化引起的误差相对于其它误差而言在实验中占主要地位．     

基于语义的软件服务故障自动诊断模型

模仿学习是机器人仿生机制研究的主要内容之一,即通过观察、理解、学习、模仿示教行为实现机器人的仿生特性。基于高斯过程分别表达采集离散示教信号所构成的示教轨迹和含有未知参数策略的模仿轨迹,构建模仿学习方法框架,将概率模型匹配引入到模仿学习中,以KL散度为代价函数比较两种轨迹的概率分布,运用梯度下降法寻求使KL散度最小的最优模仿控制策略,将策略应用于模仿机器人以完成与示教相同的模仿任务。以关节型机器人的机械臂摆动行为模仿为学习任务进行仿真,结果表明基于概率轨迹匹配的模仿学习方法能够实现机械臂摆动行为模仿,学习过程较传统方法简易且学习效果较好。     

光热电厂储热系统动态建模及仿真

由于太阳能的随机性及波动性,光热电厂在工作过程中其储热系统的工作状态需时常切换.为探究其在不同天气变化情况下的动态特性,本文基于gPROMS建立了光电厂的双罐式储热系统动态模型,并将其运行结果与电厂实际运行结果相比较.仿真结果表明,基于该平台所构建的模型能够在晴天与多云两种天气下准确地描述储热系统的动态过程.     

光谱角制图模型的误差源分析与改进算法

在深入分析光谱角制图模型误差源的基础上,指出影响光谱角计算精度的因素主要包括波段位置变化、属性值等比变化、属性值随机变化、波段整体偏移。在分析上述4种情况误差源基本特征的基础上,提出了光谱角分组计算方法、归一化计算方法和交叉计算方法。光谱角分组计算方法在考虑全局特征的同时通过奇数波段、偶数波段分别考虑局部信息,能够解决伪相似问题;归一化计算方法将光谱向量进行归一化,从而抑制了原始数据中的随机误差,主要适用于部分或全部波段属性值有规律或无规律变化的情况;交叉计算方法可以解决由于波段整体偏移引发的误差,保证相似光谱向量的正确识别。试验表明这些算法均具有较好的效果,能够适应处理含有误差数据的要求。     

Guided-Wave Two-Dimensional Acousto-Optic Scanner Using Proton-Exchanged Lithium Niobate Waveguide

Two-dimensional scanning of a 0.6328 mum guided-light beam has been realized using noncolinear acousto-optic (AO) coplanar Bragg diffraction together with colinear AO guided-mode to substrate radiation-mode conversion in a Z-cut Xpropagation LiNbO3 proton-exchanged (PE) waveguide. The two surface acoustic (SAW) waves utilized are at the center frequencies of 500 and 200 MHz, propagating in the Y and X axes, respectively. Two-dimensional scanning of approximately 720 resolvable light beam spots, namely, 18 40 (horizontal vertical) scanning, has been demonstrated using a light beam of 1.0 mm aperture. The total number of resolvable beam spots can be greatly increased from 720 by simply utilizing SAW transducers of larger bandwidth and a light beam of greater aperture. It should also be possible to significantly increase the diffraction efficiency from 3 % by optimizing the parameters of the PE waveguide and the SAWs.     

Femtosecond Transform-Limited Pulse Generation by Compensating for the Linear Chirp of SPM Spectra in Dispersion Shifted Fibers

A simple technique of pulse compression, based on the linear chirp compensation of self-phase modulation (SPM) spectra in dispersion shifted fibers, is demonstrated. The optimization procedure is carried out, for a short span of a single-mode fiber, using a parabolic law, which describes the behavior of the squared output pulse width versus the pump peak power in the case of Gaussian pulses. The experimental results give a minimum pulse duration of 233 fs, which is in good agreement with the model. Shorter and coherent pulses, down to 90 fs, have been obtained by inserting an interference filter at the optical output.     

Effect ofγ-radiation on the spectral luminescence characteristics of impure cadmium tungstate crystals

Results of a study of the effect of γ-radiation on the spectral luminescence properties of cadmium tungstate crystals doped with silver, bismuth, and molybdenum cations are presented. Spectral characteristics of the nondnnnoped crystals are briefly described. Absorption and photo and X-ray luminescence spectra of the crystals taken before and after exposure to γ-radiation (5.5·10⁴ Gy) are compared. It is found that the spectral characteristics of the crystals doped with silver, bismuth, and molybdenum cations do not change markedly after the exposure. The relation between the type of impurity-induced defects, individual characteristics of the impurity cations, and the character of the effect of γ-radiation on the spectral luminescence properties of impure crystals is analyzed (preliminarily). Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 64, No. 1, pp. 55–60, January–February, 1997.     

Sorting of bending magnets for the SSRF booster

The Shanghai Synchrotron Radiation Facility(SSRF)booster ring,a full energy injector for the storage ring,is deigned to accelerate the electron beam energy from 150MeV to 3.5GeV that demands high extraction efficiency at the extraction energy with low beam loss rate when electrons are ramping.Closed orbit distortion(COD)caused by bending magnet field uniformity errors which affects the machine performance harmfully could be effectively reduced by bending magnet location sorting.Considering the affections of random errors in measurement,both ideal sorting and realistic sorting are studied based on measured bending magnet field uniformity errors and one reasonable combination of bending magnets which can reduce the horizontal COD by a factor of 5is given as the final installation sequence of the booster bending magnets in this paper.     

Theoretical analysis and simulation of conjugate heights for dual-conjugate AO system in lidar

A multi-conjugate adaptive optics （MCAO） can offer a possibility of widening field of view （FOV） characterized by the isoplanatic angle, and the choose of conjugate height becomes a basic problem for MCAO, which influences the size of iosplanatic angle. Considering the application of lidar, the isoplanatic angle＇s expressions of two deformable mirrors （DMs） MCAO for uplink and downlink are deduced. The effects of conjugate heights for dual-conjugate AO are thoughtfully discussed, and the isoplanatic angles are further analyzed. The results show that the isopanatic angle varies with the conjugate height and reaches the maximum as the conjugate height is at the optimal altitude. Moreover, the optimal conjugate height changes with the propagation distance.     

Quick single-photon detector with many avalanche photo diodes working on the time division

Due to the limit of response speed of the present single-photon detector, the code rate is still too low to come into practical use for the present quantum key distribution (QKD) system.A new idea is put up to design a quick single-photon detector.This quick single-photon detector is composed of a multi-port optic-fiber splitter and many avalanche photo diodes (APDs).Au of the ports with APDs work on the time division and cooperate with a logic discriminating and deciding unit driven by the clock signal.The operation frequency lies on the number N of ports, and can reach N times of the conventional single-photon detector.The single-photon prompt detection can come true for high repetition-rate pulses.The applying of this detector will largely raise the code rate of the QKD, and boost the commercial use.     

Measurement of nonlinear coefficient of optical fiber based on small chirped soliton transmission

We measure the waveform and phase curves of short optical pulses before and after transmission over different lengths of fibers by use of the pulse analyzer with the frequency-resolved optical gating (FROG),and numerically simulate pulse evolution under the experimental conditions.The nonlinear coefficient of the fiber is given by comparing the experimental results with the numerical ones.Difference between the experiment and numerical simulation is analyzed.     

Resonance scattering of canonical elastic shells in absorbing fluid medium

Resonance scattering of elastic spherical shell and cylindrical shell while the surrounding fluid medium has absorption is studied. The normal mode solution derived using exact elastic theory and the separation of variables is still applicable. However, the scattering form function has to be modified for the absorbing medium, otherwise the unreasonable result would be obtained. The backscattering form function in the absorbing medium is redefined, and the form function of elastic spherical and cylindrical shell with vacuum or solid matter filled is calculated in various absorption conditions. The results show that the absorption of surrounding fluid leads to notable attenuation of the coincidence resonances in the mid-frequency, but it has a little influence on the low-frequency resonance scattering induced by the filler inside the shell.