Probing the Rotational Dynamics of meso‐(2‐Substituted)aryl Substituents in A2B‐Type Subporphyrins

A₂B‐type B‐methoxy subporphyrins 3 a – g and B‐phenyl subporphyrins 7 a – c , e , g bearing meso‐(2‐substituted)aryl substituents are synthesized, and their rotational dynamics are examined through variable‐temperature (VT) ¹H NMR spectroscopy. In these subporphyrins, the rotation of meso‐aryl substituents is hindered by a rationally installed 2‐substituent. The rotational barriers determined are considerably smaller than those reported previously for porphyrins. Comparison of the rotation activation parameters reveals a variable contribution of ΔH^≠ and ΔS^≠ in ΔG^≠. 2‐Methyl and 2‐ethyl groups of the meso‐aryl substituents in subporphyrins 3 e , 3 f , and 7 e induce larger rotational barriers than 2‐alkoxyl substituents. The rotational barriers of 3 g and 7 g are reduced by the presence of the 4‐dibenzylamino group owing to its ability to stabilize the coplanar rotation transition state electronically. The smaller rotational barriers found for B‐phenyl subporphyrins than for B‐methoxy subporphyrins indicate a negligible contribution of S_N1‐type heterolysis in the rotation of meso‐aryl substituents.     

Frontispiece: From Phosphidic to Phosphonium? Umpolung of the P4-Bonding Situation in [CpFe(CO)(L)(η1-P4)]+ Cations (L=CO or PPh3)

Upon coordinating P₄ to electron poor cyclopentadienyl-iron cations, the average P−P bond distances shrink and the respective P₄ breathing mode in the Raman spectra (600 cm⁻¹, P_{4, free}) is blueshifted by >40 cm⁻¹ in [CpFe(CO)(L)(η¹-P₄)]⁺ cations (L=CO or PPh₃). Analysis suggests that this corresponds to an umpolung of the bonding from more phosphidic in the known, electron-rich systems to more phosphonium-like in the reported electron-poor versions. This may open new functionalization pathways for white phosphorus P₄.     

Indandione-Terminated Quinoids: Facile Synthesis by Alkoxide-Mediated Rearrangement Reaction and Semiconducting Properties

A series of 1,3-indandione-terminated π-conjugated quinoids were synthesized by alkoxide-mediated rearrangement reaction of the respective alkene precursors, followed by air oxidation. This new protocol allows access to quinoidal compounds with variable termini and cores. The resulting quinoids all show LUMO levels below −4.0 eV and molar extinction coefficients above 10⁵ L mol⁻¹ cm⁻¹. The optoelectronic properties of these compounds can be regulated by tuning the central cores as well as the aryl termini ascribed to the delocalized frontier molecular orbitals over the entire molecular skeleton involving aryl termini. n-Channel organic thin-film transistors with electron mobility of up to 0.38 cm² V⁻¹ s⁻¹ were fabricated, showing the potential of this new class of quinoids as organic semiconductors.     

Tetrahalidometallate(II) Ionic Liquids with More than One Metal: The Effect of Bromide versus Chloride

Fifteen N-butylpyridinium salts – five monometallic [C₄Py]₂[MBr₄] and ten bimetallic [C₄Py]₂[M_0.5^aM_0.5^bBr₄] (M=Co, Cu, Mn, Ni, Zn) – were synthesized, and their structures and thermal and electrochemical properties were studied. All the compounds are ionic liquids (ILs) with melting points between 64 and 101 °C. Powder and single-crystal X-ray diffraction show that all ILs are isostructural. The electrochemical stability windows of the ILs are between 2 and 3 V. The conductivities at room temperature are between 10⁻⁵ and 10⁻⁶ S cm⁻¹. At elevated temperatures, the conductivities reach up to 10⁻⁴ S cm⁻¹ at 70 °C. The structures and properties of the current bromide-based ILs were also compared with those of previous examples using chloride ligands, which illustrated differences and similarities between the two groups of ILs.     

The chloro-substituent enhances performance of 2,4-bis (imino)pyridylchromium catalysts yielding highly linear polyethylene

The five unsymmetrical 2-[1-(2,4-dibenzhydryl-6-chlorophenylimino)ethyl]-6-[1-(arylimino)ethyl]pyridine compounds (aryl: 2,6-Me₂Ph L1 , 2,6-Et₂Ph L2 , 2,6-ⁱPr₂Ph L3 , 2,4,6-Me₃Ph L4 and 2,6-Et₂–4-MePh L5 ) were prepared and characterized with FT-IR and ¹H/¹³C NMR spectroscopy as well as elemental analysis. The treatment of L1 – L5 with CrCl₃·3THF affords the corresponding chromium chloride complexes ( Cr1 – Cr5 ) in excellent yields. The molecular structures of Cr2 and Cr3 characterized by X-ray diffraction show a distorted octahedral geometry with three nitrogen atoms and three chlorine atoms around the metal center. On activation with either MAO or MMAO, Cr1 – Cr5 collectively display high activity (up to 14.96 × 10⁶ g (PE) mol⁻¹ (Cr) h⁻¹ at 60 °C) affording highly linear polyethylene with low molecular weight distribution (M_w/M_n) ranging from 1.06 to 2.81. An in-depth catalytic evaluation of Cr1 was conducted in order to investigate how the cocatalyst type and its amount, reaction temperature and polymerization time affect the catalytic activities and polymer properties.     

Novel Approach for Rapid and Efficient Synthesis of 2‐(3‐(4‐Aryl)‐1‐isonicotinoyl‐4,5‐dihydro‐1H‐pyrazol‐4‐yl)‐3‐phenylthiazolidin‐4‐one Derivatives and Screened Their Antimicrobial Activity

A series of compounds, viz. 2‐(3‐(4‐aryl)‐1‐isonicotinoyl‐4,5‐dihydro‐1H‐pyrazol‐4‐yl)‐3‐phenylthiazolidin‐4‐one 4 ( a – n ), have been synthesized by reaction of 3 ( a – n ) with thioglycolic acid in the presence of zinc chloride. Compounds 3 ( a – n ) have been synthesized by amination of formylated pyrazoles 2 ( A – B ), which were synthesized by formylation of 1 ( A – B ) by Vilsmeier–Haack reagent (POCl₃/DMF). Compounds 1 ( A – B ) were synthesized by condensation of hydrazide and substituted acetophenones under conventional method and microwave irradiation method. These compounds were identified on the basis of melting point range, Rf values, infrared, ¹H NMR, and mass spectral analysis. These compounds were evaluated for their in vitro antimicrobial activity, and their minimum inhibitory concentration was determined. Among them, compound 4b and compound 4l possess appreciable antimicrobial and antifungal activities. Antibacterial activity results showed that compounds containing electron‐withdrawing groups were more active than compounds containing electron‐releasing groups.     

Trichalcogenasumanene ortho‐Quinones: Synthesis,Properties, and Transformation into Various Heteropolycycles

The regioselective transformation of heterobuckybowl trichalcogenasumanenes 1 a , b at peripheral butoxy groups afforded trichalcogenasumanene ortho ‐quinones 2 a , b . Compounds 2 a , b are distinct from 1 a , b in terms of their molecular geometry and electronic state; that is, they have a shallower bowl depth and show absorbance in the NIR region. The reaction of 2 a , b with diamines resulted in a variety of heteropolycycles, including molecular spoon 3 a – 6 a , planar π‐systems 3 b – 6 b , and highly twisted [7‐6‐6]‐fused systems 7 a , b . These new heteropolycycles had different optical/electrical properties: 4 a,b showed hole mobility of approximately 0.002 cm² V⁻¹ s⁻¹, 6 a displayed red emission in both solution and the solid state, and 7 a , b formed tight stacks of the curved π‐surface.     

Trichalcogenasumanene ortho‐Quinones: Synthesis,Properties, and Transformation into Various Heteropolycycles

The regioselective transformation of heterobuckybowl trichalcogenasumanenes 1 a , b at peripheral butoxy groups afforded trichalcogenasumanene ortho ‐quinones 2 a , b . Compounds 2 a , b are distinct from 1 a , b in terms of their molecular geometry and electronic state; that is, they have a shallower bowl depth and show absorbance in the NIR region. The reaction of 2 a , b with diamines resulted in a variety of heteropolycycles, including molecular spoon 3 a – 6 a , planar π‐systems 3 b – 6 b , and highly twisted [7‐6‐6]‐fused systems 7 a , b . These new heteropolycycles had different optical/electrical properties: 4 a,b showed hole mobility of approximately 0.002 cm² V⁻¹ s⁻¹, 6 a displayed red emission in both solution and the solid state, and 7 a , b formed tight stacks of the curved π‐surface.     

Carbon-Phosphorus Ligands with Extreme Donating Character

Carbeniophosphines [R₂C⁺−PR₂] and phosphonium ylides [R₃P⁺−CR₂⁻] are two complementary classes of carbon-phosphorus based ligands defined by their unique donor properties. Indeed, while carbeniophosphines are electron-poor P-ligands due to the positioning of a positive charge near the coordinating P-atom, phosphonium ylides are electron-rich C-ligands due to the presence of a negatively charged coordinating C-atom. Based on this knowledge, this account summarizes our recent contribution on these two classes of carbon-phosphorus ligands, and in particular the strategies developed to lower the donor character of carbeniophosphines and enhance that of phosphonium ylides. This led us to design, at both extremities of the donating scale, extremely electron-poor P-ligands exemplified by imidazoliophosphonites [R₂C⁺−P(OR)₂] and dicarbeniophosphines [(R₂C⁺)₂−PR], and extremely electron-rich C-ligands illustrated by pincer architectures exhibiting several phosphonium ylide donor extremities. In the context of carbon-phosphorus analogy, the closely related cases of ligands where the C-atom of a NHC ligand is in close proximity of two positive charges, and that of a phosphonium ylide coordinated through its P-atom are also discussed. An overview of the synthetic methods, coordinating properties, general reactivity and electronic structure of all these C,P-based species is presented here.     

Chlorine-Substituted N-Heteroacene Analogues Acting as Organic Semiconductors for Solution-Processed n-type Organic Field-Effect Transistors

High performance solution processable n-type organic semiconductor is an essential element to realize low-cost, all organic and flexible composite logic circuits. In the design of n-type semiconducting materials, tuning the LUMO level of compounds is a key point. As a strong electron withdrawing unit, the introduction of chlorine atom into the chemical structure can increase the electron affinity of the material and reduce the LUMO energy level. Here, a series chlorine substituted N-heteroacene analogues of 6,7,8,9-tetrachloro-4,11-bis(4-((2-ethylhexyl)oxy)phenyl)-[1,2,5]thiadiazolo[3,4-b]phenazine (O4Cl), 6,7,8,9-tetrachloro-4,11-bis(4-((2-ethylhexyl)thio)phenyl)-[1,2,5]thiadiazolo[3,4-b]phenazine (S4Cl), 1,2,3,4,8,9,10,11-octachloro-6,13-bis(4-((2-ethylhexyl)oxy)phenyl)quinoxalino[2,3-b]phenazine (8Cl) and 12Cl have been synthesized and characterized. Solution-processed organic field-effect transistors (OFETs) based on these four compounds exhibit good electron mobilities of 0.04 cm² V⁻¹ s⁻¹, 0.01 cm² V⁻¹ s⁻¹, 2×10⁻³ cm² V⁻¹ s⁻¹ and 3×10⁻³ cm² V⁻¹ s⁻¹, respectively, under ambient conditions. The results suggest that these chlorine substituted π-conjugated N-heteroacene analogues are promising n-type semiconductors in OFET applications.     

Linking Polythiophene Chains Through Conjugated Bridges: A Way to Improve Charge Transport in Polymer Solar Cells

Summary: A series of cross‐linked polythiophene derivatives ( P1 – 4 ) are synthesized by adding different ratio (0, 2, 5, and 10%) of conjugated cross‐linker via a Stille coupling reaction. From P1 – 4 , with the increase of the content of the conjugated bridges, the UV‐visible absorption peaks of the polymers were shifted towards blue and their electrochemical bandgap increased. The hole mobilities of P1 – 4 as determined from the SCLC model are 5.23 × 10⁻⁶, 1.28 × 10⁻⁴, 7.01 × 10⁻³, and 2.34 × 10⁻⁵ cm² · V⁻¹ · s⁻¹, respectively. The PCEs of the polymer solar cells based on P1 – 4 are 0.37, 1.05, 1.26, and 0.78%, respectively. The improvement of PCE of the devices based on P2 – 4 compared with that of P1 may be due to the increase of hole mobility.

Molecular structure of the polythiophene derivatives ( P1 – 4 ).     

Photographic plasma images and electron number density as well as electron temperature mappings of a plasma sustained with a modified argon microwave plasma torch (MPT) measured by spatially resolved Thomson scattering

In this work the determination of electron number densities and electron temperatures for the case of a modified microwave plasma torch (MPT) operated at 100 W with argon by means of spatially resolved Thomson scattering measurements and photographic records of the MPT at different working conditions are reported. With an internal gas flow of 500 ml min⁻¹ and an outer gas flow of 200 ml min⁻¹ electron number densities and electron temperatures are in the range of 10²⁰ m⁻³ to 10²¹ m⁻³ and of 16 000–18 000 K, respectively. When increasing the internal gas flow from 500 to 900 ml min⁻¹ the plasma becomes longer and the maximum electron number density increases by a factor of 2. An increase of the outer gas flow from 200 to 700 ml min⁻¹ leads to a lifting of the whole plasma from the burner edge with the maximum electron number density remaining unchanged. An increase of the power from 80 to 180 W was found to lead to higher electron number densities whereas the electron temperatures remain unchanged. The addition of 1.2 mg min⁻¹ of water vapor to the internal gas flow leads to a decrease of the electron number density from 4.7×10²⁰ m⁻³ to 2×10²⁰ m⁻³ and to an increase of the electron temperature from 16 000 to 22 000 K. In order to document the influence of the internal gas flow rate, water introduction and introduction of easily ionized elements on the visible plasma shape digitally recorded photos of the plasma are presented.     

Cross‐linked poly(aryl ether sulfone) membranes for direct methanol fuel cell applications

Partially sulfonated poly(aryl ether sulfone) (PESS) was synthesized and methacrylated via reaction with glycidyl methacrylate (PESSGMA) and cross‐linked via radical polymerization with styrene and vinyl‐phosphonic acid (VPA). The chemical structures of the synthesized pre‐polymers were characterized via FTIR and ¹H NMR spectroscopic methods and molecular weight was determined via GPC. Membranes of these polymers were prepared via solution casting method. The crosslinking of the PESS polymer reduced IEC, proton conductivity, swelling in water, and methanol permeability of the membranes while increasing the modulus and the glass transition temperature. However, the introduction of the VPA comonomer increased the proton conductivity while maintaining excellent resistance to methanol cross‐over, which was significantly higher as compared with both PESS and the commercial Nafion membranes. Membranes of PESSGMA copolymers incorporating VPA, exhibited proton conductivity values at 60 °C in the range of 16–32 mS cm⁻¹ and methanol permeability values in the range of 6.52 × 10⁻⁹ – 1.92 × 10⁻⁸ cm² s⁻¹. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 558–575     

Valence isomerization in dendrimers by photo-induced electron transfer and energy transfer from the dendrimer backbone to the core

A series of poly(aryl ether) dendrimers with a norbornadiene (NBD) group attaching to the core (Gn-NBD), generations 1–4, were synthesized and characterized, and their photophysical and photochemical properties were examined. The fluorescence of the dendrimer backbone is quenched by the norbornadiene group as a result of the electron transfer and energy transfer from the dendrimer backbone to the norbornadiene group in Gn-NBD. Selective excitation of the dendrimer backbone results in an isomerization of the norbornadiene group to the quadricyclane (QC) group. The intramolecular electron transfer and energy transfer efficiencies are ca. 0.93, 0.73, 0.54, 0.30 in dichloromethane, and ca. 0.90, 0.70, 0.55, 0.34 in tetrahydrofuran for generations 1–4, respectively, with the rate constant ca. 10¹⁰ s⁻¹. The light-harvesting ability of these dendritic molecules is demonstrated by the enhanced valence isomerization rate of NBD to QC with increasing generation.     

Direct Amination of meso‐Tetraarylporphyrin Derivatives – Easy Route to A3B‐, A2BC‐, and A2B2‐Type Porphyrins Bearing Two Nitrogen‐Containing Substituents at the meso‐Positioned Phenyl Groups

meso‐Tetraarylporphyrinato complexes 1a – g (Zn^II, Cu^II, and Ni^II) bearing one or two nitro‐substituted aryl moieties react with 1,1,1‐trimethylhydrazinium iodide in the presence of ^tBuOK in THF at 0–5° or in the presence of KOH in DMSO at 60–70° according to a nucleophilic substitution of an H‐atom, thus affording porphyrins 2a – g and 3f , g with amino‐functionalized meso‐positioned aryl substituents in yields up to 73% (Scheme 1 and Table). The products obtained are attractive intermediates for further derivatization of porphyrins and may be of potential use as sensitizers in photodynamic cancer therapy.     

Synthesis of Cyclopentadienyl Capped Polyethylene and Subsequent Block Copolymer Formation Via Hetero Diels‐Alder (HDA) Chemistry

In the current contribution it is demonstrated – for the first time – that poly(ethylene) ( = 1 400 as well as 2 800 g · mol⁻¹, PDI = 1.2) can be readily equipped with highly reactive cyclopentadienyl (Cp) end groups. The Cp terminal poly(ethylene) can subsequently be reacted in an efficient hetero Diels‐Alder (HDA) reaction with macromolecules (poly(isobornyl acrylate) ( = 4 600 g · mol⁻¹, PDI = 1.10) and poly(styrene) ( = 6 300 g · mol⁻¹, PDI = 1.13) featuring strongly electron withdrawing thiocarbonyl thio end groups, prepared via reversible addition fragmentation chain transfer (RAFT) polymerization employing benzylpyridin‐2‐yldithioformate (BPDF) as transfer agent. The resulting block copolymers have been analyzed via high‐temperature size exclusion chromatography (SEC) as well as nuclear magnetic resonance (NMR) spectroscopy. The current system allows for the removal of the excess of the non‐poly(ethylene) containing segment via filtration of the poly(ethylene)‐containing block copolymer. However, the reaction temperatures need to be judiciously selected. Characterization of the generated block copolymers at elevated temperatures can lead – depending on the block copolymer type – to the occurrence of retro Diels‐Alder processes. The present study thus demonstrates that RAFT‐HDA ligation can be effectively employed for the generation of block copolymers containing poly(ethylene) segments.

     

Gold(I)-catalyzed direct C-H arylation of pyrazine and pyridine with aryl bromides

An efficient procedure for the direct C-H arylation of electron-poor aromatics such as pyrazine and pyridine with aryl bomides is described. In the presence of catalytic amount of Cy₃PAuCl and with the use of t-BuOK as base, pyrazine undergoes the direct C-H arylation with aryl bromides at 100 °C, and the yields of the arylated products depend on the nature of aryl bromides. In the cases of electron-rich aryl bromides used, the arylated pyrazines can be obtained in good to high yields. For electron-poor aryl bromides, the addition of AgBF₄ is the crucial point to accelerate the coupling reaction to give the arylated products in moderate yields. Pyridine also reacts with electron-rich aryl bromides catalyzed by Cy₃PAuCl to give a mixture of arylated regioisomers in moderate yield. However, in order to realize the direct C-H arylation of pyridine with electron-poor aryl bromides, the addition of silver salt as additive and a milder reaction temperature (60 °C) are required.     

Evaluation of continuous hydride generation combined with helium and argon microwave induced plasmas using a surfatron for atomic emission spectrometric determination of arsenic,antimony and selenium

The direct coupling of continuous hydride generation with both Ar and He microwave induced plasmas (MIP) sustained in a surfatron has been optimized for the simultaneous determination of arsenic, antimony and selenium with atomic emission spectrometry. While a discharge tube of quartz was found suitable for the Ar plasma, the use of an Al₂O₃ tube led to improved performance of the He plasma. The He MIP was found to be less tolerant to the introduction of hydrogen than the Ar MIP, and correspondingly the hydride generation should be operated at a lower flow rate of 0.5% NaBH₄ solution. The introduction of the H₂O vapour produced during hydride generation into both discharges was found to greatly decrease the sensitivities and to degrade the measurement precision. It could be effectively removed with trapping by concentrated H₂SO₄. The detection limits (3σ) for As, Sb and Se are 1, 0.4 and 1 ng ml⁻¹ with the Ar MIP, and 2, 0.3 and 6 ng ml⁻¹ with the He MIP, respectively. The calibration curves are linear over three decades of concentration. The mutual interferences from As(III), Sb(III), Se(IV), Bi(III) and Sn(IV) were found to be negligible at interferent concentrations below 1 μg ml⁻¹ and in most cases the tolerable interferent concentrations are up to 20 μg ml⁻¹. The proposed method has been applied to the determination of As, Sb and Se in tea samples at μg g⁻¹ levels.     

Chemie freier cyclischer vicinaler Tricarbonyl‐Verbindungen (‘1,2,3‐Trione') Teil 2. Redox‐Reaktionen von 1,2,3‐Trionen mit En‐1,2‐diolen (‘Reduktonen'), 2‐Alkoxy‐en‐1‐olen,En‐1,2‐diaminen und verwandten Spezies

Chemistry of Free Cyclic Vicinal Tricarbonyl Compounds (‘1,2,3‐Triones'). Part 2. Redox Reactions of 1,2,3‐Triones with Ene‐1,2‐diols (‘Reductones'), 2‐Alkoxy‐en‐1‐ols, Ene‐1,2‐diamines, and Related Species . Midstanding carbonyl groups of cyclic 1,2,3‐triones 4 possess outstanding electrophilic (electron‐pair accepting) as well as oxidizing (one‐electron accepting) properties. Their reactions with selected electron‐rich CC bonds as efficient nucleophiles (A_N reactions) and as efficient reducing agents (SET (single electron transfer) reactions) are studied. In a few cases, short‐lived charge‐transfer colors could be observed. Particularly, free didehydro‐5,6‐O‐isopropyliden‐L ‐ascorbic acid ( 4g ), its O,C‐adduct 8g to 5,6‐O‐isopropylidene‐L ‐ascorbic acid ( 1g ), and – via an independent pathway – the ostensible C,C‐dimer 10a of mono‐dehydrodimedone reductone were prepared. Intermediate radical anions 4 ^.− can be considered to be ideal representatives of dicapto‐dative radicals. Novel large‐scale syntheses of 3,4‐dihydroxyfuran‐2(5H)‐one ( 1e ) and of its vicinal trione 4e are presented.     

Conjoint use of Naphthalene Diimide and Fullerene Derivatives to Generate Organic Semiconductors for n–type Organic Thin Film Transistors

In this paper, we described the design, synthesis, and characterization of two novel naphthalene diimide (NDI) core-based targets modified with terminal fullerene (C₆₀) yield – so called S4 and S5 , in which NDI bearing 1 and 2 molecules of C₆₀, respectively. The absorption, electrochemical and thin-film transistor characteristics of the newly developed targets were investigated in detail. Both S4 and S5 displayed broad absorption in the 450–500 nm region, owing to the effect of conjugation due to fullerene functionalities. The electrochemical measurement suggested that the HOMO and the LUMO energy levels can be altered with the number of C₆₀ units. Both S4 and S5 were employed as organic semiconductor materials in n-channel transistors. The thin film transistor based on S4 exhibited superior electron mobility (μe) values ranging from 1.20×10⁻⁴ to 3.58×10⁻⁴ cm² V⁻¹ s⁻¹ with a current on-off ratio varying from 10² to 10³ in comparison with the performance of S5 based transistor, which exhibited μe ranging from 8.33×10⁻⁵ to 2.03×10⁻⁴ cm² V⁻¹ s⁻¹ depending on channel lengths.