Indandione‐Terminated Quinoids: Facile Synthesis by Alkoxide‐Mediated Rearrangement Reaction and Semiconducting Properties

A series of 1,3‐indandione‐terminated π‐conjugated quinoids were synthesized by alkoxide‐mediated rearrangement reaction of the respective alkene precursors, followed by air oxidation. This new protocol allows access to quinoidal compounds with variable termini and cores. The resulting quinoids all show LUMO levels below ?4.0 eV and molar extinction coefficients above 10⁵ L mol^?1 cm^?1. The optoelectronic properties of these compounds can be regulated by tuning the central cores as well as the aryl termini ascribed to the delocalized frontier molecular orbitals over the entire molecular skeleton involving aryl termini. n‐Channel organic thin‐film transistors with electron mobility of up to 0.38 cm² V^?1 s^?1 were fabricated, showing the potential of this new class of quinoids as organic semiconductors.     

Diindenopyrazines: Electron-Deficient Arenes

The syntheses, properties and application of the air-stable electron acceptors, diindenopyrazines 4 a – g are reported demonstrating the introduction of functional aryl groups in the 6- and 12-positions. The targets are accessible on the hundred milligram to gram scale. The structure of the aryl groups in 4 a – g modulates their solubility, redox potentials and optical properties. The introduction of electron-poor aryl groups to the electron-poor diindenopyrazine backbone reduces the electron affinity to −4 eV, making the compounds attractive as n-semiconductors. A simple organic field-effect transistor of 4 e –without optimization– shows electron transport with a mobility of up to 0.037 cm² V⁻¹ s⁻¹.     

B←N-Incorporated Dibenzo-azaacene with Selective Near-Infrared Absorption and Visible Transparency

Organic compounds with selective near-infrared absorption and visible transparency are very desirable for fabrication of transparent/semitransparent optoelectronic devices. Herein, we develop a molecule with selective near-infrared absorption property, QBNA-O , in which four B←N units are incorporated to the core and two benzodioxin groups are introduced at the termini of the dibenzo-azaacene skeleton. QBNA-O exhibits a small optical gap of 1.39 eV due to the strong electron-donating benzodioxin groups and the strong electron-withdrawing B←N units. In toluene solution, QBNA-O shows a strong absorption peak at 856 nm with the full width at half maximum (FWHM) of only 41 nm as well as very weak absorption in the visible range from 380 nm to 760 nm. Thin films of QBNA-O exhibit the average visible transparency (AVT) of 78 % at the thickness of 205 nm and 90 % at the thickness of 45 nm. Solution-processed organic field-effect transistors (OFETs) of QBNA-O display ambipolar transporting behavior with the electron mobility of 0.52 cm² V⁻¹ s⁻¹ and the hole mobility of 0.013 cm² V⁻¹ s⁻¹ together with excellent air-stability. The selective NIR absorbing property and excellent charge transporting property imply that QBNA-O can be used to fabricate transparent organic optoelectronic devices.     

Modulating the Electronic and Solid-State Structure of Organic Semiconductors by Site-Specific Substitution: The Case of Tetrafluoropentacenes

The properties as well as solid-state structures, singlet fission, and organic field-effect transistor (OFET) performance of three tetrafluoropentacenes (1,4,8,11: 10 , 1,4,9,10: 11 , 2,3,9,10: 12 ) are compared herein. The novel compounds 10 and 11 were synthesized in high purity from the corresponding 6,13-etheno-bridged precursors by reaction with dimethyl 1,2,4,5-tetrazine-3,6-dicarboxylate at elevated temperatures. Although most of the molecular properties of the compounds are similar, their chemical reactivity and crystal structures differ considerably. Isomer 10 undergoes the orbital symmetry forbidden thermal [4+4] dimerization, whereas 11 and 12 are much less reactive. The isomers 11 and 12 crystallize in a herringbone motif, but 10 prefers π–π stacking. Although the energy of the first electric dipole-allowed optical transition varies only within 370 cm⁻¹ (0.05 eV) for the neutral compounds, this amounts to roughly 1600 cm⁻¹ (0.20 eV) for radical cations and 1300 cm⁻¹ (0.16 eV) for dications. Transient spectroscopy of films of 11 and 12 reveals singlet-fission time constants (91±11, 73±3 fs, respectively) that are shorter than for pentacene (112±9 fs). OFET devices constructed from 11 and 12 show close to ideal thin-film transistor (TFT) characteristics with electron mobilities of 2×10⁻³ and 6×10⁻² cm² V⁻¹ s⁻¹, respectively.     

High-yield and sustainable synthesis of quinoidal compounds assisted by keto–enol tautomerism

The classical synthesis of quinoids, which involves Takahashi coupling and subsequent oxidation, often gives only low to medium yields. Herein, we disclose the keto–enol-tautomerism-assisted spontaneous air oxidation of the coupling products to quinoids. This allows for the synthesis of various indandione-terminated quinoids in high isolated yields (85–95%). The origin of the high yield and the mechanism of the spontaneous air oxidation were ascertained by experiments and theoretical calculations. All the quinoidal compounds displayed unipolar n-type transport behavior, and single crystal field-effect transistors based on the micro-wires of a representative quinoid delivered an electron mobility of up to 0.53 cm² V⁻¹ s⁻¹, showing the potential of this type of quinoid as an organic semiconductor.

Facilitated by the highly efficient Pd-catalyzed coupling and keto–enol-tautomerism-assisted spontaneous air oxidation, various indandione-terminated quinoidal compounds have been synthesized in isolated yields up to 95%.     

Cytotoxicological aspects of organic arsenic compounds contained in marine products using the mammalian cell culture technique

Arsenobetaine, arsenocholine, trimethylarsine oxide and tetramethylarsonium iodide, which are contained in marine fishery products, were examined for their potencies on cell growth inhibition, chromosomal aberration and sister chromatid exchange (SCE). Arseno- betaine, the major water-soluble organic arsenic compound in marine animals, exhibited very low cytotoxicity towards mammalian cells. This compound showed no cell growth inhibition at a concentration of 10 mg cm⁻³ and the cytotoxicity was lower than 1/14 000th of that of sodium arsenite and 1/1600th of that of sodium arsenate towards BALB/c 3T3 cells. The chromosomal aberrations caused by arsenobetaine at a concentration of 10 mg cm⁻³ consisted mainly of chromatid gaps and chromatid breaks, but in this concentration chromosomal breakage owing to its osmotic pressure is likely to be considerable. No SCE was observed at a concentration of 1 mg cm⁻³. Arsenocholine and trimethylarsine oxide also showed no cell growth inhibited at a concentration of 10 mg cm⁻³. However, tetramethylarsonium iodide inhibition the growth of BALB/c 3T3 at a concentration of 8 mg cm⁻³. These compounds exhibited a low ability to induce chromosomal aberrations at a concentration range of 2–10 mg cm⁻³ and no SCE was observed at a concentration of 1.0 mg cm⁻³. These results suggested that the major and minor organic arsenic compounds contained in marine fishery products are much less cytotoxic inorganic arsenic, methylarsonic acid and dimethylarsinic acid. © 1998 John Wiley & Sons, Ltd.     

Solution-Processable Unsymmetrical Triarylamines: Towards High Mobility and ON/OFF Ratio in Bottom-Gated OFETs

Self-assembly of organic small molecules into an ordered thin film has been the key strategy towards efficient charge transport for organic field-effect transistors (OFETs). Solution processing is a feasible and economic way to enhance pi–pi interaction. Herein, nitrile-substituted unsymmetrical triarylamines for OFET applications with high mobility are reported. The compounds were constructed by Suzuki cross-coupling reactions under inert conditions. The HOMO level of about 5.3 eV indicates good hole-transporting ability. OFETs were assembled in bottom-gate, top-contact architecture. Devices fabricated from a binary solvent system exhibited excellent p-channel characteristics, with impressively high charge-carrier mobility of up to 2.58 cm² V⁻¹ s⁻¹ and I_ON/OFF current ratios of 10⁶–10⁷. SEM and AFM analysis showed the efficient molecular self-assembly attained by the simple and effective solvent-engineering method. Theoretical insights obtained by DFT calculations supported by single-crystal structures showed that the crystalline nature and packing modes of these compounds ensure high mobility. The results prove that these compounds have great potential for use in numerous electronic applications, such as sensors and logic switches.     

Chlorine-Substituted N-Heteroacene Analogues Acting as Organic Semiconductors for Solution-Processed n-type Organic Field-Effect Transistors

High performance solution processable n-type organic semiconductor is an essential element to realize low-cost, all organic and flexible composite logic circuits. In the design of n-type semiconducting materials, tuning the LUMO level of compounds is a key point. As a strong electron withdrawing unit, the introduction of chlorine atom into the chemical structure can increase the electron affinity of the material and reduce the LUMO energy level. Here, a series chlorine substituted N-heteroacene analogues of 6,7,8,9-tetrachloro-4,11-bis(4-((2-ethylhexyl)oxy)phenyl)-[1,2,5]thiadiazolo[3,4-b]phenazine (O4Cl), 6,7,8,9-tetrachloro-4,11-bis(4-((2-ethylhexyl)thio)phenyl)-[1,2,5]thiadiazolo[3,4-b]phenazine (S4Cl), 1,2,3,4,8,9,10,11-octachloro-6,13-bis(4-((2-ethylhexyl)oxy)phenyl)quinoxalino[2,3-b]phenazine (8Cl) and 12Cl have been synthesized and characterized. Solution-processed organic field-effect transistors (OFETs) based on these four compounds exhibit good electron mobilities of 0.04 cm² V⁻¹ s⁻¹, 0.01 cm² V⁻¹ s⁻¹, 2×10⁻³ cm² V⁻¹ s⁻¹ and 3×10⁻³ cm² V⁻¹ s⁻¹, respectively, under ambient conditions. The results suggest that these chlorine substituted π-conjugated N-heteroacene analogues are promising n-type semiconductors in OFET applications.     

Structural Information on the Transition Moments in Poly(ethylene-2,6-naphthalene) by Polarization FT-IR Spectroscopy

Oriented poly(ethylene-2,6-naphthalate) (PEN) has been characterised by polarised FT-IR spectroscopy to determine the structural angles of the transition moments to the molecular chain axis. The bands at 1130 cm⁻¹, 1142 cm⁻¹ and 1602 cm⁻¹, which have been previously assigned as having their transition dipole moments parallel to the chain axis, are confirmed as parallel bands. Bands at 767 cm⁻¹ and 831 cm⁻¹ are confirmed as perpendicular bands. However the band at 1708 cm⁻¹ which has previously been assigned as a perpendicular band, is shown here to have its transition moment at 72° to the molecular axis.     

Solution‐Processable n‐Type Organic Field‐Effect Transistor (OFET) Materials Based on Carbonyl‐Bridged Bithiazole and Dioxocyclopentene‐Annelated Thiophenes

A series of electronegative π‐conjugated compounds composed of carbonyl‐bridged bithiazole and alkyl‐substituted dioxocyclopenta[b]thiophene were synthesized as a candidate for solution‐processable n‐type organic semiconductor materials and characterized on the basis of photophysical and electrochemical properties. Cyclic voltammetry measurements showed that the first half‐wave reduction potentials of these compounds are between −0.97 and −1.14 V versus ferrocene/ferrocenium, which corresponds to lowest unoccupied molecular orbital energy levels between −3.83 and −3.66 eV. Thanks to hexyl or dodecyl groups in the molecules, the compounds are sufficiently soluble to realize the fabrication of their thin films through a spin‐coating method. As a result, the prepared organic field‐effect transistors based on these newly developed compounds exhibited n‐channel characteristics not only under vacuum but also in air, and the best field‐effect electron mobility observed under vacuum was 0.011 cm² V⁻¹ s⁻¹ with an on/off ratio of 10⁸ and a threshold voltage of 16 V.     

Raman spectroscopic discrimination of estrogens

Estrogens are a group of steroid compounds found in the human body that are eventually discharged and ultimately end up in sewer effluents. Since these compounds can potentially affect the endocrine system its detection and quantification in sewer water is important. In this study, estrogens such as estrone (E1), estradiol (E2), estriol (E3), and ethynylestradiol (EE2) were discriminated and quantitated using Raman spectroscopy. Simulated Raman spectra were correlated with experimental data to identify unique marker peaks, which proved to be useful in differentiating each estrogen molecules. Among these marker peaks are Raman modes arising from hydroxyl groups of the estrogen molecules in the spectral region 3200–3700 cm⁻¹. Other Raman modes unique to each of the estrogen samples were also identified, including peaks at 1722 cm⁻¹ for E1 and 2109 cm⁻¹ for EE2, which corresponds to their distinctive structures each containing a different set of functional groups. To quantify the components of estrogen mixtures, the intensities of each identifying Raman bands, at 581 cm⁻¹ for E1, 546 cm⁻¹ for E2, 762 cm⁻¹ for E3 and 597 cm⁻¹ for EE2, were compared and normalized against the intensity of a common peak at 783 cm⁻¹. Quantitative analysis yielded most results within an acceptable 20% error.     

π-Extended Pyrrole-Fused Heteropine: Synthesis,Properties, and Application in Organic Field-Effect Transistors

Sulfur-embedded polycyclic aromatic compounds have been used as building blocks for numerous organic semiconductors over the past few decades. While the success is based on thiophene-containing compounds, aromatic compounds that contain thiepine, a sulfur-containing seven-membered-ring arene, has been less well investigated. Here we report the synthesis and properties of π-extended pyrrole-fused heteropine compounds such as thiepine and oxepine. A π-extended pyrrole-fused thiepine exhibited a “pitched π-stacking” structure in the crystal, and exhibited a high charge carrier mobility of up to 1.0 cm² V⁻¹ s⁻¹ in single-crystal field-effect transistors.     

4,5,9,10‐Pyrene Diimides: A Family of Aromatic Diimides Exhibiting High Electron Mobility and Two‐Photon Excited Emission

The design and synthesis of high‐performance n‐type organic semiconductors are important for the development of future organic optoelectronics. Facile synthetic routes to reach the K‐region of pyrene and produce 4,5,9,10‐pyrene diimide (PyDI) derivatives are reported. The PyDI derivatives exhibited efficient electron transport properties, with the highest electron mobility of up to 3.08 cm² V⁻¹ s⁻¹. The tert‐butyl‐substituted compounds (t‐PyDI) also showed good one‐ and two‐photon excited fluorescence properties. The PyDI derivatives are a new family of aromatic diimides that may exhibit both high electron mobility and good light‐emitting properties, thus making them excellent candidates for future optoelectronics.     

Intriguing diaza effects on magnetic coupling characteristics in diaza‐benzo[k]tetraphene‐bridged nitroxide diradicals

We theoretically design four diaza‐benzo[k]tetraphene‐based diradical isomers ( 1, 2, 3 , and 4 ) with two nitroxide (NO) radical groups as spin sources. The calculations at the B3LYP/6‐311++G(d,p) level suggest that the diaza doping can induce the aromaticity changes and the C C bond rearrangements and, thus, remarkably affect their magnetic coupling magnitudes and even characteristics (ferromagnetic vs. antiferromagnetic). More interestingly, different diaza‐doping positions can lead to distinctly different effects, and further dielectron‐oxidation can also noticeably change the magnetic coupling magnitudes from −919.9 cm⁻¹ ( 1 ) to −158.3 cm⁻¹ ( 1 ²⁺ ) or from −105.1 cm⁻¹ ( 3 ) to −918.9 cm⁻¹ ( 3 ²⁺ ) or induce the magnetic conversions from nonmagnetism ( 2 ) to antiferromagnetism ( 2 ²⁺ , −140.1 cm⁻¹) or from ferromagnetism ( 4 , 108.9 cm⁻¹) to antiferromagnetism ( 4 ²⁺ , −462.5 cm⁻¹). Good matching of two singly occupied molecular orbitals (SOMOs) of the NO groups with the highest occupied molecular orbital (HOMO) of the coupler (for 1 ), or with the lowest unoccupied molecular orbital (LUMO) of the coupler (for 3 ²⁺ and 4 ²⁺ ), available Kekulé structure (for 2 ), aromaticity variations are responsible to strong magnetic couplings. Besides, the HOMO‐LUMO energy gaps of the couplers also considerably affect the magnetic couplings. This work may open a new route for the rational design of the diaza‐benzo[k]tetraphene‐based magnetic molecular modulators or switches.     

Synthesis of Linear and V-Shaped Carbazolyl-Substituted Pyridine-3,5-dicarbonitriles Exhibiting Efficient Bipolar Charge Transport and E-Type Fluorescence

With the aim of developing all-organic bipolar semiconductors with high charge mobility and efficient E-type fluorescence (so-called TADF) as environmentally friendly light-emitting materials for optoelectronic applications, four noble metals-free dyes with linear and V-shapes were designed using accepting pyridine-3,5-dicarbonitrile and donating carbazole units. By exploiting a donor-acceptor design strategy and using moieties with different donating and accepting abilities, TADF emitters with a wide variety of molecular weights were synthesized to achieve the optimum combination of charge-transporting and fluorescent properties in one TADF molecule. Depending on molecule structures, different TADF emitters capable of emitting in the range from 453 to 550 nm with photoluminescence quantum yields up to 98 % for the solutions in oxygen-free toluene were obtained. All compounds showed bipolar charge-transport. Hole mobility of 2.8×10⁻³ cm²/Vs at 7×10⁵ V cm⁻¹ was observed for the compound containing two di-tert-butyl-substituted carbazole moieties. The compounds were tested in both non-doped and doped organic light-emitting diodes using different hosts. It was shown that the developed TADF emitters are suitable for different color devices with electroluminescence ranging from blue to yellow and with brightness, maximum current and external quantum efficiencies exceeding 10 000 cd m⁻², 15 cd/A, and 7 %, respectively.     

A Three-Dimensional Porous Organic Semiconductor Based on Fully sp2-Hybridized Graphitic Polymer

Dimensionality plays an important role in the charge transport properties of organic semiconductors. Although three-dimensional semiconductors, such as Si, are common in inorganic materials, imparting electrical conductivity to covalent three-dimensional organic polymers is challenging. Now, the synthesis of a three-dimensional π-conjugated porous organic polymer (3D p-POP) using catalyst-free Diels–Alder cycloaddition polymerization followed by acid-promoted aromatization is presented. With a surface area of 801 m² g⁻¹, full conjugation throughout the carbon backbone, and an electrical conductivity of 6(2)×10⁻⁴ S cm⁻¹ upon treatment with I₂ vapor, the 3D p-POP is the first member of a new class of permanently porous 3D organic semiconductors.     

Infrared Spectra of the HAnX and H2AnX2 Molecules (An=Th and U,X=Cl and Br) in Argon Matrices Supported by Electronic Structure Calculations

Uranium and thorium hydrides are known as functional groups for ligand stabilized complexes and as isolated molecules under matrix isolation conditions. Here, the new molecular products of the reactions of laser-ablated U and Th atoms with HCl and with HBr, namely HUCl, HUBr and HThCl, HThBr, based on their mid and far infrared spectra in solid argon, are reported. The assignment of these species is based on the close agreement between observed and calculated vibrational frequencies. The H−U and U−³⁵Cl stretching modes of HUCl were observed at 1404.6 and 323.8 cm⁻¹, respectively. Using DCl instead to form DUCl gives absorption bands at 1003.1 and 314.7 cm⁻¹. The corresponding bands of HThCl are 1483.8 (H−Th) and 1058.0 (D −Th), as well as 340.3 and 335.8 cm⁻¹ (Th−³⁵Cl), respectively. HUBr is observed at 1410.6 cm⁻¹ and the BP86 computed shift from HUCl is 6.2 cm⁻¹ in excellent agreement. The U−H stretching frequency increases from 1383.1 (HUF), 1404.6 (HUCl), 1410.6 (HUBr) to 1423.6 cm⁻¹ (UH) as less electronic charge is removed from the U−H bond by the less electronegative substituent. These U−H stretching frequencies follow the Mayer bond orders calculated for the three HUX molecules. A similar trend is found for the Th counterparts. Additional absorptions are assigned to the H₂AnX₂ molecules (An=U, Th, X=Cl, Br) formed by the exothermic reaction of a second HX molecule with the above primary products.     

Cross‐linked poly(aryl ether sulfone) membranes for direct methanol fuel cell applications

Partially sulfonated poly(aryl ether sulfone) (PESS) was synthesized and methacrylated via reaction with glycidyl methacrylate (PESSGMA) and cross‐linked via radical polymerization with styrene and vinyl‐phosphonic acid (VPA). The chemical structures of the synthesized pre‐polymers were characterized via FTIR and ¹H NMR spectroscopic methods and molecular weight was determined via GPC. Membranes of these polymers were prepared via solution casting method. The crosslinking of the PESS polymer reduced IEC, proton conductivity, swelling in water, and methanol permeability of the membranes while increasing the modulus and the glass transition temperature. However, the introduction of the VPA comonomer increased the proton conductivity while maintaining excellent resistance to methanol cross‐over, which was significantly higher as compared with both PESS and the commercial Nafion membranes. Membranes of PESSGMA copolymers incorporating VPA, exhibited proton conductivity values at 60 °C in the range of 16–32 mS cm⁻¹ and methanol permeability values in the range of 6.52 × 10⁻⁹ – 1.92 × 10⁻⁸ cm² s⁻¹. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 558–575     

Aggregation-Enhanced Emission and Thermally Activated Delayed Fluorescence of Derivatives of 9-Phenyl-9H-Carbazole: Effects of Methoxy and tert-Butyl Substituents

Derivatives of 9-phenyl-9H-carbazole were synthesized as efficient emitters exhibiting both thermally activated delayed fluorescence and aggregation-induced emission enhancement. Effects of methoxy and tert-butyl substituents at the different positions of carbazolyl groups on the properties of the emitters were studied. Depending on the substitutions, photoluminescence quantum yields (PLQY) of non-doped solid films of the compounds ranged from 17 % to 53 % which were much higher than those observed for the solutions in low-polarity solvent toluene. Compounds substituted at C-3 and C-6 positions of carbazole moiety by methoxy- and tert-butyl- groups showed the highest solid-state PLQY. Ionization potentials of the studied derivatives in solid-state were found to be in the short range of 5.75–5.89 eV. Well-balanced hole and electron mobilities were detected for tert-butyl-substituted compound. They exceeded 10⁻⁴ cm² (V×s)⁻¹ at electric fields higher than 3×10⁵ V cm⁻¹. Two compounds with the highest solid-state PLQYs showed higher efficiencies in non-doped organic light-emitting diodes than in the doped devices. Maximum external quantum efficiency of 7.2 % and brightness of 15000 cd m⁻² were observed for the best device.     

Ion implant-induced change in polyimide films monitored by variable energy positron annihilation spectroscopy

6FDA-pMDA polyimide membranes were implanted with 140 keV N⁺ ions to fluences between 2 × 10¹⁴ and 5 × 10¹⁵ cm⁻². Variable energy positron annihilation spectra were taken and spectral features compared to previously reported changes in gas permeability and permselectivity of these membranes as a function of ion fluence. Positron data corroborate the explanation of these changes in terms of molecular damage caused by the implant: for fluences up to about 1 × 10¹⁵ cm⁻², the concentration of irradiation-induced defects merely increases with implant fluence; while fluences exceeding this threshold value create a second type of positron annihilation site, thereby marking a distinct change in the structure of the polymer, which is responsible for the vast improvement of gas permselectivity data found at the same threshold fluence. PACS codes: 78.70.Bj—positron annihilation; 61.82.Pv—polymers, organic compounds; 61.72.Ww—doping and impurity implantation. © 1998 John Wiley & Sons, Inc. J. Polym. Sci. B Polym. Phys. 36: 2413–2421, 1998