HL-2A装置上超声分子束注入触发L-H转换的实验研究

利用具有定向速度的超声分子束注入技术,研究了HL-2A装置在较低加热功率条件下实现L-H转换的等离子体放电特征,从边缘密度分布的差异比较分析了普通送气和超声分子束注入对L-H转换的影响.实验结果表明,HL-2A装置上采用超声分子束注入可直接触发L-H转换,明显降低L-H转换功率.通过对大量实验数据的分析和整理发现,利用超声分子束注入实现L-H转换的最低加热功率,比同等条件下采用普通送气实现L-H转换的最低加热功率减少约10％.     

HL-2A 装置超声分子束注入缓解偏滤器靶板上边缘局域模热通量研究

在HL-2A 装置上优化和发展了偏滤器靶板上的红外测温系统,并利用该系统分析了高约束模放电期间边缘局域模的热沉积分布特性。在高约束模式放电期间,超声分子束注入使边缘局域模所引起的偏滤器靶板上瞬间热通量峰值下降了~60%,并伴随着边缘局域模爆发频率增加了2~3 倍,而等离子体储能仅下降了~8%。分析结果表明,大幅度的丝状结构在超声分子束注入之后得到了有效抑制,沉积到偏滤器靶板上的瞬间热通量峰值也随之下降。此外,在超声分子束注入之后偏滤器室内的热辐射损失大幅度增加,从而耗散了热输运所携带的部分能量,进一步分散了沉积到偏滤器靶板上的能量,有效地保护了偏滤器靶板。     

HL-2A װ�ó���������ע�뻺��ƫ�����а��ϱ�Ե����ģ��ͨ���о�

在HL-2A 装置上优化和发展了偏滤器靶板上的红外测温系统,并利用该系统分析了高约束模放电期间边缘局域模的热沉积分布特性。在高约束模式放电期间,超声分子束注入使边缘局域模所引起的偏滤器靶板上瞬间热通量峰值下降了~60%,并伴随着边缘局域模爆发频率增加了2~3 倍,而等离子体储能仅下降了~8%。分析结果表明,大幅度的丝状结构在超声分子束注入之后得到了有效抑制,沉积到偏滤器靶板上的瞬间热通量峰值也随之下降。此外,在超声分子束注入之后偏滤器室内的热辐射损失大幅度增加,从而耗散了热输运所携带的部分能量,进一步分散了沉积到偏滤器靶板上的能量,有效地保护了偏滤器靶板。     

Reduction of impurity confinement time by combined heating of LHW and ECRH in EAST

The core impurity confinement properties are experimentally investigated in the Experimental Advanced Superconducting Tokamak(EAST) plasma heated by lower hybrid wave(LHW) and electron cyclotron resonance heating(ECRH)(LHW+ECRH).It is shown that the impurity confinement time(τ_(imp)) in the L-mode plasma jointly heated by LHW and ECRH is weakly dependent on electron density but strongly dependent on the heating power,thus it is shorter than that in LHW-only heated L-mode plasma with the similar plasma parameters.The combined heating of LHW and ECRH can reduce the collisionality and indicates a more effective heating method for core τimp reduction and normalized poloidal beta(βP) ~(im)provement.It should be emphasized that in this high β_P operation window the small ELM regime can be accessed,and an L-mode level τ_(imp)(40 ms-80 ms) and high β_N(～1.7) can be obtained simultaneously.It means that this typical small ELMy H-mode regime has an advantage in avoiding the serious tungsten accumulation,and will be competitive in future long-pulse steady-state and high-performance operation with high-Z material plasma-facing components.     

HL-2A偏压偏滤器物理设计

根据已有的理论模型,推算出了HL-2A偏压偏滤器的理论电流为1．5kA、偏压电压为200V,并对HL-2A偏压偏滤器做出了初步设计。HL-2A装置采用偏压后,有可能降低L-H模转变阈功率,增加偏滤器等离子体密度、压强和滞留时间,改善约束,改善内外靶板功率沉积的非对称性,提高排灰效率及提高偏滤器性能。     

HL—1装置偏压电极类H模能量约束时间研究

能量约束时间是衡量环流器等离子体约束性能的重要参数。分析表明，在加偏压电Ｌ模过渡到类Ｈ模的过程中，如果等离子体的辐射损失功率与总损失功率之比显著变化，则扣除辐射损失的能量约束时间的增量是一种更好的衡量约束得到改善的尺度。在这种考虑之下，我们讨论ＨＬ－１等离子体偏压电极Ｌ模－类Ｈ模过的能量约束及电子热传导特性。     

HL-2M装置中心螺线管线圈电源变流器过流保护的仿真研究

利用MATLAB仿真工具，搭建HL-2M中心螺线管(CS)电源系统模型，研究了CS电源变流器过流保护策略。通过仿真研究，为HL-2M CS电源系统中变流器制定了最优的过流保护策略，这为电源安全可靠的运行提供了理论依据。     

The first results of divertor discharge and supersonic molecular beam injection on the HL-2A tokamak

HL-2A tokamak is the first tokamak with divertors in China. The plasma boundary and the position of the striking point on the target plates of the HL-2A closed divertor were simulated by the current filament code and they were in agreement with the diagnostic results in the divertor. Supersonic molecular beam injection (SMBI) system was first installed and tested on the HL-2A tokamak in 2004. In the present experiment low pressure SMBI fuelling on the HL-2A closed divertor was carried out. The experimental results indicate that the divertor was operated in the `linear regime' and during the period of SMB pulse injection into the HL-2A plasma the power density convected at the target plate surfaces was 0.4 times of that before or after the beam injection. It is a useful fuelling method for decreasing the heat load on the neutralizer plates of the divertor.     

HL-2A装置的约束改善和边界净输入功率分析

在HL-2A装置孔栏位形放电的等离子体实验中,电子回旋辅助加热期间观察到了等离子体约束改善的现象,并对等离子体从低约束模式(L模)向约束改善模式转换时的等离子体线平均电子密度、等离子体储能、分界面内辐射功率、能量约束时间、H_α辐射等进行了研究。同时,分析了电子密度和等离子体辐射功率的空间分布随时间的演化。对改善约束的相关功率(辅助加热、欧姆加热功率和损失功率)进行了分析,并研究了等离子体约束改善转换时的边界净输入功率(阈值)与电子线平均密度和环向磁场的关系。     

First Counter-NBI Experiments on the Globus-M Tokamak

A high-energy counter-NBI has been applied for the first time on the Globus-M spherical tokamak. An ELM-free H-mode has been obtained. However, no significant increase in the ion temperature and plasma energy content compared to ELMy H-mode has been observed. This is due to a high level of the fastion losses. Neither increase in the plasma current nor an increase in plasma-wall distance resulted in an increase in NB heating efficiency as it occurred during the co-NBI experiments.     

HL-2Aװ�õ�Լ�����ƺͱ߽羻���빦�ʷ���

在HL-2A装置孔栏位形放电的等离子体实验中,电子回旋辅助加热期间观察到了等离子体约束改善的现象,并对等离子体从低约束模式(L模)向约束改善模式转换时的等离子体线平均电子密度、等离子体储能、分界面内辐射功率、能量约束时间、Hα辐射等进行了研究。同时,分析了电子密度和等离子体辐射功率的空间分布随时间的演化。对改善约束的相关功率(辅助加热、欧姆加热功率和损失功率)进行了分析,并研究了等离子体约束改善转换时的边界净输入功率(阈值)与电子线平均密度和环向磁场的关系。     

基于深度学习的ELM实时识别研究

基于深度学习的方法，在HL-2A装置上开发出了一套边缘局域模(ELM)实时识别算法。算法使用5200次放电数据(约24.19万数据切片)进行学习，得到一个深度为22层的卷积神经网络。为衡量算法的识别能力，识别了HL-2A装置自2009年实现稳定ELMy H模放电以来所有历史数据(约26000次放电数据)，共识别出1665次H模放电，其中误识别35次，误报率为2.10%。在实际的1634次H模放电中，漏识别4次，漏识别率为0.24%。该误报率和漏报率可以满足ELM实时识别的精度要求。识别算法在实时控制环境下，对单个时间点的平均计算时间为0.46ms，可以满足实时控制的计算速度要求。     

HL-1M装置逃逸电子的定标律

使用一维数值模型, 推断了逃逸能量ε_r与逃逸约束时间τ_r的关系。模拟结果给出能量ε_r 和放电参数的定标律。在HL- 1M 装置中不同实验条件下测量了硬X 射线谱, 研究了逃逸电子能量 ε_r模拟的定标律, 并推导出HL- 1M 装置放电的逃逸电子的约束时间与逃逸电子扩散系数。     

利用低杂波改善约束的实验研究

介绍了在HT-6M托卡马克上,利用双低杂波的组合,成功地实现了准稳态的高约束模式运行. 能量约束时间提高两倍以上,粒子的约束在较高密度下依然改善3倍以上.通过应用波扩散及 电流径向扩散方程计算低杂波电流传播的方法,对一组典型的数据进行数值模拟.计算表明 ,在HT-6M低杂波实验中,由于纵场较低,密度较高,低杂波的能量沉积在离磁轴较远的位 置,使等离子体电流密度分布成为反剪切位形,内部输运垒地形成,大大提高了等离子体的 约束状况.实验数据也给出了反剪切的证据. 关键词： 托卡马克 低杂波 约束改善     

First observation of edge localized modes mitigation with resonant and nonresonant magnetic perturbations in ASDEX Upgrade

First experiments with nonaxisymmetric magnetic perturbations, toroidal mode number n=2, produced by newly installed in-vessel saddle coils in the ASDEX Upgrade tokamak show significant reduction of plasma energy loss and peak divertor power load associated with type-I edge localized modes (ELMs) in high-confinement mode plasmas. ELM mitigation is observed above an edge density threshold and is obtained both with magnetic perturbations that are resonant and not resonant with the edge safety factor profile. Compared with unperturbed type-I ELMy reference plasmas, plasmas with mitigated ELMs show similar confinement, similar plasma density, and lower tungsten impurity concentration.     

Density Fluctuation Measurements Using FIR Interferometer on HL-2A Tokamak

Density fluctuations were first measured in the core region of HL-2A tokamak plasma using a newly developed multi-channel FIR interferometer system. In divertor ohmic discharges, we measured the radial density fluctuation levels of 5%, which increase to 10-20% during the appearance of MHD activity. Most of the power density in the density fluctuation spectrum is directly associated with m = 2 tearing modes. The fluctuation levels reduce to 1/3 and plasma confinement is improved during off-axis electron-cyclotron-resonance heating （ECRH）.     

HL-2A装置送气和加料的脱靶特性

HL-2A装置辐射偏滤器实验采用边缘补充送气和分子束加料等方法来提高主等离子体密度,降低边缘等离子体温度、增加辐射功率分额,获得脱靶等离子体。偏滤器室内进行主动补充送气或者注入惰性气体杂质,降低偏滤器等离子体温度,获得脱靶等离子体,并首次获得了超声分子束注入产生脱靶等离子体的实验结果。利用HL-2A装置偏滤器同一极向截面内外中性化板上安装的嵌入式探针阵列和偏滤器室安装的电动探针系统,测量了偏滤器靶板上和偏滤器室的等离子体参数及其分布,并进行了相关分析和改善约束以及偏滤器脱靶等离子体运行模式下等离子体行为的研究。     

Mean and oscillating plasma flows and turbulence interactions across the L-H confinement transition

A complex interaction between turbulence driven E × B zonal flow oscillations, i.e., geodesic acoustic modes (GAMs), the turbulence, and mean equilibrium flows is observed during the low to high (L-H) plasma confinement mode transition in the ASDEX Upgrade tokamak. Below the L-H threshold at low densities a limit-cycle oscillation forms with competition between the turbulence level and the GAM flow shearing. At higher densities the cycle is diminished, while in the H mode the cycle duration becomes too short to sustain the GAM, which is replaced by large amplitude broadband flow perturbations. Initially GAM amplitude increases as the H-mode transition is approached, but is then suppressed in the H mode by enhanced mean flow shear.     

中国环流器二号A(HL-2A)超声分子束注入最新结果

HL-2A装置电子回旋共振加热时,氘脉冲超声分子束穿越分界面,等离子体各项重要参数,包括等离子体储能、极向比压、中平面线平均密度、中心密度和温度上升,中子产额急剧增加. 超声分子束注入有可能较常规脉冲送气在台基顶部提供较强的粒子源,被认为是可供ITER替换脉冲送气的加料方法之一. HL-2A装置氢超声分子束注入的平均速度约为1.7km,与溢流(分子流)注入真空的速度测量作了比较. 关键词： 超声分子束注入 托卡马克 飞行时间法 加料     

���������γɵļ�ģ��

基于托卡马克实验的L-H模转换过程中等离子体的输运特征,建立了一种简化的非线性等离子体输运模型。通过数值求解输运方程,得到了等离子体稳态温度分布剖面,成功模拟了托卡马克边缘输运势垒(ETB)的形成以及高辅助加热功率下的内部输运势垒(ITB)现象,并对比了有无输运势垒两种情况下托卡马克的能量约束效率。