联苯胺重排的反应机理

联苯胺重排是N,N’-二芳基肼在酸催化下生成4,4’-二氨基联苯的反应。对该重排反应曾有π络合物和极性过渡态两种代表性的机理。但通过同位素效应动力学研究确定该重排反应是σ迁移反应型的周环反应。本文介绍了对联苯胺重排反应机理的研究及其代表性的实例。     

三氟乙酸酐(TFAA)促进的Stieglitz重排反应制备苯胺

本工作使用简单易得的三氟乙酸酐作为活化试剂,拓展了Stieglitz重排反应的底物适用范围,发展了一种通过C—C键断裂由苯乙基羟胺制备芳基伯胺的方法.该反应条件较为温和且对官能团具有较好的兼容性.机理研究表明,反应经历了活性三氟乙酸酯中间体的原位生成,并通过C—C和N—O键的断裂实现芳基迁移的过程.     

典型频哪醇重排反应的机理及基团迁移规律的研究——一个研究型计算化学实验

频哪醇重排是本科有机化学课程的重要内容,但学生对重排机理、区域选择性和基团迁移规律不能很好地理解掌握。为了加强学生对频哪醇重排反应的理解,我们设计了一个利用计算化学方法解决有机化学问题的实验。通过直观的图像和具体的数据清楚地展现出：能形成稳定碳正离子中间体的底物主要以分步重排机理进行,而不能形成稳定中间体的底物则按协同重排机理进行。计算结果验证了反应的区域选择性取决于邻二醇质子化羟基的位置以及基团的迁移能力,明确了基团迁移能力的顺序为氢>芳基>烷基,并从微观角度对其进行了合理解释。     

无过渡金属存在下由邻卤苯酚合成邻卤二芳胺

报道了一种无过渡金属存在下(KOH/DMSO),以邻卤苯酚和2-溴-N-(芳基)丙酰胺为原料合成邻卤二芳胺的新方法,其关键步骤涉及到Smiles重排反应.该合成方法具有操作简便,原料易得,且在反应中无需使用任何过渡金属试剂的特点,具有一定的应用价值.我们使用该方法以23%~81%的产率合成了一系列邻卤二芳胺.     

钌催化N-乙酰基α-芳基乙烯胺与芳基乙烯的高化学选择性和区域选择性二聚

过渡金属催化的烯烃的二聚反应是碳-碳键形成的重要反应之一.因其原料易得、原子经济、且具有很好的工业应用前景而已得到深入、广泛的研究.系统研究了钌催化N-乙酰基烯胺与烯烃的二聚反应,发现在钌氢络合物RuHCl(CO)(PCy_3)_2的催化下可实现系列N-乙酰基α-芳基乙烯胺1与芳基乙烯4的高化学选择性和区域选择性二聚,并以高达99%的收率得到头对尾的多取代烯酰胺5.依据反应结果及反应中观测到的现象,提出了芳基乙烯4先与活化的钌氢中间体发生插入反应形成类烯丙基中间体,然后与N-乙酰基α-芳基乙烯胺1发生二聚反应生成多取代烯酰胺5的可能机理,并对反应中观测到的现象进行了合理的解释.     

铜催化N′-芳基苯磺酰肼的N′-芳基化反应

以N′-芳基苯磺酰肼作为芳基化试剂,在铜催化下,实现N′-芳基苯磺酰肼的自身N-芳基化反应。该反应以5 mol%的醋酸铜为催化剂,三乙胺为碱,甲醇为溶剂,常温下N′-芳基苯磺酰肼反应4~8 h,产率最高可达88%。产物结构经^1H NMR,^13C NMR和HR-MS(ESI)表征。     

异氰酸酯的反应≠

我们研究了芳基和烷基异氰酸酯在消耗性镁阳极存在下的有机电解反应。芳基异氰酸酯电解得N,N’-二取代脲,烷基异氰酸酯则还原偶联为N,N’-二取代草酰胺。我们认为这是由于烷基异氰酸酯从阴极得到电子发生双分子偶联,芳基异氰酸酯则是与阴极析出的高分散的活性镁起作用。     

埃罗替尼的合成

以N,N-二甲基甲酰胺和硫酸二甲酯反应生成的亚胺盐与3-乙炔基苯胺进行亲核反应及甲醇的消去,获得了制备埃罗替尼所需的重要中间体N’-(3-乙炔基苯基)-N,N-二甲基甲脒,收率为75.8%。再以此中间体与2-氨基-4,5-二(2-甲氧基乙氧基)苯甲腈通过Dimroth重排反应方便地制得了抗肿瘤药物埃罗替尼,总收率(以3-乙炔基苯胺计)为56.5%。与以往合成埃罗替尼的方法相比,该方法更经济、更绿色。     

布朗斯特酸催化下邻羟基苯乙烯与吲哚的反应——1,1-二芳基乙烷类化合物的合成

1,1-二芳基乙烷骨架存在于许多具有生物活性的分子中,该类化合物的合成受到了化学工作者的广泛关注.实现了在消旋磷酸催化下结构普通的邻羟基苯乙烯与吲哚的反应,高效高产率地合成了一系列具有结构多样性的1,1-二芳基乙烷类化合物(产率高达99%).该反应是基于邻羟基苯乙烯在消旋磷酸催化下异构化成邻亚甲基苯醌中间体,通过消旋磷酸对该中间体和吲哚的双氢键活化模式,实现该反应的高效性.该反应条件温和,底物适用性广,不仅为解决金属催化带来的金属残留、反应条件苛刻等问题提供了有效的策略,同时也拓展了利用有机小分子催化来合成1,1-二芳基乙烷类化合物的反应适用范围.     

Cu(ClO4)2诱导的N-苯基二吡啶甲基胺的邻位苯甲基化及其溴桥联铜配合物的形成

N-苯基二吡啶甲基胺和苯甲基溴在Cu(ClO4)2存在的条件下反应导致N-苯基二吡啶甲基胺的邻位苯甲基化和一个新的溴桥联的双核铜配合物的形成。实验结果显示阴离子显著影响反应的选择性,CuCl2和Cu(NO3)2不能提高N-苯基二吡啶甲基胺邻位苯甲基化的选择性。NMR和元素分析数据证实N-苯基二吡啶甲基胺邻位苯甲基化产物的形成。X-射线晶体结构数据表明溴桥联的双核铜配合物中铜原子被3个N原子,1个配位溴离子和1个μ2-桥联的溴结合形成扭曲的三角双锥的构型。研究结果表明Cu(ClO4)2可作为N-苯基二吡啶甲基胺邻位烷基化反应的催化剂。研究结果有助于设计新的选择性苯甲基化催化剂。     

Thermal rearrangements of bis-allenyl thiosulfonates. Synthesis of novel thienothiophene and thieno-oxathiine derivatives

The synthesis and thermal rearrangement of bis-allenyl thiosulfonates are described. Bis-γ,γ-disubstituted allenyl thiosulfonates have been prepared by disproportionation of the corresponding allenesulfinic acids. On heating, these compounds unexpectedly rearrange to a mixture of 1H,3H-thieno[3,4-d][1,2]oxathiine-3-oxide 8, 1H,3H-thieno[3,4-c]thiophene-2,2-dioxide 9, and 3-alkyl-4-alkenylthiophene 10. A tentative reaction mechanism involving sequential sigmatropic rearrangements and cyclizations is suggested.     

Elastic behavior of short compact chains confined in double parallel boundaries

Adsorption of short two-dimensional compact chains confined in the double attractive parallel planar boundaries is investigated by using enumeration calculation method in this paper. First, we calculate the chain size and shape of adsorbed compact chains, such as mean-square end-to-end distance per bond R²/N, mean-square radii of gyration per bond S²_x/N and S²_y/N, shape factor δ and fraction of adsorbed segments f_a to illuminate that how the size and shape of adsorbed compact chains changes during the process of tensile elongation. There are some special behaviors in the chain size and shape for strong attraction interaction. In the meantime, compact chains can reach to the stable state with large distance between two parallel boundaries D. On the other hand, some thermodynamic properties, such as average energy per bond, Helmholtz free energy per bond, elastic force f and energy contribution to elastic f_U are also investigated in order to study the elastic behavior of compact chains adsorbed on the double attractive parallel planar boundaries. These investigations may provide some insights into the thermodynamic behaviors of adsorbed compact chains.     

Effect of a third component on the interactions in a binary mixture determined from the fluctuation theory of solutions

The Kirkwood–Buff (KB) theory of solution is applied to a ternary mixture by deriving explicit expressions for the various Kirkwood–Buff integrals (KBIs) and the corresponding excesses of the number of molecules around central ones. However, the ideal solution should be considered non-aggregated, and the above expressions for the excesses provide non-zero values for such a case. For this reason, in order to obtain information about clustering one must subtract from the traditional excesses those which correspond to a reference state, thus ensuring that for an ideal mixture the excesses are zero. The expressions derived for the latter excesses have been applied to the investigation of the N,N-dimethylformamide–methanol–water mixture, to conclude that: (i) in the vicinity of the water molecules there are excesses of water and N,N-dimethylformamide molecules and a deficit of methanol molecules; (ii) in the vicinity of the methanol molecules there are excesses of methanol and N,N-dimethylformamide molecules and a deficit of water molecules; (iii) in the vicinity of the N,N-dimethylformamide molecules there are excesses of methanol and water molecules and a deficit of N,N-dimethylformamide molecules; (iiii) the excesses of N,N-dimethylformamide around water and methanol molecules and those around N,N-dimethylformamide are weakly dependent on the concentration of the third component in a large range of concentrations of the latter, and these results are compatible with the existence of N,N-dimethylformamide–water and N,N-dimethylformamide–alcohol complexes.     

Metallomicellar catalysis: effects of bridge-connecting ligands on the hydrolysis of PNPP catalyzed by Cu(II) complexes of ethoxyl-diamine ligands in micellar solution

The syntheses of three ligands are reported: N,N,N′,N′-tetra(2-hydroxyethyl)-1,3-propylene-diamine (1), N,N,N′,N′-tetra(2-hydroxyethyl)-1,10-decadiamine (2), N,N,N′,N′-tetra(2-hydroxyethyl)-1,4-xylyldiamine (3). The catalytic hydrolysis of p-nitrophenyl picolinate (PNPP) by the bivalent metal ion Cu(II) complexes of these ligands was studied kinetically in a buffered CTAB or Brij35 micellar solutions at 25 °C and different pH values. The results indicate that 1:2 and 2:1 complexes of these ligands and metal ion are the active species for the catalytic hydrolysis of PNPP in CATB and Brij35 micellar solutions. The ternary complex kinetic model for metallomicellar catalysis was employed to obtain the relative kinetic and thermodynamic parameters. The effects of the structure of the ligands and the microenvironment of reaction on the hydrolytic reaction of PNPP have been discussed in detail.     

Theoretical study of absorption and emission spectra of the monomer of PFBT

Conjugated polymers (CPs) have been used as highly responsive optical sensors for chemical and biological targets. The density functional theory (DFT), the time-dependent density functional theory (TDDFT) and the singly excited configuration interaction (CIS) approach were employed to simulate the absorption and emission spectra of a model monomer unit of the typical CP, poly[9,9′-bis-(6′-N,N,N-trimethylammonium)hexyl]fluorene-alt-4,7-(2,1,3-benzothiadiazole)] (PFBT). Various basis sets were applied in the calculations and their effects on the predictions for the optical properties of FBT are discussed. The results suggest that the TD-B3LYP method with basis sets larger than 6-311G(d,p) provides a suitable approach for investigations of the studied system.     

Estimation of type I error probability from experimental Dixon's "Q" parameter on testing for outliers within small size data sets

Common significance tests carried out using statistical software packages usually return to the user the probability p of type I error as the result. Based on p and the preset confidence level the user will decide on the acceptance or the rejection of the associated null hypothesis. Dixon's test (Q-test) is commonly used for the detection of an outlier within a set of N observations (typically: N = 3–12). Q-test can only be applied by comparing the experimental value of the statistic Q with tabulated critical Q-values corresponding to some standard values of p. Hence, for a given value of Q and a number of observations, N, the user knows only the range and not the value of the associated probability p of type I error (erroneous rejection). This is due to the lack of explicit expressions of the form p = F(Q,N). In this work, a simple stochastic (Monte Carlo) approach is presented for the estimation of p corresponding to a given experimental value of Q and size N of the data set. In addition, based on Dixon's equations, explicit expressions of p are given for N = 3 and 4.     

基于原位聚合技术构建细胞内微环境响应型DNA递送系统北大核心CSCD

传统的非病毒载体基于分子间静电自组装作用与核酸结合,组装的复合物在体内复杂的环境中容易发生结构解离,共价结合的交联聚合物载体有望成为解决传统非病毒载体结构稳定性差的有效方案。选择N-(3-氨丙基)甲基丙烯酰胺盐酸盐、1-乙烯基咪唑、2-甲基丙烯酰氧乙基磷酸胆碱与N,N′-双(丙稀酰)胱胺作为多功能性单体,采用原位聚合方法制备包载质粒DNA(pDNA)的交联聚合物-pDNA复合物。其中,共价键为载体提供优异的结构稳定性;1-乙烯基咪唑能够响应胞内溶酶体酸性微环境,触发质子海绵效应便于复合物的溶酶体逃逸;N,N′-双(丙稀酰)胱胺的二硫键可以响应胞内高水平的谷胱甘肽(GSH),实现复合物在细胞内部选择性解聚,释放内含pDNA。研究表明,该复合物平均水合半径约135 nm,ζ电势约−6.5 mV,形貌近似球形。该复合物可在10 mg/mL肝素环境中保持结构稳定性,具有响应细胞内GSH,触发释放包载核酸分子的功能。细胞实验证明该复合物细胞毒性低。细胞摄取、转染能力强。综上所述,基于原位聚合技术制备交联聚合物载体在基因递送领域具有重要应用前景,本研究为新型基因递送载体的开发提供了新思路。     

Metal complexes of biologically important ligands: Synthesis of amino acidato complexes of Pd containing a C,N-cyclometallated group as an ancillary ligand

New amino acidato complexes of Pd^II of stoichiometry [Pd(C---N)(Aa)] (C---N=C,N-cyclometallated ligand, Aa = N,O-amino acidato ligand) have been obtained by reaction of [Pd(C---N)(acac)] (C---N=N,N-dimethylbenzylamine-C²,N (dmba) (1) or N,N-dimethyl(S--phenylethyl)amine-C²,N (S-dmphea) (2)) with glycine, chiral amino acids (alanine, phenylalanine and valine), and amino acid derivatives (N-acetylglycine and N-acetyl-,β-dehydroalanine) in MeOH. The compounds are characterized by IR, ¹H and ¹³C NMR. The geometry of these complexes has been unambiguously determined by NOE difference experiments and NOESY measurements.     

Cyano-bridged bimetallic complexes of copper(II) with tetracyanonickelate(II). Crystal structure of [Cu(dpt)Ni(CN)4]

Five new complexes of composition [Cu(dpt)Ni(CN)₄] (1) (dpt=dipropylenetriamine), [Cu(dien)Ni(CN)₄]·2H₂O (2) (dien=diethylenetriamine), [Cu(N,N′-dimeen)Ni(CN)₄]·H₂O (3) (N,N′-dimeen=N,N′-dimethylethylenediamine), [Cu(N,N-dimeen)Ni(CN)₄]·H₂O (4) (N,N-dimeen=N,N-dimethylethylenediamine) and [Cu(trimeen)Ni(CN)₄] (5) (trimeen=N,N,N′-trimethylethylenediamine) have been obtained by the reactions of the mixture of Cu(ClO₄)₂·6H₂O, appropriate amine and K₂[Ni(CN)₄] in water and have been characterized by IR and UV–Vis spectroscopies and magnetic measurements. The crystal structure of [Cu(dpt)Ni(CN)₄] (1) has been determined by single-crystal X-ray analysis. The structure of 1 consists of a one-dimensional polymeric chain ---Cu(dpt)---NC---Ni(CN)₂---CN---Cu(dpt)--- in which the Cu(II) and Ni(II) atoms are linked by CN groups. The nickel atom is four coordinate with four cyanide-carbon atoms (two cyano groups are terminal and two cyano groups (in cis fashion) are bridged) in a square-planar arrangement and the copper atom is five coordinate with two cyanide-nitrogen and three dpt-nitrogen atoms, in a distorted square-pyramidal arrangement. The temperature dependence of magnetic susceptibility (2–300 K) was measured for compound 1. The magnetic investigation showed the presence of a very weak antiferromagnetic interaction (J=−0.16 cm⁻¹) between the copper atoms within each chain through the diamagnetic Ni(CN)₄ ²⁻ ions.     

Vinyl polymerization of norbornene with nickel catalysts bearing [N,N] six-membered chelate ring: Important influence of ligand structure on activity

Norbornene polymerizations with nickel complexes bearing [N,N] six-membered chelate ring activated with methylaluminoxane were investigated. The influence of ligand structure such as β-diimine, β-diketiminate, fluorinated β-diketiminate, and anilido-imine ligand on catalytic activities for norbornene polymerization was evaluated in detail. Ligands led to different electrophilicity of the nickel metal center, and a relatively positive nickel metal center would result in high catalytic activities for norbornene polymerization. The influences of polymerization temperature and Al/Ni ratio on norbornene polymerization with nickel catalysts bearing β-diimine, β-diketiminate, and fluorinated β-diketiminate ligands were also examined. All of the obtained polymers catalyzed by these nickel catalysts bearing [N,N] ligand are vinylic addition polynorbornenes with different molecular weights.