CH2Br2的同步辐射光电离研究:10—12eV范围内CH2Br2的振动自电离态

报道在超声射流冷却条件下用同步辐射ＶＵＶ光源研究ＣＨ₂Ｂｒ₂的振动自电离结构．根据测量的１０５—１２３ｎｍ范围内母体离子（ＣＨ₂Ｂｒ₂⁺）的光电离产率曲线，获得ＣＨ₂Ｂｒ₂的绝热电离势为１０.２３±０.０１ｅＶ．ＣＨ₂Ｂｒ₂⁺的最低三个电子激发态，即Ａ（²Ａ₂），Ｂ（²Ｂ₁），Ｃ（²Ａ₁）分别位于１０.７８±０.０１ｅＶ，１１.２０±０.０１ｅＶ和１１.２７±０.０１ｅＶ．在１１５.０１—１２１.１５ｎｍ范围内，观察到ＣＨ₂Ｂｒ₂自电离峰叠加在若干台阶结构上，台阶平均宽度为７１６.８±４０.０ｃｍ^-1，对应于ＣＨ₂Ｂｒ₂⁺（Ｘ²Ｂ₂）中Ｂｒ-Ｃ-Ｂｒ反对称的伸缩振动（ｖ₉），所有的峰均归属为收敛于ＣＨ₂Ｂｒ₂⁺（Ｘ²Ｂ₂，ｖ⁺）振动能级的ｎｓ，ｎｐ和ｎｄ自电离Ｒｙｄｂｅｒｇ态．此外，对ＣＨ₂Ｂｒ₂光解离电离产生离子型自由基ＣＨ₂Ｂｒ⁺（Ｘ）的光电离产率曲线的结构也进行了归属 关键词：     

非晶Fe89.7P10.3合金纳米线阵列的磁性研究

利用电化学沉积方法在阳极氧化铝模板中制备了Fe_89.7P_10.3非晶 合金纳 米线阵列.利用x射线衍射仪、透射电子显微镜、振动样品磁强计和穆斯堡尔谱仪研究了样品的结构和磁性,发现纳米线阵列是非晶结构，且拥有垂直磁各向异性和高的矫顽力，H_c =304×10⁴A/m.纳米线内部的平均超精细场和平均同质异能移分别为2 15×10⁶ A/m和007 mm/s；而纳米线末端的平均超精细场（233×10⁶ A/m ）大于内 部的值，平均同质异能移（004 mm/s）小于内部的值.另外，纳米线内部Fe原子磁矩与线轴的夹角约为16°，而在纳米线末端Fe原子磁矩与线轴的夹角约为28°.这些结果表明，由于形状各 向异性，在纳米线中实现了无序非晶合金磁矩的有序排列. 关键词： 非晶合金 纳米线阵列 垂直磁各向异性 穆斯堡尔谱     

Ba10(PO4)4(SiO4)2∶Eu2+荧光体的光谱特性

采用高温固相法合成了荧光体Ba₁₀（PO₄）₄（SiO₄）₂：Ce³⁺和Ba₁₀（PO₄）₄（SiO₄）₂：Eu²⁺,研究了两种荧光体的光谱特性。结果表明,两者都呈现较强的宽带激发特征。根据同种基质中Eu²⁺和Ce³⁺两种离子光谱特征的相关性,通过测得的Ba₁₀（PO₄）₂（SiO₄）₂基质中Ce³⁺的光谱数据估算了Ba₁₀（PO₄）₂（SiO₄）₂：Eu²⁺中Eu²⁺的斯托克斯位移（ΔS）和激发能量,估算结果与Ba₁₀（PO₄）₂（SiO₄）₂：Eu²⁺样品的光谱分析结果十分吻合。Ba₁₀（PO₄）₂（SiO₄）₂：Eu²⁺可以同时被紫光和蓝光激发,发出偏白的绿光,可用作白光LED的荧光粉。     

利用Er3+光学温度传感特性研究Tm3+/Yb3+掺杂NaY(WO4)2微米球的激光辐照热效应

采用微波水热方法合成了Er³⁺/Yb³⁺及Tm³⁺/Yb³⁺两个共掺杂的绣球花状NaY（WO₄）₂微米球样品。XRD结果表明所获得的产物为纯相体心结构的NaY（WO₄）₂,利用SEM观察发现产物粒子结构为纳米片组装成的绣球花状。考虑到红外激光辐照对样品产生加热效应,采用380 nm激发下不同温度的发射光谱获得了Er³⁺/Yb³⁺共掺杂NaY（WO₄）₂微米球的温度传感特性曲线和灵敏度曲线。把Er³⁺/Yb³⁺共掺杂NaY（WO₄）₂与Tm³⁺/Yb³⁺共掺杂的NaY（WO₄）₂按质量比1：10进行混合,采用980 nm激发测量了混合物的上转换发光光谱,研究了激光持续辐照对Tm³⁺/Yb³⁺掺杂NaY（WO₄）₂样品的加热效应和Tm³⁺的¹G₄→³H₆ 跃迁发光强度随激光辐照时间的变化。实验发现980 nm激光辐照使Tm³⁺/Yb³⁺掺杂NaY（WO₄）₂样品的温度持续升高并达到某一平衡温度,Tm³⁺的蓝色上转换发光也随着激光辐照时间的延长而增强,最后达到饱和。此外,在相同条件下,Tm³⁺/Yb³⁺共掺杂样品的激光辐照热效应比Er³⁺/Yb³⁺共掺杂样品的热效应更为显著。     

Er,Yb：(LaLu)2O3透明陶瓷制备及上转换发光性能

采用柠檬酸燃烧法制备Er,Yb：（LaLu）₂O₃陶瓷粉体,用X射线衍射对其进行了物相鉴定,研究表明1 000℃时已经得到纯相的（LaLu）₂O₃。采用冷等静压-真空烧结法制备了Er,Yb：（LaLu）₂O₃和Er：（LaLu）₂O₃陶瓷,对陶瓷的结构和光谱性能进行了详细的研究,研究发现掺杂5% Yb³⁺和10% La³⁺样品的上转换发光强度与未掺Yb³⁺、La³⁺样品相比明显增大,根据上转换光谱显示较强发射峰位于564 nm和661 nm处,对应Er³⁺的⁴S_3/2（²H_11/2）→⁴I_15/2能级跃迁和⁴F_9/2→⁴I_15/2能级跃迁,并讨论了Er³⁺-Yb³⁺的能量传递过程及其上转换发光机制。     

Si中S0对、Se0对和Te0对的电子结构

利用紧束缚近似下的格林函数方法,讨论了Si中(S⁰)₂,(Se⁰)₂及(Te⁰)₂基态的能级和波函数。分析了几种不同的观点。(S⁰)₂,(Se⁰)₂及(Te⁰)₂均在禁带中引入一个对称性的A_1g能级和一个反对称性的A_2u能级,二者都是填满的。现有实验观测到的是较高的A_1g能级。从理论上指出了对称性的A_1g能级反而高于反对称性的能级的原因。而Si中(Se₂)⁺的g因子测量值和(S₂)⁺,(Se₂)⁺的ESR实验结果也支持本文的观点。 关键词：     

SrZn2(PO4)2:Sn2+,Mn2+荧光粉的发光性质及其能量传递机理

采用高温固相法制备了SrZn₂(PO₄)₂:Sn²⁺(SZ₂P:Sn²⁺), SrZn₂(PO₄)₂:Mn²⁺(SZ₂P:Mn²⁺), SrZn₂ (PO₄)₂:Sn²⁺, Mn²⁺(SZ₂P:Sn²⁺, Mn²⁺) 荧光粉. 通过X射线衍射、激发和发射光谱详细研究了荧光粉的物相和发光性质. 在SrZn₂(PO₄)₂ 基质中, Sn²⁺离子发射光谱是峰值位于461 nm宽带谱, 归属于Sn²⁺离子的³P₁→¹S₀能级跃迁, SZ₂P:Mn²⁺激发光谱由基质吸收带(200–300 nm)和位于352, 373, 419, 431和466 nm的一系列激发峰组成, 分别对应Mn²⁺离子的⁶A₁(⁶S)→⁴E(⁴D), ⁶A₁(⁶S)→⁴T₂(⁴D), ⁶A₁(⁶S)→[⁴A₁(⁴G), ⁴E(⁴G)], ⁶A₁(⁶S)→⁴T₂(⁴G)和⁶A₁(⁶S)→⁴T₁(⁴G)能级跃迁, 因此, SZ₂P:Sn²⁺ 的发射光谱与SZ₂P:Mn²⁺的激发光谱有较大范围的重叠. 结果表明Sn²⁺对Mn²⁺发光有明显的敏化作用. 基于Dexter电多极相互作用能量传递公式和Reisfeld近似原理分析, 荧光粉SZ₂P:Sn²⁺, Mn²⁺中Sn²⁺-Mn²⁺离子之间的能量传递机理属于电四极-电四极相互作用引起的共振能量传递, 并计算出Sn²⁺-Mn²⁺离子之间能量传递临界距离R_c ≈ 1.78 nm. 通过改变Sn²⁺, Mn²⁺离子掺杂浓度, 实现了荧光粉发光颜色的调节, 在254 nm短波紫外激发下荧光粉发出较强的蓝白光. 研究结果表明SZ₂P:Sn²⁺, Mn²⁺荧光粉有望应用于紧凑型节能灯照明领域, 随着半导体紫外芯片技术的发展, 有潜力应用于未来的白光发光二极管照明领域.     

R1-xPrxBa2Cu3O7-δ超导Tc平台的离子尺寸效应

系统地研究了Ｒ_1-xＰｒ_xＢａ₂Ｃｕ₃Ｏ_7-δ的超导Ｔ_c与Ｐｒ替代浓度ｘ的关系。发现在离子半径ｒ_i≤ｒ_i（Ｄｙ）时，在低Ｐｒ浓度范围内存在一个超导Ｔ_c平台，并且平台宽度表明一个Ｒ^３＋离子尺寸效应。我们认为，Ｔ_c平台宽度的离子尺寸效应可能起源于Ｐｒ４ｆ电子局域态的改变。提出一个临界Ｒ^３＋离子半径ｒ_ic，ｒ_i＞ｒ_ic时ＲＢａ₂Ｃｕ₃Ｏ_7-δ的超导电性消失 关键词：     

CEMS和慢正电子束研究ZrO2(Y)中Fe的热动力学行为

用内转换电子穆斯堡尔谱（ＣＥＭＳ）和慢正电子束研究了含３％Ｙ₂Ｏ₃的ＺｒＯ₂中⁵⁷Ｆｅ离子（１００ｋｅＶ，３×１０¹⁶ａｔ．／ｃｍ²）注入态及其在氢气氛中退火的热力学行为．注入态以Ｆｅ³⁺，Ｆｅ²⁺和Ｆｅ⁰存在，它们分别是Ｆｅ³⁺-Ｖ（空位）复合体、二聚体和超顺磁颗粒．经４００，５００℃退火后，Ｆｅ³⁺-Ｖ分解，分别出现了α-Ｆｅ的前期相和α-Ｆｅ纳米颗粒．含Ｆｅ的ＺｒＯ₂（Ｙ）混合导电的出现可能是和Ｆｅ的不同价态及其相对含量有关 关键词：     

BaF2晶体的取向和入射束的剂量对溅射的影响

２７ｋｅＶ Ａｒ^＋离子束沿法向分别入射在ＢａＦ₂单晶（１１１），（１００）和（１１０）的晶面上，用捕获器方法和Ｒｕｔｈｅｒｆｏｒｄ背散射分析法测定了Ｂａ原子的溅射角分布和溅射产额。结果发现不同取向的晶体表面，它们的溅射产额有明显差异。当用剂量为５×１０¹⁷ｉｏｎ／ｃｍ²的Ａｒ^＋离子分别轰击这三种晶面时，其溅射产额的顺序Ｙ_１００＞ｙ_１１１＞ｙ_１１０．对已被上述剂量辐照过的晶面再作相同剂量轰击时，测得的溅射产额明显增大。这些结果被认为是由于在离子辐照过程中表面晶格受损逐步增大所致。 关键词：     

Out-of-plane coercive field of Ni80Fe20 antidot arrays

The out-of-plane magnetic anisotropy and out-of-plane magnetization reversal process of nanoscale Ni₈₀Fe₂₀ antidot arrays deposited by magnetron sputtering technique on an anodic aluminum oxide (AAO) membrane are investigated. The angular dependence of out-of-plane remanent magnetization of Ni₈₀Fe₂₀ antidot arrays shows that the maximum remanence is in-plane and the squareness of the out-of-plane hysteresis loop follow a |cos θ| dependence. The angular dependence of out-of-plane coercivity of Ni₈₀Fe₂₀ antidot arrays shows that the maximum coercivity lies on the surface of a cone with its symmetric axis normal to the sample plane, which indicates a transition of magnetic reversal from curling to coherent rotation when changing the angle between the applied magnetic field and the sample plane.     

metamagnetic behavior of linear chain pyridine compounds: Co(Pyridine)2Cl2, Fe(Pyridine)2Cl2, Fe(Pyridine)2(NCS)2 and Ni(Pyridine)2Cl2

Magnetic phase transitions in the pyridine (pyr) compounds Co(pyr)₂Cl₂, Fe(pyr)₂Cl₂, Fe(pyr)₂(NCS)₂ and Ni(pyr)₂Cl₂ have been observed at applied magnetic fields of ～0.7, 0.7, 1.1 and 2.7 kG respectively. These low field phase transitions are observed in the Fe and Ni compounds at T = 4.2 K, and in the Co compound at T < 3K, and are consistent with metamagnetic behavior. Magnetic saturation is not achieved in any of these compounds for fields of 60 kG, reflecting high anisotropy.     

Radiation-induced defects in amorphous Pd80Si20

Irradiation of the metallic glass Pd₈₀Si₂₀ with high energy Ar-ions at low temperatures resulted in electrical resistance increases of about 5% at a measuring temperature of 10 K after fluences of 3·10¹⁵ Ar/cm² indicating that defects were created by radiation damage. Annealing experiments were performed up to 150°C showing a smooth recovery throughout the whole temperature range.     

Synthesis and characterization of electrodeposited permalloy (Ni80Fe20)/Cu multilayered nanowires

Permalloy (Ni₈₀Fe₂₀)/Cu multilayered nanowires (NWs) were electrodeposited using a template directed method from sulfate baths via pulse potential technique. Microstructures and compositions of the nanowires were characterized using various microscopy and spectroscopy techniques. To synthesize compositionally uniform nanowires with high efficiency, new sulfate baths with a high content of Ni²⁺ were developed. The effects of deposition potential and concentration of metal ions were optimized to reduce composition inhomogeneity and incorporation of copper in the permalloy layers. Composition of the NiFe layers was found to be close to 20 at% Fe with a maximum of 5 at% Cu. TEM analysis indicated that individual nanowires exhibit distinct and coherent layering structure with rough and wavy interfaces. A synthesized single nanowire was also AC dielectrophoretically assembled across the microfabricated gold electrodes for subsequent magnetoresistance measurements.     

Synthesis and magnetic properties of Au-coated amorphous Fe20Ni80 nanoparticles

Gold-coated nanoparticles of Fe₂₀Ni₈₀ (permalloy) have been synthesized by a microemulsion process. The as-prepared samples consist of ∼5 nm diameter particles of amorphous Fe₂₀Ni₈₀ that are likely encapsulated in B₂O₃. One or more Fe₂₀Ni₈₀@B₂O₃ particles are subsequently encapsulated in 8-20 nm gold nanospheres, as determined by TEM and X-ray powder diffraction (XRD) line broadening. The gold shells were found to be under expansive strain. Magnetic data confirm the existence of a superparamagnetic phase with a blocking temperature, T_B, of ∼33 K. The saturation magnetization, M_S, of the as-prepared, Au-coated sample is ∼65 emu g⁻¹ at 5 K and ∼16 emu g⁻¹ at 300 K. The coercivity, H_C, is ∼280 Oe at 5 K.     

Hyperfine field distribution in amorphous Fe40Ni40B20

From the Mössbauer investigation of amorphous Fe₄₀Ni₄₀B₂₀ and Fe₈₀B₂₀ alloys it was found that the substitution of Fe by Ni only shifts but does not influence the shape of the iron hyperfine field distribution contrary to that of crystalline f.c.c. Ni-Fe alloys suggesting a rather localized type of behaviour. The distributions of the linear combinations of isomer shift and quadrupole splitting are affected by this substitution.     

Mossbauer effect in (Fe1−xNix)80Mn20 alloys

Mossbauer spectra for Fe⁵⁷ nuclei in (Fe_1?xNi_x)₈₀Mn₂₀ alloys at 300°K and 80°K were measured. It was shown that substitution of Fe atoms by Ni atoms leads to a decrease in the effective magnetic field on the resonance nuclei. The results of these studies are interpreted proceeding on the basis of a model of mixed-exchange interaction. The type of spectra and a detailed analysis of the half-widths of the separate components of the ultrafine magnetic structure does not exclude the influence of relaxation phenomena.     

Molecular material—{N(n-C4H9)4[Ni(II)0.5 Fe(II)0.5 Fe(III)(C2O4)3]}∞: Magnetic, Mössbauer and electrical conductivity studies

We have attempted to characterize the magnetic and electrical properties of a new mixed-metal molecular material {NBu₄[Ni(II)_0.5Fe(II)_0.5Fe(III)(ox)₃]}_N synthesized by the use of trioxalatoferrate as the building block. Mössbauer spectroscopy was utilized in order to understand local spin structures in this compound. The results indicate that the compound is a semiconducting ferrimagnet with T_N=30 K and room temperature conductivity of 6×10⁻¹⁵ Ω⁻¹ cm⁻¹ along with 1.8 eV activation energy under dark. The compound has no appreciable electrical response towards illumination.     

Current density effect on magnetic properties of nanocrystalline electroplated Ni80Fe20/Cu composite wires

In developing high-sensitivity micro sensors for very weak magnetic field, extremely high permeability magnetic material is essential for the sensing element. In this study, the effect of plating current density in nanocrystalline electrodeposition of permalloy on the crystal grain size and consequently on the soft magnetic properties of the deposited layer of Ni₈₀Fe₂₀/Cu composite wire is investigated. It is found that the coercivity of the deposited Ni₈₀Fe₂₀ increases and the MI effect ratio of the Ni₈₀Fe₂₀/Cu wire decreases with increasing current density in the lower range of current density (0.6–2 A/dm²) while the opposite trend is observed as the current density range increases in a higher range (2–8 A/dm²). It seems that increasing plating current density has the effect of decreasing the crystal grain size of the plated material, resulting in lower coercivity of the plated material. This effect, due to decreased grain size, is dominating in the higher range of plating current density. However, it also has the effect of increasing residual stresses in the plated material, which is dominating in the lower range of plating current density, resulting in higher coercivity of the plated materials.     

Electrical and magnetic characterization of a molecular material {[Ru(bpy)3][Fe(dca)3]2}n

Electrical and magnetic properties of {[Ru(bpy)₃][Fe(dca)₃]₂}_n (bpy=2,2′-bipyridine, dca=dicyanamide) have been studied. The compound is a non-extrinsic type of semiconductor and paramagnetic in nature. Mössbauer spectroscopy has established the presence of high spin Fe(II) as one major species in this compound, and no high spin-low spin transition of Fe(II) was detected down to 80 K under dark. The photo-response of electrical conductivity with time shows interesting behavior with repeated exposure.