Synthesis,Structure and Characterization of Three Metal Molybdate Hydrates: Fe(H2O)2(MoO4)2·H3O,NaCo2(MoO4)2(H3O2)and Mn2(MoO4)3·2H3O

Three metal molybdate hydrates,Fe(H2O)2(MoO4)2·H3O(FeMo),NaCo2(MoO4)2(H3O2)(CoMo)and Mn2(MoO4)3·2H3O(MnMo),were synthesized by the mixed-solvent-thermal methods and characterized by singlecrystal X-ray...     

利用原位APXPS与STM研究H2在ZnO(10${\rm{\bar 1}}$0)表面的活化

Cu/ZnO/Al₂O₃是工业中最广泛使用的甲醇合成催化剂。然而该催化反应的活性位点和机理目前仍存争议。H₂作为反应物之一,研究其在ZnO表面的活化和解离对于弄清甲醇合成反应的催化机理具有重要的帮助。本工作利用近常压光电子能谱(APXPS)和扫描隧道显微镜(STM)原位研究了H₂在ZnO(10${\rm{\bar 1}}$0)表面上的活化和解离。APXPS结果表明：在0.3 mbar (1 mbar = 100 Pa)的H₂气氛中,室温下ZnO表面形成羟基(OH)吸附物种。STM实验发现通入H₂后ZnO表面发生了(1×1)到(2×1)的重构。上述结果和原子H在ZnO(10${\rm{\bar 1}}$0)表面的吸附结果一致。然而吸附H₂O可以导致同样的现象。因此,我们还开展了H₂O在ZnO(10${\rm{\bar 1}}$0)表面吸附的对比实验。结果表明：H₂气氛中ZnO表面发生0.3 eV的能带弯曲,而H₂O吸附实验中几乎观察不到能带弯曲发生。同时,热稳定性实验表明H₂气氛中ZnO表面的OH不同于H₂O解离吸附产生的OH,前者具有更高的脱附温度。因此,本工作的结果表明常温和常压下H₂在ZnO(10${\rm{\bar 1}}$0)表面发生解离吸附。这一结果和以往超高真空下未发现H₂在ZnO(10${\rm{\bar 1}}$0)表面上的解离不同,说明H₂的活化是一个压力依赖过程。     

两个基于氢键构筑的超分子镁配合物的合成、 晶体结构及荧光性质

以5,6-苯并咪唑二酸(H₃bidc)为有机配体, 在水热条件下通过控制反应温度得到了2个镁配合物[Mg(Hbidc)(H₂O)₄](1) 和 [Mg(Hbidc)(H₂O)₅]·4H₂O(2). 通过单晶及粉末X 射线衍射、 红外光谱、 元素分析和热重分析对配合物进行了表征. 结果表明, 配合物1和2均为单核分子, 分别以不同的堆积方式通过氢键构筑成三维超分子结构. 值得注意的是, 配合物2的结构中捕获了由氢键连接的环状四聚体水簇(H₂O)₄. 配合物1和2的电荷布居分析结果与晶体结构的讨论一致. 此外, 固体荧光分析表明, 配合物1和2在室温下具有较强的蓝光发射.     

The ternary system H2O–Fe(NO3)3–Co(NO3)2 isotherms 0 and 15 °C

The solid–liquid equilibria of the ternary system H₂O–Fe(NO₃)₃–Co(NO₃)₂ were studied by using a synthetic method based on conductivity measurements.

Two isotherms were established at 0 and 15 °C, and the stable solid phases which appear are the iron nitrate nonahydrate (Fe(NO₃)₃·9H₂O), the iron nitrate hexahydrate (Fe(NO₃)₃·6H₂O), the cobalt nitrate hexahydrate (Co(NO₃)₂·6H₂O) and the cobalt nitrate trihydrate (Co(NO₃)₂·3H₂O).     

二苯羧酸类稀土配合物对藤黄微球菌抑制作用的微量热研究

合成了4例二苯羧酸类稀土配合物:[Re_2(oba)_3(H_2O)_5]·H_2O[Re=La(1)、Ce(2)、Sm(3)、Er(4)](oba=4,4'-二羧基二苯基醚),利用元素分析、红外光谱和粉末X射线衍射等技术手段对其结构及组成进行了表征,热重分析表明,4例配合物具有良好的热稳定性。采用微量热法,实时跟踪监测4种目标配合物对藤黄微球菌的抑制作用,得到了热谱曲线。依据热动力学模型对热谱曲线进行解析,计算了生长和抑制过程的热动力学函数,在不同浓度配合物存在时,获得了细菌生长速率常数(k)、最大产热功率(P_(max))、传代时间(t_G)以及抑制率(I)等参数。结果表明,4种配合物对藤黄微球菌均具有抑制作用,抑菌效果依次为:[Er_2(oba)_3(H_2O)_5]·H_2O(4)[Sm_2(oba)_3(H_2O)_5]·H_2O(3)[Ce_2(oba)_3(H_2O)_5]·H_2O(2)[La_2(oba)_3(H_2O)_5]·H_2O(1)。     

水蒸气和α-Fe_2O_3对铈改性半焦脱除单质汞的影响研究

采用浸渍法制备了铈改性半焦吸附剂(Ce/SC),在小型固定床反应器上考察了水蒸气和α-Fe_2O_3对Ce/SC脱除Hg~0性能的影响,并利用X射线衍射、H2程序升温还原、X射线光电子能谱等分析手段对其机理进行了探究。结果表明,水蒸气会明显抑制Ce/SC对单质汞的脱除效率,原因是H_2O分子在活性组分CeO_2表面发生解离,部分晶格氧转化成Ce-OH官能团,从而导致其氧化活性的降低;α-Fe_2O_3的加入对Ce/SC的脱汞性能无显著影响;当水蒸气和α-Fe_2O_3同时存在时,Ce/SC的脱汞效率虽然有所降低,但是其降低幅度明显低于水蒸气单独作用时的情况,这主要是因为水蒸气与α-Fe_2O_3作用增加了其表面化学吸附氧的含量,提高了α-Fe_2O_3的氧化活性,促进单质汞的氧化和脱除。     

Zr改性MnO_x/MWCNTs催化剂的结构特征与低温SCR活性

以ZrO(NO3)2·2H2O为前驱体对多壁碳纳米管(MWCNTs)进行了改性并负载MnOx制备了MnOx/ZrO2/MWCNTs催化剂.考察了Zr对催化剂低温选择性催化还原(SCR)反应活性的影响,并通过多种分析手段对催化剂的结构进行了表征.结果表明Zr的添加对催化剂的低温SCR活性具有显著的促进作用,当Zr负载量为30%时,催化剂活性最佳.X射线衍射(XRD)、拉曼(Raman)光谱、透射电镜(TEM)、N2吸附-脱附的表征结果分析表明,适量的Zr改性促进了MnOx在载体表面的分散,增强金属氧化物与MWCNTs之间的作用,也能增加催化剂的比表面积、孔容和孔径.X射线光电子能谱(XPS)、H2程序升温还原(H2-TPR)和NH3程序升温脱附(NH3-TPD)的分析结果则显示,Zr能提高催化剂表面化学吸附氧浓度,促进Mn3+转化为Mn4+,从而使催化剂表面的活性位点增多,氧化还原能力增强,同时还提高了催化剂表面酸性位点的数量和强度,促进了NH3的吸附,是MnOx/ZrO2/MWCNTs催化剂低温SCR活性提高的主要原因.     

乙二胺三乙酸与锌(Ⅱ)、钴(Ⅱ)相互作用的固体和溶液化学特性

在水热和弱酸性反应条件下,螯合型表面活性剂前驱体乙二胺三乙酸分别与氯化锌、氯化钴反应,形成水合乙二胺三乙酸金属配合物[M(H₂O)₆][M(ED3A)(H₂O)]₂·2H₂O[M=Zn(1),Co(2);H₃ED3A=乙二胺三乙酸,C₈H₁₄N₂O₆]。 产物经元素分析、红外、热重、液体核磁共振和X射线单晶衍射结构表征。 乙二胺三乙酸和锌(Ⅱ)、钴(Ⅱ)五配位,并与水一起形成典型的[MN₂O₄]或[MO₆]八面体结构。 ¹³C核磁共振实验结果表明,溶液中乙二胺三乙酸与锌形成配合物在弱酸性条件下(pH值3~7)稳定存在,在酸性溶液中完全解离,乙二胺三乙酸进一步经分子内成环反应生成3-酮哌嗪二乙酸(H₂kpda=C₈H₁₂N₂O₅)。     

Crystal structure and physico-chemical properties of diaquabis(1,10-phenanthroline)manganese(II) disaccharinate monohydrate

A novel manganese complex, [Mn(phen)₂(H₂O)₂](sac)₂·H₂O, was synthesized by the reaction of [Mn(sac)₂(H₂O)₄]·2H₂O with 1,10-phenantroline in aqueous solution and characterized by elemental analysis, IR spectral evidence, magnetic measurements, thermal analysis and single crystal X-ray diffraction. The compound crystallizes in triclinic system, space group P-1, with Z=2. The saccharinate ions do not coordinate the central metal, instead are present as the complementary anions. In the complex cation, Mn(II) is coordinated by two phen and two aqua ligands, and exhibits a distorted octahedral coordination with a high-spin configuration. The presence of lattice and coordinate water molecules are also confirmed by thermal analysis and IR spectroscopy.     

系列Ln(Ⅲ)配聚物的合成、结构及近红外发光性能

通过水热反应合成5种结构新颖的配聚物:{[Ln_2(1,3-bdc)_3(H_2O)_4](DMF(H_2O}_n[Ln=Pr(1),Nd(2),Gd(3)]和{[Ln_4(1,3-bdc)_6(H_2O)_4(DMF)](DMF(2H_2O}_n[Ln=Er(4),Ho(5)](1,3-bdc:间苯二甲酸,DMF:N,N-二甲基酰胺)。通过单晶X射线衍射、红外光谱、紫外-可见-近红外(UV-Vis-NIR)光谱、荧光光谱等技术手段对产物的结构和性能进行了表征。结果表明,配聚物1~3是同构的,属单斜晶系,P2(1)/n空间群;配聚物4、5是同构的,属三斜晶系,P-1空间群。在晶体中,间苯二甲酸根采用多样的配位模式,使配聚物呈现多维的结构。除配聚物4,其余均呈现Ln(Ⅲ)的特征NIR发光,并与其UV-Vis-NIR吸收光谱相关联。     

系列Cu(Ⅱ/Ⅰ)配聚物的合成、结构及光电性能

采用水热方法合成了3种Cu(Ⅱ/Ⅰ)配聚物及超分子, (1) [K₂Cu₂(ox)(btec)(MeOH)₂]_n, (2) {[Cu(pdc)(H₂O)₂]?H₂O}_n, (3) [Cu(cyan)(phen)]?H₂O (H₂ox: 草酸, H₄btec: 均苯四甲酸, MeOH: 甲醇, H₂pdc: 2, 5-吡啶二羧酸, phen: 邻菲啰啉, Hcyan: 氰尿酸). 通过X射线单晶衍射、表面光电压光谱(SPS)、固体紫外-可见(UV-Vis)、傅里叶变换红外(FTIR)光谱、元素分析等方法对配合物进行了表征. 结构解析结果表明, 配合物(1)是具有三维(3D)无限结构的配聚物; (2)是具有二维(2D)无限结构的配聚物, 但又通过氢键进一步连成了三维(3D)网络, (1)与(2)的中心金属均为Cu(II)离子; (3)为含Cu(I)的单核配合物, 但又通过氢键和π-π堆积作用, 使它成为2D超分子化合物. 配合物SPS结果显示, 配合物(1)-(3)在300-800 nm范围内都呈现光伏响应, 表明三者均具有一定的光电转换能力. 讨论了配合物的组成、结构、维数、配体种类、中心金属离子价态及配位微环境对SPS的影响,并将SPS与UV-Vis 光谱进行了关联.     

铜掺氧化锌多孔纳米棒的水热合成及其光催化性能

通过两步法合成铜掺杂的氧化锌纳米棒,通过X射线衍射（XRD）、扫描电子显微镜（FESEM）、透射电子显微镜（TEM）、X射线光电子能谱（XPS）和紫外-可见（UV-Vis）分光光谱等技术对系列样品进行了表征,研究并探索了铜掺杂的氧化锌纳米棒光降解染料罗丹明B（RhB）和气体乙醛的催化活性。通过对多孔Cu掺杂ZnO纳米棒光催化分解乙醛进行了评价。多孔Cu掺杂ZnO纳米棒（CZ-5）光催化剂具有最高的催化分解乙醛的能力,比其它多孔Cu掺杂ZnO纳米棒具有很高的催化活性。多孔Cu掺杂ZnO纳米棒光催化剂在室温下在可见光（435 nm）下照射16 h,5.50×10^-4（φ,体积分数）的乙醛气体完全降解为二氧化碳（CO₂）。多孔铜掺杂的氧化锌纳米棒光催化剂的光催化性能的改善主要归因于铜和氧化锌纳米棒之间的协同作用。这种改进的光催化协同作用归因于Cu掺杂ZnO的可见光吸收的延伸和光生电子空穴对的抗重组。     

Structural diversity of lanthanide–amino acid complexes under near physiological pH conditions and their recognition of single-stranded DNA

We reported here four structures of lanthanide–amino acid complexes obtained under near physiological pH conditions and their individual formula can be described as [Tb₂(dl-Cys)₄(H₂O)₈]Cl₂ (1), [Eu₄(μ₃-OH)₄(l-Asp)₂(l-HAsp)₃(H₂O)₇] Cl · 11.5H₂O (2), [Eu₈(l-HVal)₁₆(H₂O)₃₂]Cl₂₄ · 12.5H₂O (3), and [Tb₂(dl-HVal)₄(H₂O)₈]Cl₆ · 2H₂O (4). These complexes showed diverse structures and have shown potential application in DNA detection. We studied the interactions of the complexes with five single-stranded DNA and found different fluorescence enhancement, binding affinity and binding stoichiometry when the complexes are bound to DNA.     

钛纳米管负载锰催化剂的低温选择性催化还原脱硝性能

采用水热法合成了钛纳米管（TiNT）,以400℃焙烧后得到的TiO₂纳米管为载体,采用浸渍法制备了MnO_x/TiNT催化剂,用于低温NH₃选择性催化还原脱NO反应（SCR）。BET、TEM、XRD及TG测试表明,经过400℃焙烧之后的钛纳米管主要成分为锐钛矿型TiO₂,所制备的催化剂活性组分分散性较好。在模拟烟气条件下,考察了锰负载量、空速、O₂含量、氨氮比及进口NO浓度对MnO_x/TiNT的SCR催化性能的影响。在150℃、\[NH₃\]/\[NO\]比为1.2、O₂浓度为3%、NO浓度为0.06%、空速GHSV为23613.8h^-1、Mn的负载量为5%~15%的条件下,NO的转化率达到95%以上。反应气氛中单独通入水会造成催化剂的活性下降;切断H₂O,催化剂的活性可以恢复至初始水平。温度越高,催化剂抗水性能越好,而且水存在情况下的抗硫性能优于其单独抗硫性能。再次切断H₂O和SO₂,催化剂的活性逐渐上升,但不能恢复到初始水平。     

Synthesis and Conductivity of Undecatungstocobaltoruthenic Polyoxometallic Acid

Undecatungstocobaltoruthenic polyoxometallic acid H₇[Ru(H₂O)CoW₁₁O₃₉]·22H₂O was synthesized by the stepwise acidification and the stepwise addition of solutions of the component elements as well as the ion exchanging- cooling method. The optimal proportion of the component compound and the pH of the synthesis reaction were given. The product was characterized by means of inductively coupled plasma(ICP), IR, UV and thermal analysis. The IR and UV results indicate that H₇[Ru(H₂O)CoW₁₁O₃₉]·22H₂O possesses the Keggin structure. The results of AC impedance measurement show that its proton conductivity is 2.30×10^-3 S/cm at room temperature(295 K) and a relative humidity of 75%.     

4-(1H-1,2,4-三唑-1-亚甲基)苯甲酸过渡金属配合物的合成、结构、抑菌活性及DNA裂解活性

Three novel transitionmetal compounds [Cu_0.5L]_n (1), {[Ni(L)₂·(H₂O)₂]·(H₂O)₂}_n(2), and {[Co(L)₂·(H₂O)₂]· (H₂O)₂}_n (3), were hydrothermally synthesized with 4-(1H-1,2,4-triazol-1-ylmethyl) benzoic acid (HL) and characterized by infrared spectroscopy, elemental analyses, single-crystal X-ray diffraction, thermal analyses, UV-Vis spectroscopy, and fluorescence spectroscopy. Structural analyses reveal that compound 1 features a one-dimensional (1D) chain, while isomorphic 2 and 3 exhibit a three-dimensional (3D) network structure with interchain hydrogen-bonding. Antifungal activities tests reveal that 1 has the highest antifungal effect on the five fungi (Fusarium graminearum, Vasa mali, Macrophoma kawatsukai, Colletotrichum gloeosporioides, and Alternaria alternate) among the three compounds. Furthermore, DNA cleavage experiments indicate that compound 1 has more efficient DNA (pUC 18) cleavage activity than compounds 2 and 3. The binding properties of the three compounds with DNA were also investigated by absorption. The results show that the three compounds can intercalate into DNA, and the interaction of compound 1 is the strongest.     

Co(Ⅱ)-Zn(Ⅱ)掺杂配位聚合物的 合成及物理性能

采用均苯三甲酸配体、 硝酸锌与硝酸钴反应, 一步合成了钴掺杂的锌配位聚合物Zn_1-xCo_x(BTC)·(OH)(H₂O)₃(NMP)(DMF)(H₂O)_1.5(H₃BTC为1,3,5-均苯三酸, NMP为1-甲基-2-吡咯烷酮, DMF为N,N'-二甲基甲酰胺, x=0~0.8). 该化合物结构经X射线单晶衍射确定, 属于立方晶系, 空间群P2₁3, 晶胞参数a=1.43863(20) nm. 利用元素分析、 能量散色光谱(EDS)、 UV-Vis光谱、 X射线粉末衍射(XRD)、 热重分析(TGA)、 氮气吸附和磁性分析等表征手段对样品的物理性质进行了表征. 氮气吸附实验结果表明, 该配位聚合物具有良好的微孔吸附特性, Langmiur比面积为832 m ²/g, 孔径为0.84 nm; 元素分析结果表明, 钴/锌摩尔比为1∶1时, 在37~300 K温度范围内其磁性表现为反铁磁性, 并满足Curie-Weiss定律.     

Hydrothermal Synthesis,Structure and Properties of a New Phosphomolybdate Based on Novel [Co(H2O)4(HP2Mo5O23)]8- Anions and [H8(H2O)16]8+ Water Cluster Cations

A pure inorganic [P₂Mo₅O₂₃]^6- based cobalt complex [H₈(H₂O)₁₆][Co(H₂O)₄(HP₂Mo₅O₂₃)₂] with a sandglass-like shape was synthesized and characterized by means of single-crystal X-ray diffraction, powder X-ray diffraction(PXRD), infrared spectroscopy(IR), thermogravimetry/differential scanning calorimetry(TG/DSC), ultraviolet-visible spectroscopy(UV-Vis) and cyclic voltammogram(CV). Single-crystal X-ray diffraction analysis reveals that the asymmetric unit of compound 1 consists of a half cobalt ion, one [P₂Mo₅O₂₃]^6- anion, two coordinated water molecules and eight lattice water molecules. It is especially intriguing to note that two [P₂Mo₅O₂₃]^6- clusters are symmetrical about the Co ion, like a sandglass. And a chair-like water cluster with an unprecedented centrosymmetric [H₈(H₂O)₁₆]⁸⁺ can be observed in compound 1. Additionally, the electrochemical and catalytic properties of compound 1 were also investigated.     

CeO2/TiO2 Monolith Catalyst for the Selective Catalytic Reduction of NOx with NH3: Influence of H2O and SO2

The influences of H₂O and SO₂ on CeO₂/TiO₂ monolith catalyst for the selective catalytic reduction(SCR) of NO_x with NH₃ were investigated. In the absence of SO₂, H₂O inhibited the SCR activity, which might be ascribed to the competitive adsorption of H₂O and reactants such as NH₃ and/or NO_x. SO₂ could promote the SCR activity of CeO₂/TiO₂ monolith catalyst in the absence of H₂O, while in the presence of H₂O it speeded the deactivation. During the SCR reaction in SO₂-containing gases, Ce(III) sulfate species formed on the catalyst surface, resulting in the enhancement of Brønsted acidity. This played a significant role in the enhanced SCR activity. However, in the presence of both H₂O and SO₂, a large amount of ammonium-sulfate salts formed on the catalyst surface, which resulted in the blocking of catalyst pores and deactivated the catalyst. In addition, the NO_x conversion was more sensitive to gas hourly space velocity in the presence of H₂O than in the absence of H₂O. The relatively high space velocity would result in a higher formation rate of ammonium-sulfate salts on per unit catalyst in the presence of H₂O and SO₂, which caused obvious deactivation of Ce/TiO₂ monolith catalyst.     

不同晶相TiO2负载Cu2O催化甲醛乙炔化反应

分别以金红石相和锐钛矿相TiO₂为载体, 采用液相还原-沉积法制备了Cu₂O/TiO₂催化剂. 采用氮气物理吸附-脱附(N₂-physisorption)实验、 氢气程序升温还原(H₂-TPR)、 X射线衍射(XRD)、 X射线光电子能谱(XPS)、 CO红外光谱(CO-IR)及高分辨透射电子显微镜(HRTEM)等技术, 研究了不同晶相TiO₂载体对Cu₂O/TiO₂结构及其催化甲醛乙炔化反应性能的影响. 结果表明, 以金红石相TiO₂为载体的催化剂炔化活性明显高于以锐钛矿相TiO₂为载体的催化剂, 原因在于金红石相TiO₂主要暴露(110)晶面, 其与铜物种的配位环境及较高的空位密度形成了更多的Cu—O—Ti结构物种, 表现为Cu₂O与TiO₂之间强的相互作用. 这导致Cu₂O高效转变为乙炔亚铜活性物种, 并保持了较高的分散度与稳定性, 抑制了过度还原物种金属Cu的生成, 进而使催化剂表现出较高的催化性能.