无卤磷系阻燃聚合物研究进展

无卤磷系阻燃聚合物燃烧时低烟无毒,对环境污染少,阻燃剂含量较少就能达到好的阻燃效果,且对聚合物材料的各种性能影响甚微,因而无卤磷系阻燃聚合物得到广泛的应用。文中在参考了大量文献的基础上,对无卤磷系阻燃聚合物的合成、结构、性能及应用做了详细的介绍和论述,并展望了无卤磷系阻燃聚合物的发展方向和前景。     

EVA基无卤阻燃复合材料的研究进展

分别介绍了采用金属氢氧化物阻燃剂、蒙脱石型阻燃剂、磷系阻燃剂、氮系阻燃剂、膨胀型阻燃剂、有机硅阻燃剂、碱式硫酸镁晶须（MOS）阻燃剂和辐射交联技术制备的无卤阻燃乙烯―乙酸乙烯共聚物（EVA）复合材料的研究开发现状,并展望了无卤阻燃EVA复合材料的发展趋势。     

聚乙烯醇无卤阻燃研究进展

鉴于环保的压力,无卤阻燃剂逐渐替代含卤阻燃剂,用在聚乙烯醇(Polyvinyl alcohol,PVA)阻燃处理中。本文综述了近年来无卤阻燃PVA的最新研究进展,总结分析了无机型阻燃剂、磷系阻燃剂、氮系阻燃剂、膨胀型阻燃剂及反应型阻燃剂对PVA的阻燃研究现状,介绍了不同类型阻燃剂的阻燃机理、优缺点以及典型阻燃剂对PVA阻燃性质和力学性质的影响;在此基础上讨论了PVA阻燃的独特性,充分利用PVA的结构特征,研制出适合PVA加工方式的阻燃剂复配配方是PVA阻燃研究的主要发展方向。     

阻燃改性尼龙研究进展

综述了近年来阻燃改性尼龙材料的研究成果,尤其是现今适用于尼龙阻燃的各类阻燃体系的研究现状,包括溴系阻燃剂、磷系阻燃剂、氮系阻燃剂、磷-氮协效膨胀型阻燃剂、无机阻燃剂以及纳米阻燃协效剂等,并展望了未来阻燃尼龙的发展趋势.卤系阻燃剂将逐渐被替代,无卤环境友好型阻燃剂和膨胀型阻燃体系是未来重点的发展方向,综合改性、复配技术的应用也是未来研究和应用的热点.     

膨胀型环状类磷酸酯蜜胺盐阻燃剂的合成及阻燃聚丙烯的结构与性能

以双季戊四醇、三季戊四醇、多聚磷酸、五氧化二磷和三聚氰胺为原料,合成了膨胀型环状类磷酸酯蜜胺盐阻燃剂,并与聚丙烯共混制成阻燃聚丙烯.红外分析表明该阻燃剂具有环状结构.通过扫描电镜和X射线衍射对阻燃聚丙烯进行了结构分析和表面纹理的表征.实验结果表明：该阻燃剂阻燃性能良好,但在聚丙烯中的分散性较差;用甲基纤维素对该阻燃剂进行表面化学修饰以后,该阻燃剂在聚丙烯中的分散性及阻燃材料的机械性能得到了明显的改善.     

核壳结构型阻燃剂研究进展

通过微胶囊化技术可赋予阻燃剂以特殊的核壳结构,从而有效减小阻燃剂吸湿性,增加与基体相容性,明显提高阻燃高分子复合材料力学、耐水、阻燃等性能.本文扼要论述了核壳结构型卤系、氢氧化镁、红磷、无机磷系、有机磷系以及膨胀阻燃体系的研究现状,并阐述了该特殊阻燃剂的研究重点与发展趋势.     

PP/EVA/OMMT纳米复合材料及其阻燃材料的动态燃烧行为

利用锥形量热仪(CONE)在35kW/m2热辐照条件下,并结合极限氧指数(LOI)和UL-94垂直燃烧测试方法对聚丙烯(PP)/乙烯-醋酸乙烯酯共聚物(EVA)/有机蒙脱土(OMMT)纳米复合材料和加入无卤复配阻燃剂制备的PP/EVA/OMMT/氢氧化铝(ATH)/三氧化二锑(AO)纳米复合阻燃材料的热释放速率、烟释放及材料在燃烧时的质量损失行为进行了研究。结果表明,添加5%(质量分数)OMMT可以提高PP/EVA复合材料的阻燃性能,燃烧时的热释放速率、质量损失率以及烟释放量减少,且OMMT与无卤复配阻燃剂之间可产生阻燃协同作用,使纳米复合阻燃材料的阻燃性能、热稳定性和抑烟性进一步增强。     

低烟无卤阻燃聚烯烃的研究进展和应用前景

结合近几年来在低烟无卤阻燃聚烯烃研究的系列工作，综述了该领域国内外研究的最新进展，重点论述了聚合物纳米插层化合物、可膨胀石墨体系、硅胶、碳酸钾体系、氢氧化镁和硼酸锌、有机磷系和磷－氮系膨胀型阻燃剂在无卤阻燃聚烯烃中所取得的主要成果，展望了其应用前景。     

聚氨酯硬泡无卤阻燃研究进展

首先对聚氨酯分解和燃烧规律的研究进展进行综述,根据文献中聚氨酯在不同条件下的分解规律的研究结果,给出聚氨酯硬泡分解和燃烧过程的一般规律。在此基础上,通过文献报道结合本课题组的研究结果,考察了磷系阻燃剂和功能填料对聚氨酯泡沫燃烧性能,主要包括氧指数、燃烧热释放速率等指标的影响,总结出聚氨酯硬泡体系中磷系阻燃剂的作用机理和规律,以及磷系阻燃剂与功能性填料复合应用的阻燃效果,并进一步提出了聚氨酯硬泡无卤阻燃的实现方案。     

含氢氧化镁的阻燃硅烷交联聚乙烯

在硅烷交联聚乙烯体系中 ,添加氢氧化镁阻燃剂制备无卤阻燃的硅烷交联聚乙烯。详细讨论了硅烷和氢氧化镁用量对材料力学性能及阻燃性能的影响。采用了拉伸性能试验、氧指数试验和锥形量热计试验对交联物的性能进行了表征。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.