带有Dzyaloshinski-Mariya相互作用的两比特纠缠量子Otto热机和量子Stirling热机

研究了以带有Dzyaloshinski-Mariya(DM)相互作用的两比特自旋体系为工质的量子纠缠Otto热机和量子Stirling热机.两种不同热机在各自的循环过程中,通过保持其他参量不变,只有DM相互作用发生改变,从而分析热机循环中DM相互作用与热传递、做功以及效率等热力学量之间的关系.研究结果表明:DM相互作用对两种热机的基本量子热力学量都具有重要的影响,但量子Stirling热机由于回热器的使用,其循环效率会大于量子Otto纠缠热机的效率,甚至会超过Carnot效率;得到了量子Otto纠缠热机和量子Stirling热机做正功的条件.因此,在这两个纠缠体系中,热力学第二定律都依然成立.     

Quantum afterburner: improving the efficiency of an ideal heat engine

By using a laser and maser in tandem, it is possible to obtain laser action in the hot exhaust gases of a heat engine. Such a "quantum afterburner" involves the internal quantum states of the working molecules as well as the techniques of cavity quantum electrodynamics and is therefore in the domain of quantum thermodynamics. It is shown that Otto cycle engine performance can be improved beyond that of the "ideal" Otto heat engine. Furthermore, the present work demonstrates a new kind of lasing without initial inversion.     

Quantum Heat Engines with Complex Working Media,Complete Otto Cycles and Heuristics

Quantum thermal machines make use of non-classical thermodynamic resources, one of which include interactions between elements of the quantum working medium. In this paper, we examine the performance of a quasi-static quantum Otto engine based on two spins of arbitrary magnitudes subject to an external magnetic field and coupled via an isotropic Heisenberg exchange interaction. It has been shown earlier that the said interaction provides an enhancement of cycle efficiency, with an upper bound that is tighter than the Carnot efficiency. However, the necessary conditions governing engine performance and the relevant upper bound for efficiency are unknown for the general case of arbitrary spin magnitudes. By analyzing extreme case scenarios, we formulate heuristics to infer the necessary conditions for an engine with uncoupled as well as coupled spin model. These conditions lead us to a connection between performance of quantum heat engines and the notion of majorization. Furthermore, the study of complete Otto cycles inherent in the average cycle also yields interesting insights into the average performance.     

Finite time thermodynamic analysis of quantum Otto heat engine with squeezed thermal bath

We investigate the finite time performance of reciprocating quantum Otto heat engine coupled to squeezed hot reservoir. We emphasize the converged limit cycle where each stroke is performed in finite time. To fully exploit the quantum availability provided by the squeezed bath, an optimal frequency protocol in the work extraction stroke is explicitly proposed. The power output is optimized with respect to the hot and cold isochore times. Thermodynamic analysis shows that for a wide range of squeezing parameters, efficiency at maximum power exceeds the generalized Curzon–Ahlborn efficiency defined by the effective temperature of the squeezed bath.     

The Second Law of Thermodynamics in a Quantum Heat Engine Model

The second law of thermodynamics has been proven by many facts in classical world. Is there any new property of it in quantum world? In this paper, we calculate the change of entropy in T.D. Kieu's model for quantum heat engine (QHE) and prove the broad validity of the second law of thermodynamics. It is shown that the entropy of the quantum heat engine neither decreases in a whole cycle, nor decreases in either stage of the cycle. The second law of thermodynamics still holds in this QHE model. Moreover, although the modified quantum heat engine is capable of extracting more work, its efficiency does not improve at all. It is neither beyond the efficiency of T.D. Kieu's initial model, nor greater than the reversible Carnot efficiency.     

Thermal entangled quantum heat engine

Based on a two-qubit Heisenberg XY model, we construct a four-level entangled quantum heat engine (QHE). It is an interesting quantum Otto cycle where the exchange constant is fixed and only the magnetic field is varied during the adiabatic steps. The expressions for several thermodynamic quantities such as the heat transferred, the work and the efficiency are derived. Moreover, the influence of the entanglement on the thermodynamic quantities is investigated numerically. Several interesting features of the variation of the heat transferred, the work and the efficiency with the concurrences of the thermal entanglement of different thermal equilibrium states are obtained. Finally, we discussed the maximum efficiency of the QHE.     

Efficiency bounds for nonequilibrium heat engines

We analyze the efficiency of thermal engines (either quantum or classical) working with a single heat reservoir like an atmosphere. The engine first gets an energy intake, which can be done in an arbitrary nonequilibrium way e.g. combustion of fuel. Then the engine performs the work and returns to the initial state. We distinguish two general classes of engines where the working body first equilibrates within itself and then performs the work (ergodic engine) or when it performs the work before equilibrating (non-ergodic engine). We show that in both cases the second law of thermodynamics limits their efficiency. For ergodic engines we find a rigorous upper bound for the efficiency, which is strictly smaller than the equivalent Carnot efficiency. I.e. the Carnot efficiency can be never achieved in single reservoir heat engines. For non-ergodic engines the efficiency can be higher and can exceed the equilibrium Carnot bound. By extending the fundamental thermodynamic relation to nonequilibrium processes, we find a rigorous thermodynamic bound for the efficiency of both ergodic and non-ergodic engines and show that it is given by the relative entropy of the nonequilibrium and initial equilibrium distributions. These results suggest a new general strategy for designing more efficient engines. We illustrate our ideas by using simple examples.     

Quantum point contacts as heat engines

The efficiency of macroscopic heat engines is restricted by the second law of thermodynamics. They can reach at most the efficiency of a Carnot engine. In contrast, heat currents in mesoscopic heat engines show fluctuations. Thus, there is a small probability that a mesoscopic heat engine exceeds Carnot's maximum value during a short measurement time. We illustrate this effect using a quantum point contact as a heat engine. When a temperature difference is applied to a quantum point contact, the system may be utilized as a source of electrical power under steady state conditions. We first discuss the optimal working point of such a heat engine that maximizes the generated electrical power and subsequently calculate the statistics for deviations of the efficiency from its most likely value. We find that deviations surpassing the Carnot limit are possible, but unlikely.     

Reprint of : Quantum point contacts as heat engines

The efficiency of macroscopic heat engines is restricted by the second law of thermodynamics. They can reach at most the efficiency of a Carnot engine. In contrast, heat currents in mesoscopic heat engines show fluctuations. Thus, there is a small probability that a mesoscopic heat engine exceeds Carnot's maximum value during a short measurement time. We illustrate this effect using a quantum point contact as a heat engine. When a temperature difference is applied to a quantum point contact, the system may be utilized as a source of electrical power under steady state conditions. We first discuss the optimal working point of such a heat engine that maximizes the generated electrical power and subsequently calculate the statistics for deviations of the efficiency from its most likely value. We find that deviations surpassing the Carnot limit are possible, but unlikely.     

Modeling and Performance Optimization of an Irreversible Two-Stage Combined Thermal Brownian Heat Engine

Based on finite time thermodynamics, an irreversible combined thermal Brownian heat engine model is established in this paper. The model consists of two thermal Brownian heat engines which are operating in tandem with thermal contact with three heat reservoirs. The rates of heat transfer are finite between the heat engine and the reservoir. Considering the heat leakage and the losses caused by kinetic energy change of particles, the formulas of steady current, power output and efficiency are derived. The power output and efficiency of combined heat engine are smaller than that of single heat engine operating between reservoirs with same temperatures. When the potential filed is free from external load, the effects of asymmetry of the potential, barrier height and heat leakage on the performance of the combined heat engine are analyzed. When the potential field is free from external load, the effects of basic design parameters on the performance of the combined heat engine are analyzed. The optimal power and efficiency are obtained by optimizing the barrier heights of two heat engines. The optimal working regions are obtained. There is optimal temperature ratio which maximize the overall power output or efficiency. When the potential filed is subjected to external load, effect of external load is analyzed. The steady current decreases versus external load; the power output and efficiency are monotonically increasing versus external load.     

Quantum heat engine cycle working with a strongly correlated electron system

A new model of a quantum heat engine(QHE) cycle is established,in which the working substance consists of an interacting electrons system.One of our purposes is to test the validity of the second law of thermodynamics by this model,which is more general than the spin-1/2 antiferromagnetic Heisenberg model since it would recover the spin model when the on-site Coulomb interaction U is strong enough.On the basis of quantum mechanics and the first law of thermodynamics,we show no violation of the second law of thermodynamics during the cycle.We further study the performance characteristics of the cycle by investigating in detail the optimal relations of efficiency and dimensionless power output.We find that the efficiency of our engine can be expressed as η = 1 - t22/t12 in the large-U limit,which is valid even for a four sites QHE.     

Thermodynamic performance characteristics of a three-terminal quantum dot hybrid thermoelectric heat engine

We propose a new model of the three-terminal quantum dot hybrid thermoelectric heat engine in which the electrons transfer between two electronic terminals at different temperatures and chemical potentials through two coupled single-level quantum dots. Based on master equation we derive the expressions for the output power and the efficiency. The working region of the hybrid heat engine is determined according to the first and second law of thermodynamics. The performance characteristic curves are plotted and the optimal performance parameters are obtained. Finally, the influence of the non-radiative effect on the optimal performance parameters is discussed in detail.     

The Quantum Otto Heat Engine with a Relativistically Moving Thermal Bath

International Journal of Theoretical Physics - We investigate the quantum thermodynamic cycle of a quantum heat engine carrying out an Otto thermodynamic cycle. We use the thermal properties of a...     

Can Quantum Correlations Lead to Violation of the Second Law of Thermodynamics?

Quantum entanglement can cause the efficiency of a heat engine to be greater than the efficiency of the Carnot cycle. However, this does not mean a violation of the second law of thermodynamics, since there is no local equilibrium for pure quantum states, and, in the absence of local equilibrium, thermodynamics cannot be formulated correctly. Von Neumann entropy is not a thermodynamic quantity, although it can characterize the ordering of a system. In the case of the entanglement of the particles of the system with the environment, the concept of an isolated system should be refined. In any case, quantum correlations cannot lead to a violation of the second law of thermodynamics in any of its formulations. This article is devoted to a technical discussion of the expected results on the role of quantum entanglement in thermodynamics.     

能造出功率和效率都高的热机吗?——有限时间热力学的发展与展望

在热力学中,功率和效率是衡量热机性能的两个主要参数。根据经典热力学,可逆热机效率的上限是卡诺效率,但相应的功率为零。这是因为卡诺效率的实现依赖于时间无穷长的准静态假设。因此,如何根据实际需求,在保证热机功率前提下提高热机效率成为热力学一个重要的科学挑战问题。在20世纪上半叶应运而生的有限时间热力学,今天得到了蓬勃发展,为应对这个挑战提供了必要的科学支撑。文章主要介绍有限时间热力学的发展及现状,特别是最近对于有限时间热机功率效率约束关系及其优化问题上的研究。针对有限时间热力学循环功率—效率约束与不可逆性的关系,文章还简介最近作者关于有限时间等温过程中不可逆熵产生的理论和实验研究工作。最后展望未来有限时间热力学及有限系统非平衡物理的可能发展与应用。     

Performance characteristics of an irreversible thermally driven Brownian microscopic heat engine

Brownian particles moving in a spatially asymmetric but periodic potential (ratchet), with an external load force and connected to an alternating hot and cold reservoir, are modeled as a microscopic heat engine, referred to as the Brownian heat engine. The heat flow via both the potential energy and the kinetic energy of the particles are considered simultaneously. The forward and backward particle currents are determined using an Arrhenius' factor. Expressions for the power output and efficiency are derived analytically. The maximum power output and efficiency are calculated. It is expounded that the Brownian heat engine is always irreversible and its efficiency cannot approach the efficiency η_C of the Carnot heat engine even in quasistatic limit. The influence of the main parameters such as the load, the barrier height of the potential, the asymmetry of the potential and the temperature ratio of the heat reservoirs on the performance of the Brownian heat engine is discussed in detail. It is found that the Brownian heat engines may be controlled to operate in different regions through variation of some parameters.     

温库边界对布朗热机性能的影响

研究了单势垒锯齿势中,布朗粒子在外力和空间周期温度场作用下构成的布朗热机的热力学性能.考虑布朗粒子动能变化以及高、低温库之间热漏引起的热流.用Smoluchowski方程描述粒子在黏性介质中的动力学特性,推导出高、低温库的热流以及热机功率和效率的解析表达式.通过数值计算分析势垒高度、外力和温库边界对热机性能的影响.研究表明:由于动能变化和热漏引起的不可逆热流的存在,布朗热机为不可逆热机,热机的功率效率特性为一闭合的关系曲线;势垒边界与温库边界重合时,热机的功率达到最大值;通过改变温库边界的位置,可以在一定范围内提高热机的效率,但同时减小了热机的输出功率.     

Ecological optimization of an irreversible harmonic oscillators Carnot heat engine

A model of an irreversible quantum Carnot heat engine with heat resistance, internal irreversibility and heat leakage and many non-interacting harmonic oscillators is established in this paper. Based on the quantum master equation and semi-group approach, equations of some important performance parameters, such as power output, efficiency, exergy loss rate and ecological function for the irreversible quantum Carnot heat engine are derived. The optimal ecological performance of the heat engine in the classical limit is analyzed with numerical examples. Effects of internal irreversibility and heat leakage on the ecological performance are discussed. A performance comparison of the quantum heat engine under maximum ecological function and maximum power conditions is also performed.     

The second law, Maxwell's demon, and work derivable from quantum heat engines

With a class of quantum heat engines which consists of two-energy-eigenstate systems undergoing, respectively, quantum adiabatic processes and energy exchanges with heat baths at different stages of a cycle, we are able to clarify some important aspects of the second law of thermodynamics. The quantum heat engines also offer a practical way, as an alternative to Szilard's engine, to physically realize Maxwell's demon. While respecting the second law on the average, they are also capable of extracting more work from the heat baths than is otherwise possible in thermal equilibrium.     

Optimal configuration for a finite high-temperature source heat engine cycle with the complex heat transfer law

The optimal configuration of a heat engine operating between a finite high-temperature source and an infinite low-temperature reservoir is derived by using finite time thermodynamics based on a complex heat transfer law, including Newtonian heat transfer law, linear phenomenological heat transfer law, radiative heat transfer law, Dulong-Petit heat transfer law, generalized convective heat transfer law and generalized radiative heat transfer law, q ∝ (ΔT ⁿ ). In the engine model the only irreversibility of finite rate heat transfer is considered. The optimal relation between the power output and efficiency of the heat engine is also derived by using an equivalent temperature of the hot reservoir. The obtained results include those obtained in recent literature and can provide some theoretical guidance for the designs of practical engines. Supported by the Program for New Century Excellent Talents in University of China (Grant No. 20041006) and the Foundation for the Author of National Excellent Doctoral Dissertation of China (Grant No. 200136)