带有Dzyaloshinski-Mariya相互作用的两比特XXZ模型的纠缠量子热机

以带有Dzyaloshinski-Mariya 相互作用的两比特XXZ模型为工作物质构建纠缠量子热机. 在量子热力学平衡态下, 采用Kieu的形式描述了做功与热传递.对于不同的各向异性参数, 分析了热机循环中量子纠缠与热传递、做功以及机械效率等热力学量之间的关系. 结果表明: 在这个纠缠体系中, 热力学第二定律依然成立; 机械效率的等值线图是环状曲线; 当各向异性参数Δ较小时, 热机在C₁ > C₂ 和C₁ < C₂ 两区域运行, 当增大Δ值时, 热机只在C₁ > C₂ 区域运行. 关键词： 量子热机 并发度 机械效率     

具有Dzyaloshinskii-Moriya相互作用的四量子比特海森堡XXZ模型中的热纠缠

研究四量子比特海森堡XXZ模型中配对纠缠的性质,在该系统中引入了Dzyaloshinskii-Moriya (DM)相互作用,通过求解配对纠缠度来讨论最近邻和次近邻两量子比特之间的热纠缠性质. 研究结果表明:对于铁磁和反铁磁两种情形而言,次近邻两量子比特之间不存在配对热纠缠;但在最近邻两量子比特情况时,DM相互作用和各向异性参数Δ对配对热纠缠和临界温度T_c都具有重要的影响,且随着温度T的增加,配对纠缠度逐渐减小直至消失. 因此,选择和调整合适的DM相互作用和各向异性参数,可以有效地控制和提高配对热纠缠. 关键词： 配对纠缠 XXZ模型')" href="#">XXZ模型 Dzyaloshinskii-Moriya相互作用     

具有Dzyaloshinskii-Moriya相互作用的三量子比特海森伯模型中的对纠缠

研究了一维三量子比特海森伯模型中的对纠缠的提高和控制问题,在该系统中引入了Dzyaloshinskii-Moriya（DM)相互作用,通过求解共生来计算两量子比特之间的热纠缠,结果表明：对于XXX模型,引入DM相互作用D,可以诱导铁磁和反铁磁自旋链产生热纠缠,尽管它们产生热纠缠所需的D值大小不同.对于XXZ模型,引入DM相互作用后,可以使原本不存在热纠缠的反铁磁自旋链产生纠缠,而且对于铁磁和反铁磁这两种XXZ自旋链,DM相互作用和各向异 关键词： 纠缠 XXX模型')" href="#">XXX模型 XXZ模型')" href="#">XXZ模型 Dzyaloshinskii-Moriya相互作用     

海森堡XYZ自旋链系统的热纠缠与局域量子不确定性研究

研究了热平衡温度，自旋交换相互作用，Dzyaloshinskii-Moriya(DM)相互作用及外加非一致性磁场对两比特海森堡XYZ自旋链量子系统的热纠缠与局域量子不确定度的影响，对比分析了并发度量子纠缠与局域量子不确定度描述自旋链系统量子关联的差别.结果表明自旋链系统的量子纠缠在热平衡温度，DM相互作用及外加磁场的非一致性参数的变化情况下均会出现纠缠突然死亡的再生现象，而自旋链系统的局域量子不确定度随着这些参数呈连续变化现象.并且，自旋交换相互作用，DM相互作用及外加横向磁场作用强度较小时，他们的变化对自旋链系统的量子纠缠与局域量子不确定度的影响有着明显的差别.     

Dzyaloshinskii-Moriya相互作用和內禀退相干对三粒子XXZ海森堡系统的量子纠缠的影响

根据Milburn理论,研究了考虑内禀退相干情况下,三粒子XXZ海森堡系统在DzyaloshinskiiMoriya(DM)相互作用和各向异性参数的影响下的量子纠缠演化特性.分析了不同DM相互作用和內禀退相干因子等参数对量子对纠缠度的影响.研究表明:系统的对纠缠度与各向异性参数Δ无关,但DM相互作用和內禀退相干都对系统的对纠缠都有明显的影响.当无DM相互作用只存在內禀退相干时,系统的三对对纠缠度各不相同;引入DM相互作用后,系统的对纠缠度的稳定值将改变;选择合适的DM相互作用参数时,系统的对纠缠度随时间做震荡,随着时间的延长,震荡减弱至一个非零的稳定值;并且系统的对纠缠随內禀退相干增大,震荡幅度变小,震荡时间变短.因此,在內禀退相干存在时,合适的DM相互作用参数可以有效的控制对纠缠.     

两量子比特非线性相互作用模型中的量子关联

运用量子态变换的方法论证了两个qubit纯态中量子关联与纠缠的等价性.并利用三种带有横场的非线性相互作用模型研究了两个qubit体系中的量子关联.发现合适的横场对于最大量子关联态的获得、平均量子关联的提高都有着积极的作用.两个qubit体系获得最大量子关联时,不同模型,不同的横场,对应的量子态却各不相同.     

量子相变与量子纠缠

作为量子体系一种内在的非局域性关联,量子纠缠已经成为一个可利用的重要资源并广泛应用于许多领域.强关联体系中的量子相变,作为凝聚态理论中的一个重要现象,也一直是人们研究的热点.本文介绍了量子纠缠的定义,纠缠的判据,以及纠缠的度量.接着,通过一个具体模型对如何利用量子纠缠描述量子相变进行讨论和分析.研究发现,在强关联体系量子相变中量子纠缠扮演着非常重要的角色.     

具有Dzyaloshinskii-Moriya相互作用的XY模型的量子相干性

研究了具有Dzyaloshinskii-Moriya(DM)相互作用的一维横场XY自旋链的量子相变和量子相干性.采用约旦-维格纳变换严格求解了哈密顿量,并描绘了体系的关联函数和相图,相图包含反铁磁相、顺磁相和螺旋相.利用相对熵和Jensen-Shannon熵讨论了XY模型的量子相干性.研究发现,相对熵与Jensen-Shannon熵所表现的行为都可以很好地表征该模型的量子相变.非螺旋相中量子相干性不依赖DM相互作用,而在螺旋相DM相互作用对量子相干性有显著影响.此外,指出了在带有DM相互作用的这一类反射对称破缺体系中关联函数计算的常见问题.     

多模简并多光子Tavis-Cummings模型中的量子纠缠特性

利用冯·纽曼约化熵理论研究了多模相干态光场与两等同二能级原子简并多光子相互作用系统量子纠缠演化特性,得到了多模光场量子纠缠的解析表达式,并给出了双模光场与两原子相互作用时量子纠缠的数值计算结果.结果表明:量子纠缠随着光子简并度的增大而增强;随着初始平均光子数的增加,量子纠缠演化的周期性变得越来越明显;当场与原子远离共振时,量子纠缠随着频率失谐量的增大而减弱;当失谐量足够大时,场与原子几乎总是处于纠缠状态.这些结论对于纠缠态或纯态的制备及获取光学系统中的量子信息研究中有一定参考价值.     

自旋梯中的量子失协

对存在循环相互作用的自旋梯耦合的两粒子的量子失协进行了讨论.对于双边耦合的情况,两耦合粒子的量子失协都是时间的周期函数,但是与时间间隔无关.通过讨论我们发现量子失协比量子纠缠更有利于量子信息的处理和量子计算.     

Quantum Heat Engines with Complex Working Media,Complete Otto Cycles and Heuristics

Quantum thermal machines make use of non-classical thermodynamic resources, one of which include interactions between elements of the quantum working medium. In this paper, we examine the performance of a quasi-static quantum Otto engine based on two spins of arbitrary magnitudes subject to an external magnetic field and coupled via an isotropic Heisenberg exchange interaction. It has been shown earlier that the said interaction provides an enhancement of cycle efficiency, with an upper bound that is tighter than the Carnot efficiency. However, the necessary conditions governing engine performance and the relevant upper bound for efficiency are unknown for the general case of arbitrary spin magnitudes. By analyzing extreme case scenarios, we formulate heuristics to infer the necessary conditions for an engine with uncoupled as well as coupled spin model. These conditions lead us to a connection between performance of quantum heat engines and the notion of majorization. Furthermore, the study of complete Otto cycles inherent in the average cycle also yields interesting insights into the average performance.     

Entangled quantum heat engines based on two two-spin systems with Dzyaloshinski-Moriya anisotropic antisymmetric interaction

We construct an entangled quantum heat engine (EQHE) based on two two-spin systems with Dzyaloshinski-Moriya (DM) anisotropic antisymmetric interaction. By applying the explanations of heat transferred and work performed at the quantum level in Kieu’s work [Phys. Rev. Lett. 93, 140403 (2004)], the basic thermodynamic quantities, i.e., heat transferred, net work done in a cycle and efficiency of EQHE are investigated in terms of DM interaction and concurrence. The validity of the second law of thermodynamics is confirmed in the entangled system. It is found that there is a same efficiency for both antiferromagnetic and ferromagnetic cases, and the efficiency can be controlled in two manners: (1) only by spin-spin interaction J and DM interaction D; (2) only by the temperature T and concurrence C. In order to obtain a positive net work, we need not entangle all qubits in two two-spin systems and we only require the entanglement between qubits in a two-spin system not be zero. As the ratio of entanglement between qubits in two two-spin systems increases, the efficiency will approach infinitely the classical Carnot one. An interesting phenomenon is an abrupt transition of the efficiency when the entanglements between qubits in two two-spin systems are equal.     

Thermal entangled quantum heat engine

Based on a two-qubit Heisenberg XY model, we construct a four-level entangled quantum heat engine (QHE). It is an interesting quantum Otto cycle where the exchange constant is fixed and only the magnetic field is varied during the adiabatic steps. The expressions for several thermodynamic quantities such as the heat transferred, the work and the efficiency are derived. Moreover, the influence of the entanglement on the thermodynamic quantities is investigated numerically. Several interesting features of the variation of the heat transferred, the work and the efficiency with the concurrences of the thermal entanglement of different thermal equilibrium states are obtained. Finally, we discussed the maximum efficiency of the QHE.     

Efficiency bounds for nonequilibrium heat engines

We analyze the efficiency of thermal engines (either quantum or classical) working with a single heat reservoir like an atmosphere. The engine first gets an energy intake, which can be done in an arbitrary nonequilibrium way e.g. combustion of fuel. Then the engine performs the work and returns to the initial state. We distinguish two general classes of engines where the working body first equilibrates within itself and then performs the work (ergodic engine) or when it performs the work before equilibrating (non-ergodic engine). We show that in both cases the second law of thermodynamics limits their efficiency. For ergodic engines we find a rigorous upper bound for the efficiency, which is strictly smaller than the equivalent Carnot efficiency. I.e. the Carnot efficiency can be never achieved in single reservoir heat engines. For non-ergodic engines the efficiency can be higher and can exceed the equilibrium Carnot bound. By extending the fundamental thermodynamic relation to nonequilibrium processes, we find a rigorous thermodynamic bound for the efficiency of both ergodic and non-ergodic engines and show that it is given by the relative entropy of the nonequilibrium and initial equilibrium distributions. These results suggest a new general strategy for designing more efficient engines. We illustrate our ideas by using simple examples.     

Influence of quantum degeneracy on the performance of a gas Stirling engine cycle

Based on the state equation of an ideal quantum gas, the regenerative loss of a Stirling engine cycle working with an ideal quantum gas is calculated. Thermal efficiency of the cycle is derived. Furthermore, under the condition of quantum degeneracy, several special thermal efficiencies are discussed. Ratios of thermal efficiencies versus the temperature ratio and volume ratio of the cycle are made. It is found that the thermal efficiency of the cycle not only depends on high and low temperatures but also on maximum and minimum volumes. In a classical gas state the thermal efficiency of the cycle is equal to that of the Carnot cycle. In an ideal quantum gas state the thermal efficiency of the cycle is smaller than that of the Carnot cycle. This will be significant for deeper understanding of the gas Stirling engine cycle.     

以广义Redlich-Kwong气体为工质的不可逆回热式斯特林热机循环输出功率和效率

研究了热阻、回热损失和热漏等多种不可逆因素对以广义Redlich-Kwong气体为工质的斯特林热机性能的影响,给出了斯特林热机输出功率和效率的具体表达式并分析非理想回热特性及循环主要性能参数(如循环体积比及工质高低温比等)对循环输出功率和效率的影响.同时指出,只有在理想回热及无热漏的情况下,气体斯特林热机的效率才能达到卡诺效率.     

Entangled quantum heat engine based on two-qubit Heisenberg XY model

Based on a two-qubit isotropic Heisenberg XY model under a constant external magnetic field,we construct a four-level entangled quantum heat engine(QHE).The expressions for the heat transferred,the work,and the efficiency are derived.Moreover,the influence of the entanglement on the thermodynamic quantities is investigated analytically and numerically.Several interesting features of the variations of the heat transferred,the work,and the efficiency with the concurrences of the thermal entanglement of two different thermal equilibrium states in zero and nonzero magnetic fields are obtained.     

Quantum point contacts as heat engines

The efficiency of macroscopic heat engines is restricted by the second law of thermodynamics. They can reach at most the efficiency of a Carnot engine. In contrast, heat currents in mesoscopic heat engines show fluctuations. Thus, there is a small probability that a mesoscopic heat engine exceeds Carnot's maximum value during a short measurement time. We illustrate this effect using a quantum point contact as a heat engine. When a temperature difference is applied to a quantum point contact, the system may be utilized as a source of electrical power under steady state conditions. We first discuss the optimal working point of such a heat engine that maximizes the generated electrical power and subsequently calculate the statistics for deviations of the efficiency from its most likely value. We find that deviations surpassing the Carnot limit are possible, but unlikely.     

Reprint of : Quantum point contacts as heat engines

The efficiency of macroscopic heat engines is restricted by the second law of thermodynamics. They can reach at most the efficiency of a Carnot engine. In contrast, heat currents in mesoscopic heat engines show fluctuations. Thus, there is a small probability that a mesoscopic heat engine exceeds Carnot's maximum value during a short measurement time. We illustrate this effect using a quantum point contact as a heat engine. When a temperature difference is applied to a quantum point contact, the system may be utilized as a source of electrical power under steady state conditions. We first discuss the optimal working point of such a heat engine that maximizes the generated electrical power and subsequently calculate the statistics for deviations of the efficiency from its most likely value. We find that deviations surpassing the Carnot limit are possible, but unlikely.     

Spin current and its heat effect in a multichannel quantum wire with Rashba spin-orbit coupling

Using the perturbation method,we theoretically study the spin current and its heat effect in a multichannel quantum wire with Rashba spin-orbit coupling.The heat generated by the spin current is calculated.With the increase of the width of the quantum wire,the spin current and the heat generated both exhibit period oscillations with equal amplitudes.When the quantum-channel number is doubled,the oscillation periods of the spin current and of the heat generated both decrease by a factor of 2.For the spin current j s,xy,the amplitude increases with the decrease of the quantum channel;while the amplitude of the spin current j s,yx remains the same.Therefore we conclude that the effect of the quantum-channel number on the spin current j s,xy is greater than that on the spin current j s,yx.The strength of the Rashba spin-orbit coupling is tunable by the gate voltage,and the gate voltage can be varied experimentally,which implies a new method of detecting the spin current.In addition,we can control the amplitude and the oscillation period of the spin current by controlling the number of the quantum channels.All these characteristics of the spin current will be very important for detecting and controlling the spin current,and especially for designing new spintronic devices in the future.