纳米零价铁去除水体中砷的效能与机理

全球超过一亿人受到高毒性、难处理的砷污染引发的饮用水安全的威胁,解决砷污染问题迫在眉睫而又任重道远。纳米零价铁(nZVI)能高效去除重(类)金属、硝酸盐、磷酸盐、高氯酸盐、卤代物、多环芳烃、偶氮染料和苯酚等污染物,成为广泛应用的工程纳米材料之一,在全球已有近60例的环境原位修复和废水处理工程案例。其独特的纳米级核壳结构和表面性质使其能够通过吸附、还原和沉淀等多种作用高效去砷。本文综述了近年来nZVI及其改性材料去除水中砷的研究进展,探讨了nZVI去除水中As(Ⅲ)和As(Ⅴ)的反应机理,归纳了不同反应条件(初始pH值、反应时间、nZVI投加量、砷初始浓度、共存离子和有机质)对去除效果的影响,总结了nZVI改性材料(多孔材料负载改性nZVI、金属掺杂改性nZVI、表面稳定剂改性nZVI和绿色合成nZVI)对砷的去除效率,展望了纳米零价铁去除砷的发展方向和所面临的挑战。     

金属有机框架材料UTSA-74高效去除水溶液中的砷

利用水热法合成金属有机框架材料UTSA-74,并用它同时去除水中的As(Ⅴ)和As(Ⅲ)。 批次实验结果表明,在低质量浓度情况下(~1 mg/L),UTSA-74对As(Ⅴ)的去除率高达95%。 对As(Ⅲ)的去除率达85%。 经拟合,本实验符合拟二级动力学及Freundlich等温吸附模型。 本文还探究了共存离子(如Cl^-、NO₃^-、PO₄^3-)干扰影响,结果表明PO₄^3-的存在会抑制吸附的进行,可能是由于竞争吸附位点所致。 此外,本文对吸附后的材料进行洗脱(0.1 mol/L NaOH),将洗脱后的UTSA-74材料再次进行吸附探究,反复3次,其去除率仍可达70%左右。 为探究其中机理,本文通过X射线衍射(XRD)、扫描电子显微镜(SEM)、红外光谱(IR)对吸附前后材料进行表征,结果表明吸附过程中可能形成了Zn—O—As,以此促进吸附反应的进行。 综上所述,UTSA-74可以作为一种处理砷的新型吸附剂,具有一定的实用价值。     

低相对分子质量有机酸对α-FeO(OH)吸附As(Ⅲ)的影响

制备并表征了α-FeO(OH),探究了4种低相对分子质量有机酸(LMW)对α-FeO(OH)吸附As(Ⅲ)的影响,并阐明了机理。 单一和混合LMW对α-FeO(OH)吸附As(Ⅲ)均有抑制作用,4种LMW的影响大小顺序为:草酸(OA)>柠檬酸(CA)>乳酸(LA)、水杨酸(SA)。 混合LMW的影响为:OA会加剧CA对α-FeO(OH)吸附As(Ⅲ)的影响,而SA几乎不起作用。 当ρ(As(Ⅲ))较低,LMW通过与α-FeO(OH)的静电引力、与α-FeO(OH)表面的铁离子形成配合物、生成沉淀从而影响α-FeO(OH)对As(Ⅲ)的吸附;当ρ(As(Ⅲ))较高,LMW还通过阻碍As(Ⅲ)在α-FeO(OH)上的扩散和沉淀作用产生影响。 实验结果为土壤中As(Ⅲ)的迁移转化、污染治理提供技术支撑。     

双二苷酰胺从硝酸溶液中萃取Eu(Ⅲ)和Am(Ⅲ)

采用混合酸酐法合成了两种双二苷酰胺(bisdiglycolamide, BisDGA)萃取剂: N,N,N'',N''-四正辛基-N',N″-乙二基-双二苷酰胺(TOE-BisDGA)和N,N,N'',N''-四正辛基-N',N″-间苯二甲基-双二苷酰胺(TOX-BisDGA). 以磺化煤油和正辛醇混合溶液(体积比 90∶10)作稀释剂, 研究了它们在硝酸溶液中对Eu(Ⅲ)和Am(Ⅲ), 以及自身对HNO₃的萃取行为. 结果表明, 2种BisDGAs对HNO₃均有一定萃取, 当酸度不超过1.0 mol/L时, 二者形成1∶1型的萃合物. 随HNO₃浓度增加, Eu(Ⅲ)和Am(Ⅲ)的萃取分配比增加. 相同条件下, TOE-BisDGA对Eu(Ⅲ)和Am(Ⅲ)的萃取能力强于TOX-BisDGA. 斜率分析表明TOE-BisDGA和TOX-BisDGA与Eu(Ⅲ)和Am(Ⅲ)均形成2∶1型的萃合物. 温度升高, 萃取分配比下降, 萃取反应是放热反应. 2种BisDGAs对Eu(Ⅲ)的亲和力强于对Am(Ⅲ)的亲合力, 表明BisDGAs对Eu(Ⅲ)有一定的选择性. 同时, 研究了BisDGAs萃取Eu(Ⅲ)和Am(Ⅲ)的机理, 给出了表观萃取平衡常数和萃取反应热力学函数ΔH, ΔS和ΔG的值. 此外, 还对TOE-BisDGA和TOX-BisDGA与Eu(Ⅲ)形成的配合物进行了红外和紫外光谱分析.     

铁基复合材料的制备及其对水中锑的去除

水体中重金属污染物锑因为具有较高的积累毒性和致癌性而受到研究者的广泛关注。近年来由于世界范围内的锑污染问题日益严峻,因此急需发展经济高效的锑污染处理技术。纳米Fe~0、Fe_3O_4以及FeMnO_x等铁基复合材料凭借其吸附能力强,易分离回收以及安全环保等特点而成为国内外锑污染去除领域的研究热点。本文总结了零价铁和铁氧化物复合材料以及铁基双金属氧化物的制备、改性方法及其对水中污染物锑的去除,重点分析了不同铁基复合材料对Sb(Ⅲ)和Sb(Ⅴ)的吸附机理,总结了温度、p H、共存离子等外界环境对铁基复合材料吸附性能的影响机制,优选了最佳的吸附条件。最后介绍了现有锑污染去除研究中存在的主要问题,展望了铁基复合材料处理水中锑污染物的重点发展方向。     

LiCl-KCl熔盐体系中镨(Ⅲ)在镍电极上的电化学行为

采用循环伏安、 方波伏安、 计时电位和开路计时电位等电化学方法研究了Pr(Ⅲ)离子在共晶LiCl-KCl熔盐中Ni电极上的电化学行为及Pr-Ni合金化机理. 结果表明, Pr(Ⅲ)离子的电化学还原过程为三电子转移的一步反应. 与惰性Mo电极上的循环伏安曲线相比, Pr(Ⅲ) 离子在活性Ni电极的循环伏安曲线上还出现了4对氧化还原峰, 表明Pr(Ⅲ)离子在Ni电极上发生欠电位沉积, 是由于生成不同的Pr-Ni金属间化合物. 采用X射线衍射仪和扫描电子显微镜-能谱仪等对恒电位电解的产物进行了表征. 结果表明, 在不同电位下进行恒电位电解时, 每个电位上只得到一种Pr-Ni金属间化合物, 分别为PrNi₂, PrNi₃, Pr₂Ni₇和PrNi₅.     

白果壳遗态结构Fe_2O_3/Fe_3O_4/C复合材料对水中As(Ⅴ)的吸附性能研究

以白果壳为结构模板,通过铁改性制备获取一种白果壳遗态结构Fe_2O_3/Fe_3O_4/C复合材料(Fe/C-G)为吸附剂,系统探讨了Fe/C-G对水中As(Ⅴ)的吸附特征和机制。结果表明,改性后的Fe/C-G吸附剂活性官能团和吸附位点显著增加;pH值为3时,Fe/C-G吸附剂对As(Ⅴ)的吸附效果最佳;投加量为0.2g时,在保证去除率的同时也使吸附剂用量最优化;较高的初始浓度不利于Fe/C-G吸附As(Ⅴ)。Fe/C-G吸附As(Ⅴ)的过程存在多个控速的步骤;吸附过程以化学吸附为主,物理吸附为辅,升高温度对吸附有益,吸附过程是自发、熵增的吸热反应过程,反应热值为15.653kJ/mol;XPS对吸附前后材料表征分析结果可知,Fe/C-G对As(Ⅴ)的吸附过程中还原作用占主导地位。     

载铁-锆复合树脂对水中锑的吸附效能研究

为探讨新型金属氧化物负载型树脂对水中Sb(V)的吸附效能,以D201树脂为载体,制备得到一种铁-锆水合金属氧化物负载型树脂吸附剂,通过静态、动态吸附试验,考察了该吸附剂对水中Sb(V)的吸附效能。研究结果表明,通过化学负载处理,在D201树脂载体上负载有均匀、致密的铁-锆水合金属氧化物吸附层。载铁-锆复合树脂对Sb(V)的最大饱和吸附容量为73.75mg/g。在反应时间为90min内,该吸附剂对水中Sb(V)的吸附快速达到吸附平衡状态。最佳的反应pH值范围为2.82~4.30。水中共存的SO_4~(2-)对该吸附剂的Sb(V)吸附量的影响较为显著,而Cl~-、NO_3~-的影响相对较小。该吸附剂对废水中Sb(V)的去除率达98.9%,出水中残余锑浓度满足《锡、锑、汞工业污染排放标准(GB30770-2014)》中锑的排放浓度限值。     

基于氮化碳纳米粒子荧光检测金离子

基于金离子[Au(Ⅲ)] 对氮化碳纳米粒子的荧光具有很强的猝灭作用, 构建了一种检测Au(Ⅲ)的荧光传感器. 实验结果表明, 该传感体系检测Au(Ⅲ)的线性范围为0.050~11.0 μmol/L, 检出限(S/N=3) 为22.6 nmol/L. 此外, 该传感器对Au(Ⅲ)的检测具有高选择性, 可用于湖水中Au(Ⅲ)的检测.     

掺铁羟基磷灰石对铅镉砷的去除性能研究

采用超声-微波水热的方法制备羟基磷灰石过程中添加FeCl3.6H2O,得到对铅（Pb）、镉(Cd)、砷(As) 均具有去除能力的弱晶态掺铁羟基磷灰石（Fe-HAP）材料。通过X射线衍射、Ｘ射线光电子能谱、比表面积分析等研究了Fe-HAP的结构性质,并探究了不同合成工艺下对吸附As(Ⅴ)、Pb2+、Cd2+的影响,并通过设计正交实验对各因素进行分析评估。结果表示：对As(Ⅴ)的去除,最佳掺铁量为40%、pH为9.5、超声-微波时间为15min,最大饱和吸附量为49.4 mg/g;对Pb2+、Cd2+的去除,最佳掺铁量为20%、pH为11、超声功率为200W、超声-微波时间为15min,最大饱和吸附量为1000mg/g、339.3 mg/g。正交试验验证表明Fe/(Fe+Ca)摩尔比是影响材料吸附Pb2+、Cd2+的最主要的因素;而对于吸附As(Ⅴ),合成pH的影响最大。Fe-HAP对Pb2+、Cd2+、As(Ⅴ)的去除归因于吸附-沉淀作用。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Microwave-assisted copper-catalyzed stereoselective ring expansion of three-membered heterocycles with α-diazo-β-dicarbonyl compounds

Microwave-assisted copper-catalyzed ring expansions of three-membered heterocycles with α-diazo-β-dicarbonyl compounds were investigated. Thiiranes generated 3-acyl-5,6-dihydro-1,4-oxathiines in the presence of copper sulfate and trans-3-acyl-5,6-dihydro-1,4-oxathiines as stereospecific products for 1,2-disubstituted cis-thiiranes through an intramolecular S_N2 process. Oxiranes gave rise to 2-acyl-5,6-dihydro-1,4-dioxines under the catalysis of copper hexafluoroacetylacetonate and cis-3-acyl-5,6-dihydro-1,4-dioxines as stereospecific products for 1,2-disubstituted cis-oxiranes via an intimate ion-pair mechanism. The current method provides a direct and simple strategy in efficient preparation of 3-acyl-5,6-dihydro-1,4-oxathiines and 2-acyl-5,6-dihydro-1,4-dioxines, important agents in medicinal and agricultural chemistry, from readily available thiiranes and oxiranes, respectively.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.