六角氮化硼(h-BN)对单层硒化铟(InSe)的调制效应及这一新结构的电子性质

采用基于密度泛函理论的第一性原理计算和分析了三种InSe/h-BN异质结的结构和电子性质.研究发现InSe/h-BN异质结具有间接带隙特点,并且价带顶和导带底的贡献均来自于InSe,差分电荷密度表明体系中没有明显的电荷交换.通过体系能带结构,我们发现h-BN层对单层InSe有着明显的调控效应.对比纯粹应变调控下单层的InSe的能带结构,发现h-BN对InSe能带结构的调控效应实际上是由InSe和h-BN之间的相互作用而诱导的晶格应变引起的.我们的研究结果表明,单层InSe沉积或生长在不同h-BN片上可以获得不同的晶格应变,实现对单层InSe能带结构的有效调控.     

二硫化钨/石墨烯异质结的界面相互作用及其肖特基调控的理论研究

采用第一性原理方法研究了二硫化钨/石墨烯异质结的界面结合作用以及电子性质,结果表明在二硫化钨/石墨烯异质结中,其界面相互作用是微弱的范德瓦耳斯力.能带计算结果显示异质结中二硫化钨和石墨烯各自的电子性质得到了保留,同时,由于石墨烯的结合作用,二硫化钨呈现出n型半导体.通过改变界面的层间距可以调控二硫化钼/石墨烯异质结的肖特基势垒类型,层间距增大,肖特基将从p型转变为n型接触.三维电荷密度差分图表明,负电荷聚集在二硫化钨附近,正电荷聚集在石墨烯附近,从而在界面处形成内建电场.肖特基势垒变化与界面电荷流动密切相关,平面平均电荷密度差分图显示,随着层间距逐渐增大,界面电荷转移越来越弱,且空间电荷聚集区位置向石墨烯层方向靠近,导致费米能级向上平移,证实了肖特基势垒随着层间距的增加由p型接触向n型转变.本文的研究结果将为二维范德瓦耳斯场效应管的设计与制作提供指导.     

Computational screening of vdWs heterostructures of BSe with MoSe2 and WSe2 as sustainable hydrogen production materials

Recently, fabricating type-II vertical van der Waals (vdWs) heterostructure is a promising material for hydrogen production. The absorption capability, charge density distributions, band alignments and electronic properties of the monolayers and heterostructures are systematically investigated using computational studies. Using ab initio molecular dynamics, binding energy and phonon calculations, the stability of the heterostructures are verified. Both heterostructures are type-II materials, which can increase the separation of charge carriers. Moreover, the charge density difference and the potential drop across the interface of MSe₂/BSe creates a high built-in electric field that can prevent the recombination of charge carriers. We found that the visible-light optical properties of both heterostructures are much enhanced with suitable bandgap energy for water splitting. The band alignment suggests that the heterostructures straddle water redox potentials in acid solutions (0 < pH < 7). Our study predicted that MSe₂/BSe vdW heterostructures have great potential for photocatalytic hydrogen production.     

Electronic and optical properties of 3N-doped graphdiyne/MoS2 heterostructures tuned by biaxial strain and external electric field

The construction of van der Waals (vdW) heterostructures by stacking different two-dimensional layered materials have been recognised as an effective strategy to obtain the desired properties. The 3N-doped graphdiyne (N-GY) has been successfully synthesized in the laboratory. It could be assembled into a supercapacitor and can be used for tensile energy storage. However, the flat band and wide forbidden bands could hinder its application of N-GY layer in optoelectronic and nanoelectronic devices. In order to extend the application of N-GY layer in electronic devices, MoS₂ was selected to construct an N-GY/MoS₂ heterostructure due to its good electronic and optical properties. The N-GY/MoS₂ heterostructure has an optical absorption range from the visible to ultraviolet with a absorption coefficient of 10⁵ cm^-1. The N-GY/MoS₂ heterostructure exhibits a type-Ⅱ band alignment allows the electron-hole to be located on N-GY and MoS₂ respectively, which can further reduce the electron-hole complexation to increase exciton lifetime. The power conversion efficiency of N-GY/MoS₂ heterostructure is up to 17.77%, indicating it is a promising candidate material for solar cells. In addition, the external electric field and biaxial strain could effectively tune the electronic structure. Our results provide a theoretical support for the design and application of N-GY/MoS₂ vdW heterostructures in semiconductor sensors and photovoltaic devices.     

Intercalation of graphite and hexagonal boron nitride by lithium

Although graphite and hexagonal form of BN (h-BN) are isoelectronic and have very similar lattice structures, it has been very difficult to intercalate h-BN while there are hundreds of intercalation compounds of graphite. We have done a comparative first principles investigation of lithium intercalation of graphite and hexagonal boron nitride to provide clues for the difficulty of h-BN intercalation. In particular lattice structure, cohesive energy, formation enthalpy, charge transfer and electronic structure of both intercalation compounds are calculated in the density functional theory framework with local density approximation to the exchange-correlation energy. The calculated formation enthalpy of the considered forms of Li intercalated h-BN is found to be positive which rules out h-BN intercalation without externally supplied energy. Also, the Li(BN)₃ form of Li-intercalated h-BN is found to have a large electronic density of states at the Fermi level and an interlayer state that crosses Fermi level at the zone center; these properties make it an interesting material to investigate the role of interlayer states in the superconductivity of alkali intercalated layered structures. The most pronounced change in the charge distribution of the intercalated compounds is found to be charge transfer from the planar σ states to the π states.     

TiS2-graphene heterostructures enabling polysulfide anchoring and fast electrocatalyst for lithium-sulfur batteries: A first-principles calculation

Lithium-sulfur batteries have attracted attention because of their high energy density. However, the "shuttle effect" caused by the dissolving of polysulfide in the electrolyte has greatly hindered the widespread commercial use of lithium-sulfur batteries. In this paper, a novel two-dimensional TiS₂/graphene heterostructure is theoretically designed as the anchoring material for lithium-sulfur batteries to suppress the shuttle effect. This heterostructure formed by the stacking of graphene and TiS₂ monolayer is the van der Waals type, which retains the intrinsic metallic electronic structure of graphene and TiS₂ monolayer. Graphene improves the electronic conductivity of the sulfur cathode, and the transferred electrons from graphene enhance the polarity of the TiS₂ monolayer. Simulations of the polysulfide adsorption show that the TiS₂/graphene heterostructure can maintain good metallic properties and the appropriate adsorption energies of 0.98-3.72 eV, which can effectively anchor polysulfides. Charge transfer analysis suggests that further enhancement of polarity is beneficial to reduce the high proportion of van der Waals (vdW) force in the adsorption energy, thereby further enhancing the anchoring ability. Low Li₂S decomposition barrier and Li-ion migration barrier imply that the heterostructure has the ability to catalyze fast electrochemical kinetic processes. Therefore, TiS₂/graphene heterostructure could be an important candidate for ideal anchoring materials of lithium-sulfur batteries.     

Band gap engineering in silicene: A theoretical study of density functional tight-binding theory

In this work, we performed first principles calculations based on self-consistent charge density functional tight-binding to investigate different mechanisms of band gap tuning of silicene. We optimized structures of silicene sheet, functionalized silicene with H, CH₃ and F groups and nanoribbons with the edge of zigzag and armchair. Then we calculated electronic properties of silicene, functionalized silicene under uniaxial elastic strain, silicene nanoribbons and silicene under external electrical fields. It is found that the bond length and buckling value for relaxed silicene is agreeable with experimental and other theoretical values. Our results show that the band gap opens by functionalization of silicene. Also, we found that the direct band gap at K point for silicene changed to the direct band gap at the gamma point. Also, the functionalized silicene band gap decrease with increasing of the strain. For all sizes of the zigzag silicene nanoribbons, the band gap is near zero, while an oscillating decay occurs for the band gap of the armchair nanoribbons with increasing the nanoribbons width. At finally, it can be seen that the external electric field can open the band gap of silicene. We found that by increasing the electric field magnitude the band gap increases.     

Tunable electronic and optical properties of SnC/BAs heterostructure by external electric field and vertical strain

Based on the first-principles method, we investigate the electronic structure of SnC/BAs van der Waals (vdW) heterostructure and find that it has an intrinsic type-II band alignment with a direct band gap of 0.22 eV, which favors the separation of photogenerated electron–hole pairs. The band gap can be effectively modulated by applying vertical strain and external electric field, displaying a large alteration of band gap via the strain and experiencing an indirect-to-direct band gap transition. Moreover, the band gap of the heterostructure varies almost linearly with external electric field, and the semiconductor-to-metal transition can be realized in the presence of a strong electric field. The calculated band alignment and the optical absorption reveal that the SnC/BAs heterostructure could present an excellent light-harvesting performance. Our designed heterostructure is expected to have great potential applications in nanoelectronic devices and photovoltaics and optical properties.     

基于滑动势能面的二维材料原子尺度摩擦行为的量化计算

近年来,二维材料优异的摩擦特性成为人们关注的焦点,然而目前缺乏理论上对其摩擦力进行快速、有效、精确的计算预测方法.本文提出采用密度泛函理论计算真实体系的滑动势能面,利用得到的"数值型势能面"替代传统的解析势函数,并结合Prandtl-Tomlinson模型,量化求解具有复杂形状势能面的真实二维材料体系的摩擦行为.基于该方法,揭示了原子力显微镜实验中观察到的石墨烯Moire纹超晶格结构的双周期"黏-滑"摩擦现象;理论预测了二维材料异质结构的层间超低摩擦现象,相对于同质材料,其静摩擦力和滑动摩擦力均成数量级降低,发现势能面起伏和驱动弹簧刚度均会影响层间相对滑动路径,进而对层间的摩擦行为产生影响.该方法同样可拓展到其他van der Waals作用主导的界面摩擦体系.     

Electronic properties of the layer semiconductor InSe

The three-dimensional band structure of InSe is calculated by the tight-binding and pseudopotential methods. The two band structures have many features in common and both agree with most optical and photoemission data. The high ionicity of this compound is reflected in the low dispersion of the energy bands and is evidenced by a calculation of the total valence charge density.     

Characteristics of Li diffusion on silicene and zigzag nanoribbon

We perform a density functional study on the adsorption and diffusion of Li atoms on silicene sheet and zigzag nanoribbons. Our results show that the diffusion energy barrier of Li adatoms on silicene sheet is 0.25 eV, which is much lower than on graphene and Si bulk. The diffusion barriers along the axis of zigzag silicene nanoribbon range from 0.1 to0.25 eV due to an edge effect, while the diffusion energy barrier is about 0.5 eV for a Li adatom to enter into a silicene nanoribbon. Our calculations indicate that using silicene nanoribbons as anodes is favorable for a Li-ion battery.     

石墨烯过渡层对金属/SiC接触肖特基势垒调控的第一性原理研究

由于SiC禁带宽度大,在金属/SiC接触界面难以形成较低的势垒,制备良好的欧姆接触是目前SiC器件研制中的关键技术难题,因此,研究如何降低金属/SiC接触界面的肖特基势垒高度(SBH)非常重要.本文基于密度泛函理论的第一性原理赝势平面波方法,结合平均静电势和局域态密度计算方法,研究了石墨烯作为过渡层对不同金属(Ag,Ti,Cu,Pd,Ni,Pt)/SiC接触的SBH的影响.计算结果表明,单层石墨烯可使金属/SiC接触的SBH降低;当石墨烯为2层时,SBH进一步降低且Ni,Ti接触体系的SBH呈现负值,说明接触界面形成了良好的欧姆接触;当石墨烯层数继续增加,SBH不再有明显变化.通过分析接触界面的差分电荷密度以及局域态密度,SBH降低的机理可能主要是石墨烯C原子饱和了SiC表面的悬挂键并降低了金属诱生能隙态对界面的影响,并且接触界面的石墨烯及其与金属相互作用形成的混合相具有较低的功函数.此外,SiC/石墨烯界面形成的电偶极层也可能有助于势垒降低.     

石墨烯过渡层对金属/SiC接触肖特基势垒调控的第一性原理研究

由于SiC禁带宽度大,在金属/SiC接触界面难以形成较低的势垒,制备良好的欧姆接触是目前SiC器件研制中的关键技术难题,因此,研究如何降低金属/SiC接触界面的肖特基势垒高度(SBH)非常重要.本文基于密度泛函理论的第一性原理赝势平面波方法,结合平均静电势和局域态密度计算方法,研究了石墨烯作为过渡层对不同金属(Ag,Ti,Cu,Pd,Ni,Pt)/SiC接触的SBH的影响.计算结果表明,单层石墨烯可使金属/SiC接触的SBH降低;当石墨烯为2层时,SBH进一步降低且Ni,Ti接触体系的SBH呈现负值,说明接触界面形成了良好的欧姆接触;当石墨烯层数继续增加,SBH不再有明显变化.通过分析接触界面的差分电荷密度以及局域态密度,SBH降低的机理可能主要是石墨烯C原子饱和了SiC表面的悬挂键并降低了金属诱生能隙态对界面的影响,并且接触界面的石墨烯及其与金属相互作用形成的混合相具有较低的功函数.此外,SiC/石墨烯界面形成的电偶极层也可能有助于势垒降低.     

Electronic properties of silicene in BN/silicene van der Waals heterostructures

Silicene is a promising 2D Dirac material as a building block for van der Waals heterostructures(vd WHs). Here we investigate the electronic properties of hexagonal boron nitride/silicene(BN/Si) vd WHs using first-principles calculations.We calculate the energy band structures of BN/Si/BN heterostructures with different rotation angles and find that the electronic properties of silicene are retained and protected robustly by the BN layers. In BN/Si/BN/Si/BN heterostructure, we find that the band structure near the Fermi energy is sensitive to the stacking configurations of the silicene layers due to interlayer coupling. The coupling is reduced by increasing the number of BN layers between the silicene layers and becomes negligible in BN/Si/(BN)_3/Si/BN. In(BN)_n/Si superlattices, the band structure undergoes a conversion from Dirac lines to Dirac points by increasing the number of BN layers between the silicene layers. Calculations of silicene sandwiched by other 2D materials reveal that silicene sandwiched by low-carbon-doped boron nitride or HfO_2 is semiconducting.     

Van Der Waals Heterostructures with Spin-Orbit Coupling

Herein, recent work on van der Waals (vdW) systems in which at least one of the components has strong spin-orbit coupling is reviewed, focussing on a selection of vdW heterostructures to exemplify the type of interesting electronic properties that can arise in these systems. First a general effective model to describe the low energy electronic degrees of freedom in these systems is presented. The model is then applied to study the case of (vdW) systems formed by a graphene sheet and a topological insulator. The electronic transport properties of such systems are discussed and it is shown how they exhibit much stronger spin-dependent transport effects than isolated topological insulators. Then, vdW systems are considered in which the layer with strong spin-orbit coupling is a monolayer transition metal dichalcogenide (TMD) and graphene-TMD systems are briefly discussed. In the second part of the article, a case is discussed in which the vdW system includes a superconducting layer in addition to the layer with strong spin-orbit coupling. It is shown in detail how these systems can be designed to realize odd-frequency superconducting pair correlations. Finally, twisted graphene-NbSe2 bilayer systems are discussed as an example in which the strength of the proximity-induced superconducting pairing in the normal layer, and its Ising character, can be tuned via the relative twist angle between the two layers forming the heterostructure.     

(单晶硅/电解液)界面对多孔硅形成初期阶段的影响

测量了在多孔硅形成初期阶段的电流I-电压V曲线,计算了硅表面原子吸附不同元素时电荷的转移量.指出在(单晶硅/电解液)界面处存在一电偶层,它影响着多孔硅材料的形成和性质.讨论了制备中氢氟酸(HF)浓度、电流密度和光照等因素对材料形成的影响. 关键词：     

单层二硫化钼多相性质及相变的第一性原理研究

本文基于密度泛函的第一性原理,并引入范德瓦耳斯力修正,研究了单层二硫化钼2H,1T,ZT三种相的电学性质及相变原理.首先通过结构弛豫确定了三种相的几何结构,能带和态密度计算证实1T相具有金属性质,ZT相具有半导体性质,带隙为0.01 eV.然后结合变形势理论计算了2H和ZT相的迁移率,ZT相的迁移率高达104cm~2·V~(-1)·s~(-1),进一步拓展了单层二硫化钼的应用范围.最后通过对比三种相吸附锂原子结合能,计算2H-1T相变能量曲线,解释了引起二硫化钼相变的原因.本文的研究结果将对单层二硫化钼实验制备表征以及相关光电器件性能分析提供重要参考.     

A quantitative approach to ionic adsorption

Binding properties of multi-atomic systems with ionic bonds are calculated by using a recently developed method based on the density functional formalism. The charge density is obtained from a superposition of the respective atomic densities where the charge transfer between these atoms is chosen such that the total energy attains a minimum. The kinetic energy of the electrons can to a very good approximation be calculated by means of a modified Thomas-Fermi-v. Weizsäcker expression. The molecules NaCl and NaW and a NaW₄ cluster have been treated as model systems for ionic interaction. Moreover, we have computed the binding properties of a Na atom adsorbed on a W(100) surface. This particular problem is the primary subject of the present study. The calculations yield binding energies, binding distances, vibrational frequencies, and induced dipole moments.     

碳纳米管光学天线的有效波长和谐振特性

将经典金属自由电子气模型应用于金属型碳纳米管, 基于光学天线有效波长理论, 得出了金属型碳纳米管光学天线响应的有效波长与碳纳米管介电特性之间的普适关系. 在对碳纳米管介电特性进行第一性原理计算的基础上, 以金属型4 Å碳纳米管为例, 进一步研究了金属型碳纳米管光学天线响应的有效波长与入射波长之间的关系, 以及金属型碳纳米管光学偶极子天线的谐振特性. 通过将已有传统金属光学天线和碳纳米管天线有效波长的研究结果进行对比, 验证了本文理论的正确性. 结果表明, 碳纳米管光学天线响应的有效波长与入射波长呈近似线性关系, 与传统金属材料构成的同直径光学天线相比, 碳纳米管天线显示出了更强的波长压缩能力, 并且在可见光到红外波段内易于发生谐振. 该研究方法可为碳纳米管光学天线研究提供新的思路.     

氢修饰石墨烯纳米带压电性质的第一性原理研究

采用第一性原理计算方法, 系统研究了不同宽度、不同边缘修饰模式的间隔氢吸附锯齿型石墨烯纳米带的压电性质. 结构优化和结合能计算表明, 氢修饰石墨烯纳米带结构稳定. 氢原子间隔排列的吸附使得纳米带中的相邻碳原子成键及电荷状态不同, 导致拉伸时纳米带中六元碳环的正负电荷中心不再重合, 产生宏观电极化. 纳米带宽度越宽, 包含六元碳环数目越多, 则拉伸时纳米带长度方向上电偶极矩密度越大, 其压电性能越强. 另外, 边缘原子电荷状态决定了无拉伸时纳米带的初始电偶极矩密度, 其大小可以通过改变边缘氢原子的修饰模式来有效调控. 关键词： 石墨烯纳米带 第一性原理 修饰改性 压电性质